ݺߣ

ݺߣShare a Scribd company logo

Test sieves with shaker

•
•
H
hydrologyproject0

The document specifies requirements for test sieves with a shaker. It requires stainless steel sieves that are 200mm in diameter, 50mm in height, and have nominal aperture sizes between 63-250 micrometers. It also requires a shaker capable of holding at least 5 sieves that runs on 220V power. Accessories include a sieve brush and wash bottle. Some sieves can be used manually without the shaker.

1 of 2
Download to read offline
20.019 TEST SIEVES WITH SHAKER Approval Date: 20 May 1998 Reviewed on : 23 October 2007 Version: 1 Equipment Specification: TEST SIEVES WITH SHAKER Version 1 20.019-1/2 Purpose The test sieves with shaker will be used for grain size distribution analyses in compliance with IS 6339 1971. Conditions & Requirements • The sieves shall be supplied with cover and receiver. • The sieves shall comply with IS 460(Part-I)-1985. • The sieve mesh size shall be clearly and permanently marked on the sieves. • The sieve mesh shall have a square layout. • The sieve mesh shall be of a sturdy and stable construction and shall withstand frequent use, brushing and cleaning. Specifications 1. Sieves material stainless steel diameter 200 mm height 50 mm nominal aperture sizes 63, 75, 90, 125, 180, 212 and 250 µm 2. Shaker size and capacity for at least 5 sieves power supply 220 VAC ±25%, 47 to 53 Hz Accessories • Sieve brush • Wash bottle Remarks The sieves of size 212 and 75 may be used for manual course-medium-fine analyses. The shaker may be omitted then.
20.019 TEST SIEVES WITH SHAKER As per HP-I Approval Date: 20 May 1998 Version: 1 Equipment Specification: TEST SIEVES WITH SHAKER Version 1 20.019-2/2 Purpose The test sieves with shaker will be used for grain size distribution analyses in compliance with IS 6339 1971. Conditions & Requirements • The sieves shall be supplied with cover and receiver. • The sieves shall comply with IS 460(Part-I)-1985. • The sieve mesh size shall be clearly and permanently marked on the sieves. • The sieve mesh shall have a square layout. • The sieve mesh shall be of a sturdy and stable construction and shall withstand frequent use, brushing and cleaning. Specifications 3. Sieves material stainless steel diameter 200 mm height 50 mm nominal aperture sizes 63, 75, 90, 125, 180, 212 and 250 µm 4. Shaker size and capacity for at least 5 sieves power supply 220 VAC ±25%, 47 to 53 Hz Accessories • Sieve brush • Wash bottle Remarks The sieves of size 212 and 75 may be used for manual course-medium-fine analyses. The shaker may be omitted then.

More Related Content

Test sieves with shaker

  • 1. 20.019 TEST SIEVES WITH SHAKER Approval Date: 20 May 1998 Reviewed on : 23 October 2007 Version: 1 Equipment Specification: TEST SIEVES WITH SHAKER Version 1 20.019-1/2 Purpose The test sieves with shaker will be used for grain size distribution analyses in compliance with IS 6339 1971. Conditions & Requirements • The sieves shall be supplied with cover and receiver. • The sieves shall comply with IS 460(Part-I)-1985. • The sieve mesh size shall be clearly and permanently marked on the sieves. • The sieve mesh shall have a square layout. • The sieve mesh shall be of a sturdy and stable construction and shall withstand frequent use, brushing and cleaning. Specifications 1. Sieves material stainless steel diameter 200 mm height 50 mm nominal aperture sizes 63, 75, 90, 125, 180, 212 and 250 µm 2. Shaker size and capacity for at least 5 sieves power supply 220 VAC ±25%, 47 to 53 Hz Accessories • Sieve brush • Wash bottle Remarks The sieves of size 212 and 75 may be used for manual course-medium-fine analyses. The shaker may be omitted then.
  • 2. 20.019 TEST SIEVES WITH SHAKER As per HP-I Approval Date: 20 May 1998 Version: 1 Equipment Specification: TEST SIEVES WITH SHAKER Version 1 20.019-2/2 Purpose The test sieves with shaker will be used for grain size distribution analyses in compliance with IS 6339 1971. Conditions & Requirements • The sieves shall be supplied with cover and receiver. • The sieves shall comply with IS 460(Part-I)-1985. • The sieve mesh size shall be clearly and permanently marked on the sieves. • The sieve mesh shall have a square layout. • The sieve mesh shall be of a sturdy and stable construction and shall withstand frequent use, brushing and cleaning. Specifications 3. Sieves material stainless steel diameter 200 mm height 50 mm nominal aperture sizes 63, 75, 90, 125, 180, 212 and 250 µm 4. Shaker size and capacity for at least 5 sieves power supply 220 VAC ±25%, 47 to 53 Hz Accessories • Sieve brush • Wash bottle Remarks The sieves of size 212 and 75 may be used for manual course-medium-fine analyses. The shaker may be omitted then.