More Related Content
What's hot (19)
Similar to Thermobreak Thermacoil - Brochure 270814 D (20)
Thermobreak Thermacoil - Brochure 270814 D
- 1. Applications VRF pipe insulation DX pipe insulation Multi unit inverter split systems Single inverter split systems Cool/freezer room pipe insulation Features Non Slit Tube in 15m coils from 6mm to 19mm in 20mm, 25mm wall, with or without R410A Refrigerant grade copper pipe Non Slit Tube in 5m lengths from 6mm to 42mm in 20mm, 25mm, 40mm wall 2m Non Slit also available Other wall thicknesses available on request Benefits Compliant to NCC minimum R-Values for refrigeration systems Aluminium foil vapour seal to ensure long term performance 4 ZERO Fire Rated to AS1530.3 Green Star compliant (low VOC) NATSPEC listed FM 4924 approved Copper tube manufactured to AS/NZS 1571 AUSTRALIAN MADE PRE-INSULATED PIPE INSULATION PHYSICALLYC R O S S L I N K E D S E K I S U I T E C H N O L O G Y Thermacoil
- 2. Installation Accessories THERMALOC Sections lock easily together Tough and durable Closed cell so will not absorb moisture AS1530.3 compliant foil faced No erosion with pipe movement Made from recycled materials and is recyclable FI-BLOCK Achieves a FRL of -/120/120 (Conditional to system type. Contact Sekisui Foam Australia for specific details). No metal sleeves required Easy installation over in-situ piping Fully tested to AS1530.4 and AS4072 Technical Data Material: Physically (irradiation) crosslinked polyolefin foam with factory applied reinforced foil. Density: 25kg/m3 (foam core only) Thermal Conductivity: 0.032 W/mK @ 23属 C mean (ASTM C518) temperature Water Vapour Permeability: 8.19 x 10-15 kg/Pa.s.m (ASTM E96) (0.029 mg.m/N.h) Water Absorption by Volume: < 0.1% (0.00038g/cm2 ) (JIS K6767) Resistance to Fungi: Zero Growth (ASTM G21) Operating Temperature: -80属 C to 100属 C Fire Rating AS1530.3(1999) Spread of Flame Index: 0 Heat Evolved Index: 0 Ignitability Index: 0 Smoke Developed Index: 0-1 R Values-compliant with NCC, Section J 5.4 Wall thickness (mm) 10 15 20 25 30 35 40 50 Pipe ID (mm) Thermobreak - minimum R Value 6 0.60 1.01 1.46 1.95 2.47 3.02 3.58 4.76 9 0.53 0.89 1.30 1.73 2.20 2.68 3.19 4.25 12 0.49 0.82 1.19 1.59 2.02 2.46 2.93 3.91 15 0.46 0.77 1.12 1.49 1.89 2.30 2.74 3.66 19 0.44 0.73 1.04 1.39 1.76 2.15 2.55 3.41 22 0.42 0.70 1.00 1.33 1.69 2.06 2.44 3.27 25 0.41 0.68 0.97 1.29 1.63 1.98 2.35 3.14 27 0.41 0.67 0.95 1.26 1.59 1.94 2.30 3.07 32 0.39 0.64 0.91 1.21 1.52 1.85 2.19 2.92 34 0.39 0.63 0.90 1.19 1.49 1.82 2.16 2.87 38 0.38 0.62 0.88 1.15 1.45 1.76 2.09 2.78 42 0.38 0.61 0.86 1.13 1.41 1.72 2.03 2.70 * For R Values on larger pipes contact Sekisui Foam Australia. AUSTRALIAN MADE PRE-INSULATED PIPE INSULATION Thermobreak is a registered trademark of Sekisui Chemical Co. Ltd. or its subsidiaries. SiZE AvAiLABiLiTy Other sizes available on request. 8-mm 50m X 1200 mm rolls 10-mm 20m X 1200 mm rolls 12-mm 20m X 1200 mm rolls 15-mm 20m X 1200 mm rolls 20-mm 20m X 1200 mm rolls 25~50-mm 2300mm X 1200mm sheets Product Certification may be plant specific. Please consult with your local representative. Technical Specifications Distributed by Thailand Plant 700/329 Moo 6, Amata Nakorn Industrial Estate, Tumbol Donhua-Ioh, Amphur Muang Chonburi 20000 Tel: +66 38 213219-26 Email: info@thaisekisui.co.th Web: www.thaisekisui.co.th Australian Plant 1-5 Parraweena Rd, PO BOX 2898, Taren Point NSW 2229 Australia Tel: +61 2 9525 9880 Email: info@sekisuifoam.com.au Web: www.sekisuifoam.com.au PHySiCAL PRoPERTiES Material: Physically (irradiation) crosslinked closed cell polyolefin foam with factory applied reinforced aluminium foil and acrylic adhesive backing Density: 25 kg/m3 (foam core only) Thermal Conductivity: 0.032 W/m/属K (@ 23属C mean temp.) (ASTM C518) 0.036 W/m/属K (@ 36属C mean temp.) Water vapour Permeability: 8.19 x 10-15 kg/Pa.s.m (ASTM E96) (0.029 mg.m/N.h) Water vapour Permeance: 3.3 x 10-4 g/MN.s Water absorption by volume: <0.1% v/v (JIS K6767) (0.00038 g/cm2 ) Permeability Resistance Factor: 亮 > 20,000 Resistance to fungi: Zero Growth (ASTM G21) ozone Resistance: Excellent Uv Resistance: Excellent Noise Reduction Coefficient: 0.20 (12mm foam thickness) (ISO 354) 0.30 (25mm foam thickness) operating Temperature Range: -80 属C ~ +100 属C (no adhesive) GreenStar Rating: Low VOC Emitting (ASTM D5116) Physical Property Requirements: COMPLIES (Type II - Sheet) (ASTM C1427) REACH Directives: COMPLIES (1907/2006/EC) FiRE AND SMoKE BEHAvioUR BS476 Parts 6 & 7: CLASS 0 AS1530 Part 3 Ignitability Index: 0 Spread of Flame Index: 0 Heat Evolved Index: 0 Smoke Developed Index: 0-1 ASTM E84: COMPLIES (NFPA 90A & B) Flame Spread Index: <25 Smoke Developed Index: <50 ASTM C411: COMPLIES (NFPA 90A & B) FM 4924 Thermobreak Sheet APPROVED Up to 25mm thickness AS 3837 BCA Group Number: 1 Smoke Index: 250 BS 6853 Annex B Smoke Toxicity COMPLIES (R < 1.0) iMo MSC 61(67) Part 2 Smoke Toxicity COMPLIES iSo 5659 Part 2 Smoke Density COMPLIES (IMO MSC 61(67) Part 2) Dm < 200 Satisfies max allowable concentrations for the following combustion gases: CO, HCl, HBr, HF, HCN, NOx, SO2 UL 94 Horizontal Burn APPROVED (HF-1) Thermaloc pro鍖le ensures an airtight 鍖nish Thermaloc decreases installation time as it locks easliy together Closed cell so that it will not absorb moisture or degrade with time Made of high density PE foam Will not erode with pipe movement AS1530.3 compliant foil faced Made from recycled material and is recyclable Youngbo Australia 15/853 Nudgee Road Northgate QLD 4013 Tel: +61 7 3267 7100 Fax: +61 7 3267 7166 www.youngbo.com.au CFC FREE X-Linked X-Linked Polyolefin ThermalocThermaloc TM Hot & Cold Pipe Supports Thermobreak速 Thermoloc is a lightweight and extremely tough closed cell polyethylene foam pipe support. Lock together profile decreases installation time and ensures airtight finish Closed cell will not absorb moisture or degrade over time Does not erode with pipe movement AS1530.3 compliant foil faced HOT & COLD PIPE SUPPORTS Thermaloc PHYSICALLYC R O S S L I N K E D S E K I S U I T E C H N O L O G Y Thermacoil Sekisui Foam Australia Head Office 1-5 Parraweena Rd, PO Box 2898, Taren Point NSW 2229 Australia Tel: +61 2 9525 9880 Fax: +61 2 9525 8004 Email: info@sekisuifoam.com.au Web: www.sekisuifoam.com.au Queensland Branch 15/853 Nudgee Rd, PO Box 448, Northgate QLD 4013 Australia Tel: +61 7 3267 7100 Fax: +61 7 3267 7166 Email: info@sekisuifoam.com.au Web: www.sekisuifoam.com.au