際際滷

際際滷Share a Scribd company logo

Tk 80

Download as PPT, PDF
vinay kumar
vinay kumar

1) This document provides instructions for customizing memory channels on a radio by writing frequency, emission mode, alphanumeric display data, and transmit power limit to channels in different write modes. 2) It outlines entering memory channel selector mode then describes the receive frequency, transmit frequency, emission mode, alphanumeric display, and transmit power limit write modes for customizing channels. 3) The write modes are entered sequentially by pressing DATA and allow setting digits with the DIAL and moving between digits with SCAN to fully program each memory channel.

1 of 15
Download to read offline
Tk 80
Tk 80
Tk 80
Tk 80
Tk 80
Tk 80
Tk 80
Contents to be customized Mode to be used Purpose Receive frequency Receive frequency write mode To write memory channelsTransmit frequency Transmit frequency write mode Type of emission [ mode] Type of emission [MODE] write mode Alphanumeric display Alphanumeric display data write mode Transmit power limit Transmit power limit write mode Set function Menu mode Select function setting - Memory channel selector mode To select memory channels
Procedure 1) Press [POWER] while depressing [MENU] and [MODE}. Press [DIAL] or any key, and enter Memory channel selector mode. 1. Memory channel selector mode (01) This mode is for selector memory channels when writing frequency and other information to memory channels. 1) When [DIAL] is turned, channels including those not entered in memories are switched continuously. 2) Pressing [DATA] enables the receive frequency write mode- 2. Receive frequency write mode (00.000.00) This mode is for writing receive frequency to memory channels. Frequency is set in single digits starting from the 10MHz to the 10Hz digit . The 1Hz digit is defaulted to 0. Turning the [DIAL] changes the digit to its minimum frequency setting. When the setting of one digit is completed, press [SCAN] to move to the next digit. Digits are set in order from the 10MHz digit to the 10Hz digit. (When setting the 10Hz digit, for example, and the display shows 1 2.345.56)(00.000.00) Pressing [DATA] enables the transmit frequency write mode.
3. Transmit frequency write mode This mode is for writing transmit frequency to the memory channels. Frequency is set in single digits starting from the 10M Hz digit to the 10 Hz digit. The 1Hz digit is defaulted to 0. 1) Turning the [DIAL] changes the digit to its minimum frequency setting. 2) When the setting of one digit is completed, press [SCAN] to move to the next digit. Digits are set in order from the 10MHz digit to the 10Hz digit. 3) Pressing [DATA] enables the type of emission (MODE) write mode. (When setting the 10Hz digit, for example, and the display shows 12.345.56) 4) When wishing to use the memory channel as a receive- only channel, set all digits to 0 , then press [DATA] to enable the type of emission (MODE) write mode.
4. Type of emission (MODE) write mode (USB) This mode is used to write the type of emission to the memory channel. 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2). Pressing [DATA] enables the alphanumeric display data write mode. 5. Alphanumeric display data write mode (Blank) This mode is used to write alphanumeric display data (up to 7 digits) to the memory channels 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2) Digit are set starting from the left side. Pressing (SCAN] moves one digit position to the right. 3) Pressing [DATA] changes control to the: Transmit power limit write mode(when specified diode D7 is installed) Memory channel selector mode (when specified diode D7 is not installed)
6. Transmit power limit write mode (100W) This mode is used to write the transmit power limit to the memory channel. 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2) Press [DATA] to enable the memory channel switching mode. Dealer menu mode
Tk 80
Tk 80
Tk 80

More Related Content

Tk 80

  • 8. Contents to be customized Mode to be used Purpose Receive frequency Receive frequency write mode To write memory channelsTransmit frequency Transmit frequency write mode Type of emission [ mode] Type of emission [MODE] write mode Alphanumeric display Alphanumeric display data write mode Transmit power limit Transmit power limit write mode Set function Menu mode Select function setting - Memory channel selector mode To select memory channels
  • 9. Procedure 1) Press [POWER] while depressing [MENU] and [MODE}. Press [DIAL] or any key, and enter Memory channel selector mode. 1. Memory channel selector mode (01) This mode is for selector memory channels when writing frequency and other information to memory channels. 1) When [DIAL] is turned, channels including those not entered in memories are switched continuously. 2) Pressing [DATA] enables the receive frequency write mode- 2. Receive frequency write mode (00.000.00) This mode is for writing receive frequency to memory channels. Frequency is set in single digits starting from the 10MHz to the 10Hz digit . The 1Hz digit is defaulted to 0. Turning the [DIAL] changes the digit to its minimum frequency setting. When the setting of one digit is completed, press [SCAN] to move to the next digit. Digits are set in order from the 10MHz digit to the 10Hz digit. (When setting the 10Hz digit, for example, and the display shows 1 2.345.56)(00.000.00) Pressing [DATA] enables the transmit frequency write mode.
  • 10. 3. Transmit frequency write mode This mode is for writing transmit frequency to the memory channels. Frequency is set in single digits starting from the 10M Hz digit to the 10 Hz digit. The 1Hz digit is defaulted to 0. 1) Turning the [DIAL] changes the digit to its minimum frequency setting. 2) When the setting of one digit is completed, press [SCAN] to move to the next digit. Digits are set in order from the 10MHz digit to the 10Hz digit. 3) Pressing [DATA] enables the type of emission (MODE) write mode. (When setting the 10Hz digit, for example, and the display shows 12.345.56) 4) When wishing to use the memory channel as a receive- only channel, set all digits to 0 , then press [DATA] to enable the type of emission (MODE) write mode.
  • 11. 4. Type of emission (MODE) write mode (USB) This mode is used to write the type of emission to the memory channel. 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2). Pressing [DATA] enables the alphanumeric display data write mode. 5. Alphanumeric display data write mode (Blank) This mode is used to write alphanumeric display data (up to 7 digits) to the memory channels 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2) Digit are set starting from the left side. Pressing (SCAN] moves one digit position to the right. 3) Pressing [DATA] changes control to the: Transmit power limit write mode(when specified diode D7 is installed) Memory channel selector mode (when specified diode D7 is not installed)
  • 12. 6. Transmit power limit write mode (100W) This mode is used to write the transmit power limit to the memory channel. 1) Turning the [DIAL] triggers a display that scrolls continuously in the following order: 2) Press [DATA] to enable the memory channel switching mode. Dealer menu mode