Transmission and Distribution Maintenance Coatings
0 likes259 views
The document provides cleaning and coating recommendations for steel surfaces with varying levels of rust, labeled R-1 through R-5. It specifies cleaning methods such as hand tool cleaning, power tool cleaning, and blast cleaning. It also recommends spot priming and full finish coating with two products: Induron's E-Bond 100% solids penetrating sealer and Induraguard 9200. Application rates of 1-2 mils for the primer and 8-10 mils for the finish coat are provided.
Transmission and Distribution Maintenance Coatings
- 1. firm
- 2. R-l (00/o to 0.lolo Rust) o SSPC-SP-2 Hand Tool Clean c Spot Prime with Induron's E-Bond l00o/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFT o Full Finish Coat of Induron's Induraguard 9200 @ B mils to l0 mils R-2 (0.10/o to lolo Rust) o SSPC-SP-2 Hand Tool Clean Rusted Areas o Spot Primewith lnduron's E-Bond l00o/o Solids Penetrating Sealer @ 'l.0 milsto 2.0 mils DFT c Full Finish Coat of lnduron's Induraguard 9200 @ B mils to l0 mils R-I (lolo to l0o/o Rust) o SSPC-SP-5 Power Tool Clean Rusted Areas c Spot Prime with Induron's E-Bond 1000/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFf o Full Finish Coat of lnduron's lnduraguard 9200 @ B mils to l0 mils R-4 (lOolo to 500/o Rust) o SSPC-SP-l I Power Tool Clean to Bare Metal o Full Prime with Induron's E-Bond 1000/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFf o Full Finish Coat of lnduron's lnduraguard 9200 @ B mils to l0 mils R-5 (Over 500/o Rust) o SSPC-SP-l I Power Tool Clean to Bare Metal or SSPC-SP6 Commercial Blast Clean Clean o Full Prime with lnduron's E-Bond l00o/o Solids Penetrating Sealer @ 1.0 mils to 2.0 mils DFI o Full Finish Coat of Induron's lnduraguard 9200 @ B mils to l0 mils Look Beneath The Sut{ace. PROTECTIVE COATINGS lnduron Coatings Inc. r -l I il J555 KlcnarC ArnnSTOn Jr. blvo l Birmi ngham, Alabama 3523H303 Phone: 205-324-9584' 800-324'9584 Fax: 205-320-5220 induron.com . Email: info@induron.com