際際滷

際際滷Share a Scribd company logo
INTRODUCTION

I was allotted industry/practice based started w.e.f 15th june to 25th july 2009. of 45 days duration
at TATA MOTORS as subject to partial fulfillment of B.Tech. Degree associated with 2nd year
from PTU jalander.


This project was mainly based on :
Repair & maintenance of cars.


       TATA cars are modern generation total intion vehicals.
       TATA cars run below 4.5-5 lacs
       Main models of TATA cars are:
   1) TATA INDICA
   2) TATA INDIGO
   3) TATA SAFARI
   4) TATA SUMO
   5) TATA NANO




                                                                                  B.TECH MECH. ENGG.
SOME SAFETY PRECAUTIONS TO BE OBSERVED IN THE
                        WORKSHOP

       Always ensure that all the repair/ maintain work carried out should be as per instructions
provided into the workshop manual.
       Use protecting clothes, apron, hand gloves and safety shoes while working in the workshop.
Dont wear rings and belt while serving the vehicles
       Keep your work area, equipment & tools clean at all times.
       Make sure you see the proper tool for the job &use it the write way. The improper tool can
damage the part you can damage the part you are working on or cause or both.
       Never keep the tool on vehicles. The tool should be kept in the tool box after use.
       Cover fenders, seats, steering wheel any other parts those are likely to get soiled before starting
any service work.
       Prior the removing parts, they must be inspected carefully to isolate the cause for which the
service is caused for .
       Never reuse the parts like off scales, gaskets, packing, orings, locking washers, self locking nuts
& other parts.
       Plug the ports /opening of aggregates such as FIP/injectors, TMC etc, wheneven removed from
the care.
       For correct reinstallations of vacuumfuel hoses attached a tag describing the correct position.
       Make sure only the recommended lubricant, coolent, corrosion protection coating & sealant are
used




                                                                                 B.TECH MECH. ENGG.

More Related Content

Ty

  • 1. INTRODUCTION I was allotted industry/practice based started w.e.f 15th june to 25th july 2009. of 45 days duration at TATA MOTORS as subject to partial fulfillment of B.Tech. Degree associated with 2nd year from PTU jalander. This project was mainly based on : Repair & maintenance of cars. TATA cars are modern generation total intion vehicals. TATA cars run below 4.5-5 lacs Main models of TATA cars are: 1) TATA INDICA 2) TATA INDIGO 3) TATA SAFARI 4) TATA SUMO 5) TATA NANO B.TECH MECH. ENGG.
  • 2. SOME SAFETY PRECAUTIONS TO BE OBSERVED IN THE WORKSHOP Always ensure that all the repair/ maintain work carried out should be as per instructions provided into the workshop manual. Use protecting clothes, apron, hand gloves and safety shoes while working in the workshop. Dont wear rings and belt while serving the vehicles Keep your work area, equipment & tools clean at all times. Make sure you see the proper tool for the job &use it the write way. The improper tool can damage the part you can damage the part you are working on or cause or both. Never keep the tool on vehicles. The tool should be kept in the tool box after use. Cover fenders, seats, steering wheel any other parts those are likely to get soiled before starting any service work. Prior the removing parts, they must be inspected carefully to isolate the cause for which the service is caused for . Never reuse the parts like off scales, gaskets, packing, orings, locking washers, self locking nuts & other parts. Plug the ports /opening of aggregates such as FIP/injectors, TMC etc, wheneven removed from the care. For correct reinstallations of vacuumfuel hoses attached a tag describing the correct position. Make sure only the recommended lubricant, coolent, corrosion protection coating & sealant are used B.TECH MECH. ENGG.