Universal Aluminum Side-of-Pole Mount
2 likes926 views
This document describes a universal aluminum solar panel bracket mounting system for mounting solar panels to poles. The bracket is designed for quick and secure installation of PV modules to a single pole. It uses high strength aluminum and corrosion resistant hardware. The bracket can be adjusted to various tilt angles for maximizing solar production and can be adjusted by one person. It is suitable for mounting most common solar panels ranging from 60W to 330W.
Universal Aluminum Side-of-Pole Mount
- 1. By Melon info@link-solar.com www.link-solar.com Universal Aluminum Solar panel bracket
- 2. Maximum Strength Single Pole PV Mounting System By side pole mount bracket LINK SOLAR multi solar panel pole mount is designed to install quickly and provide a secure mounting structure for PV modules on a single pole. The module-speci鍖c design reduces the number of components and provides for an easy assembly. The BSM utilizes high strength aluminum components and corrosion resistant hardware for long term reliability. Seasonal adjustability for maximizing production is provided by several tilt-angle settings and is a one person operation. Speci鍖cations Mounting Type Side of Pole/Wall Mount Material 5052-H32 aluminum Module Type Mono or poly solar panels for most solar brand Number of Module 60 to 160W, 2-4pcs,or 2pcs up to 330W Setting Angle 30属-60属(full range) Wind Load 100Kkm/Hr Snow Loading 1.1Kn/｡ Warranty 5 years By Melon info@link-solar.com www.link-solar.com 1-1 1-2 1-3 1-6 1-6 1-5 LS-AL-B4
- 3. Component parts Introduction The Side-of-Pole Mount is a simple and straight forward pole mounting solution for small area solar photovoltaic (PV) needs. With its user settable angle adjustment, it can support installations in a wide range of locations. In addition, Our bracket can custom-made according customer solar panel size. It can suit 1pcs or 2pcs or more solar panels in lie alongside Diagram Component Material Surface treatment Quantity 1-1 Fixed Bracket 5052AL anodized 2 1-2 Solar panel support rack 5052AL anodized 2 1-3 Support Rails 5052AL anodized 2 1-4 Clips AIS304 polishing 4 1-5 U Bolt AIS304 polishing 4 1-6 Screws for bracket AIS304 polishing 14 By Melon info@link-solar.com www.link-solar.com ! ! ! ! !
- 4. The pole diameters from 2.0 inches to 4.5-inches. 1. Installer Responsibility The installer is solely responsible for: Complying with all applicable local or national building codes, including any that may supersede this manual Ensuring that BrightSolar and other products are appropriate for the particular installation and the installation environment Ensuring that the selected mount can support the array under live load conditions Using only BrightSolar parts and installer-supplied parts as speci鍖ed by Bright Solar. Substitution parts may void the warranty Ensuring safe installation of all electrical aspects of the PV array. 2. Customer Support LINK SOLAR makes every effort to ensure your mounting kit is easy to install. If you need assistance at any point with your installation or have suggestions on how we can improve your experience, call link solar Solar customer support: 15397313355, or email to info@Link-solar.com 3. Component List The Universal Side-of-Pole Mount kit contains the following parts: Bucket x2 Attaches to the pole with the hose clamps, providing the link between the pole and the module/rail assembly U-bolts x4 Attach to the pole, holding the Bucket. These hose clamps are compatible with poles ranging from 2.0 inches to 4.5 inches Rail supports x4 Attach directly to the back of the module Clipsx4 Connecting the Bucket and rails, Support Rails inner Attach to the lower bucket, supporting the lower By Melon info@link-solar.com www.link-solar.com
- 5. edge of the panel 4. Assembly Step 1 - measuring the distance between mounting holes on the PV module Step 2 - mounting the rail supports on the PV module Secure the rails with bolt, lock washer, and hex nut in each of the 4 mounting holes. Tighten the bolts to 7 ft-lbs. Step 3 - attaching the clips to the rails Step4 - attaching the bucket to the pole Step 5 - Mounting the PV assembly on the pole By Melon info@link-solar.com www.link-solar.com
- 6. Step 6 - Attach support rails to the Lower Knee Brace Bucket Step 7 Connect the Lower support rails Step8 - Final Adjustment and Torque of Hardware Con鍖rm alignment of bucket and knee brace assembly, ensuring knee brace assembly is horizontal and perpendicular to pole. Tighten all hardware per speci鍖cations listed in the table above. By Melon info@link-solar.com www.link-solar.com