Pteridophytes are part of a large group of plants known as tracheophytes.
Tracheophytes are plants that have a vascular system that allows water and nutrients to move throughout the plant.
Lycopodium is a genus of small herbaceous or shrubby plants classified in the division Lycophyta. The modern representatives are small compared to related plants from the Carboniferous period that grew as large trees. Lycopodium species have small, simple leaves and produce homosporous sporangia. They have a heteromorphic life cycle with a subterranean gametophyte generation. Lycopodium species are found worldwide in tropical and subtropical forests. Some grow as epiphytes in the tropics. Traditional herbal medicine uses certain Lycopodium species.
This is a three chapter review for the Agriculture Major Admission Test conducted by the College of Agriculture of Cavite State University, the topicsare: Plant Bilogy, Crop and Agriculture and basic Physiological processes of plants. Credits to all my sourceswhich include lecture notes from our faculty, online sources and books published in the Republic of the Philippines.
Plants have several major organ systems that allow them to survive and reproduce. These include roots that absorb water and minerals, stems that provide structure and transport nutrients, leaves which perform photosynthesis, and reproductive structures like flowers and seeds. Plant tissues include meristematic tissues that facilitate growth and permanent tissues that carry out specialized functions. Together these organ systems and tissues enable key plant processes and allow plants to sustain life on Earth.
This document discusses the morphology and modifications of plant roots, stems, and flowering. It begins by defining plant morphology and classifying plants as annuals, biennials, or perennials. It then describes the typical structure and regions of a root, including the root cap, meristematic region, region of elongation, region of root hairs, and region of maturation. It discusses modifications like taproots and adventitious roots, and modifications for storage, respiration, and support. The document next describes the characteristics and modifications of stems, including underground, sub-aerial, and aerial modifications like rhizomes, tubers, bulbs, and others. It concludes by discussing the primary and secondary functions of roots.
This document discusses the morphology and modifications of plant roots, stems, and flowering. It begins by defining plant morphology and classifying plants as annuals, biennials, or perennials. It then describes the typical structure and regions of a root, including the root cap, meristematic region, region of elongation, region of root hairs, and region of maturation. It discusses modifications like taproots and adventitious roots, and modifications for storage, respiration, and support. The document next describes the characteristics and modifications of stems, including underground, sub-aerial, and aerial modifications like rhizomes, tubers, bulbs, and others. It concludes by discussing the primary and secondary functions of roots.
The leaf is a lateral structure borne on the stem that develops from nodes. Its main functions are photosynthesis and food production. Leaves originate from the shoot apical meristem and are arranged in acropetal order. A leaf has three main parts - the leaf base (hypopodium) which attaches the leaf to the stem, the petiole (mesopodium) which connects the lamina to the stem, and the lamina (epipodium) which is the broad, flattened photosynthetic part of the leaf. Stipules are lateral appendages found on either side of the leaf base that come in various shapes.
The document discusses the morphology and modifications of roots in plants. It describes the main regions and functions of typical roots, including the root cap, meristematic region, region of elongation, region of root hairs, and region of maturation. It also discusses two main root systems - tap roots and adventitious roots. Tap roots develop from the radicle and form a main tap root with branches. Adventitious roots develop from other parts like stems and leaves. Some roots are modified for specialized functions like storage, respiration, support, and parasitism.
Sphagnum, or peat moss, is a perennial bryophyte that grows in wet areas, forming dense mats. It has a unique leaf structure of chlorophyll-containing and hyaline cells. The gametophyte reproduces vegetatively through innovations, gemmae, and protonemal branches. Sexual reproduction involves antheridia and archegonia on separate monoecious or dioecious plants. Fertilization results in a sporophyte with a bulbous foot, spherical capsule, and columella containing haploid spores. Germination of spores forms a protonema that develops into a new gametophyte.
A leaf is a thin, flattened organ of vascular plants specialized for photosynthesis. While leaves are typically above ground and flat, leaves come in many forms and some structures that resemble leaves do not function as leaves.
Leaves have key adaptations for their photosynthetic function including structures like stomata to regulate gas exchange, a waxy cuticle to prevent water loss, and mesophyll tissue layers to maximize exposure to light. The type of leaf a plant develops depends on the light conditions where it lives.
This document discusses the functions and structures of plant stems. It describes stems as structures that support plants, conduct water and food, and store products like water, starch, and sugars. Stems are made up of nodes and internodes and contain buds. The document contrasts characteristics of herbaceous versus woody stems. It outlines secondary functions of stems including protection, photosynthesis, support, storage, and reproduction. Various specialized structures are defined, such as rhizomes, tubers, bulbs, corms, runners, stolons, offsets, suckers, tendrils, thorns, cladophylls, and phylloclades.
This document discusses the morphology and modifications of plant stems. It describes the basic structure of stems and their functions of transport, storage, and vegetative propagation. Various stem modifications are outlined for different purposes like food storage (tubers, bulbs, corms), support (tendrils), protection (thorns), and climbing. Aerial modifications include climbers, phylloclades, cladodes, and thorns. Underground modifications are bulbs, corms, rhizomes, and tubers. The document also discusses stem branching patterns.
Lycopodium is a genus of small herbaceous or shrubby plants classified in the division Lycophyta. It has about 180 species that are found worldwide, especially in tropical and subtropical forests. The modern representatives are small compared to related plants from the Carboniferous period that grew as large trees. Lycopodium plants have small, simple leaves and homosporous sporangia containing one type of spore. The gametophytes are subterranean and the sporophytes reproduce vegetatively. Some species are epiphytic with erect or pendant sporophytes, while others are terrestrial with trailing habits. Lycopodium sp. have traditional medicinal uses and Lycopodium powder is used
Kingdom Plantae is further classified on the basis of characteristics like absence or presence of seeds, vascular tissues, differentiation of plant body, etc.
This document discusses different types of inflorescences, which are clusters of flowers on a plant. It describes eight main types of racemose inflorescences: raceme, panicle, corymb, spike, spadix, umbel, capitulum, and catkin. For each type, it provides details on the structure of the flower cluster and examples of plant species that exhibit that inflorescence type.
The document discusses the morphology of flowering plants. It describes the root system as either taproot or fibrous, and the regions of the root including the root cap, region of elongation and region of maturation. Stems can be modified as tubers, bulbs, rhizomes or stolons for storage and support. Leaves originate from the stem and their venation and arrangement is described. Flowers make up the inflorescence and have four whorls - calyx, corolla, androecium and gynoecium. Their symmetry and arrangement on the thalamus is also detailed.
This document describes the key parts and functions of plants. It discusses the main plant organs - leaves, stems, roots, flowers, and fruits. It details the internal structures of leaves and stems, such as the vascular bundles, epidermis, mesophyll and chloroplasts in leaves. Common leaf and stem types are also outlined, such as simple vs compound leaves and herbaceous vs lignious stems. The roles of roots in absorption and support are noted. The document concludes with short descriptions of fruits and flowers, including their parts and types.
Plants have basic needs of temperature, light, water, air, nutrients, and space to grow. They are eukaryotes that can produce their own food through photosynthesis. Plants have two main stages in their life cycle - the sporophyte produces spores and the gametophyte produces sex cells. There are two divisions of plants - vascular plants that have transport tissues and nonvascular plants that do not. Nonvascular plants include mosses, liverworts, and hornworts while vascular plants are divided into spore producers like ferns and seed producers. Seed plants are further divided into gymnosperms like conifers that produce naked seeds and angiosperms that produce seeds in an enclosed ovary.
Asexual reproduction produces genetically identical offspring through mitosis without the fusion of gametes. It occurs through vegetative reproduction where a new plant grows from a part of the parent plant, such as through budding, root offshoots, stem cutting. The offspring are clones that resemble the parent plant completely and allow desirable traits to be passed on rapidly without fertilization or dispersal mechanisms.
The document discusses flowers, their structures and functions. It defines flowers as compressed shoots bearing floral leaves that are the reproductive structures of plants. The main external parts of a flower are described as sepals, petals, stamens and pistils. Variations in flower structures and types of inflorescences are covered. The development of pollen grains and ovules is summarized, as are the processes of pollination, fertilization and fruit/seed formation.
Leaves originate from buds and are attached to stems. They come in many shapes and forms but generally have the functions of photosynthesis, storing food, transpiration, gas exchange, and shading other plants. There are four basic types of leaves - simple, compound, peltate, and perfoliate. Leaves can also be modified for other purposes like tendrils for support, stipules and spines for protection, bud scales to protect buds, and storage leaves to store water. Some leaves are modified for reproduction, trapping insects, or having windows to collect water in dry climates.
Plants: Presentation One for Spaced Learningalkirk92
油
This document provides an overview of plant structures and classifications. It begins by describing nonvascular plants like mosses, which lack true roots, stems or leaves and rely on diffusion. Next, it covers seedless vascular plants like ferns and seed vascular plants like gymnosperms and angiosperms. Key details include the structures and functions of roots, stems, leaves and their tissues. It also explains the differences between monocots and dicots as well as reproductive structures like seeds, spores and their dispersal methods.
This document discusses the morphology of flowering plants. It describes the root system, which develops underground and absorbs water and minerals. It then describes the shoot system, which develops above ground and includes stems, leaves, flowers, and fruits. It discusses the different parts and modifications of roots, stems, leaves, buds, and flowers. It covers the structure, types, and functions of these plant structures.
Pteridophytes are vascular plants that reproduce via spores rather than seeds. They include ferns, horsetails, and lycophytes. Pteridophytes have well-differentiated roots, stems, and leaves. They reproduce through spores produced in sporangia. Ferns are the largest group of pteridophytes and can be homosporous or heterosporous.
The document discusses various modifications of stems and roots in plants. It describes underground stem modifications like rhizomes, bulbs, corms and tubers which store food. Aerial stem modifications include tendrils for climbing, thorns for protection, phylloclades, cladodes and bulbils for vegetative propagation. Root modifications comprise swollen storage roots, adventitious roots for support, haustoria for parasitic absorption, floating roots for buoyancy and epiphytic roots to absorb moisture from air.
This document discusses the structure and purpose of stems and leaves in plants. It covers the internal structure of stems, including the vascular system and differences between monocot and dicot stems. It also discusses leaf structure, function, and adaptations, including the location of epidermis, stomata, vascular bundles and mesophyll in leaf cross-sections. The learning objectives are to understand stem and leaf development, structure, function, and adaptations that allow plants to perform different roles like support, transport, photosynthesis, storage, and protection.
Leaf structure, adaptations, development Jasmine Brar
油
Leaves develop from leaf primordia in the shoot apical meristem. They have three main parts - the lamina, petiole, and leaf base. The lamina is the broad, typically green, photosynthetic part of the leaf. Leaves come in many shapes and sizes and have a variety of venation patterns and arrangements on the stem. Leaves also have many modified forms that take on additional functions like storage or reproduction.
Studies on effects of selected organic manures on growth parameters of certai...Aliya Fathima Ilyas
油
This document discuss about the Effects of selected Organic Manures on the growth parameters of certain medicinal plants of Tamil Nadu in various climatic conditions.
A leaf is a thin, flattened organ of vascular plants specialized for photosynthesis. While leaves are typically above ground and flat, leaves come in many forms and some structures that resemble leaves do not function as leaves.
Leaves have key adaptations for their photosynthetic function including structures like stomata to regulate gas exchange, a waxy cuticle to prevent water loss, and mesophyll tissue layers to maximize exposure to light. The type of leaf a plant develops depends on the light conditions where it lives.
This document discusses the functions and structures of plant stems. It describes stems as structures that support plants, conduct water and food, and store products like water, starch, and sugars. Stems are made up of nodes and internodes and contain buds. The document contrasts characteristics of herbaceous versus woody stems. It outlines secondary functions of stems including protection, photosynthesis, support, storage, and reproduction. Various specialized structures are defined, such as rhizomes, tubers, bulbs, corms, runners, stolons, offsets, suckers, tendrils, thorns, cladophylls, and phylloclades.
This document discusses the morphology and modifications of plant stems. It describes the basic structure of stems and their functions of transport, storage, and vegetative propagation. Various stem modifications are outlined for different purposes like food storage (tubers, bulbs, corms), support (tendrils), protection (thorns), and climbing. Aerial modifications include climbers, phylloclades, cladodes, and thorns. Underground modifications are bulbs, corms, rhizomes, and tubers. The document also discusses stem branching patterns.
Lycopodium is a genus of small herbaceous or shrubby plants classified in the division Lycophyta. It has about 180 species that are found worldwide, especially in tropical and subtropical forests. The modern representatives are small compared to related plants from the Carboniferous period that grew as large trees. Lycopodium plants have small, simple leaves and homosporous sporangia containing one type of spore. The gametophytes are subterranean and the sporophytes reproduce vegetatively. Some species are epiphytic with erect or pendant sporophytes, while others are terrestrial with trailing habits. Lycopodium sp. have traditional medicinal uses and Lycopodium powder is used
Kingdom Plantae is further classified on the basis of characteristics like absence or presence of seeds, vascular tissues, differentiation of plant body, etc.
This document discusses different types of inflorescences, which are clusters of flowers on a plant. It describes eight main types of racemose inflorescences: raceme, panicle, corymb, spike, spadix, umbel, capitulum, and catkin. For each type, it provides details on the structure of the flower cluster and examples of plant species that exhibit that inflorescence type.
The document discusses the morphology of flowering plants. It describes the root system as either taproot or fibrous, and the regions of the root including the root cap, region of elongation and region of maturation. Stems can be modified as tubers, bulbs, rhizomes or stolons for storage and support. Leaves originate from the stem and their venation and arrangement is described. Flowers make up the inflorescence and have four whorls - calyx, corolla, androecium and gynoecium. Their symmetry and arrangement on the thalamus is also detailed.
This document describes the key parts and functions of plants. It discusses the main plant organs - leaves, stems, roots, flowers, and fruits. It details the internal structures of leaves and stems, such as the vascular bundles, epidermis, mesophyll and chloroplasts in leaves. Common leaf and stem types are also outlined, such as simple vs compound leaves and herbaceous vs lignious stems. The roles of roots in absorption and support are noted. The document concludes with short descriptions of fruits and flowers, including their parts and types.
Plants have basic needs of temperature, light, water, air, nutrients, and space to grow. They are eukaryotes that can produce their own food through photosynthesis. Plants have two main stages in their life cycle - the sporophyte produces spores and the gametophyte produces sex cells. There are two divisions of plants - vascular plants that have transport tissues and nonvascular plants that do not. Nonvascular plants include mosses, liverworts, and hornworts while vascular plants are divided into spore producers like ferns and seed producers. Seed plants are further divided into gymnosperms like conifers that produce naked seeds and angiosperms that produce seeds in an enclosed ovary.
Asexual reproduction produces genetically identical offspring through mitosis without the fusion of gametes. It occurs through vegetative reproduction where a new plant grows from a part of the parent plant, such as through budding, root offshoots, stem cutting. The offspring are clones that resemble the parent plant completely and allow desirable traits to be passed on rapidly without fertilization or dispersal mechanisms.
The document discusses flowers, their structures and functions. It defines flowers as compressed shoots bearing floral leaves that are the reproductive structures of plants. The main external parts of a flower are described as sepals, petals, stamens and pistils. Variations in flower structures and types of inflorescences are covered. The development of pollen grains and ovules is summarized, as are the processes of pollination, fertilization and fruit/seed formation.
Leaves originate from buds and are attached to stems. They come in many shapes and forms but generally have the functions of photosynthesis, storing food, transpiration, gas exchange, and shading other plants. There are four basic types of leaves - simple, compound, peltate, and perfoliate. Leaves can also be modified for other purposes like tendrils for support, stipules and spines for protection, bud scales to protect buds, and storage leaves to store water. Some leaves are modified for reproduction, trapping insects, or having windows to collect water in dry climates.
Plants: Presentation One for Spaced Learningalkirk92
油
This document provides an overview of plant structures and classifications. It begins by describing nonvascular plants like mosses, which lack true roots, stems or leaves and rely on diffusion. Next, it covers seedless vascular plants like ferns and seed vascular plants like gymnosperms and angiosperms. Key details include the structures and functions of roots, stems, leaves and their tissues. It also explains the differences between monocots and dicots as well as reproductive structures like seeds, spores and their dispersal methods.
This document discusses the morphology of flowering plants. It describes the root system, which develops underground and absorbs water and minerals. It then describes the shoot system, which develops above ground and includes stems, leaves, flowers, and fruits. It discusses the different parts and modifications of roots, stems, leaves, buds, and flowers. It covers the structure, types, and functions of these plant structures.
Pteridophytes are vascular plants that reproduce via spores rather than seeds. They include ferns, horsetails, and lycophytes. Pteridophytes have well-differentiated roots, stems, and leaves. They reproduce through spores produced in sporangia. Ferns are the largest group of pteridophytes and can be homosporous or heterosporous.
The document discusses various modifications of stems and roots in plants. It describes underground stem modifications like rhizomes, bulbs, corms and tubers which store food. Aerial stem modifications include tendrils for climbing, thorns for protection, phylloclades, cladodes and bulbils for vegetative propagation. Root modifications comprise swollen storage roots, adventitious roots for support, haustoria for parasitic absorption, floating roots for buoyancy and epiphytic roots to absorb moisture from air.
This document discusses the structure and purpose of stems and leaves in plants. It covers the internal structure of stems, including the vascular system and differences between monocot and dicot stems. It also discusses leaf structure, function, and adaptations, including the location of epidermis, stomata, vascular bundles and mesophyll in leaf cross-sections. The learning objectives are to understand stem and leaf development, structure, function, and adaptations that allow plants to perform different roles like support, transport, photosynthesis, storage, and protection.
Leaf structure, adaptations, development Jasmine Brar
油
Leaves develop from leaf primordia in the shoot apical meristem. They have three main parts - the lamina, petiole, and leaf base. The lamina is the broad, typically green, photosynthetic part of the leaf. Leaves come in many shapes and sizes and have a variety of venation patterns and arrangements on the stem. Leaves also have many modified forms that take on additional functions like storage or reproduction.
Studies on effects of selected organic manures on growth parameters of certai...Aliya Fathima Ilyas
油
This document discuss about the Effects of selected Organic Manures on the growth parameters of certain medicinal plants of Tamil Nadu in various climatic conditions.
Microbial Biotransformation of Pesticides(xenobiotics).pptxAliya Fathima Ilyas
油
* Biotransformation is the chemical modification made by an organism on a chemical compound, often associated with change in pharmacologic and toxicologic activity.
* Caryophyllaceae is also known as pink family. Members of this family are well known for ornamental purposes.
* This family is well represented in the British Flora and many species are cultivated as ornamental garden flowers.
* The members of this family are commonly found in the temperate regions of the Northern Hemisphere.
*Reference - Taxonomy of Angiosperms - Dr. B. P. Pandey
This document contains 29 multiple choice questions related to environmental science. The questions cover topics such as remote sensing, multi-attribute decision making, life cycle assessment, water chemistry, atmospheric lifting mechanisms, hazardous waste classification, biological diversity, water vapor collection materials, greenhouse gas emissions agreements, biochemical oxygen demand testing, soil classification, sustainable development goals, rock classification, Indian wetlands, plastic bottle material selection, ozone layer depletion, coal microscopic units, environmental protection clauses in the Indian constitution, solid waste properties, coal analysis, sea water ion concentration, clay mineral properties, geochemical analysis techniques, bioreactor phase sequence, radar applications, atmospheric circulation patterns, compost benefits, and environmental assessment tools.
This document contains a summary of 17 multiple choice questions from the UGC NET exam for the Environmental Science paper. The questions cover topics such as boat speed calculations, statements about search engines and browsers, solar cell properties, communication definitions, abbreviations, education financing, and virtual lab tools. For each question, the correct multiple choice answer is provided.
* The Gymnosperms originated in the Devonian period of the Palaeozoic Era and formed the supreme vegetation in the Mesozoic Era.
* It was Robert Brown (1827) who first recognised gymnosperms as a separate entity among plant kingdom.
This document contains a UGC NET exam practice test with multiple choice questions covering various topics such as chemistry, biology, physics, environmental science and more. Some key details:
- There are 43 multiple choice questions testing knowledge across different subjects.
- Questions assess understanding of concepts like relative humidity, biodiversity, climate change, waste management and more.
- Each question has 4 answer options with the correct answer indicated.
The document provides information about a survey of employee transportation preferences across five companies (A-E). It includes a table with the number of employees who prefer using their own vehicle, metro, or bus for each company. It then lists five multiple choice questions about calculating various values from the data in the table, such as average number of employees, total number using metro from certain companies, ratios of bus users between companies, and differences in metro vs bus users across companies.
* The members of this family are mainly distributed in the tropical parts of the world. The plants occur mostly in dry regions.
* Several shrubby species of Capparis occur in the Mediterranean region.
* Reference - Taxonomy of Angiosperms - Dr. B. P. Pandey
* Water hyacinth is scientifically known as Eichhornia crassipes (Mart.) Solms and the common name is Lilac devil. Water hyacinth or water hyacinth is an herbaceous weed, succulent stem and has a flow (stolon) spanning the water surface.
* Water hyacinth is considered invasive throughout the world because it grows rapidly and can form thick mat over the water. These mats shade out the other aquatic plants. Eventually these shaded plants die and decay. Decaying process depletes the amount of dissolved oxygen in the water. Often waters below the water hyacinth masses become devoid of life.
Transcription machinery interacts with the template strand to produce an油mRNA油whose sequence resembles the coding strand.
Life on earth is said to have begun from self-replicating RNA since it is the only class of molecules capable of both catalysis and carrying genetic information.
Transcription maintains the link between these two molecules and allows cells to use a stable油nucleic acid油as the genetic material while retaining most of their油protein synthesis油machinery.
The scanning tunneling Microscope is an electron microscope that transmits three - dimensional images of the electron cloud around the nucleus.
The scanning tunneling Microscope (STM) works by scanning a very sharp metal wire tip over a surface. By bringing the tip very close to the surface, and by applying an electrical voltage to the tip or sample, we can image the surface at an extremely small scale - down to resolving individual atoms.
Water stress & physiological consequences in plant growth.pdfAliya Fathima Ilyas
油
Plants experience water stress either when the water supply to their roots becomes limiting or when the transpiration rate becomes intense.
Water stress may range from moderate, and of short duration, to extremely severe and prolonged summer drought that has strongly influenced evolution and plant life.
The physiological responses of plants to water stress and their relative importance for crop productivity vary with species, soil type, nutrients and climate.
Spatial data is of crucial importance to the Military Commander in the battle as it is for a decision maker in planning and development in a states growth.
Ministry of Defence in any country gathers data on routing, filtering, analysing and presenting information for decision-making.
The genetic code is the set of rules by which information encoded in genetic material (DNA or RNA sequences) is translated into proteins (amino acid sequences) by living cells.
The genetic code, once thought to be identical in all forms of life, has been found to diverge slightly in certain organisms and in the mitochondria of some eukaryotes.
Nevertheless, these differences are rare, and the genetic code is identical in almost all species, with the same codons specifying the same amino acids.
The membrane enclosing a cell is called cell membrane or plasma membrane (animal cells) and plasma lemma (plant cells).
It contains proteins and lipids in the ratio of 80 : 20 in bacteria on one extreme and on the other extreme 20 : 80 in some nerve cells.
The over all composition of most of the cell membranes is 40-50% protein and 50-60% lipids; both the components vary in their composition.
Neo Darwinians thought that adaptations result from multiple forces and natural selections is only one of these many forces.
This lead to the formulation of the Germplasm theory which states that any change to the somatoplam will not have an influence over the germplasm.
Blind Spots in AI and Formulation Science Knowledge Pyramid (Updated Perspect...Ajaz Hussain
油
This presentation delves into the systemic blind spots within pharmaceutical science and regulatory systems, emphasizing the significance of "inactive ingredients" and their influence on therapeutic equivalence. These blind spots, indicative of normalized systemic failures, go beyond mere chance occurrences and are ingrained deeply enough to compromise decision-making processes and erode trust.
Historical instances like the 1938 FD&C Act and the Generic Drug Scandals underscore how crisis-triggered reforms often fail to address the fundamental issues, perpetuating inefficiencies and hazards.
The narrative advocates a shift from reactive crisis management to proactive, adaptable systems prioritizing continuous enhancement. Key hurdles involve challenging outdated assumptions regarding bioavailability, inadequately funded research ventures, and the impact of vague language in regulatory frameworks.
The rise of large language models (LLMs) presents promising solutions, albeit with accompanying risks necessitating thorough validation and seamless integration.
Tackling these blind spots demands a holistic approach, embracing adaptive learning and a steadfast commitment to self-improvement. By nurturing curiosity, refining regulatory terminology, and judiciously harnessing new technologies, the pharmaceutical sector can progress towards better public health service delivery and ensure the safety, efficacy, and real-world impact of drug products.
How to Configure Restaurants in Odoo 17 Point of SaleCeline George
油
Odoo, a versatile and integrated business management software, excels with its robust Point of Sale (POS) module. This guide delves into the intricacies of configuring restaurants in Odoo 17 POS, unlocking numerous possibilities for streamlined operations and enhanced customer experiences.
Information Technology for class X CBSE skill SubjectVEENAKSHI PATHAK
油
These questions are based on cbse booklet for 10th class information technology subject code 402. these questions are sufficient for exam for first lesion. This subject give benefit to students and good marks. if any student weak in one main subject it can replace with these marks.
Database population in Odoo 18 - Odoo slidesCeline George
油
In this slide, well discuss the database population in Odoo 18. In Odoo, performance analysis of the source code is more important. Database population is one of the methods used to analyze the performance of our code.
QuickBooks Desktop to QuickBooks Online How to Make the MoveTechSoup
油
If you use QuickBooks Desktop and are stressing about moving to QuickBooks Online, in this webinar, get your questions answered and learn tips and tricks to make the process easier for you.
Key Questions:
* When is the best time to make the shift to QuickBooks Online?
* Will my current version of QuickBooks Desktop stop working?
* I have a really old version of QuickBooks. What should I do?
* I run my payroll in QuickBooks Desktop now. How is that affected?
*Does it bring over all my historical data? Are there things that don't come over?
* What are the main differences between QuickBooks Desktop and QuickBooks Online?
* And more
APM People Interest Network Conference 2025
-Autonomy, Teams and Tension: Projects under stress
-Tim Lyons
-The neurological levels of
team-working: Harmony and tensions
With a background in projects spanning more than 40 years, Tim Lyons specialised in the delivery of large, complex, multi-disciplinary programmes for clients including Crossrail, Network Rail, ExxonMobil, Siemens and in patent development. His first career was in broadcasting, where he designed and built commercial radio station studios in Manchester, Cardiff and Bristol, also working as a presenter and programme producer. Tim now writes and presents extensively on matters relating to the human and neurological aspects of projects, including communication, ethics and coaching. He holds a Masters degree in NLP, is an NLP Master Practitioner and International Coach. He is the Deputy Lead for APMs People Interest Network.
Session | The Neurological Levels of Team-working: Harmony and Tensions
Understanding how teams really work at conscious and unconscious levels is critical to a harmonious workplace. This session uncovers what those levels are, how to use them to detect and avoid tensions and how to smooth the management of change by checking you have considered all of them.
How to use Init Hooks in Odoo 18 - Odoo 際際滷sCeline George
油
In this slide, well discuss on how to use Init Hooks in Odoo 18. In Odoo, Init Hooks are essential functions specified as strings in the __init__ file of a module.
Computer Application in Business (commerce)Sudar Sudar
油
The main objectives
1. To introduce the concept of computer and its various parts. 2. To explain the concept of data base management system and Management information system.
3. To provide insight about networking and basics of internet
Recall various terms of computer and its part
Understand the meaning of software, operating system, programming language and its features
Comparing Data Vs Information and its management system Understanding about various concepts of management information system
Explain about networking and elements based on internet
1. Recall the various concepts relating to computer and its various parts
2 Understand the meaning of softwares, operating system etc
3 Understanding the meaning and utility of database management system
4 Evaluate the various aspects of management information system
5 Generating more ideas regarding the use of internet for business purpose
Digital Tools with AI for e-Content Development.pptxDr. Sarita Anand
油
This ppt is useful for not only for B.Ed., M.Ed., M.A. (Education) or any other PG level students or Ph.D. scholars but also for the school, college and university teachers who are interested to prepare an e-content with AI for their students and others.
How to Configure Flexible Working Schedule in Odoo 18 EmployeeCeline George
油
In this slide, well discuss on how to configure flexible working schedule in Odoo 18 Employee module. In Odoo 18, the Employee module offers powerful tools to configure and manage flexible working schedules tailored to your organization's needs.
The Constitution, Government and Law making bodies .saanidhyapatel09
油
This PowerPoint presentation provides an insightful overview of the Constitution, covering its key principles, features, and significance. It explains the fundamental rights, duties, structure of government, and the importance of constitutional law in governance. Ideal for students, educators, and anyone interested in understanding the foundation of a nations legal framework.
Research & Research Methods: Basic Concepts and Types.pptxDr. Sarita Anand
油
This ppt has been made for the students pursuing PG in social science and humanities like M.Ed., M.A. (Education), Ph.D. Scholars. It will be also beneficial for the teachers and other faculty members interested in research and teaching research concepts.
4. Fragmentation of the plant body - The dichotomously branched plant body, under favourable
conditions, breaks up into a number of pieces. Each portion is capable of growing into an adult plant,
e.g., Selaginella rupestries, Lycopodium phlegmaria and L. squarrosum.
By progressive death of older part of the stem - The apical young dichotomous branches of the
mature plant body owing to the death of the other part of the stem, sever their connections from it
and behave as independent plants, e.g., Lycopodium innudatum.
Vegetative buds - In Lycopodium innudatum, the whole plant
except the apical tip of the rhizome dies during winter. But on the
return of a favourable season this tip behaves as a resting bud and
germinates into a new plant.
Leafy bulbous buds are developed in certain plants, such as
Lycopodium phlegmaria and L.phyllanthus. These develop at the
base of the main stem and get separated from it. These develop into
new sporophytic plants.
5. According to Ludwig (1911), rudiments of buds and roots develop at the nodes in Equisetum
arvense, E. limosum and E. schaffneri. Each bud is capable of regenerating into a complete plant
with aerial shoots, rhizome and nodes.
In some cases adventitious buds develop on the roots, e.g., Ophioglossom pendulum, O.
attichisoni and O. vulgatum. These when detached regenerate into new plants.
Holloway (1939), reported the occurrence of buds on gametophytes of Psilotum. These are similar
in function to the buds described earlier but differ from them in originating from a single cell.
6. Gemmae - These are multicellular structures which develop on the rhizome as is the case in
Psilotum nudum, on new stem tips in Lycopodium selago and L. lucidulum or from cortical cells of
the root, e.g., L. ramulosum.
Bulbils - Protocorm-like bulbils develop in Lycopodium cernuum, L. ramulosum and Selaginella.
These differ from the protocorm in that there is no foot. These regenerate into new plants.
Tubers these are thick-walled spherical structures containing a reserve of food. These may develop
in Selaginella either at the end of vegetative branches forming surface-tubers as in S.chrysocaulos
are developed at the ends of filamentous modified vegetative branch forming underground tubers as
in the case with S. chrysorrhizos.
7. In case of Equisetum, the tubers may be ovoid as in E. arvense or pear-shaped, e.g., E. telmatia.
Sometimes, the tubers are formed in chains. These when detached from the parent plant, are capable
of developing into new plants.
In Marsilea hirsute tubers develop from the irregular side branches covered with imperfectly-
developed leaves, such tubers show tenacity of life and can withstand desiccation for long. On the
return of favourable conditions, each germinates to produce a new plant.
Root tubercles - Tubercles from roots develop in Lycopodium cernuum and L. ramulosum. These
when detached develop new plants directly.
By branching of the protocorm - In some cases e.g., Lycopodium laterate and L. ramulosum the
protocorm produces a number of branches. These branches are capable of developing into new
plants.