The document describes a vehicle gas detection system with an automatic safety warning system using GSM. The system uses a CO sensor to measure carbon monoxide levels inside a vehicle. If CO levels exceed a threshold, the system sends an alert via GSM to local authorities with details about the vehicle and CO levels. It also automatically locks the vehicle. The system is intended to detect dangerous gas buildup and notify emergency responders if occupants are unconscious from high CO exposure.
1 of 1
Downloaded 21 times
More Related Content
Vehicle gas detection with automatic safety warning system using gsm
1. VEHICLE GAS DETECTION WITH AUTOMATIC SAFETY
WARNING SYSTEM USING GSM
ABSTRACT
The process of working of this project is explained as follows.
The total equipment of this project is placed inside a vehicle. In this project we have CO
sensor which is interfaced to the microcontroller. Ignition switch is connected to the
microcontroller to ON or OFF Engine of vehicle. The amount of CO released from the
vehicle is measured by CO sensor. Whenever CO values exceed the threshold limit then
intimation is given to the RTA by using GSM technology with the level of CO and vehicle
details and vehicle is automatically locked.
BLOCK DIAGRAM
