Wainscotting
0 likes102 views
1) The document provides a list of materials needed to build a 4' section of wainscotting including the item, dimensions, and material for each part. 2) The main parts are a front panel, two inset panels, eight moulding strips, two hanging strips, a base support, base moulding, top cap, and cap cove made of materials like oak plywood, solid oak, plywood, and poplar. 3) Instructions note that for a corner section, one panel needs adjusted dimensions and a filler added to the mating panel.
Wainscotting
- 1. Schedule Of Materials: W ainscotting Parts needed for each 4' section: No. Item Dimensions T W L Material 1 5/8" 3/8" 1 1 Front panel 2" x 46" x 28" * OP 1 2 Inset panels 2" x 191 4" x 191 4" OP 1/16" 3 9 8 Moulding strips 4" x 16" x 20" SO 1 2 Hanging strips 4" x 2" x 46" Ply 1 Base support 3 4" x 21 2" x 46" P 3/4" Top 5/8" 1 Base moulding 3 4" x 4" x 46" SO cap 3 1 Top cap 4" x 2" x 46" SO 3 3 1 Cap cove 4" x 4" x 46" SO 1/16" *If building a corner, one panel needs to be 463 4" wide, and a 3" wide filler needs to be added to the mating panel. OP=Oak ply SO=Solid oak Ply= Plywood P=Poplar Hanging Front strip panel 1/4" Stock 3/4" x 3/4" 4 1/4" cove moulding 1/4" Front panel 1/8" Inset Inset Inset panel panel panel Stock 19 1/4" moulding strips with rabbeted edge Front panel Inset Inset panel panel 1/8" 32" Front panel 7/16" 5/16" Front panel 4 1/4" Inset Inset panel 3/8" panel Hanging 1/4" strip 4' x 8' sheet of 1/2" oak plywood Base Base 2 1/2" Support Moulding with ogee 3 5/8" profile 3/4"