WG18379 Construction Event Invite E
0 likes93 views
The Welsh Government Construction Sector and Wales BIM Hub are inviting attendees to an event called "BIM for Wales Preparing the Construction Sector for Building Information Modelling" to be held on April 29th, 2013 at the SWALEC Stadium in Cardiff. The event will provide industry experts to discuss the latest developments in Building Information Modelling (BIM) and showcase a real-life BIM case study. Attendees can also participate in workshops on topics such as using BIM for clients and the BIM supply chain. Registration will be from 9:30am to 10:00am, with the event concluding at 4:30pm.
1 of 1
Download to read offline
Ad
Recommended
Smart Incentives for Berlins Creative Industries - Projekt Zukunft/KEA workshop
Smart Incentives for Berlins Creative Industries - Projekt Zukunft/KEA workshopXinnovate
油
The document discusses the 'Smart Incentives for Berlin's Creative Industries' workshop held on October 16, 2014, aimed at optimizing growth and innovation within Berlin's creative and digital sectors. It highlights initiatives for networking, competitions, and the integration of design expertise to support small and medium-sized enterprises (SMEs) and facilitate links with scientific institutions. Furthermore, it mentions a portal dedicated to crowdfunding and crowdinvesting in Berlin's creative, media, and ICT industries, showcasing various funded projects.Made in Birmingham
Made in Birminghamfrazierzbcbxyflvz
油
The Birmingham Made Me event took place at Millennium Point from June 15 to 19, 2015, celebrating design-led manufacturing in the Midlands. The event featured various businesses and leaders from sectors like automotive and engineering, showcasing regional success stories through demonstrations and displays. The highlight was the innovation and design awards dinner, which recognized significant contributions in the manufacturing sector.Maurizio Gattiglio, EFFRA, IT
Maurizio Gattiglio, EFFRA, ITI4MS_eu
油
The European Factories of the Future Research Association (EFFRA) is an industry-led association representing private partners in a public-private partnership with the European Commission called Factories of the Future. EFFRA has over 160 members across Europe working to establish research priorities and coordinate over 200 projects funded by the Factories of the Future partnership under Horizon 2020, focusing on developing technologies like cyber-physical systems, zero-defect manufacturing, and human-robot collaboration to transform European manufacturing. EFFRA is developing a strategic roadmap called Factories of the Future 2020 to guide these research priorities and ensure they allow European industry to address challenges from trends like the fourth industrial revolution. Arnaud Zoubir, Alphanov, FR (Lashare)
Arnaud Zoubir, Alphanov, FR (Lashare)I4MS_eu
油
The document summarizes a project called LASHARE that developed an ultrafast laser to improve the coin manufacturing process. The laser allowed for faster and higher quality engraving of embossing tools without thermal effects. This led to the production of over 500 coins with unique visual effects in just over 3 hours, compared to over 24 hours previously. The I4MS funding scheme helped the partners, including a laser manufacturer, technology center, and coin mint, collaborate to develop this innovation and create new products and jobs.Max Lemke, Head of Unit, Components and Systems, European Commission
Max Lemke, Head of Unit, Components and Systems, European CommissionI4MS_eu
油
The document discusses regional digital innovation hubs and competence centers. Competence centers are the core of digital innovation hubs and are organized to provide services to industry, including access to infrastructure, technology expertise, experimentation support, product fabrication demonstrations, and best practices. Successful EU actions that the hubs aim to build on include 110M funding for 11 projects, 70 competence centers, and 280 experiments across 29 EU countries and associated nations.AMRA at InnoTrans
AMRA at InnoTransAmra_PDF
油
Bosch Engineering GmbH invites the customer to visit their booth at InnoTrans 2016 in Berlin from September 20-23 to see their tailor-made solution for digitalizing freight wagon fleets. They are located in Hall 20, Stand 310 and their AMRA team looks forward to meeting the customer and answering any questions about their asset monitoring for rail applications technology.Hristijan Miceski, Mikrosam, MK (Fortissimo)
Hristijan Miceski, Mikrosam, MK (Fortissimo)I4MS_eu
油
This document discusses Mikrosam's use of constrained multi-optimization and high performance computing (HPC) to improve the design of composites for high pressure vessels. Mikrosam worked with HPC providers to develop an adaptive algorithm that can optimize multiple objectives and constraints in parallel, accelerating the design process by 30%. This reduced material and labor costs by 10-20% and improved Mikrosam's branding. Moving forward, Mikrosam plans to replicate this work for other complex calculations and combine the optimization software with other composite property tools.Francesca Flamigni, Project Officer, Components and Systems, European Commiss...
Francesca Flamigni, Project Officer, Components and Systems, European Commiss...I4MS_eu
油
I4MS is a European Commission initiative with 4 phases running from 2013-2022 to foster digital industrial innovation. Phase 3 from 2016-2017 aims to nurture the I4MS ecosystem by concentrating on EU added value, linking with regional innovation hubs, and carrying out innovative experiments. It will establish a network of Competence Centers to support pan-European experiments across the manufacturing value chain using digital technologies. The goal is a critical mass of experiments to increase the competitiveness and market share of EU companies.Govert Gijsbers, TNO, NL (XS2I4MS)
Govert Gijsbers, TNO, NL (XS2I4MS)I4MS_eu
油
This document discusses the creation of digital innovation hubs through the I4MS initiative to spread excellence to less developed EU regions. Through open calls, 26 proposals were selected to establish new regional digital innovation hubs focused on areas like HPC, cloud computing, robotics, and IoT. These hubs will provide mentoring and small financial support up to 50k to local SMEs and stakeholders. I4MS will provide mentoring and coaching services to the new hubs on topics like engagement, technology partnerships, use case development, and business planning to help them become self-sustaining.Max Lemke, Head of Unit, Components and Systems, European Commission
Max Lemke, Head of Unit, Components and Systems, European CommissionI4MS_eu
油
The document discusses proposals for digitizing European industry through the establishment of digital innovation hubs and competence centers. It proposes measures to provide all sectors access to digital technologies and expertise in order to drive innovation in products, processes, and business models. This would be achieved through a network of digital innovation hubs across Europe providing industry access to technologies and expertise. The hubs would be centered around world-class competence centers organized to offer various services to industry.Luis Usatorre Irazusta, Tecnalia, ES
Luis Usatorre Irazusta, Tecnalia, ESI4MS_eu
油
The document summarizes the sCorPiuS project, which aims to create a European roadmap for cyber-physical systems in manufacturing. It conducted interviews and workshops with experts to understand the state of practice and key challenges. It identified 6 clusters of breakthroughs and obstacles. The gap analysis found issues like uncertain ROI of new business models, communication problems between new and old systems, and managing legacy technologies. The roadmap will provide recommendations to address both technical and soft aspects to support adoption of CPS in European manufacturing.Patrick Meneroud, Cedrat Technologies, FR (Intefix)
Patrick Meneroud, Cedrat Technologies, FR (Intefix)I4MS_eu
油
This document summarizes the INTEFIX project which developed an active damping and adaptive fixture solution for turning a large turbine casing. The solution uses Cedrat Technologies' MICA200M actuators and CSA96 power supplies integrated into the fixture to counteract vibrations during machining through closed-loop control. This improved precision, reduced tool breakage and scrapped parts. The project is expected to increase the partner ITP's productivity by 20% and generate annual savings of 27k Euro. It will also lead to new compact actuator and fixture products for Cedrat Technologies, providing increased revenue and jobs over five years.Francis Wray, Scapos, UK
Francis Wray, Scapos, UKI4MS_eu
油
Francis Wray from the University of Edinburgh discussed how the Fortissimo 2 project provides cloud-based high performance computing (HPC) simulation and analytics to enable better design through advanced simulation and better understanding via large-scale data processing. This significant computing power is needed but raises barriers for smaller companies; a pay-per-use, one-stop shop approach can help address this. Examples include using sensor data from production lines to optimize manufacturing, monitoring vehicle condition via real-time data processing, and optimizing gas detector layouts in hazardous plants.Ales Ude, Jozef Stefan Institute, SI (Reconcell
Ales Ude, Jozef Stefan Institute, SI (ReconcellI4MS_eu
油
The document describes a reconfigurable robot workcell that aims to reduce setup times for automated assembly processes in small and medium enterprises (SMEs). The workcell builds upon technologies from previous projects to be autonomous, low cost, and able to nearly automatically reconfigure for new assembly tasks. It will be implemented and tested on three use cases from different SMEs. The goals are to demonstrate innovation in assembly processes currently done manually and potential industrial impact. Metrics for reduced setup times are provided for comparison to current manual assembly processes commonly used by SMEs.Nikos Kexagias
Nikos KexagiasI4MS_eu
油
This document discusses Nanotypos, a company that uses roll-to-roll nanoimprint lithography to create large area functional surfaces. Nanotypos aims to transfer novel ideas and prototype devices from the lab to medium-to-high volume production while keeping costs moderate. The company has four business units and a pilot manufacturing line in Thessaloniki, Greece. It is developing techniques like seamless cylinder fabrication and laser machining to further scale up nanoimprint lithography for commercial applications.Christophe Leroux, CEA, FR (Horse)
Christophe Leroux, CEA, FR (Horse)I4MS_eu
油
The document discusses the HORSE project, which aims to foster the deployment of robotics technology in manufacturing industries. The project will establish Centers of Competence in four European countries to simplify access to robotics for SMEs and facilitate the integration of robots with existing machines and workflows. The Centers will offer expert support and advice on deploying robotic solutions for manufacturing applications in a way that allows safe human-robot interaction and reduces health risks for workers.Ia I
Ia IIndustrial Angles
油
Industrial Angles is a global magazine that has been in media and publishing for 3 years, catering to the cement, mining, steel, and power sectors. It aims to provide technical and insightful content to readers while also connecting customers to their target audiences. The magazine seeks to become an ideal media channel for products and concepts by maximizing traditional and technological advertising through its network and alliances. It has over 30 years of industrial experience and directly reaches key decision makers in target customer industries.MIDEST 2013 closing press release
MIDEST 2013 closing press releaseMIDEST, the global show for all industrial subcontracting know-how
油
Midest 2013, held from November 19-22 in Paris, showcased 1,702 exhibitors from 38 countries, maintaining visitor numbers despite a challenging economic backdrop. Notable highlights included South Africa as the first non-European country of the year, increased foreign participation, and well-attended lectures and events, reflecting a positive trend in industrial output and subcontracting. The event also facilitated 876 business meetings, underscoring the significance of networking within the industry.Andre Stork, Fraunhofer IGD, DE
Andre Stork, Fraunhofer IGD, DEI4MS_eu
油
This document discusses using high performance computing (HPC) capabilities in the cloud for simulation and analytics. It defines HPC as allowing for solving complex problems through massively parallel simulations, but notes it is expensive and knowledge-intensive. Cloud computing allows scaling resources on demand and paying only for what is used, but was traditionally not suited for HPC. The document outlines challenges of integrating HPC and cloud capabilities and provides three examples of application experiments, including using cloud-based design to increase renewable energy production, predicting drug targets and side effects in medicine, and optimizing microchip placement to free up space on a chip.Fabrizio Caccavale, Universit degli Studi della Basilicata, IT
Fabrizio Caccavale, Universit degli Studi della Basilicata, ITI4MS_eu
油
EuRoC is a European robotics competition that aims to strengthen the competitiveness of European robotics industries in production, logistics, and servicing. It consists of three industry-relevant challenges that are divided into stages of increasing complexity. The challenges involve manufacturing supply chains and favor technology transfer from academia to industry. Teams can receive up to 375k or 585k in grants depending on their performance. The goals are to benchmark algorithms on hosting platforms, facilitate partnerships between teams and industrial end users, and test solutions in real-world environments.Chinacoat trade show
Chinacoat trade showGloriaDylan
油
The Chinacoat trade show will take place from November 18-20, 2019, at the Shanghai New International Expo Centre in Shanghai, China, focusing on the coatings industry. The event aims to connect suppliers and manufacturers with global trade visitors, featuring various product categories such as pigments, solvents, and smart coatings. The previous edition in Guangzhou saw 35,540 trade visitors and 1,291 exhibitors from numerous countries.Silvia de la Maza, Innovalia Association, ES
Silvia de la Maza, Innovalia Association, ESI4MS_eu
油
The document summarizes the I4MS initiative, which aims to foster digital industrial innovation in Europe. It discusses the objectives of digitizing European industry and how I4MS supports this through two phases of projects and Digital Innovation Hubs. The event on June 23-24 in Amsterdam would provide more details on I4MS's work to date and community of stakeholders involved in supporting European manufacturers' digital transformation.Infographic 3D printing market in The Netherlands
Infographic 3D printing market in The NetherlandsABN AMRO
油
The document discusses the Dutch 3D-printing market forecast for 2015, estimating a total revenue of 45 million. It breaks down expected earnings from services and products, indicating professional market revenues at 22 million and home market revenues at 23 million. The document also outlines projections for various segments including materials, services, and personal printers.Ulrich Thombansen, Fraunhofer ILT, DE
Ulrich Thombansen, Fraunhofer ILT, DEI4MS_eu
油
This document provides information about the I4MS 2016 conference on fostering digital industrial innovation in Europe, which will take place on June 23-24 in Amsterdam. It discusses the Laser-based Additive Manufacturing for Europe (LASHARE) initiative, which involves assessments of laser-based manufacturing equipment used by industrial partners. The initiative involves 70 partner organizations working to advance 14 pieces of laser-based equipment. The document outlines how LASHARE has helped partners by building collaboration teams and providing revenue opportunities, and it encourages moving the initiative forward by conducting new equipment assessments and advancing solutions.Oscar Lazaro, Innovalia, ES (BEinCPPS)
Oscar Lazaro, Innovalia, ES (BEinCPPS)I4MS_eu
油
The document discusses an event called I4MS 2016 that will take place on June 23-24 in Amsterdam. The event aims to foster digital industrial innovation in Europe. One topic that will be covered is the adoption of Cyber-Physical Production Systems (CPPS) through an initiative called BEinCPPS, which provides manufacturing SMEs with knowledge and skills to implement CPPS at the field, factory, and cloud levels. I4MS also focuses on developing open platforms, industrial manufacturing infrastructures, business models, and partnerships to promote CPPS solutions and digital transformation.Oscar Gonzalo, Tekniker, ES
Oscar Gonzalo, Tekniker, ESI4MS_eu
油
The INTEFIX project aimed to develop intelligent fixture design methodologies using state-of-the-art software, hardware, sensors, and actuators. The project ran from July 2013 to June 2016 with a budget of over 10 million euros and involvement from 32 partners across industries, research, and academia. The objectives were to establish modular, configurable, fast, accurate, and durable fixture systems through experiments integrating technologies, developing adaptive fixtures, and addressing vibration, positioning, and deformation challenges in manufacturing.Total Telecom Roadshow 2018 Updated version available
Total Telecom Roadshow 2018 Updated version availableRob Chambers
油
The document outlines a series of global events scheduled for 2018, including locations and dates for conferences and awards in London, Brussels, and Singapore. It mentions various themes like digital transformation and connected Britain, emphasizing engaging and collaborative experiences. Contact information and social media links are provided for more details.Industry case study ip strategy HiLTI
Industry case study ip strategy HiLTIMIPLM
油
The document discusses Hilti's business model transformation to adapt to digitization in the construction industry, highlighting its historical innovations and competitive landscape. It emphasizes the importance of tailored solutions, sustainable practices, and continuous innovation to meet customer needs and maintain market differentiation. Additionally, it outlines Hilti's aims for 2020, including operational excellence and efficiency in service and equipment management.North West BIM Hub Event 1
North West BIM Hub Event 1Mark Stodgell
油
The document summarizes the agenda for a North West BIM Hub meeting. It includes:
- An introduction to the North West BIM Hub and what participants want from the hub in a roundtable discussion.
- A brief overview of BIM and the UK Government BIM Task Group.
- A presentation from John Lorimer on a regional and local BIM perspective.
- A discussion of BIM documents and standards including PAS 1192, COBie, and BIM protocols.
- Another roundtable discussion focused on barriers to BIM adoption and best practices.
- Next steps and conclusions from the meeting.Supporting the digital construction industry | Empowering you in a BIM world
Supporting the digital construction industry | Empowering you in a BIM worldThe NBS
油
The document discusses Building Information Modeling (BIM) and its significance in the digital construction industry, emphasizing collaboration and information sharing among stakeholders. It highlights the UK government's initiatives for BIM implementation to enhance efficiency and reduce costs in construction projects. The future agenda includes aims for lower emissions, expedited delivery, and improved cost management in the built environment.More Related Content
What's hot (20)
Govert Gijsbers, TNO, NL (XS2I4MS)
Govert Gijsbers, TNO, NL (XS2I4MS)I4MS_eu
油
This document discusses the creation of digital innovation hubs through the I4MS initiative to spread excellence to less developed EU regions. Through open calls, 26 proposals were selected to establish new regional digital innovation hubs focused on areas like HPC, cloud computing, robotics, and IoT. These hubs will provide mentoring and small financial support up to 50k to local SMEs and stakeholders. I4MS will provide mentoring and coaching services to the new hubs on topics like engagement, technology partnerships, use case development, and business planning to help them become self-sustaining.Max Lemke, Head of Unit, Components and Systems, European Commission
Max Lemke, Head of Unit, Components and Systems, European CommissionI4MS_eu
油
The document discusses proposals for digitizing European industry through the establishment of digital innovation hubs and competence centers. It proposes measures to provide all sectors access to digital technologies and expertise in order to drive innovation in products, processes, and business models. This would be achieved through a network of digital innovation hubs across Europe providing industry access to technologies and expertise. The hubs would be centered around world-class competence centers organized to offer various services to industry.Luis Usatorre Irazusta, Tecnalia, ES
Luis Usatorre Irazusta, Tecnalia, ESI4MS_eu
油
The document summarizes the sCorPiuS project, which aims to create a European roadmap for cyber-physical systems in manufacturing. It conducted interviews and workshops with experts to understand the state of practice and key challenges. It identified 6 clusters of breakthroughs and obstacles. The gap analysis found issues like uncertain ROI of new business models, communication problems between new and old systems, and managing legacy technologies. The roadmap will provide recommendations to address both technical and soft aspects to support adoption of CPS in European manufacturing.Patrick Meneroud, Cedrat Technologies, FR (Intefix)
Patrick Meneroud, Cedrat Technologies, FR (Intefix)I4MS_eu
油
This document summarizes the INTEFIX project which developed an active damping and adaptive fixture solution for turning a large turbine casing. The solution uses Cedrat Technologies' MICA200M actuators and CSA96 power supplies integrated into the fixture to counteract vibrations during machining through closed-loop control. This improved precision, reduced tool breakage and scrapped parts. The project is expected to increase the partner ITP's productivity by 20% and generate annual savings of 27k Euro. It will also lead to new compact actuator and fixture products for Cedrat Technologies, providing increased revenue and jobs over five years.Francis Wray, Scapos, UK
Francis Wray, Scapos, UKI4MS_eu
油
Francis Wray from the University of Edinburgh discussed how the Fortissimo 2 project provides cloud-based high performance computing (HPC) simulation and analytics to enable better design through advanced simulation and better understanding via large-scale data processing. This significant computing power is needed but raises barriers for smaller companies; a pay-per-use, one-stop shop approach can help address this. Examples include using sensor data from production lines to optimize manufacturing, monitoring vehicle condition via real-time data processing, and optimizing gas detector layouts in hazardous plants.Ales Ude, Jozef Stefan Institute, SI (Reconcell
Ales Ude, Jozef Stefan Institute, SI (ReconcellI4MS_eu
油
The document describes a reconfigurable robot workcell that aims to reduce setup times for automated assembly processes in small and medium enterprises (SMEs). The workcell builds upon technologies from previous projects to be autonomous, low cost, and able to nearly automatically reconfigure for new assembly tasks. It will be implemented and tested on three use cases from different SMEs. The goals are to demonstrate innovation in assembly processes currently done manually and potential industrial impact. Metrics for reduced setup times are provided for comparison to current manual assembly processes commonly used by SMEs.Nikos Kexagias
Nikos KexagiasI4MS_eu
油
This document discusses Nanotypos, a company that uses roll-to-roll nanoimprint lithography to create large area functional surfaces. Nanotypos aims to transfer novel ideas and prototype devices from the lab to medium-to-high volume production while keeping costs moderate. The company has four business units and a pilot manufacturing line in Thessaloniki, Greece. It is developing techniques like seamless cylinder fabrication and laser machining to further scale up nanoimprint lithography for commercial applications.Christophe Leroux, CEA, FR (Horse)
Christophe Leroux, CEA, FR (Horse)I4MS_eu
油
The document discusses the HORSE project, which aims to foster the deployment of robotics technology in manufacturing industries. The project will establish Centers of Competence in four European countries to simplify access to robotics for SMEs and facilitate the integration of robots with existing machines and workflows. The Centers will offer expert support and advice on deploying robotic solutions for manufacturing applications in a way that allows safe human-robot interaction and reduces health risks for workers.Ia I
Ia IIndustrial Angles
油
Industrial Angles is a global magazine that has been in media and publishing for 3 years, catering to the cement, mining, steel, and power sectors. It aims to provide technical and insightful content to readers while also connecting customers to their target audiences. The magazine seeks to become an ideal media channel for products and concepts by maximizing traditional and technological advertising through its network and alliances. It has over 30 years of industrial experience and directly reaches key decision makers in target customer industries.MIDEST 2013 closing press release
MIDEST 2013 closing press releaseMIDEST, the global show for all industrial subcontracting know-how
油
Midest 2013, held from November 19-22 in Paris, showcased 1,702 exhibitors from 38 countries, maintaining visitor numbers despite a challenging economic backdrop. Notable highlights included South Africa as the first non-European country of the year, increased foreign participation, and well-attended lectures and events, reflecting a positive trend in industrial output and subcontracting. The event also facilitated 876 business meetings, underscoring the significance of networking within the industry.Andre Stork, Fraunhofer IGD, DE
Andre Stork, Fraunhofer IGD, DEI4MS_eu
油
This document discusses using high performance computing (HPC) capabilities in the cloud for simulation and analytics. It defines HPC as allowing for solving complex problems through massively parallel simulations, but notes it is expensive and knowledge-intensive. Cloud computing allows scaling resources on demand and paying only for what is used, but was traditionally not suited for HPC. The document outlines challenges of integrating HPC and cloud capabilities and provides three examples of application experiments, including using cloud-based design to increase renewable energy production, predicting drug targets and side effects in medicine, and optimizing microchip placement to free up space on a chip.Fabrizio Caccavale, Universit degli Studi della Basilicata, IT
Fabrizio Caccavale, Universit degli Studi della Basilicata, ITI4MS_eu
油
EuRoC is a European robotics competition that aims to strengthen the competitiveness of European robotics industries in production, logistics, and servicing. It consists of three industry-relevant challenges that are divided into stages of increasing complexity. The challenges involve manufacturing supply chains and favor technology transfer from academia to industry. Teams can receive up to 375k or 585k in grants depending on their performance. The goals are to benchmark algorithms on hosting platforms, facilitate partnerships between teams and industrial end users, and test solutions in real-world environments.Chinacoat trade show
Chinacoat trade showGloriaDylan
油
The Chinacoat trade show will take place from November 18-20, 2019, at the Shanghai New International Expo Centre in Shanghai, China, focusing on the coatings industry. The event aims to connect suppliers and manufacturers with global trade visitors, featuring various product categories such as pigments, solvents, and smart coatings. The previous edition in Guangzhou saw 35,540 trade visitors and 1,291 exhibitors from numerous countries.Silvia de la Maza, Innovalia Association, ES
Silvia de la Maza, Innovalia Association, ESI4MS_eu
油
The document summarizes the I4MS initiative, which aims to foster digital industrial innovation in Europe. It discusses the objectives of digitizing European industry and how I4MS supports this through two phases of projects and Digital Innovation Hubs. The event on June 23-24 in Amsterdam would provide more details on I4MS's work to date and community of stakeholders involved in supporting European manufacturers' digital transformation.Infographic 3D printing market in The Netherlands
Infographic 3D printing market in The NetherlandsABN AMRO
油
The document discusses the Dutch 3D-printing market forecast for 2015, estimating a total revenue of 45 million. It breaks down expected earnings from services and products, indicating professional market revenues at 22 million and home market revenues at 23 million. The document also outlines projections for various segments including materials, services, and personal printers.Ulrich Thombansen, Fraunhofer ILT, DE
Ulrich Thombansen, Fraunhofer ILT, DEI4MS_eu
油
This document provides information about the I4MS 2016 conference on fostering digital industrial innovation in Europe, which will take place on June 23-24 in Amsterdam. It discusses the Laser-based Additive Manufacturing for Europe (LASHARE) initiative, which involves assessments of laser-based manufacturing equipment used by industrial partners. The initiative involves 70 partner organizations working to advance 14 pieces of laser-based equipment. The document outlines how LASHARE has helped partners by building collaboration teams and providing revenue opportunities, and it encourages moving the initiative forward by conducting new equipment assessments and advancing solutions.Oscar Lazaro, Innovalia, ES (BEinCPPS)
Oscar Lazaro, Innovalia, ES (BEinCPPS)I4MS_eu
油
The document discusses an event called I4MS 2016 that will take place on June 23-24 in Amsterdam. The event aims to foster digital industrial innovation in Europe. One topic that will be covered is the adoption of Cyber-Physical Production Systems (CPPS) through an initiative called BEinCPPS, which provides manufacturing SMEs with knowledge and skills to implement CPPS at the field, factory, and cloud levels. I4MS also focuses on developing open platforms, industrial manufacturing infrastructures, business models, and partnerships to promote CPPS solutions and digital transformation.Oscar Gonzalo, Tekniker, ES
Oscar Gonzalo, Tekniker, ESI4MS_eu
油
The INTEFIX project aimed to develop intelligent fixture design methodologies using state-of-the-art software, hardware, sensors, and actuators. The project ran from July 2013 to June 2016 with a budget of over 10 million euros and involvement from 32 partners across industries, research, and academia. The objectives were to establish modular, configurable, fast, accurate, and durable fixture systems through experiments integrating technologies, developing adaptive fixtures, and addressing vibration, positioning, and deformation challenges in manufacturing.Total Telecom Roadshow 2018 Updated version available
Total Telecom Roadshow 2018 Updated version availableRob Chambers
油
The document outlines a series of global events scheduled for 2018, including locations and dates for conferences and awards in London, Brussels, and Singapore. It mentions various themes like digital transformation and connected Britain, emphasizing engaging and collaborative experiences. Contact information and social media links are provided for more details.Industry case study ip strategy HiLTI
Industry case study ip strategy HiLTIMIPLM
油
The document discusses Hilti's business model transformation to adapt to digitization in the construction industry, highlighting its historical innovations and competitive landscape. It emphasizes the importance of tailored solutions, sustainable practices, and continuous innovation to meet customer needs and maintain market differentiation. Additionally, it outlines Hilti's aims for 2020, including operational excellence and efficiency in service and equipment management.MIDEST 2013 closing press release
MIDEST 2013 closing press releaseMIDEST, the global show for all industrial subcontracting know-how
油
Similar to WG18379 Construction Event Invite E (20)
North West BIM Hub Event 1
North West BIM Hub Event 1Mark Stodgell
油
The document summarizes the agenda for a North West BIM Hub meeting. It includes:
- An introduction to the North West BIM Hub and what participants want from the hub in a roundtable discussion.
- A brief overview of BIM and the UK Government BIM Task Group.
- A presentation from John Lorimer on a regional and local BIM perspective.
- A discussion of BIM documents and standards including PAS 1192, COBie, and BIM protocols.
- Another roundtable discussion focused on barriers to BIM adoption and best practices.
- Next steps and conclusions from the meeting.Supporting the digital construction industry | Empowering you in a BIM world
Supporting the digital construction industry | Empowering you in a BIM worldThe NBS
油
The document discusses Building Information Modeling (BIM) and its significance in the digital construction industry, emphasizing collaboration and information sharing among stakeholders. It highlights the UK government's initiatives for BIM implementation to enhance efficiency and reduce costs in construction projects. The future agenda includes aims for lower emissions, expedited delivery, and improved cost management in the built environment.Building information modelling report
Building information modelling reportKiran Birdi
油
The document is a seminar report on Building Information Modeling (BIM) submitted by Kirandeep Singh for a Bachelor of Technology degree in Civil Engineering. It outlines the importance of BIM in enhancing the architecture, engineering, and construction industries, emphasizing its ability to improve project efficiency, cost savings, and collaboration among stakeholders. The report also includes an overview of BIM's historical development, applications, benefits, and evolving maturity levels, with an emphasis on its relevance to infrastructure projects.Ramboll BIM 101
Ramboll BIM 101Graham H Stewart
油
Ramboll is a leading engineering, design and consultancy company founded in Denmark in 1945. They employ close to 10,000 experts across 21 countries and over 200 offices, with a significant presence in Northern Europe, India, Russia and the Middle East. Building information modeling (BIM) is a process involving digital representations of physical and functional characteristics of a facility across its lifecycle. The UK government has set a target of Level 2 BIM by 2016, requiring 3D models combined and coordinated in 3D space with enriched asset data. BIM aims to improve project coordination, quality, efficiency and sustainability.BIM in Project Management: Keynote Speech by Mr. Kevin POOLE
BIM in Project Management: Keynote Speech by Mr. Kevin POOLEThe Hong Kong Institute of Building Information Modelling (HKIBIM)
油
Mr. Kevin Poole discusses the global shift in the construction industry towards Building Information Modeling (BIM), emphasizing its adoption as a national strategy in various countries. The document outlines the benefits of BIM, including design analysis, safety management, and enhanced collaboration, while highlighting the urgency for Hong Kong to catch up in this area to maintain competitiveness in the Asia-Pacific region. It also details the initiatives and actions taken by the Construction Industry Council of Hong Kong to promote BIM implementation and training across the industry.BIM for Local Government - Presentation by John Lorimer, Local Government BIM...
BIM for Local Government - Presentation by John Lorimer, Local Government BIM...Clarkson Alliance
油
The document details the implementation of Building Information Modeling (BIM) within local government, highlighting its benefits such as improved efficiency, cost reductions, and better project delivery. It emphasizes the mandatory transition to fully collaborative BIM by 2016 for central government projects and outlines the strategies necessary to support this change in the construction industry. Additionally, it presents case studies showcasing real-life applications and the positive outcomes achieved through adopting BIM practices.The Future of BIM
The Future of BIMThe NBS
油
The document discusses Building Information Modeling (BIM) and its impact on the construction industry, emphasizing the importance of collaboration among designers and constructors to unlock efficiencies. It outlines the UK government's BIM strategy, including objectives for cost reduction, emissions reduction, and faster project delivery by 2025. Additionally, it highlights international standards and mandates for BIM adoption to improve construction practices globally.PLS 2014: BIM Why it needs careful thought
PLS 2014: BIM Why it needs careful thoughtInstitution of Lighting Professionals
油
The document introduces Building Information Modeling (BIM), outlining its definitions, advantages, challenges, and future developments. It highlights BIM's benefits, including cost savings, clash detection, and improved energy efficiency, while addressing concerns such as costs, personnel training, and confusion. Additionally, it emphasizes the importance of standards and the government's role in promoting BIM implementation for future construction strategies.BIM from Designers Perspective - Rob Jackson
BIM from Designers Perspective - Rob JacksonSchool of the Built Environment - University of Salford
油
The document discusses Bond Bryan Architects' use of Building Information Modeling (BIM) on projects. It provides details about the firm such as it was established in 1987, has 80 staff across 4 offices, and uses BIM on 90-95% of projects. The key benefits of BIM discussed are collaboration between stakeholders based on a shared model, its use beyond 3D to include data, and how it has evolved from a "lonely" to "social" process. Common myths about BIM such as file size, software requirements, and suitability only for large projects are also addressed.Untitled extract pages 0
Untitled extract pages 0Sergey Johnsonen
油
This document provides an executive summary of the National Building Information Modeling Standard (NBIMS) Version 1 - Part 1: Overview, Principles, and Methodologies.
The NBIMS aims to establish a standardized machine-readable information model for facilities that contains all relevant lifecycle information. This will improve planning, design, construction, operations and maintenance using BIM. This first publication communicates the scope, organization and development process of the NBIMS. It defines key BIM concepts including overall scope, data modeling requirements, and the need for information interoperability and a shared information repository. The goal is to establish international open standards to improve efficiency across the building lifecycle.BIM Roundtable Webinar 1/15/09
BIM Roundtable Webinar 1/15/09kpreddy
油
The document discusses the benefits of using Building Information Modeling (BIM) on construction projects. It provides an agenda for a BIM roundtable event featuring a panel of industry experts who will discuss topics like the drivers and economics of BIM adoption, how BIM impacts project design, construction, and facility management, examples of BIM reducing risks and improving quality, and the future of BIM use across the project lifecycle. Attendees of the webinar have a chance to win a free BIM ROI analysis for an upcoming project by emailing the event organizer.Building Information Systems in the Construction Industry Garrigos
Building Information Systems in the Construction Industry Garrigosgengasommoo0
油
Building Information Systems in the Construction Industry Garrigos
Building Information Systems in the Construction Industry Garrigos
Building Information Systems in the Construction Industry Garrigos1 andrew thomas, room 4
1 andrew thomas, room 4Faculty of Art, Design and the Built Environment
油
The document discusses the development and implications of Building Information Modelling (BIM) in the UK construction industry. It notes that a national BIM survey found most SME contractors have never used 3D modeling, clash detection, or other BIM tools. It also references reports showing UK construction projects often exceed budget and timelines. The document argues for adopting BIM to improve industry performance and sustainability by reducing waste and change orders. It outlines the UK government's plans to mandate collaborative 3D BIM by 2016 to achieve cost savings and lower carbon emissions from the construction sector.Building Information Modeling.pdf
Building Information Modeling.pdfHammadAmjad14
油
This presentation discusses the implementation of Building Information Modeling (BIM) for construction projects and developers. BIM is a digital representation of the physical and functional characteristics of a facility that allows for the automatic generation of drawings, reports, and design analysis. It provides benefits like faster conceptualization, design visualization, decision making, construction document generation, structural detailing, facility management, and cost estimation. Examples are given of various BIM projects including residential buildings, service planning, structural modeling, and commercial and residential interiors that demonstrate benefits like 3D visualization, clash detection, prefabrication, and energy analysis.GRUG 2.0 1 look back 2010-2013 presentations 20170801
GRUG 2.0 1 look back 2010-2013 presentations 20170801Glasgow Revit User Group
油
This document summarizes two meetings of the Edinburgh Revit User Group. The first meeting introduced three presenters who spoke about Revit Structure, standards review utilities, and working on large projects using Revit Structure/MEP. The second meeting in April 2013 included presentations from Miller Construction on their BIM strategy and from BIM Technologies on the role of an independent BIM coordinator. Both meetings included time for questions and continued discussions afterward at a local pub.BIFM North Region Key Learning Event - BIM & Soft Landings
BIFM North Region Key Learning Event - BIM & Soft LandingsWhitbags
油
The document discusses a presentation titled "BIM & Soft Landings: Where are we and where do we need to be?". It was presented by Mark Whittaker from BIFM North. The presentation provided an overview of building information modeling (BIM) and the soft landings framework. It highlighted that getting the design right early in the process can reduce costs compared to fixing issues later. It also emphasized engaging facilities managers and end users throughout the design and construction phases. The presentation suggested more work is still needed to fully implement BIM and soft landings in the industry.How'd you like your BIM, Sir?
How'd you like your BIM, Sir?esk0r
油
The document discusses the importance of Building Information Modeling (BIM) as an essential tool in the construction industry, emphasizing that it is not just about having information, but ensuring it is correct, accessible, and clearly presented to facilitate communication among all stakeholders. With mandates for BIM adoption emerging in the UK and EU, it calls for the Gibraltar AEC industry to proactively engage in shaping its implementation. The author urges the industry to collaborate and address concerns about BIM to pave the way for effective information management.B叩o c叩o v畛 BIM nm 2016
B叩o c叩o v畛 BIM nm 2016Huytraining
油
The document discusses the convergence of building information modeling (BIM) and geospatial technologies. It notes that as BIM is used for infrastructure management over the entire asset lifecycle, geospatial data will become increasingly important. However, the geospatial and BIM industries have traditionally operated separately. Going forward, there are opportunities to take the best aspects of both approaches to improve asset performance management. The convergence of BIM, geospatial data, and other sources of "big data" will enable more comprehensive predictive analytics. This will influence how infrastructure is designed, built, and able to adapt over time in response to changing conditions. Open standards bodies are working to develop converged standards to help make sense of the large amounts of sensor data thatBIM in Project Management: Keynote Speech by Mr. Kevin POOLE
BIM in Project Management: Keynote Speech by Mr. Kevin POOLEThe Hong Kong Institute of Building Information Modelling (HKIBIM)
油
BIM from Designers Perspective - Rob Jackson
BIM from Designers Perspective - Rob JacksonSchool of the Built Environment - University of Salford
油
Ad
WG18379 Construction Event Invite E
- 1. BIM for Wales Preparing the Construction Sector for Building Information Modelling The Welsh Government Construction Sector and the Wales BIM Hub invite you to an event: BIM for Wales Preparing the Construction Sector for Building Information Modelling on Monday 29th April 2013, SWALEC Stadium, Cardiff. Building Information Modelling (BIM) is becoming increasingly specified by clients. It is therefore important that Welsh businesses are prepared for the adoption of BIM to maximise its benefits. The event will provide an opportunity for all involved with buildings to hear first hand from leading industry experts on the latest developments, and offer an insight into the process via a live case study of BIM in practice. There will also be the opportunity to take part in workshops focusing on a variety of topics including BIM for Clients, the BIM Supply Chain and others. Registration from 9:30am to start at 10:00am, ending at 4:30pm. WG18379 / G/MH/4734 / 0313 / 息 Crown copyright 2013 To register for a free place at this full day event please call 03000 6 03000 or visit business.wales.gov.uk