�ݺ�ߣ

Creating RF Predictable Environments for
In-Building Wireless Applications
Signals Defense, LLC
1 Easter Court, Suite E
Owings Mills, Maryland 21117
410.902.0356
www.signalsdefense.com

June, 2016 Copyright © 2016 CYA Marketing, LLC. All rights reserved. 2
A Technology White Paper
Creating RF Predictable Environments for In-Building Wireless Systems
Market Demand Scenario
The confluence of current market conditions is creating a huge demand for in-building wireless
(IBW) systems over the next five years. These market conditions include:
 53% CAGR in mobile data traffic in the 2015-2020 period1
,
 80% of mobile usage is indoors2
,
 U.S. IBW systems market opportunity estimated at US$19 billion through 2020 involving
nearly 128,000 commercial buildings in the 100,000-500,000 sf range3
.
The Problem
Building construction materials such as concrete, steel and composite materials act as barriers
to RF signals from outdoor macrocells from getting inside buildings in a uniform manner. How
often have you had to go to the nearest window to get a strong enough cellular signal to make
or take a call?
Wireless capacity and coverage issues can be solved with available in-building wireless systems
such as a distributed antenna system (DAS), small cells, and bi-directional amplifiers (BDAs) or
signal boosters. Such IBW systems are intended to provide uniform cellular coverage and
capacity in high-traffic areas throughout the building.
The problem is that nearly every commercial building is ‘touched’ by a macrocell. The result is
that the outdoor signal does not penetrate the entire building but rather causes interference
with the indoor signal, thereby reducing the IBW system effectiveness and resulting in poor
signal reception.
When faced with this situation, RF engineers resort to high-power indoor amplifiers to mitigate
or otherwise combat the effects of the outside interfering signals so that mobile devices will
‘see’ a stronger indoor signal connect to the IBW equipment rather than connecting to the
nearby macrocell.
This approach, however, generally results in extensive engineering costs, more expensive IBW
equipment, and higher installation and testing costs.
1
Cisco Visual Networking Index (VNI), 2016
2
AT&T Mobility, 2014
3
Skyline Marketing Group, LinkedIN Post, June 2015

The Solution
What if the indoor environment could be made ‘RF predictable’ by insulating it from any
interfering RF signals from outside?
With a ‘clean’ and predictable RF environment, designing IBW systems becomes less
complicated and use of lower power amplifiers may be feasible.
DAS Shield™ from Signals Defense is a purpose-built RF attenuation material that is applied to
windows, either as a film or as a complete replacement window.
DAS Shield is designed to attenuate any outside signals by more than 30 dB over the 100 MHz
to 12 GHz frequency range. This wide range encompasses public safety, TV white space,
cellular and Wi-Fi applications.
Application Modeling
The proof of concept was tested with the support of an established IBW systems integrator,
Cell Signal Solutions (CSS), that operates in the New York-New Jersey market, and who is an
iBwave licensee.
CSS was asked to model the DAS Shield in an IBW system design to determine expected RF
performance in both ‘before’ and ‘after’ scenarios using iBwave Design.
Model 1
 A new 35-story building with approximately 300,000 square feet of floor space, located in
the New York-New Jersey market.
 Entire building exterior is glass panels.
 The IBW system is a commercially-available DAS.
 IBW system design called for three DAS remote units with 20 dBm output to feed the
antennas throughout the building.
 The interfering outside LTE signal varies with floor height. For example, it was measured to
be -75 dB at 20th
floor.
 The goal is to have Maximum Achievable Data Rate (MADR) to be at least 50 Mbps over at
least 90% of the floor plan.
 The ‘Before’ MADR map is shown Exhibit 1. It is evident that the signals emanating from the
antennas only deliver the desired throughput over a portion of the floor plan before being
diminished by outside interfering signals along the perimeter of the building.
 Clearly, the goal is not achieved, since only 52 percent of the target area has MADR equal
to or greater than 50 Mbps.

Exhibit 1
Applied Solution
 DAS Shield is applied to all sides of the building in iBwave Design.
 Exhibit 2 shows that, after applying the DAS Shield, outside interference is significantly
reduced or eliminated so that 99 percent of the target area has MADR of greater than 50
Mbps now.
 So the throughput target is met.

Exhibit 2
Additional Considerations
 Two conference rooms are located in the middle of the floor.
 Both of these are used regularly by executive level managers, and as such, require an extra
level of security for wireless transmissions, either over cellular or Wi-Fi frequencies.
 So both conference rooms additionally must be shielded, or isolated, from RF signals being
transmitted around the floor plan.
 With the 20 dBm remote units, DAS Shield is applied in iBwave Design to all sides of each
conference room to attenuate the RF signals covering the floor plan.
 The ‘After’ MADR map is shown in Exhibit 3.

Exhibit 3
Model 2
 To solve the interference problem shown in Exhibit 1, DAS Shield is applied to all sides
of the building in iBwave Design but the output power at the DAS remotes was
maintained at 20 dBm.
 In this model, tests were conducted to determine results remote units that transmit
at lower power levels.
 Transmit power at each DAS remote is reduced from 20 dBm to 0 dBm.
 Results show that at 0 dBm, the interfering outside LTE signal was kept at -75 dB at
20th
floor.

 The ‘After’ MADR map is shown Exhibit 4.
 Even at 0 dBm, the Maximum Achievable Data Rate averaged out over the whole floor
plan increased from 69 Mb/s (Exhibit 1) to 116 Mb/s (Exhibit 4).
 Target coverage (MADR > 50 Mb/s) increased from 52 percent (Exhibit 1) to 99%
(Exhibit 4), again meeting the objective.
 This outcome means that the 20 dBm DAS remote unit can be replaced by a much
lower power unit resulting in lower equipment costs and lower power consumption
while still achieving the desired performance.
Exhibit 4

How DAS Shield Benefits Building Owners and CIOs
The models demonstrate that with application of DAS Shield both mobile data throughput is
increased significantly, and DAS equipment and installation costs can be reduced.
Improved, predictable RF performance means that building owners can assure their tenants of
uniform, sustained wireless operation throughout the building, thereby adding to the
building’s appeal.
On existing buildings, DAS Shield is applied as a film on the inside face of all exterior windows.
For new buildings, DAS Shield can be installed as a complete window unit.
While DAS Shield material and installation costs must be added back to the total project cost,
building owners can realize additional benefits and substantial operating cost savings, as
follows:
 Security/Wireless Invisibility – “If one can’t see the network, one can’t attack the
network”. In addition to creating a quieter and more RF predictable environment on the
inside of the building, the ‘visibility’ of the indoor DAS and other wireless networks from
those on the outside will be significantly reduced by using DAS Shield.
Wi-Fi is a prime example. With DAS Shield, the Wi-Fi signal from inside a building is no
longer ‘visible’ outside the building. This reduction in the emanating RF footprint means
there is less access to the indoor Wi-Fi networks by anyone intending on making rogue or
unauthorized connections, or wirelessly penetrating the network.
DAS Shield can also be applied to interior walls to create secure conference rooms or
workspaces for wireless local area networks (WLANs). This capability is a significant
benefit to IT managers responsible for ensuring the integrity and protection of their
proprietary indoor wireless data networks.
 RF Shielding - DAS Shield works in both directions. That is, it provides shielding both from
the interior and exterior of the building’s windows. Thus the occupants and equipment
on the inside of the building will have additional sheltering from the active and ambient
RF energy and transmissions on the outside of the building.
Aside from macro-cellular communications, there are many other (possibly unwanted) RF
communications and transmissions in urban environments that may interfere with the
people and equipment inside the building.
 LEED Certification DAS Shield can help building owners qualify for LEED credits towards
achieving LEED certification.
LEED, or Leadership in Energy and Environmental Design, is a ‘green building’ certification
program that recognizes best-in-class building strategies and practices. To receive LEED
certification, building projects satisfy prerequisites and earn points to achieve different
levels of certification. For more information on the LEED program visit,
www.usgbc.org/certification

 Energy Savings - With DAS Shield window treatment, infrared (IR) is less than 17%,
ultraviolet (UV) light is less than 1% and the visual light transmission (VLT) is about 70%
clear and non-reflective while the total solar energy rejected (TSER) is greater than 50%.
This means that visibility through the windows is relatively unchanged while IR, UV and
solar energy coming into the building is significantly rejected. With IR, UV, and solar
energy reduced substantially, building owners will see much less glare inside the building
and experience less fading of organic materials (floors, furniture, artwork).
Even though each building is different in construction and location, and must be assessed
on its own merits, preliminary estimates suggest that DAS Shield may help lower overall
building heating and cooling costs by an average of 5-10% per year.
Energy simulation software can show how installing DAS Shield yields monthly utility cost
savings, based on current consumption. Depending on the utility company and
jurisdiction, building owners may qualify for partial energy cost reimbursements for the
upgrade.
Conclusions
DAS Shield is a breakthrough in IBW system design.
More important, it can set a new paradigm for IBW systems in achievable RF performance and
deployment costs.
The system design can be simplified, overall system equipment costs can be lower and
installation and testing time can be reduced.
The DAS Shield parameters already are built into iBwave Design-Materials so the learning
curve for designers to incorporate DAS Shield into their designs is minimal.
DAS Shield can help building owners to lower their overall operating costs while delivering a
superior, secure in-building wireless experience to their tenants and occupants.

About Us
iBwave is the power behind great in-building wireless experience,
enabling billions of end users and devices to connect inside a wide
range of venues. As the global industry reference, iBwave software
solutions allow for smarter planning, design and deployment of any
project regardless of size, complexity or technology. Along with
innovative software, iBwave is recognized for world-class support in
90 countries, industry’s most comprehensive components database
and a well-established certification program. www.ibwave.com
Cell Signal Solutions (CSS) offers in-building wireless solutions that
are planned by the industry’s most innovative and skilled engineers
and architects, installed by accomplished technicians, and
maintained by diligent operators. The CSS team consists of extensive
wireless technology and industry experience that works to deliver
turnkey solutions and best-in-class services to wireless carriers and
enterprise clients. www.cellsignalsolutions.com
Signals Defense (SD) produces an innovative, optically-clear window
film technology that provides high radio frequency (RF) and infrared
(IR) attenuation for RF shielding and thermal imaging defense
purposes. SD’s patented window technology has been engineered to
meet stringent US Intelligence community security requirements for
facilities handling classified information. SD’s technology is the de
facto written standard for the US Government and for organizations
desiring to properly secure locations handling sensitive and/or
classified information. SD’s window films meet the TEMPEST
requirement for the Intelligence Community Directive ICD 705 and
the DoD IR and RF Emanation Protection Standards. SD technology
has been deployed on over 1,300 locations providing our clients
(including Government Intelligence agencies, DOD, and Fortune 100
companies) with US DoD strength physical, IT and emission security
systems. SD technology also provides safety and energy benefits to
its clients with UV and glass fragmentation/spall control window
films, and SD glass and polycarbonates. www.signalsdefense.com
CYA Marketing is a strategic marketing and sales consulting firm that
specializes in helping technology firms grow their business through
‘customer-attuned’ strategies and tactics designed to raise brand
awareness and generate leads. www.cyamarketing.com

�ݺ�ߣ

White Paper_RF Shielding in IBW applications_v0616

More Related Content

White Paper_RF Shielding in IBW applications_v0616