Angles class 5
Download as PPTX, PDF6 likes4,209 views
This document provides an overview of geometry concepts to be covered in a 5th grade mathematics class. It will discuss basic geometry symbols, how angles are formed, types of angles including acute, obtuse, right, straight and complementary/supplementary angles. It will also cover using a protractor to measure and draw angles.
1 of 25
Downloaded 35 times
Recommended
4th grade geometry revised
4th grade geometry revisedMichelle New
Ìý
This document provides an overview of the key topics and concepts covered in a 4th grade geometry unit, including learning to name, classify, and create different shapes (triangles, squares, circles etc.), polygons, and 3D objects; it also suggests various activities and online resources to reinforce these geometric concepts.Introduction 3D shapes
Introduction 3D shapesInne Milanisti Sihasale
Ìý
Introduction of 3D shapes/Solid Shapes for primary 6 Students
Hope it will be help the students to learn about the 3D shapes Geometry Power Point 5th grade
Geometry Power Point 5th gradegponterio
Ìý
Geometry is the branch of mathematics that measures and compares points, lines, angles, surfaces, and solids. It defines basic shapes such as points, lines, rays, angles, and planes. It also covers types of angles and intersections between lines. Additionally, it categorizes polygons by number of sides and characteristics. Key concepts include perimeter, area, symmetry, and three-dimensional solids. The document provides definitions and examples of basic geometric elements, shapes, their properties, and how to measure them.Shapes and angle
Shapes and angleShankartwoa
Ìý
The document defines basic geometric shapes like points, lines, line segments, rays and angles. It explains that a point has no width, length or depth, a line extends in both directions with no endpoints, and a line segment has two endpoints. An angle is formed by two rays meeting at a common endpoint. Angles are measured and can be acute, right, obtuse, straight or reflex depending on their degree measurement. The document also defines polygons as closed shapes formed by three or more line segments, and can be regular or irregular. It provides instructions on how to measure and construct an angle.Geometry presentation
Geometry presentationBilly
Ìý
Geometry is the branch of mathematics concerned with properties of points, lines, angles, curves, surfaces and solids. It involves visualizing shapes, sizes, patterns and positions. The presentation introduced basic concepts like different types of lines, rays and angles. It also discussed plane figures from kindergarten to 8th grade, including classifying shapes by number of sides. Space figures like cubes and pyramids were demonstrated by having students construct 3D models. The concepts of tessellation, symmetry, and line of symmetry were explained.Nets of 3D Shapes
Nets of 3D ShapesNadineThomas4
Ìý
A net is an unfolded 3D shape laid out flat that makes it easy to see how many faces the shape has. The document shows different nets including cubes with 11 possible nets, cuboids with 54 possible nets, cylinders formed from two different nets, cones, square-based pyramids, triangular-based pyramids made of four triangles, and prisms which are made up of two base shapes along with rectangles, where the number of rectangles equals the number of sides of the base shape. An example net of a pentagonal prism is provided which has two pentagons and five rectangles.Perimeter
PerimeterBeberly Fabayos
Ìý
The document defines perimeter as the distance around a polygon and explains that to find the perimeter of a polygon you add up the lengths of all the sides. It provides examples of calculating the perimeter of various shapes including triangles, squares, rectangles, pentagons, and hexagons. Formulas and step-by-step workings are shown for finding the perimeter when given the measurements of the sides.Basic geometrical ideas class vi
Basic geometrical ideas class viadabra66
Ìý
Geometry is the branch of mathematics that deals with figures like points, lines, angles, surfaces, and solids. It studies their properties and relationships. A point has no size, a line extends indefinitely, a ray has one endpoint and extends from it, a plane is a flat surface that goes on forever, an angle is formed by two rays from the same point, a triangle has three sides and three angles, a quadrilateral is a four-sided figure, and a circle is all points the same distance from the center. The document teaches the basic geometric concepts to students.Symmetry In Math
Symmetry In Mathcaniglia
Ìý
There are several basic types of symmetry including line symmetry, rotational symmetry, translational symmetry, reflective symmetry, and glide reflective symmetry. Symmetry can be seen in art, nature, mathematics and other areas. The document discusses these types of symmetries and provides examples like kaleidoscopes, wheels, and shapes to illustrate symmetrical concepts. Exercises are suggested to help understand symmetry further such as folding paper or moving shapes on a plane.Decimals 
Decimals Doreen Shottek
Ìý
This document provides an introduction to decimals for students. It begins with an overview of decimals and then discusses how to write, read, and compare decimal values. Examples are provided such as writing amounts of money in decimal form. The document explains place value of decimals and how to use symbols like tenths, hundredths and thousandths. Students are given opportunities to practice writing, reading and comparing decimal values through interactive exercises.6th grade math algebra
6th grade math algebragwl10925
Ìý
This document provides sample math problems and explanations for solving 6th grade algebra equations, proportions, and translating word problems into algebraic equations. It includes 3 examples of math word problems along with step-by-step explanations for how to set up and solve each problem. The document promotes additional learning resources in the form of math books that contain similar practice problems and explanations to prepare for state tests.Lines of symmetry
Lines of symmetryRosa Fernández
Ìý
This document discusses the concept of symmetry and lines of symmetry. It provides examples of cutting different shapes, like rectangles and triangles, into two equal parts that are mirror images of each other along a line. Students are assigned homework to find the lines of symmetry for various shapes.3D Shapes - Properties of 3D Shapes
3D Shapes - Properties of 3D Shapeskaren abraham
Ìý
This document introduces 3D shapes by defining their key components of faces, edges, and corners/vertices. It explains that faces are flat or curved surfaces, edges are where two faces meet, and corners are where edges meet. Common 3D shapes are then described based on their number of faces, edges, and vertices, such as cylinders having two circular faces and one curved face, pyramids having three faces with two circles as the base, and cubes having six faces, twelve edges, and eight vertices. The document encourages reviewing properties of 3D shapes and staying safe.Properties of 3 d shapes
Properties of 3 d shapesjennifernichols8
Ìý
The document defines and provides information about various 3D shapes. It discusses cubes, cuboids, triangular prisms, regular tetrahedrons, spheres, cylinders, cones, square-based pyramids and their key features such as the number of faces, vertices and edges. It also provides information about prisms and nets of 3D shapes.Geometric Shapes
Geometric ShapesPrashant Mahajan
Ìý
Learn about various 2D and 3D geometric shapes such as circle, polygons, pyramids, prisms, polyhedrons, cone, cylinder, sphere, etc.Rotational Symmetry
Rotational SymmetryJC Sawyer Dolphins
Ìý
The document discusses rotational symmetry, which is when a shape looks the same after being rotated. It provides examples of shapes with different orders of rotational symmetry, such as a square having order 4 symmetry. Road signs and letters of the alphabet are used to demonstrate rotational symmetry. Pentominoes and 7-pin polygons are introduced and examples are given of shapes with different rotational symmetry orders to sort.TYPES OF ANGLES
TYPES OF ANGLESShanthiSangari1
Ìý
The document defines and provides examples of the six main types of angles: acute angles which are less than 90 degrees; right angles of 90 degrees; obtuse angles between 90 and 180 degrees; straight angles of 180 degrees; reflex angles between 180 and 360 degrees; and complete angles of 360 degrees. Examples are given for each type of angle to illustrate their defining characteristics and measures.Factors and multiples
Factors and multiplesAdam Mlynarczyk
Ìý
The document provides an overview of factors and multiples in mathematics. It defines factors as numbers that divide evenly into another number, and multiples as numbers that another number divides evenly into. It discusses finding common factors and common multiples between two numbers, as well as decomposing numbers into their prime factors. The document also covers calculating the highest common factor and lowest common multiple of two numbers using prime factor decomposition. Finally, it provides some practice problems for readers to work through.types of triangles
types of trianglesAbhishek Kumar
Ìý
There are six types of triangles defined by their angles and sides: right triangles have one 90 degree angle; acute triangles have three angles less than 90 degrees; obtuse triangles have one angle greater than 90 degrees; equilateral triangles have three equal sides and angles; isosceles triangles have two equal sides and angles; and scalene triangles have no equal sides or angles.3d shapes
3d shapesSuet Yen
Ìý
This document describes 5 different 3D shapes: a sphere, cone, cube, cylinder, and cuboid. Each shape is presented as a riddle by listing its distinguishing geometric properties, and the reader is prompted to identify the shape. The document reinforces learning the key attributes that define common 3D objects.Classifying Triangles
Classifying TrianglesAmanda Casto
Ìý
The document defines and provides examples of different types of triangles based on their interior angles and side lengths. It explains that triangles can be classified as right, obtuse, or acute based on their interior angles, and as equilateral, isosceles, or scalene based on their side lengths. Examples are given of right scalene triangles, obtuse isosceles triangles, and acute scalene triangles to demonstrate how triangles can be classified based on both their angles and side lengths.Lines and angles presentation
Lines and angles presentationAnnmarie1020
Ìý
This document defines and describes different types of lines and angles. It explains that lines can be rays, segments, parallel, or perpendicular and defines each type. Lines extend in opposite directions and are made up of points. The document also defines right, obtuse, and acute angles and explains their degree measurements. It includes questions to check the reader's understanding of lines and angles.Lines and angles
Lines and anglesSoumya Sankar Modak
Ìý
For those who need help in PPT's for Lines and Angles and want to get good results.
Visit my website :- http://www.soumyamodakbed.blogspot.in/ for more information.Line symmetry
Line symmetryNancy Walkup
Ìý
Line symmetry is the most common type of symmetry where an object can be folded along a central line so that one half is an exact mirror image of the other. Examples of objects that exhibit line symmetry include many creatures, plants, human faces, bodies, letters of the alphabet, and artworks which can be folded along a central line to form two congruent mirror images. Line symmetry is found throughout nature and in human-made objects.Geometrical figures
Geometrical figuresCorina Hernandez
Ìý
This document discusses different geometrical shapes and their characteristics. It begins with an activity where students find and identify circles, triangles, squares, and rectangles around the room. It then defines each shape, such as a circle as a set of points equidistant from the center, and a rectangle as a shape with two short sides and two long sides forming four right angles. It further explains different types of triangles, such as equilateral triangles with three equal sides and three equal angles. In the end, it prompts students to discuss possible combinations of triangle characteristics.Compare fractions - Grade 4
Compare fractions - Grade 4Enaam Alotaibi
Ìý
This ppt conclude all lessons of compare fractions By using four methods: Benchmarks, Area Models. Number Line, and ButterflyUnderstanding quadrilaterals
Understanding quadrilateralsyashwant kondeti
Ìý
A quadrilateral is a 4-sided polygon. There are 5 main types of quadrilaterals: square, rectangle, rhombus, trapezoid, and parallelogram. Each type has distinct properties like the lengths of sides, lengths of angles, lengths of diagonals. A quadrilateral is named based on the order of its vertices.Polygons presentation
Polygons presentationJessica
Ìý
This document defines and provides examples of different types of polygons. It explains that a polygon is a closed figure made of line segments that intersect exactly two others. It then defines regular and irregular polygons, as well as different types of triangles, quadrilaterals, pentagons, hexagons, and other polygons. Key details like the number of sides and sum of interior angles are provided. Examples of both regular and irregular shapes are shown.basics of geometry with practical images
basics of geometry with practical imagesavdheshtripathi2
Ìý
This document defines and describes basic geometry terms including:
- Geometry is the branch of mathematics concerned with shapes, their properties, and spatial relationships.
- It defines types of lines, angles, and their properties. Common line types include rays, segments, and parallel/perpendicular lines. Common angle types include acute, obtuse, right, and straight angles.
- Plane figures are two-dimensional shapes defined by points and lines on a flat surface. Common plane figures include polygons, circles, and quadrilaterals.
- Space figures are three-dimensional shapes with faces, edges, and vertices. Examples given are tessellations and symmetry in planes and space.
More Related Content
What's hot (20)
Symmetry In Math
Symmetry In Mathcaniglia
Ìý
There are several basic types of symmetry including line symmetry, rotational symmetry, translational symmetry, reflective symmetry, and glide reflective symmetry. Symmetry can be seen in art, nature, mathematics and other areas. The document discusses these types of symmetries and provides examples like kaleidoscopes, wheels, and shapes to illustrate symmetrical concepts. Exercises are suggested to help understand symmetry further such as folding paper or moving shapes on a plane.Decimals
Decimals Doreen Shottek
Ìý
This document provides an introduction to decimals for students. It begins with an overview of decimals and then discusses how to write, read, and compare decimal values. Examples are provided such as writing amounts of money in decimal form. The document explains place value of decimals and how to use symbols like tenths, hundredths and thousandths. Students are given opportunities to practice writing, reading and comparing decimal values through interactive exercises.6th grade math algebra
6th grade math algebragwl10925
Ìý
This document provides sample math problems and explanations for solving 6th grade algebra equations, proportions, and translating word problems into algebraic equations. It includes 3 examples of math word problems along with step-by-step explanations for how to set up and solve each problem. The document promotes additional learning resources in the form of math books that contain similar practice problems and explanations to prepare for state tests.Lines of symmetry
Lines of symmetryRosa Fernández
Ìý
This document discusses the concept of symmetry and lines of symmetry. It provides examples of cutting different shapes, like rectangles and triangles, into two equal parts that are mirror images of each other along a line. Students are assigned homework to find the lines of symmetry for various shapes.3D Shapes - Properties of 3D Shapes
3D Shapes - Properties of 3D Shapeskaren abraham
Ìý
This document introduces 3D shapes by defining their key components of faces, edges, and corners/vertices. It explains that faces are flat or curved surfaces, edges are where two faces meet, and corners are where edges meet. Common 3D shapes are then described based on their number of faces, edges, and vertices, such as cylinders having two circular faces and one curved face, pyramids having three faces with two circles as the base, and cubes having six faces, twelve edges, and eight vertices. The document encourages reviewing properties of 3D shapes and staying safe.Properties of 3 d shapes
Properties of 3 d shapesjennifernichols8
Ìý
The document defines and provides information about various 3D shapes. It discusses cubes, cuboids, triangular prisms, regular tetrahedrons, spheres, cylinders, cones, square-based pyramids and their key features such as the number of faces, vertices and edges. It also provides information about prisms and nets of 3D shapes.Geometric Shapes
Geometric ShapesPrashant Mahajan
Ìý
Learn about various 2D and 3D geometric shapes such as circle, polygons, pyramids, prisms, polyhedrons, cone, cylinder, sphere, etc.Rotational Symmetry
Rotational SymmetryJC Sawyer Dolphins
Ìý
The document discusses rotational symmetry, which is when a shape looks the same after being rotated. It provides examples of shapes with different orders of rotational symmetry, such as a square having order 4 symmetry. Road signs and letters of the alphabet are used to demonstrate rotational symmetry. Pentominoes and 7-pin polygons are introduced and examples are given of shapes with different rotational symmetry orders to sort.TYPES OF ANGLES
TYPES OF ANGLESShanthiSangari1
Ìý
The document defines and provides examples of the six main types of angles: acute angles which are less than 90 degrees; right angles of 90 degrees; obtuse angles between 90 and 180 degrees; straight angles of 180 degrees; reflex angles between 180 and 360 degrees; and complete angles of 360 degrees. Examples are given for each type of angle to illustrate their defining characteristics and measures.Factors and multiples
Factors and multiplesAdam Mlynarczyk
Ìý
The document provides an overview of factors and multiples in mathematics. It defines factors as numbers that divide evenly into another number, and multiples as numbers that another number divides evenly into. It discusses finding common factors and common multiples between two numbers, as well as decomposing numbers into their prime factors. The document also covers calculating the highest common factor and lowest common multiple of two numbers using prime factor decomposition. Finally, it provides some practice problems for readers to work through.types of triangles
types of trianglesAbhishek Kumar
Ìý
There are six types of triangles defined by their angles and sides: right triangles have one 90 degree angle; acute triangles have three angles less than 90 degrees; obtuse triangles have one angle greater than 90 degrees; equilateral triangles have three equal sides and angles; isosceles triangles have two equal sides and angles; and scalene triangles have no equal sides or angles.3d shapes
3d shapesSuet Yen
Ìý
This document describes 5 different 3D shapes: a sphere, cone, cube, cylinder, and cuboid. Each shape is presented as a riddle by listing its distinguishing geometric properties, and the reader is prompted to identify the shape. The document reinforces learning the key attributes that define common 3D objects.Classifying Triangles
Classifying TrianglesAmanda Casto
Ìý
The document defines and provides examples of different types of triangles based on their interior angles and side lengths. It explains that triangles can be classified as right, obtuse, or acute based on their interior angles, and as equilateral, isosceles, or scalene based on their side lengths. Examples are given of right scalene triangles, obtuse isosceles triangles, and acute scalene triangles to demonstrate how triangles can be classified based on both their angles and side lengths.Lines and angles presentation
Lines and angles presentationAnnmarie1020
Ìý
This document defines and describes different types of lines and angles. It explains that lines can be rays, segments, parallel, or perpendicular and defines each type. Lines extend in opposite directions and are made up of points. The document also defines right, obtuse, and acute angles and explains their degree measurements. It includes questions to check the reader's understanding of lines and angles.Lines and angles
Lines and anglesSoumya Sankar Modak
Ìý
For those who need help in PPT's for Lines and Angles and want to get good results.
Visit my website :- http://www.soumyamodakbed.blogspot.in/ for more information.Line symmetry
Line symmetryNancy Walkup
Ìý
Line symmetry is the most common type of symmetry where an object can be folded along a central line so that one half is an exact mirror image of the other. Examples of objects that exhibit line symmetry include many creatures, plants, human faces, bodies, letters of the alphabet, and artworks which can be folded along a central line to form two congruent mirror images. Line symmetry is found throughout nature and in human-made objects.Geometrical figures
Geometrical figuresCorina Hernandez
Ìý
This document discusses different geometrical shapes and their characteristics. It begins with an activity where students find and identify circles, triangles, squares, and rectangles around the room. It then defines each shape, such as a circle as a set of points equidistant from the center, and a rectangle as a shape with two short sides and two long sides forming four right angles. It further explains different types of triangles, such as equilateral triangles with three equal sides and three equal angles. In the end, it prompts students to discuss possible combinations of triangle characteristics.Compare fractions - Grade 4
Compare fractions - Grade 4Enaam Alotaibi
Ìý
This ppt conclude all lessons of compare fractions By using four methods: Benchmarks, Area Models. Number Line, and ButterflyUnderstanding quadrilaterals
Understanding quadrilateralsyashwant kondeti
Ìý
A quadrilateral is a 4-sided polygon. There are 5 main types of quadrilaterals: square, rectangle, rhombus, trapezoid, and parallelogram. Each type has distinct properties like the lengths of sides, lengths of angles, lengths of diagonals. A quadrilateral is named based on the order of its vertices.Polygons presentation
Polygons presentationJessica
Ìý
This document defines and provides examples of different types of polygons. It explains that a polygon is a closed figure made of line segments that intersect exactly two others. It then defines regular and irregular polygons, as well as different types of triangles, quadrilaterals, pentagons, hexagons, and other polygons. Key details like the number of sides and sum of interior angles are provided. Examples of both regular and irregular shapes are shown.Similar to Angles class 5 (20)
basics of geometry with practical images
basics of geometry with practical imagesavdheshtripathi2
Ìý
This document defines and describes basic geometry terms including:
- Geometry is the branch of mathematics concerned with shapes, their properties, and spatial relationships.
- It defines types of lines, angles, and their properties. Common line types include rays, segments, and parallel/perpendicular lines. Common angle types include acute, obtuse, right, and straight angles.
- Plane figures are two-dimensional shapes defined by points and lines on a flat surface. Common plane figures include polygons, circles, and quadrilaterals.
- Space figures are three-dimensional shapes with faces, edges, and vertices. Examples given are tessellations and symmetry in planes and space.
Polygons.pptx GRADE 5 MATHEMATICS - 3RD QUARTER
Polygons.pptx GRADE 5 MATHEMATICS - 3RD QUARTERJanetteCano3
Ìý
This document discusses polygons and their properties. It defines a polygon as a closed 2D shape made of three or more straight line segments. Polygons are named based on the number of sides, such as triangles having 3 sides, quadrilaterals having 4 sides, and pentagons having 5 sides. Regular polygons have equal side lengths and equal interior angles, while irregular polygons do not have these properties. The document provides instructions for drawing regular polygons using a protractor and discusses congruent polygons as those with equal corresponding side lengths and angles.Geometry Guide
Geometry Guideguestac35d61
Ìý
This document provides definitions and descriptions of basic geometry terms including:
- Points, lines, rays, line segments, planes and their relationships
- Angles and types of angles such as acute, obtuse, right, straight
- Triangles and their properties such as sides, angles, and types
- Quadrilaterals such as parallelograms, rectangles, rhombuses, trapezoids
- Circles and their parts including chords, diameters, arcs, radii, sectors
- Polygons with 5+ sides such as pentagons and hexagons
Definitions
DefinitionsJanet Hanshaw
Ìý
Definitions are used to justify geometric statements and conclusions. Postulates or axioms are basic statements in geometry that are accepted without proof. Theorems are important mathematical statements that can be proven using definitions, postulates, or previously proven theorems. A point is a zero-dimensional figure that can be represented as a dot, node, location, or ordered pair of numbers. A line is a one-dimensional object that extends indefinitely in both directions and is made up of points, while a plane is a two-dimensional set of points that extends indefinitely in all directions and is composed of lines.Geometry Guide
Geometry Guideguestc5065b
Ìý
This document provides definitions and descriptions of basic geometric shapes and their components. It explains lines, rays, segments and their intersections. It also defines angles, triangles according to their sides and angles, quadrilaterals, circles and their parts like radii, diameters, chords, arcs, sectors. It gives formulas for calculating perimeters and areas of rectangles, squares, parallelograms, trapezoids and circles. Finally, it briefly introduces other polygons like hexagons, octagons and regular polygons.
Plane figures
Plane figuresyase_matheresa
Ìý
The document defines and describes various plane figures (two-dimensional shapes). It begins by defining what a plane figure is and then describes the key properties of circles, triangles, rectangles, rhombuses, squares, and trapezoids. For each shape, it provides the defining characteristics, such as a circle tracing a curve that is always the same distance from the center and a triangle being formed by 3 straight lines. It also classifies triangles based on their angles and sides. The document aims to teach the reader to define, identify, and draw the principal geometric plane figures.Jayme's Geometry Guide
Jayme's Geometry Guideguestdb2b8a5
Ìý
The document outlines different geometric shapes and their properties, including lines, angles, triangles, quadrilaterals, circles, and other polygons. It defines key concepts such as points, lines, rays, perpendicular and parallel lines, acute, obtuse, and right angles. Formulas are provided for calculating the area of rectangles, squares, parallelograms, trapezoids, and circles.
Lines and angles
Lines and anglesKulbir Ghagga
Ìý
This document defines and provides examples of various types of lines and angles in geometry. It begins with defining basic terms like points, lines, line segments, rays, intersecting and non-intersecting lines. It then defines different types of angles like acute, right, obtuse, straight, reflex, adjacent and vertically opposite angles. Finally, it discusses parallel lines and the angles formed when lines are cut by a transversal, including corresponding angles, alternate interior angles, and interior angles on the same side of the transversal.Geometry Guide
Geometry Guideguest096ccdc
Ìý
This document provides definitions and descriptions of basic geometry terms including:
- Points, lines, line segments, rays, intersecting lines, perpendicular and parallel lines
- Angles and angle types such as acute, obtuse, right, straight, complementary, supplementary
- Triangles defined by angles and sides including right, obtuse, acute, scalene, isosceles, equilateral
- Quadrilaterals including trapezoids, parallelograms, rectangles, rhombuses, and squares
- Circles and circle terms such as chords, diameters, arcs, radii, sectors, circumference, and areaMath
Mathstuntguy2001
Ìý
This document provides an overview of elementary shapes in math. It begins by explaining that all shapes are formed using lines and curves and can be organized into categories like lines, angles, and polygons. It then discusses how to measure and compare line segments using observations, tracing, and a ruler. Different types of angles are defined. Two-dimensional shapes like polygons, quadrilaterals, circles and triangles are described. Three-dimensional shapes such as cubes, cuboids, spheres and hemispheres are also defined along with their key features like faces, edges and vertices.Haley's Planar Geometry
Haley's Planar Geometryguest876985a
Ìý
This document provides definitions and key information about common geometric shapes including:
- Lines, line segments, rays, and their relationships such as intersecting, perpendicular, and parallel lines.
- Points, and the labeling of points.
- Common triangle types such as right, obtuse, acute, scalene, isosceles, and equilateral triangles and their defining characteristics.
- Properties of quadrilaterals including trapezoids, parallelograms, rectangles, rhombi, and squares.
- Circle elements such as chords, diameters, arcs, sectors, radii, circumference, and calculating area.
- Other polygons like hexagons and octagons.Geometry review
Geometry reviewmrsacrobinson80
Ìý
Review of Geometry terms for test. Include pictures taken around the schools used to show real-life examples. Pre geometry
Pre geometrymstf mstf
Ìý
This document provides an overview of basic geometry concepts including:
- Points, lines, planes, and space as the building blocks of geometry.
- Definitions of key terms like points, lines, rays, segments, planes, angles, and different types of angles.
- How to measure angles using a protractor and the units of degrees.
- Relationships between geometric figures like parallel and intersecting lines, coplanar points and lines, and different types of angles.
Isometric drawings
Isometric drawingsdean dundas
Ìý
This document provides information on isometric projections and isometric drawing techniques. It discusses how isometric projections allow three faces of an object to be viewed at once by pivoting the object 45 degrees. It also describes how isometric drawings are created using a "box construction" method where measurement lines are drawn at 30 degree angles to form an outline box for the object. The stages of isometric drawing are outlined as sketching the box, measuring details, and final layout. Methods for drawing non-isometric lines, circles, and rounded objects in isometric perspective are also summarized.Recently uploaded (20)
Blind spots in AI and Formulation Science, IFPAC 2025.pdf
Blind spots in AI and Formulation Science, IFPAC 2025.pdfAjaz Hussain
Ìý
The intersection of AI and pharmaceutical formulation science highlights significant blind spots—systemic gaps in pharmaceutical development, regulatory oversight, quality assurance, and the ethical use of AI—that could jeopardize patient safety and undermine public trust. To move forward effectively, we must address these normalized blind spots, which may arise from outdated assumptions, errors, gaps in previous knowledge, and biases in language or regulatory inertia. This is essential to ensure that AI and formulation science are developed as tools for patient-centered and ethical healthcare.Kaun TALHA quiz Prelims - El Dorado 2025
Kaun TALHA quiz Prelims - El Dorado 2025Conquiztadors- the Quiz Society of Sri Venkateswara College
Ìý
Prelims of Kaun TALHA : a Travel, Architecture, Lifestyle, Heritage and Activism quiz, organized by Conquiztadors, the Quiz society of Sri Venkateswara College under their annual quizzing fest El Dorado 2025. 
Lesson Plan M1 2024 Lesson Plan M1 2024 Lesson Plan M1 2024 Lesson Plan M1...
Lesson Plan M1 2024 Lesson Plan M1 2024 Lesson Plan M1 2024 Lesson Plan M1...pinkdvil200
Ìý
Lesson Plan M1 2024 Lesson Plan M1 2024 Lesson Plan M1 2024 Year 10 The Senior Phase Session 3 Term 1.pptx
Year 10 The Senior Phase Session 3 Term 1.pptxmansk2
Ìý
Year 10 The Senior Phase Session 3 Term 1.pptxAPM People Interest Network Conference - Tim Lyons - The neurological levels ...
APM People Interest Network Conference - Tim Lyons - The neurological levels ...Association for Project Management
Ìý
APM People Interest Network Conference 2025
-Autonomy, Teams and Tension: Projects under stress
-Tim Lyons
-The neurological levels of
team-working: Harmony and tensions
With a background in projects spanning more than 40 years, Tim Lyons specialised in the delivery of large, complex, multi-disciplinary programmes for clients including Crossrail, Network Rail, ExxonMobil, Siemens and in patent development. His first career was in broadcasting, where he designed and built commercial radio station studios in Manchester, Cardiff and Bristol, also working as a presenter and programme producer. Tim now writes and presents extensively on matters relating to the human and neurological aspects of projects, including communication, ethics and coaching. He holds a Master’s degree in NLP, is an NLP Master Practitioner and International Coach. He is the Deputy Lead for APM’s People Interest Network.
Session | The Neurological Levels of Team-working: Harmony and Tensions
Understanding how teams really work at conscious and unconscious levels is critical to a harmonious workplace. This session uncovers what those levels are, how to use them to detect and avoid tensions and how to smooth the management of change by checking you have considered all of them.
Adventure Activities Final By H R Gohil Sir
Adventure Activities Final By H R Gohil SirGUJARATCOMMERCECOLLE
Ìý
Adventure Activities Final By H R Gohil SirHow to Modify Existing Web Pages in Odoo 18
How to Modify Existing Web Pages in Odoo 18Celine George
Ìý
In this slide, we’ll discuss on how to modify existing web pages in Odoo 18. Web pages in Odoo 18 can also gather user data through user-friendly forms, encourage interaction through engaging features. 
N.C. DPI's 2023 Language Diversity Briefing
N.C. DPI's 2023 Language Diversity BriefingMebane Rash
Ìý
The number of languages spoken in NC public schools.
Essentials of a Good PMO, presented by Aalok Sonawala
Essentials of a Good PMO, presented by Aalok SonawalaAssociation for Project Management
Ìý
APM event hosted by the South Wales and West of England Network (SWWE Network)
Speaker: Aalok Sonawala
The SWWE Regional Network were very pleased to welcome Aalok Sonawala, Head of PMO, National Programmes, Rider Levett Bucknall on 26 February, to BAWA for our first face to face event of 2025. Aalok is a member of APM’s Thames Valley Regional Network and also speaks to members of APM’s PMO Interest Network, which aims to facilitate collaboration and learning, offer unbiased advice and guidance.
Tonight, Aalok planned to discuss the importance of a PMO within project-based organisations, the different types of PMO and their key elements, PMO governance and centres of excellence.
PMO’s within an organisation can be centralised, hub and spoke with a central PMO with satellite PMOs globally, or embedded within projects. The appropriate structure will be determined by the specific business needs of the organisation. The PMO sits above PM delivery and the supply chain delivery teams.
For further information about the event please click here.Principle and Practices of Animal Breeding || Boby Basnet
Principle and Practices of Animal Breeding || Boby BasnetBoby Basnet
Ìý
Principle and Practices of Animal Breeding Full Note
|| Assistant Professor Boby Basnet ||IAAS || AFU || PU || FU
How to use Init Hooks in Odoo 18 - Odoo ºÝºÝߣs
How to use Init Hooks in Odoo 18 - Odoo ºÝºÝߣsCeline George
Ìý
In this slide, we’ll discuss on how to use Init Hooks in Odoo 18. In Odoo, Init Hooks are essential functions specified as strings in the __init__ file of a module.Research & Research Methods: Basic Concepts and Types.pptx
Research & Research Methods: Basic Concepts and Types.pptxDr. Sarita Anand
Ìý
This ppt has been made for the students pursuing PG in social science and humanities like M.Ed., M.A. (Education), Ph.D. Scholars. It will be also beneficial for the teachers and other faculty members interested in research and teaching research concepts.
Kaun TALHA quiz Prelims - El Dorado 2025
Kaun TALHA quiz Prelims - El Dorado 2025Conquiztadors- the Quiz Society of Sri Venkateswara College
Ìý
APM People Interest Network Conference - Tim Lyons - The neurological levels ...
APM People Interest Network Conference - Tim Lyons - The neurological levels ...Association for Project Management
Ìý
Angles class 5
- 2. WE WOULD LEARN ABOUT ï‚„Basic symbols in geometry ï‚„How are angles formed? ï‚„Types of angles ï‚„Measuring and drawing angles using protractor
- 3. The branch of mathematics that is concerned with the properties and relationships of: point, lines, angles, curves, surfaces, and solids - The visual study of shapes, sizes, patterns, and position
- 5. ï‚— Has no beginning or end. ï‚— Continues indefinitely in both directions. ï‚— Can be illustrated by drawing arrows at each end.
- 6. ï‚— Has a beginning point and an end point. ï‚— Line segments on a shape are called sides. ï‚— Can be found in many shapes.
- 7. ï‚— Has a beginning point, but no end point.
- 8. ï‚— Lines in the same plane that do not intersect or cross each other.
- 9. ï‚—Two or more lines that meet at a point. ï‚—Perpendicular lines form a right or 90 degree angle .
- 10. ï‚— Made up of two rays with the same start point. ï‚— The start point is called the vertex. ï‚— The two rays are called the sides of the angle/arms of angles. ANGLES
- 13. ï‚— Zero Angles ï‚— Right Angles ï‚— Acute Angles ï‚— Obtuse Angles ï‚— Straight Angles ï‚— Supplementary Angles ï‚— Complimentary Angles
- 14. ï‚— Are Parallel and equal 180 degrees.
- 15. ï‚— Two rays that create a 90 degree angle.
- 16. ï‚— Two rays that have a smaller angle than a right angle. ï‚— Degrees<90
- 17. Angles larger than a right angle and smaller than 180 ( two right angles)but greater than (>90) Degrees
- 18. ï‚— Angles equal to two right angles.
- 25. LET US REVISE HOW TO MEASURE AN ANGLE