Fred Hoyle: Life and Science A biography of the British cosmologist who coine...Simon Mitton
油
Fred Hoyle (1915-2001) was a pioneering British astrophysicist known for his contributions to stellar and cosmological theory. Some of his key accomplishments included developing theories of stellar nucleosynthesis and the origin of chemical elements within stars. He also proposed the steady state theory of the universe and opposed the Big Bang model, though the Big Bang is now widely accepted. Throughout his career, Hoyle engaged in significant scientific debates and controversies while also establishing the UK's Institute of Theoretical Astronomy.
This document discusses methods for calculating porosity and water saturation from different types of porosity. It presents equations for corrected porosity, effective porosity, and water saturation. These include the RW equation for water saturation, models like the Indonesian model, Waxman-Smits, and DW model. It notes presenting final results for water saturation calculated from different porosity types and thanking the reader.
1) An equation of state relates macroscopic variables like pressure, volume, temperature, and number of moles that describe a substance. The ideal gas law is the equation of state for gases.
2) Standard temperature and pressure (STP) are defined as 0属C (273.15 K) and 1 atmosphere (101.3 kPa). At STP, 1 mole of any gas occupies 22.4 L of volume.
3) Experiments on gas behavior led to Boyle's, Charles', and Gay-Lussac's laws, which combined form the ideal gas law: PV=nRT, relating pressure, volume, moles, and temperature.
This document discusses fluid kinematics and different types of fluid flow. It covers topics like Lagrangian and Eulerian methods of describing fluid motion, steady and unsteady flow, laminar and turbulent flow, rotational and irrotational flow, one-, two-, and three-dimensional flows. It also defines types of flow lines like path lines, streamlines, and streak lines. Additionally, it discusses the equation of continuity and its application in cylindrical polar coordinates for describing conservation of mass in fluid flow through a stream tube.
Dalton's law of partial pressure states that total pressure of the mixture of inert gases is equal to the sum of partial pressures of each gas present in the mixture.
Core analysis & wellsite core acquisition, handling and transportationDr. Arzu Javadova
油
This document provides an overview of coring and core analysis for reservoir characterization. It discusses the objectives of coring to obtain representative rock samples for analysis. Proper core handling and analysis can provide valuable data on lithology, porosity, permeability, and fluid saturations which help reduce uncertainty in reservoir models. The document outlines procedures for wellsite core handling, transportation, and preservation to minimize alteration. It also discusses conventional and wireline-retrievable coring systems.
The document describes a modified ASTM saturation method to determine fluid saturations in a core sample. It involves using a hydrocarbon solvent like toluene to extract water from the core into a graduated collection tube, allowing direct measurement of water saturation. Gas and oil saturations are then calculated indirectly. The procedure, equipment, sample calculation, advantages of getting an accurate water saturation measurement non-destructively, and disadvantage of it being a slow process are outlined.
This document discusses Stokes' law and terminal velocity. Stokes' law states that the drag force on a sphere falling through a fluid is directly proportional to the velocity, radius of the sphere, and viscosity of the fluid. Terminal velocity is reached when the true weight of a falling body is equal to the sum of the upward buoyant thrust and viscous drag, resulting in a constant maximum velocity. Terminal velocity varies directly with the square of the body's radius and inversely with the fluid's viscosity, and depends on the densities of the body and fluid.
The role of geomodeling in the multi disciplinary teamPetro Teach
油
The Geomodelling discipline is grounded on concepts to models workflow practices which embody technical themes that influence strategies for integrated subsurface teams and their economic decision making. The talk includes a brief discussion of geomodelling processes, general forecasting workflows and on improving the of geomodelling within teams. There are three core competencies underpinning the geomodelling discipline for proper execution. Developing sophistication leads to the ability to reframe subsurface practices, mitigate bottlenecks and improve subsurface cycle time.
This document provides an introduction to reservoir engineering concepts including porosity, saturation, surface and interfacial tension. It defines key terms like porosity, saturation, cohesive forces, and adhesive forces. Formulas for surface tension and interfacial tension are presented and derived for gas-water and oil-water systems. A numerical example is worked through to calculate the height of liquid held in a capillary tube given properties of the oil-water system. References and contact information are provided at the end.
Much is now made about Stress Shadows and their impact on hydraulic fracturing - particularly in multi-stage horizontal laterals commonly used in Unconventionals. Unfortunately, there is no standard definition of Stress Shadows and, as a result, there is much confusion over what they are and arent, and, most importantly, why they can have a significant impact on hydraulic fracturing operations. The goal of this presentation will be to address this confusion and more fully explain Stress Shadows and their impact. The creation of hydraulic fracture width during a stimulation generates a change in the stress field, which alters all three principal stresses as well as tip shear stresses. These stress changes are the Stress Shadows. As hydraulic fracture propagation is often controlled by the stress field, Stress Shadows may change the propagation path for subsequent hydraulic fractures or, as seen in cluster fracturing, propagation may be impeded completely. The presence of natural fractures and weakness planes can also affect, and be affected by, Stress Shadows. At the hydraulic fracture tip, shear stresses are generated that offer the potential to shear and open closed natural fractures and weak planes and if opened, it may be possible to stimulate them. Equally important, behind the hydraulic fracture tip Stress Shadows increase the magnitude of all three principal stresses, which tends to close weakness planes making them more difficult to stimulate. Because of these effects and others, understanding and designing for the impact of Stress Shadows is often critical for stimulation optimization.
1. The document discusses various concepts related to fluid mechanics including pressure, Pascal's law, units of pressure, measurement of pressure using manometers, and example problems. It provides definitions and equations for pressure, hydrostatic pressure, Pascal's law, and discusses different types of manometers and pressure gauges for measuring pressure. Example problems are included for calculating pressure under various conditions.
THE EFFECTS OF GEL STRENGHT ON THE OVERALLfelix aladetan
油
This document discusses gel strength, which is a measurement of the shear stress in drilling mud after it has been static for a period of time. It represents the mud's ability to suspend solids and cuttings when circulation is stopped. The document defines gel strength, describes how it is measured over 10 seconds, 10 minutes and 30 minutes, and identifies the factors that affect gel strength in water-based and oil-based muds. Both excessive and weak gel strengths can cause problems like stuck pipe or inadequate cutting suspension, so maintaining the proper gel strength is important for effective hole cleaning and drilling operations.
1. The document provides information about normal and oblique shock waves, including: Normal shock waves occur when flow is perpendicular to the shock and changes flow direction, while oblique shock waves occur at an angle and can change the flow direction.
2. Equations of motion are derived using conservation of mass, momentum, and energy across a control volume around the shock. These result in relations that allow calculation of flow properties downstream using upstream conditions and shock angle.
3. An example problem is provided to demonstrate the use of normal shock tables to calculate downstream conditions given an upstream Mach number and shock angle for an oblique shock wave. Flow properties like pressure, temperature, and turning angle are determined.
it gives you an indetail information about gas formation volume factor formula, derivation, constant information, and a numerical problem for better understanding
This document defines fluids and their properties. It discusses the differences between solids and fluids, and defines the various states of matter. Fluids are classified as ideal fluids, real fluids, Newtonian fluids, and non-Newtonian fluids. The key properties of fluids discussed include density, specific weight, viscosity, vapor pressure, and surface tension. Concepts such as bulk modulus, compressibility, and capillarity are also introduced. Various fluid flow measurement devices that utilize Bernoulli's equation are briefly mentioned.
The objective of this project was to identify various methods for well test in horizontal wells. Well test analysis in horizontal wells is applied to find the reservoir parameters like permeability and skin factor and the result from the chosen methods will be compared to the result of some famous software like Kappa Saphir, PanSystem, etc which are used in oil and gas industries.
This chapter introduces concepts related to fluid mechanics including definitions, properties, and units. It defines a fluid as a substance that flows under shear stress and can be a liquid or gas. Properties like density, specific weight, viscosity, and specific gravity are discussed. Density is defined as mass per unit volume and varies between different fluids. Viscosity describes a fluid's resistance to flow and can vary significantly between fluids. Finally, it distinguishes between Newtonian and non-Newtonian fluids based on whether viscosity depends on shear rate.
various types of flow meter
1. rotameter
2. venturimeter
3. electromagnetic flow meter
4. positive displacement flow meter
with their working advantage and disadvantages
The document discusses real and ideal gases. It introduces the universal gas equation of PV=nRT, which relates pressure, volume, temperature, and amount of gas. It explains that real gases are affected by intermolecular forces at low temperatures, whereas ideal gases are not. Real gases deviate from ideal gas behavior more at low temperatures due to the influence of intermolecular forces.
The document discusses diffusion and its importance in materials science. Diffusion is the transport of atoms in solids and occurs through mechanisms like vacancy diffusion and interstitial diffusion. Diffusion allows for processes like heat treating materials to improve properties by enhancing or reducing diffusion rates. The rate of diffusion is determined by factors like temperature, with higher temperatures greatly increasing diffusion rates through an Arrhenius relationship. Understanding diffusion is key for controlling processes like case hardening, where the diffusion of carbon into the surface of steel improves its hardness.
1) The document discusses fluid kinematics, which deals with the motion of fluids without considering the forces that create motion. It covers topics like velocity fields, acceleration fields, control volumes, and flow visualization techniques.
2) There are two main descriptions of fluid motion - Lagrangian, which follows individual particles, and Eulerian, which observes the flow at fixed points in space. Most practical analysis uses the Eulerian description.
3) The Reynolds Transport Theorem allows equations written for a fluid system to be applied to a fixed control volume, which is useful for analyzing forces on objects in a flow. It relates the time rate of change of an extensive property within the control volume to surface fluxes and the property accumulation.
The document discusses Bernoulli's theorem and its applications. It begins by defining different types of fluid flow, including steady and unsteady, uniform and non-uniform, laminar and turbulent flow. It then explains the concepts of discharge, continuity equation, and the different types of energies and heads in fluids. Bernoulli's theorem states that the total energy remains constant in ideal fluid flow. The document outlines the assumptions and limitations of the theorem. It concludes by discussing applications of Bernoulli's theorem in venturi meters, orifice meters, and Pitot tubes.
Mohsen Nourbakhsh is a petroleum engineer with 3 years of experience in well testing operations and data acquisition in Iraq. He currently works as a field engineer supervising well testing teams and providing technical support to clients. He has a Master's degree in Petroleum Reservoir Engineering and relevant training and certifications. His skills include well testing, production facility operations, reservoir simulation software, and he is proficient in English and Persian. He has received several awards for his performance and safety.
Mohamed Nagy is a petroleum engineer with 6 years of experience in consultancy, training, and technical support. He specializes in asset management, optimization, flow assurance studies, and modeling for conventional and unconventional resources. He has successfully completed several projects in production optimization, reservoir management, and dynamic flow modeling. His experience includes integrated production optimization, reservoir monitoring and surveillance, flow assurance, pressure transient analysis, reservoir simulation, and training. He is currently a Senior Petroleum Engineer at Schlumberger providing technical support, training, and consulting in the Middle East.
- Atef Farouk Abdelaal has over 18 years of experience in the petroleum industry, including positions as Senior Petrophysicist and Project Leader at ADCO in Abu Dhabi.
- He has expertise in petrophysics, reservoir modeling, and managing studies of undeveloped oil reservoirs across the Middle East and North Africa.
- Currently he is the Acting Study Manager at ADCO, where he leads teams and presents results to shareholders seeking approval for appraisal drilling.
This document provides a summary of a reservoir engineer's qualifications and experience. The reservoir engineer has over 9 years of experience working for two different oil companies, most recently as the Head of Reservoir Engineering at StarOil Petroleum Operating Company. Key experiences include reservoir simulation, forecasting, production analysis, and water management. The engineer has a Master's degree in Petroleum Engineering with a focus on produced water management. Language skills include fluency in English and Arabic.
This document provides a skills profile and work experience summary for an individual with over 20 years of experience in process engineering for oil, gas, petrochemical and nuclear power projects. The individual has extensive experience in conceptual design, front-end engineering, detailed engineering, commissioning, and plant optimization. They have strong leadership skills and have managed numerous projects from inception through completion.
This document discusses Stokes' law and terminal velocity. Stokes' law states that the drag force on a sphere falling through a fluid is directly proportional to the velocity, radius of the sphere, and viscosity of the fluid. Terminal velocity is reached when the true weight of a falling body is equal to the sum of the upward buoyant thrust and viscous drag, resulting in a constant maximum velocity. Terminal velocity varies directly with the square of the body's radius and inversely with the fluid's viscosity, and depends on the densities of the body and fluid.
The role of geomodeling in the multi disciplinary teamPetro Teach
油
The Geomodelling discipline is grounded on concepts to models workflow practices which embody technical themes that influence strategies for integrated subsurface teams and their economic decision making. The talk includes a brief discussion of geomodelling processes, general forecasting workflows and on improving the of geomodelling within teams. There are three core competencies underpinning the geomodelling discipline for proper execution. Developing sophistication leads to the ability to reframe subsurface practices, mitigate bottlenecks and improve subsurface cycle time.
This document provides an introduction to reservoir engineering concepts including porosity, saturation, surface and interfacial tension. It defines key terms like porosity, saturation, cohesive forces, and adhesive forces. Formulas for surface tension and interfacial tension are presented and derived for gas-water and oil-water systems. A numerical example is worked through to calculate the height of liquid held in a capillary tube given properties of the oil-water system. References and contact information are provided at the end.
Much is now made about Stress Shadows and their impact on hydraulic fracturing - particularly in multi-stage horizontal laterals commonly used in Unconventionals. Unfortunately, there is no standard definition of Stress Shadows and, as a result, there is much confusion over what they are and arent, and, most importantly, why they can have a significant impact on hydraulic fracturing operations. The goal of this presentation will be to address this confusion and more fully explain Stress Shadows and their impact. The creation of hydraulic fracture width during a stimulation generates a change in the stress field, which alters all three principal stresses as well as tip shear stresses. These stress changes are the Stress Shadows. As hydraulic fracture propagation is often controlled by the stress field, Stress Shadows may change the propagation path for subsequent hydraulic fractures or, as seen in cluster fracturing, propagation may be impeded completely. The presence of natural fractures and weakness planes can also affect, and be affected by, Stress Shadows. At the hydraulic fracture tip, shear stresses are generated that offer the potential to shear and open closed natural fractures and weak planes and if opened, it may be possible to stimulate them. Equally important, behind the hydraulic fracture tip Stress Shadows increase the magnitude of all three principal stresses, which tends to close weakness planes making them more difficult to stimulate. Because of these effects and others, understanding and designing for the impact of Stress Shadows is often critical for stimulation optimization.
1. The document discusses various concepts related to fluid mechanics including pressure, Pascal's law, units of pressure, measurement of pressure using manometers, and example problems. It provides definitions and equations for pressure, hydrostatic pressure, Pascal's law, and discusses different types of manometers and pressure gauges for measuring pressure. Example problems are included for calculating pressure under various conditions.
THE EFFECTS OF GEL STRENGHT ON THE OVERALLfelix aladetan
油
This document discusses gel strength, which is a measurement of the shear stress in drilling mud after it has been static for a period of time. It represents the mud's ability to suspend solids and cuttings when circulation is stopped. The document defines gel strength, describes how it is measured over 10 seconds, 10 minutes and 30 minutes, and identifies the factors that affect gel strength in water-based and oil-based muds. Both excessive and weak gel strengths can cause problems like stuck pipe or inadequate cutting suspension, so maintaining the proper gel strength is important for effective hole cleaning and drilling operations.
1. The document provides information about normal and oblique shock waves, including: Normal shock waves occur when flow is perpendicular to the shock and changes flow direction, while oblique shock waves occur at an angle and can change the flow direction.
2. Equations of motion are derived using conservation of mass, momentum, and energy across a control volume around the shock. These result in relations that allow calculation of flow properties downstream using upstream conditions and shock angle.
3. An example problem is provided to demonstrate the use of normal shock tables to calculate downstream conditions given an upstream Mach number and shock angle for an oblique shock wave. Flow properties like pressure, temperature, and turning angle are determined.
it gives you an indetail information about gas formation volume factor formula, derivation, constant information, and a numerical problem for better understanding
This document defines fluids and their properties. It discusses the differences between solids and fluids, and defines the various states of matter. Fluids are classified as ideal fluids, real fluids, Newtonian fluids, and non-Newtonian fluids. The key properties of fluids discussed include density, specific weight, viscosity, vapor pressure, and surface tension. Concepts such as bulk modulus, compressibility, and capillarity are also introduced. Various fluid flow measurement devices that utilize Bernoulli's equation are briefly mentioned.
The objective of this project was to identify various methods for well test in horizontal wells. Well test analysis in horizontal wells is applied to find the reservoir parameters like permeability and skin factor and the result from the chosen methods will be compared to the result of some famous software like Kappa Saphir, PanSystem, etc which are used in oil and gas industries.
This chapter introduces concepts related to fluid mechanics including definitions, properties, and units. It defines a fluid as a substance that flows under shear stress and can be a liquid or gas. Properties like density, specific weight, viscosity, and specific gravity are discussed. Density is defined as mass per unit volume and varies between different fluids. Viscosity describes a fluid's resistance to flow and can vary significantly between fluids. Finally, it distinguishes between Newtonian and non-Newtonian fluids based on whether viscosity depends on shear rate.
various types of flow meter
1. rotameter
2. venturimeter
3. electromagnetic flow meter
4. positive displacement flow meter
with their working advantage and disadvantages
The document discusses real and ideal gases. It introduces the universal gas equation of PV=nRT, which relates pressure, volume, temperature, and amount of gas. It explains that real gases are affected by intermolecular forces at low temperatures, whereas ideal gases are not. Real gases deviate from ideal gas behavior more at low temperatures due to the influence of intermolecular forces.
The document discusses diffusion and its importance in materials science. Diffusion is the transport of atoms in solids and occurs through mechanisms like vacancy diffusion and interstitial diffusion. Diffusion allows for processes like heat treating materials to improve properties by enhancing or reducing diffusion rates. The rate of diffusion is determined by factors like temperature, with higher temperatures greatly increasing diffusion rates through an Arrhenius relationship. Understanding diffusion is key for controlling processes like case hardening, where the diffusion of carbon into the surface of steel improves its hardness.
1) The document discusses fluid kinematics, which deals with the motion of fluids without considering the forces that create motion. It covers topics like velocity fields, acceleration fields, control volumes, and flow visualization techniques.
2) There are two main descriptions of fluid motion - Lagrangian, which follows individual particles, and Eulerian, which observes the flow at fixed points in space. Most practical analysis uses the Eulerian description.
3) The Reynolds Transport Theorem allows equations written for a fluid system to be applied to a fixed control volume, which is useful for analyzing forces on objects in a flow. It relates the time rate of change of an extensive property within the control volume to surface fluxes and the property accumulation.
The document discusses Bernoulli's theorem and its applications. It begins by defining different types of fluid flow, including steady and unsteady, uniform and non-uniform, laminar and turbulent flow. It then explains the concepts of discharge, continuity equation, and the different types of energies and heads in fluids. Bernoulli's theorem states that the total energy remains constant in ideal fluid flow. The document outlines the assumptions and limitations of the theorem. It concludes by discussing applications of Bernoulli's theorem in venturi meters, orifice meters, and Pitot tubes.
Mohsen Nourbakhsh is a petroleum engineer with 3 years of experience in well testing operations and data acquisition in Iraq. He currently works as a field engineer supervising well testing teams and providing technical support to clients. He has a Master's degree in Petroleum Reservoir Engineering and relevant training and certifications. His skills include well testing, production facility operations, reservoir simulation software, and he is proficient in English and Persian. He has received several awards for his performance and safety.
Mohamed Nagy is a petroleum engineer with 6 years of experience in consultancy, training, and technical support. He specializes in asset management, optimization, flow assurance studies, and modeling for conventional and unconventional resources. He has successfully completed several projects in production optimization, reservoir management, and dynamic flow modeling. His experience includes integrated production optimization, reservoir monitoring and surveillance, flow assurance, pressure transient analysis, reservoir simulation, and training. He is currently a Senior Petroleum Engineer at Schlumberger providing technical support, training, and consulting in the Middle East.
- Atef Farouk Abdelaal has over 18 years of experience in the petroleum industry, including positions as Senior Petrophysicist and Project Leader at ADCO in Abu Dhabi.
- He has expertise in petrophysics, reservoir modeling, and managing studies of undeveloped oil reservoirs across the Middle East and North Africa.
- Currently he is the Acting Study Manager at ADCO, where he leads teams and presents results to shareholders seeking approval for appraisal drilling.
This document provides a summary of a reservoir engineer's qualifications and experience. The reservoir engineer has over 9 years of experience working for two different oil companies, most recently as the Head of Reservoir Engineering at StarOil Petroleum Operating Company. Key experiences include reservoir simulation, forecasting, production analysis, and water management. The engineer has a Master's degree in Petroleum Engineering with a focus on produced water management. Language skills include fluency in English and Arabic.
This document provides a skills profile and work experience summary for an individual with over 20 years of experience in process engineering for oil, gas, petrochemical and nuclear power projects. The individual has extensive experience in conceptual design, front-end engineering, detailed engineering, commissioning, and plant optimization. They have strong leadership skills and have managed numerous projects from inception through completion.
Mosleh Zober Khidir provides his curriculum vitae, which includes his contact information, education history, work experience, skills and qualifications. He has over 25 years of experience in mechanical engineering, logistics, project management and construction roles. He is fluent in Kurdish, English and Arabic and has worked on water treatment plants, pipeline installation, and other infrastructure projects throughout Iraq.
Sivaprasad Patro is a mechanical engineer with experience maintaining recovery plants and various equipment. He has worked as a site engineer and graduate engineer trainee. Currently he works as a mechanical engineer focused on recovery maintenance at JK power plant in Rayagada, Odisha. He has a B.Tech in mechanical engineering and is seeking to apply his skills and experience in mechanical maintenance.
This document is a curriculum vitae for Akposeiyifa Joseph Ebufegha, a Principal Reservoir Engineer with over 27 years of experience in reservoir and petroleum engineering. He has worked for Shell in Nigeria, Holland, and Oman, holding various leadership and technical roles managing major projects, reserves evaluations, and reservoir simulations. His expertise includes reservoir management, production forecasting, integrated production systems modeling, and project management.
Syed Kashif Anwar is seeking a senior position in engineering and has over 18 years of experience in oil and gas refining. He currently works as the Group Head of the Asphalt Air Blowing Unit at Pak-Arab Refinery Limited, Pakistan's largest oil refinery. Some of his key responsibilities include process monitoring and optimization, project pre-commissioning, hazard studies, and unit start-up and shutdown. He has extensive experience in process engineering, commissioning, troubleshooting, and quality control.
Ian Slattery is a chemical engineer with over 9 years of experience in process development, equipment design, and project management across various industries such as water treatment, oil production, and refrigeration. He has worked as a consultant, research engineer, lead engineer, and intern. His expertise includes process simulation, cost analysis, equipment design, scale-up, experimental design, and project planning. He holds several patents and has managed projects on time and on budget.
Susan Cassidy has over 15 years of experience as a process engineer, primarily working on refinery projects. She received her Bachelor's degree in Chemical Engineering in 2000. Her career includes roles as a process engineer at Engen Refinery and Foster Wheeler, where she led engineering projects in South Africa, Malaysia, Thailand, Kuwait, and Canada. Currently, she is the Principal Process Engineer at Engen Refinery, leading the Utilities group and overseeing various water reduction initiatives and projects.
Ukeje provides over 8 years of experience in engineering design, construction, and commissioning for oil and gas onshore and offshore facilities. He has worked on major projects for Shell, Total, and Saipem. Currently, he serves as a senior process and utility commissioning engineer for the $3.3 billion Total Egina FPSO commissioning project.
Sharath Kumar has over 19 years of experience in operations and maintenance roles in the industrial gases industry. He is currently the Maintenance Controller at Gulf Cryo in Kuwait, where he is responsible for planning and implementing maintenance programs to achieve high plant reliability. Prior to this, he held shift leader roles with responsibilities like safely operating air separation plants, implementing safety procedures, and ensuring high equipment availability. He has expertise in air separation plants and cryogenic equipment maintenance.
Steve Wonnacott has over 30 years of experience in utilities operations, engineering, and process safety management. He is currently the Utilities Operations Coordinator for Suncor Energy's Fort Hills Project, where he is responsible for overseeing the design, construction, commissioning, startup and operation of the project's utilities plant. Previously, he held several leadership roles with increasing responsibility in utilities operations and engineering for major energy and manufacturing projects.
Enrico S. Simon is applying for a Piping Design Engineer position. He has over 9 years of experience in piping design, layout, modeling, and coordination across various projects in Southeast Asia and the United States. His experience includes conceptual design, 3D modeling, isometric drawing production, and on-site support for projects in industries like oil and gas, power, and chemicals. He holds a Bachelor's degree in Mechanical Engineering and is proficient in piping design software like PDS, SP3D, and AutoCAD.
The document is a resume for Himansu Sekhar Pati summarizing his work experience and qualifications. It states that he has 7 years of experience as a reservoir engineer working on production and exploration projects for major oil companies including Shell and British Gas. His experience includes reservoir modeling, simulation, monitoring, enhanced oil recovery studies, field development planning, and reserves estimation. He has a Bachelor's degree in Petroleum Engineering from Indian School of Mines and is pursuing a Master's degree through distance learning from Heriot-Watt University.
PROFESSIONAL EXPERIENCE for Hamid AL-NuaimiHamid Water
油
The document summarizes Hamid Al-Nuaimi's professional experience as a site engineer and field engineer working on water and sewage infrastructure projects in Iraq and as a trainer for Apple in California. As a site engineer, he supervised the rehabilitation of wastewater facilities and pumps in Baghdad. As a field engineer, he managed subcontractors and designed and installed new pipes and pumps. As a trainer for Apple, he trained new technicians and developed standard operating procedures.
Erica R. Anderson has over 4 years of experience as a Field Engineer Supervisor and Senior Data Analyst for Schlumberger, where she managed teams, projects, equipment, and HSE programs offshore. She has strong skills in data analysis, process improvement, and computer systems. Erica earned a BS in Chemical Engineering from Texas A&M University, where she worked on a senior design project for Celanese developing an environmentally friendly process for acetic anhydride production.
- Vijay Prakash is a chemical engineer with over 5 years of experience in project management, plant maintenance, and process engineering for petrochemical, oil & gas, and waste management facilities.
- He has led projects involving the installation of equipment like centrifugal compressors, STPs, ETPS, and pollution control devices.
- Vijay Prakash also has experience in areas like process design, piping, procurement, commissioning, startup coordination, and developing client presentations.
Thomas Mathew has nearly 24 years of experience in strategic planning, project management, and utility operations. He currently works as a Senior Specialist in Planning at Power and Water Utility Company for Jubail and Yanbu in Saudi Arabia, where he is responsible for facilities planning, capital expenditure planning, and infrastructure development projects. Previously he held engineering and management roles with Reliance Petroleum Limited and Hindustan Paper Corporation Limited, gaining experience in power plant operations, maintenance, and quality management systems.
How to Build a Maze Solving Robot Using ArduinoCircuitDigest
油
Learn how to make an Arduino-powered robot that can navigate mazes on its own using IR sensors and "Hand on the wall" algorithm.
This step-by-step guide will show you how to build your own maze-solving robot using Arduino UNO, three IR sensors, and basic components that you can easily find in your local electronics shop.
Integration of Additive Manufacturing (AM) with IoT : A Smart Manufacturing A...ASHISHDESAI85
油
Combining 3D printing with Internet of Things (IoT) enables the creation of smart, connected, and customizable objects that can monitor, control, and optimize their performance, potentially revolutionizing various industries. oT-enabled 3D printers can use sensors to monitor the quality of prints during the printing process. If any defects or deviations from the desired specifications are detected, the printer can adjust its parameters in real time to ensure that the final product meets the required standards.
Preface: The ReGenX Generator innovation operates with a US Patented Frequency Dependent Load
Current Delay which delays the creation and storage of created Electromagnetic Field Energy around
the exterior of the generator coil. The result is the created and Time Delayed Electromagnetic Field
Energy performs any magnitude of Positive Electro-Mechanical Work at infinite efficiency on the
generator's Rotating Magnetic Field, increasing its Kinetic Energy and increasing the Kinetic Energy of
an EV or ICE Vehicle to any magnitude without requiring any Externally Supplied Input Energy. In
Electricity Generation applications the ReGenX Generator innovation now allows all electricity to be
generated at infinite efficiency requiring zero Input Energy, zero Input Energy Cost, while producing
zero Greenhouse Gas Emissions, zero Air Pollution and zero Nuclear Waste during the Electricity
Generation Phase. In Electric Motor operation the ReGen-X Quantum Motor now allows any
magnitude of Work to be performed with zero Electric Input Energy.
Demonstration Protocol: The demonstration protocol involves three prototypes;
1. Protytpe #1, demonstrates the ReGenX Generator's Load Current Time Delay when compared
to the instantaneous Load Current Sine Wave for a Conventional Generator Coil.
2. In the Conventional Faraday Generator operation the created Electromagnetic Field Energy
performs Negative Work at infinite efficiency and it reduces the Kinetic Energy of the system.
3. The Magnitude of the Negative Work / System Kinetic Energy Reduction (in Joules) is equal to
the Magnitude of the created Electromagnetic Field Energy (also in Joules).
4. When the Conventional Faraday Generator is placed On-Load, Negative Work is performed and
the speed of the system decreases according to Lenz's Law of Induction.
5. In order to maintain the System Speed and the Electric Power magnitude to the Loads,
additional Input Power must be supplied to the Prime Mover and additional Mechanical Input
Power must be supplied to the Generator's Drive Shaft.
6. For example, if 100 Watts of Electric Power is delivered to the Load by the Faraday Generator,
an additional >100 Watts of Mechanical Input Power must be supplied to the Generator's Drive
Shaft by the Prime Mover.
7. If 1 MW of Electric Power is delivered to the Load by the Faraday Generator, an additional >1
MW Watts of Mechanical Input Power must be supplied to the Generator's Drive Shaft by the
Prime Mover.
8. Generally speaking the ratio is 2 Watts of Mechanical Input Power to every 1 Watt of Electric
Output Power generated.
9. The increase in Drive Shaft Mechanical Input Power is provided by the Prime Mover and the
Input Energy Source which powers the Prime Mover.
10. In the Heins ReGenX Generator operation the created and Time Delayed Electromagnetic Field
Energy performs Positive Work at infinite efficiency and it increases the Kinetic Energy of the
system.
The Golden Gate Bridge a structural marvel inspired by mother nature.pptxAkankshaRawat75
油
The Golden Gate Bridge is a 6 lane suspension bridge spans the Golden Gate Strait, connecting the city of San Francisco to Marin County, California.
It provides a vital transportation link between the Pacific Ocean and the San Francisco Bay.
Lecture -3 Cold water supply system.pptxrabiaatif2
油
The presentation on Cold Water Supply explored the fundamental principles of water distribution in buildings. It covered sources of cold water, including municipal supply, wells, and rainwater harvesting. Key components such as storage tanks, pipes, valves, and pumps were discussed for efficient water delivery. Various distribution systems, including direct and indirect supply methods, were analyzed for residential and commercial applications. The presentation emphasized water quality, pressure regulation, and contamination prevention. Common issues like pipe corrosion, leaks, and pressure drops were addressed along with maintenance strategies. Diagrams and case studies illustrated system layouts and best practices for optimal performance.
Best KNow Hydrogen Fuel Production in the World The cost in USD kwh for H2Daniel Donatelli
油
The cost in USD/kwh for H2
Daniel Donatelli
Secure Supplies Group
Index
Introduction - Page 3
The Need for Hydrogen Fueling - Page 5
Pure H2 Fueling Technology - Page 7
Blend Gas Fueling: A Transition Strategy - Page 10
Performance Metrics: H2 vs. Fossil Fuels - Page 12
Cost Analysis and Economic Viability - Page 15
Innovations Driving Leadership - Page 18
Laminar Flame Speed Adjustment
Heat Management Systems
The Donatelli Cycle
Non-Carnot Cycle Applications
Case Studies and Real-World Applications - Page 22
Conclusion: Secure Supplies Leadership in Hydrogen Fueling - Page 27
1. Frzan Fraidoon Ali
+964 (0) 770 221 6342
Frzan.Ali@Outlook.com
Iskan, Erbil, Iraq
Education:
Holding a Masters degree in Reservoir Engineering in 2nd place from the University of Kurdistan-
Hewler. (2015 - 2017). Thesis Title (Application of Reservoir Performance Modeling for Production
Optimization: A Water Coning Study in Kurdistan Region of Iraq)
Holding a Bachelors degree in Petroleum Engineering in 2nd Place from University of Kurdistan
Hewler, 2010 2014. Individual Project Title (Analyzing the Impact of Lost Circulation in Naturally
Fractured Reservoir)
Work Background:
Worked at HKN Energy Company as a Reservoir Engineer (Jun 2018 Jul 2020)
Using Saphir and Topaze software from KAPPA for pressure and rate transient analysis for
the wells, to analyze reservoir parameters and design well tests.
Using Harmony Enterprise software from IHS and MBAL from IPM, to calculate the
static and dynamic material balance and decline curve analysis.
Using Prosper software from IPM to conduct nodal analysis and vertical flow profile of wells, and
calculated BHP and study different artificial lift methods
Using PVTP software from IPM to conduct PVT analysis and apply different correlations to
best match reservoir conditions.
Using GAP software from IPM to conduct field performance analysis and production allocation for
commingled wells.
Using Petrel and Eclipse software from Schlumberger, to perform a numerical simulation of the
reservoir and conduct a variety of reservoir engineering studies.
Ensure that the data necessary is acquired for and adequate reservoir description and understanding.
Assist in reservoir operations during the drilling/testing phase.
Ensuring the day-to-day production behavior of the wells in consultation with the
Reservoir Engineer/Reservoir Engineering Manager
Interpreting all required data: well testing, production, and PVT. Gather, report, and
analyze reservoir information for the Block.
Conduct Material Balance calculations; static and dynamic
Construct, develop, operate, and analyze reservoir simulation using Eclipse Software
Work with geology and petrophysics team on development programs
Provide technical support for well-testing activities including program design, execution,
and data analysis.
Work with the subsurface team putting together tenders and doing evaluations of bids
for subsurface work.
Work with subsurface and operations team optimizing well completion schemes.
Participate in the construction and implementation of well evaluation programs
Provide reservoir performance data to support facility engineering in developing production
facilities and transportation options such as pipelines.
Work with drilling and operations staff to provide well planning and execution support as needed
2. Worked in HKN Energy Company as Production Engineer (2015 2017)
Responsible for working with the Production/Operations, Maintenance, Commercial Operations,
and Technical Services departments to assist in the management and optimization of the facility
Participate in project technical review to ensure efficient/economic project delivery
Monitor corrosion and resolve paraffin-scaling issues
Participate in integrated reservoir simulation studies, which include data analysis, model
construction, history matching, calibration, and prediction
Monitor well and reservoir performance and recommend appropriate actions for improving
the production and reserves
Participate in many HOZOP studies related to oil and gas upstream facilities
Assist in preparing detailed well intervention job programs and assist job supervisor in the
field to obtain required well/reservoir performance data
Monitor and analyze the production facilitys performance on a daily basis
Coordinate with the logistic department to organize production equipment, and develop an
inventory for the production departments equipment
Create a well-lost report on a monthly basis for each well
Create and monitor LOS and OPEX summary for each well
Worked with Schlumberger Company in Russian Federation as field Engineer (Aug 2014 Apr
2015)
Running all MWD and LWD tools with full competency
Reporting Recorded and real data to clients
Running LWD jobs in vertical, side-track and horizontal wells
Working 6x3 weeks in Northern Siberia, Russian Federation.
Professional Petroleum and Reservoir Engineering Certifications:
Integrated Production Modeling Petroleum Experts Nov 2019
IWCF Well Intervention Pressure Control Level 2 Erbil, Iraq, Oct 2019
Harmony Forecast - IHS Markit, Dubai, UAE, Sep 2019
Harmony Reservoir Conventional Reservoirs IHS Markit, Dubai, UAE, Sep 2019
Eclipse Black-oil Reservoir Simulation Schlumberger, Houston, Texas, USA, Aug 2019
Pressure and Rate Transient Analysis course by KAPPA, March 2019
Engineering course from Schlumberger; TELESCOPE Measurement from Siberian Training
Center, Tyumen Russian Federation 2014
Engineering course from Schlumberger; Measurement Zero from Siberian Training Center,
Tyumen Russian Federation 2014
3. Trainings:
Trainings with Schlumberger Company
Production Logging PLT
Reservoir Fluid Sampling and Analysis RSA
Schlumberger Reservoir Laboratories Fluids
PVT Laboratory Analysis
Enhanced Oil Recovery
Flow Assurance Studies
Crude Analysis
Water Analysis
Enhance Oil Recovery Studies EOR
Drilling and Measurement Radiation
Advanced Wireline Operation
Engineering Software:
Schlumberger Software o Eclipse 100
Petrel
Maxwell
Integrated Production Modelling IPM Software
PROSPER
MBAL
PVTP
REVEAL
RESOLVE
GAP
KAPPA Software
Saphir NL
Topaze NL
Rubis
Azurite
Emeraude
Citrine
IHS Markit
Harmony Enterprise
4. Language:
English: Fluent
Kurdish: Native
Turkish: Good
Arabic: Advanced
Linguistic Tests:
Scored 95 out of 120 in TOEFL iBT (Jan 2017)
Computer Skills:
Microsoft Excel (Certified Microsoft Specialist)
Microsoft Word (Professional)
Microsoft PowerPoint (Professional)
Microsoft Project (Advanced)
Microsoft Access (Advanced)
Reference
References are available upon request