�ݺ�ߣ

CURRICULUM VITAE
PERSONAL DATA:
SURNAME: EZEUKWU
MIDDLE NAME: KENNETH
FIRST NAME: CHUKWUNWEIKE
ADDRESS: #12, EKE LANE, UTAGBA OGBE, KWALE,
DELTA STATE
OIL FIELD EXPERIENCE: +9 YEARS
EMAIL: foxchuky@yahoo.co.uk
PHONE NUMBERS: +2348033905840
NATIONALITY: NIGERIAN
STATE OF ORIGIN: DELTA
LOCAL GOVERNMENT: NDOKWA WEST
PLACE OF BIRTH: KWALE, DELTA STATE
DATE OF BIRTH: 12TH
NOVEMBER, 1983
SEX: MALE
OBJECTIVE: TO WORK IN A DYNAMIC ESTABLISHMENT, WHERE GROWTH IS
SUSTAINED AND TEAMWORK IS MOTIVATED. TO BE PART OF A
WORK FORCE WHOSE WORK ENVIRONMENT PROVIDES
LEARNING OPPORTUNITIES, CAREER DEVELOPMENT AND
MEANINGFUL CHALLENGES IN A SUSTAINABLE MANNER.
FIELD OF INTEREST WELL COMPLETIONS / INTERVENTION SERVICES AND
OPTIMISATION TECHNOLOGY, DRILLING, WELL ABANDONMENT
AND DATA BASE APPLICATION.
COMPANY WORKED FOR:
 BJ SERVICES NIGERIA LIMITED (2005 – 2006)
 MANSFIELD ENERGY NIGERIA LIMITED (2007 – DATE)

ACADEMIC RECORDS:
S/
N
NAME OF SCHOOL ATTENDED YEAR CERTIFICATE OBTAINED
1 University Of Benin 1999 - 2004 B. Eng Petroleum Engineering
2 Utagba Ogbe Grammer School Kwale 1990 – 1995 West African School Certificate
Ordinary Level
3 Eke Model Primary School, Kwale 1985 – 1989 First leaving Certificate
UNIVERSITY PROJECT
Comparative analysis between vertical and horizontal oil and gas wells.
PROFESSIONAL AFFILIATIONS
Member, Society of Petroleum Engineers (S. P. E.).
COMPANY POSITIONS HELD
POSITION COMPANY DATE
Senior Completions Engineer Mansfield Energy Nig. Ltd. 2011 - Date
Completions Engineer Mansfield Energy Nig. Ltd. 2007 - 2011
Assistant laboratory supervisor / Support Engineer BJ Services, Port Harcourt 2005 -2006
WORK EXPERIENCES
 Mansfield Energy Nigeria Ltd. Port Harcourt. [March. 2007 – Date]
(Senior Completions Engineer)
Key Responsibilities and accountabilities:
i. Prepare in coordination with other branches/clients petroleum development division, work
instruction programs specifying the required well completions, work over, drilling and testing
activities in accordance with company and well objectives.
ii. Prepare Drilling, Work-over and completion programs with the relevant operational cost using the
updated computer software (drill string design, casing design, drilling fluids, cementing, fishing,
wellheads, testing and completions of vertical and horizontal Wells).
iii. Coordinate and supervise completions projects and engineering work for both offshore, swamps and
land rigs.
iv. Perform and supervise the installation of completions equipments for the following;
- Vertical wells: exploration and development wells
- Side track – re-entry: exploration and development wells
- Horizontal wells using the new technology for deviated and horizontal wells
- Standard completion and dual completion strings
- ESP’s completion string
- Gas lift completion string
- Single and a dual completion string inside casing and open hole gravel pack.

- Special completion for horizontal wells
- Smart completion w/ high technology for horizontal well.
v. Carries out as assigned studies addressing specific operational problems and submit appropriate
recommendation for cost-efficient and immediate resolution of such problems through modification
of methods, standardization of practices or introduction of new technology and materials with the
aim to reduce the operation cost.
vi. Prepares AFEs and operational completion programs for assigned project.
vii. Plan logistics for work-over and completion operations, well intervention work and manage
equipment preparations and testing.
viii. Optimizing deliverability and reservoir development of hydrocarbon resources through the design,
planning, execution and analysis of fracture stimulations projects.
ix. Manages completion equipment inventory levels and prepares completion diagrams and end of well
reports.
x. Troubleshoot well and completion related problems. Prepare detailed programmes and conduct
peer reviews and risk assessments for the planned activities to bring about safe and efficient
operations.
xi. Determining primary and remedial cementing procedures along with the design and installation of
tubulars, packers, subsurface control and surveillance equipment.
xii. Evaluate/recommend technology, equipment, materials and services pertaining to well completion
and well intervention operations including personnel competency.
xiii. Assist Production Technologist with problem wells.
xiv. Excellent analytical and problem solving skills, outcome focused, innovative and confident mentor.
xv. Participate in well reviews to assist with diagnosis of well performance problem, and recommend
programs for improvement or remediation of specific wells.
xvi. Ensure effective production data management in conjunction with the Operations department.
xvii. Handle special projects, as assigned.
OTHER SKILLS:
i. Evaluation of production performance including associated risk assessment for current installation,
as well as advantages and limitations of new well technology.
ii. Supervise engineering work in well performance analysis, water conformance and production and
injection optimization related with EOR/IOR projects.
iii. Track records in Field Development Planning and execution, Completion design, Dynamic Well
behavior, Lift curves, de-bottleneck analysis, Material Balance, Drainage pattern & Well and
Reservoir recovery optimization, PVT analysis, Well Test design and execution,
iv. Track record in Production System Asset Optimization, Reservoir Planning & Monitoring, Lift
Modelling, Forecasting, by Asset, Reservoir and by string,
v. Full dynamic understanding from reservoir to point of sales, including lift, sampling, testing,
processing, measuring, losses, hydrocarbon accounting etc…
vi. Conduct and review geological, reservoir, and well test evaluation reports and studies. Work closely
with Reservoir Engineer to build and maintain the reservoir model.
vii. Provide technical support to Operations in regard to compliance, environmental and safety audits.
viii.Supervise the general equipments maintenance (Disassembling, Assembly, Pressure Testing and
Bulking) of Lock Plugs, bridge plugs / cement retainers, Liner hangers and Completions equipments.
ix. Deployment and Retrieval (temporal well suspension) of Lock Plug.
x. Well completions design and programs, QC of well completions accessories.

xi. Deployment of well completions tools (Upper & Lower Completions).
xii. Design of Sand Control programs.
xiii. Supervise and QC field development planning and optimization.
xiv. Gas Lift Designs and Calibrations.
xv. Configuration of Resflow Screen Nozzles for production optimization.
xvi. Assembling of Drillable Bridge Plugs and Cement Retainer.
xvii. Preparation of tenders for the award of contracts.
xviii. Preparation of pre-job and post job reports
xix. Clients interface on behalf of the company.
xx. Provision of support for ongoing Well Services operations.
 BJ Services Company Nig. Ltd. Port Harcourt. [Sept. 2005 – Sept. 2006]
NYSC (Engineering Department/Laboratory)
i. Preparation of tenders for the award of contracts.
ii. Preparation of pre-job and post job reports and attending meetings on behalf of the company.
iii. Designing of cement slurries (Cementation design for well) under reservoir conditions to meet job
specifications.
iv. Client interface and development of good relationships with well Engineering Teams.
v. Provision of support for ongoing Well Services operations.
 BJ Services Company Nig. Ltd. Port Harcourt. [March. 2005 – Sept. 2005]
Graduate Engineer (Engineering Laboratory)
Job responsibilities are as above including;
i. Performing Cementing analysis and Stimulation Design under laboratory condition.
ii. Carrying out of mechanical and chemical laboratory tests in a precise and accurate manner,
recording results and writing reports.
iii. Routine maintenance of laboratory equipment such as: Ultrasonic Cement Analyzer, HPHT and
Atmospheric Consistometers, HPHT Curing Chambers, Six-Speed Fann Viscometer.
 Halliburton Energy Services Company, Port Harcourt. [Jan. 2004 – June. 2004]
Trainee Engineer (Tools and Testing / Down Hole Department)
i. Preparation (Disassembling and assembling) of down hole equipments to be sent to the rig for
deployment.
ii. Pressure testing the dressed / function testing prepared equipments to ensure their status
and efficiency before sending them to the rig.
iii. Inspecting (QAQC) of equipments & working environments to ensure safety standards are met.
 Oil Test Group / SPDC Port Harcourt. [Dec.2001-March. 2002]
Trainee Engineer [Distillation Lab / Routine Laboratory PSC – CEM]
i. PVT modeling analysis and modeling including black oil, condensate and compositional fluid
models.
ii. Determination of water cut, sand sieve analysis, and general routine analysis for wellhead
crude using Dean and stack method.
iii. Liaising with clients to determine and meet up with their demand.

SAFETY COURSES / CERTIFICATE
DATE COURSE COMPANY
2013 Health, Safety & Environmental Awareness Course Mansfield Energy
2013 Basic First Aid Certificate Mansfield Energy
2012 Leadership Communication Skills ExxonMobil
2013 BOSIET HUET / Fire Fighting Mansfield Energy
2009 Permit To Work / General Offshore Tips Course Mansfield Energy
2007 Basic Health, Safety and Environment Mansfield Energy
2007 Defensive Driving Certification Mansfield Energy / SPDC
2007 Swimming Training / Certification Mansfield Energy / SPDC
INDUSTRY TRAINING HISTORY
DATE COURSE COMPANY
2015 Gas Lift Training Course (Design / Valve
Calibration / Installation)
American Completions
Tools - Mansfield Energy,
2014 Advance Tools Specialist Engineer Training -Lock-
plugs, C-Flex (Temporary / Permanent Well
Suspension)
Archer Wells, Stavanger,
Norway ,
2014 Iso 9001-2008 Internal Auditors Certification
Training
Mansfield Energy / Pucka
Touch Stewards
2013 Iso 9001-2008 Training / Internal Auditors
Training
Mansfield Energy / Pucka
Touch Stewards
2013 Gas Lift Training Course (Design / Valve
Calibration / Installation)
American Completions
Tools, Dallas, USA
2012 Leadership Communication Skills ExxonMobil, Nigeria
2012 Drillable Bridge Plug and Cement Retainer American Completions
Tools / Mansfield
2012 Liner Hanger System Chancellor Oil Tools /
Mansfield
2010 Tools Specialist Engineer (VMB Plug)
(Temporary / Permanent Well Suspension)
Archer Wells, Norway /
Mansfield Energy
2010 Artificial Lift / Gas Lift Design Weatherford / Mansfield
2010 Stuck Pipe Prevention SPDC
2010 Well Completions (Design, Assembling and
Installation)
Mansfield / BJ Services /
Backer Oil Tools
2008 Sand Control Analysis / Designs Mansfield Energy
2008 Screen ICD Re-Configuration / Installation Mansfield Energy / Reslink
2008 Production Management / Enhancement Course SPE / Mansfield Energy
2006 Cementing and Stimulation laboratory routine
practices (Designs and execution)
BJ Services Nigeria

TECHNICAL AND OPERATIONAL COMPETENCIES
i. Well completions designs / completions installation (tools / accessories deployment)
ii. General Gas Lift Design / Installation.
iii. Enhance Oil Recoverability.
iv. Tender cost analysis for the awards of contract.
v. Sand Control Analysis (Using Special Sand Soft Ware “SAND+
) for open hole completion.
vi. Nodal Analysis to improve and equalize flow across pay zone (Using Special Software NETool™).
vii. Well abandonment design and installation (Lock Plug Applications, bridge plugs, etc).
viii.Cementing Analysis / Design under laboratory conditions by simulating reservoir temperatures and
pressures.
ix. Ability to work in multi-disciplinary teams, build consensus on and document work and
recommendations.

QAQC – QUALITY ASSURANCE AND QUALITY CONTROL
i. Proper documentation of all equipment maintenance records.
ii. Quality check on all equipment on shelve and before load-out to field.
iii. Hydro testing and Pressure testing of equipments to ascertain their status before load-out.
iv. Routine maintenance of equipment to ensure fitness for use and also to prevent failure.
v. Submits accurate and timely paper work, job reports and captures any lessons learned.
vi. Communicates with the team on a frequent basis to implement improvement in
Job procedures, equipment, personnel, logistics, and procurement.
PROJECTS & ACHIEVEMENTS
ADDAX (Offshore Project)
i. Installation of down-hole tools (Open Hole Completions / Upper Completions);
Using Baker SC-1R Packer on ;
- Adanga North Horizontal (ADNH-13H) Well (Upper & Lower Completions)
- Adanga South Horizontal (ADS-16H) Well (Upper & Lower Completions)
- Adanga South Horizontal (ADS-19H) Well (Upper & Lower Completions)
- Kita Marine Horizontal (KTM-9H) Well (Upper & Lower Completions)
- Ebughu-17H (4-1/2” Stand Alone Screens Completions / Upper Completions)
- ETC
ADDAX (Land Project)
i. Took Part In The Installation of down-hole tools (Upper and Lower Completion) ;
- Ossu-20H Well (Upper and Lower Completions)
- Ossu-14H Well (Upper and Lower Completions)
- ETC
SPDC (Swamp Project)
- SOKU 55 Well (6 5/8” Resflow ICD Screen Open Hole Completion with Zonal
Isolation packer, Lower Completions)
- SOKU 57 Well (4 ½” Resflow ICD Screen Open Hole Completion with Zonal Isolation
packer, Lower Completions)
- Nembe-67 Well (4-1/2” Stand Alone Screen Open Hole Completion)
- ETC

SPDC (Land Project)
- AGBADA-70 Well (Lower Completions Operations for dual completions, Installation
of Screens across the two perforated zones)
- ETC
STERLING GLOBAL (Land Project)
- OKW 10 Well (6-5/8” Stand Alone Screen Open Hole Completion)
- ETC
AFREN (Offshore Project)
- Okoro 4 Well (6-5/8” Stand Alone Screen Open Hole Completion)
- ETC
EXXONMOBIL (Offshore Project)
- Oso-73H Well (Installation of BJ “Comp – Perm packer”, Lower Completions)
- Ubit 173K Well (Installation Of ICD Nozzle For Production Optimization)
- Ubit 181C Well (Installation Of ICD Nozzle For Production Optimization)
- ETC
Total E&P Nigeria Limited (Deep Offshore Project)
- Usan-424 (Installation and Retrieval Of Mechanical Barrier Plug –
Well-suspension).
Well-suspension).
Well-suspension).
Well-suspension).
Well-suspension).
Well-suspension).
Well-suspension).
Well-suspension).
- Akpo-210 (Retrieval Of 14” VMB Plug)
- Usan-233 (Installation Of Mechanical Barrier Plug – Well-suspension).
-
- ETC.
COMPUTER / OTHER SKILLS

i. Proficiency in the use of Microsoft Office Suite (Microsoft Word, MS Excel, MS Power Point,
Microsoft Outlook ETC).
ii. Use of “Sand” Analysis Application for reservoir simulation.
iii. Use Of NETool™ for reservoir fluid management
iv. Good organizational and interpersonal skills.
v. Provision of detailed engineering and technical support to all activities relating to bidding.
vi. Effective team player.
vii. Strong commitment to safety, quality and efficiency.
viii. Effective communication skills. ETC.
ix. Innovative with strong analytical and problem solving skills
x. Actively shares Best Practices and lessons learned.
xi. Strong operational skills to deliver field projects across different services on time and within
budget.
xii. Excellent management capabilities.
REFEREE
Engr. Tony Ezeukwu Engr. Charles Ihekona
General Manager General Service Manager
Pan Ocean Oil Corporation Mansfield Energy Nigeria Limited
The Ark Towers Plot 17A 8th
Floor, Foreshore Towers,
Ligali Ayorinde Street, 2A Osborne Road,
Victoria Island, Lagos Ikoyi, Lagos
+234 8035351623 +2348034307821

�ݺ�ߣ

Kenneth Ezeukwu CV-3(2) Updated

More Related Content

What's hot (20)

Similar to Kenneth Ezeukwu CV-3(2) Updated (20)

Kenneth Ezeukwu CV-3(2) Updated