Manuel_Olivares_Resume_LinkedIn_2016
Download as DOC, PDF1 like128 views
Manuel Olivares has over 5 years of experience using Dassault CATIA and Siemens NX CAD software. He has a Bachelor of Science in Aerospace Engineering from Embry-Riddle Aeronautical University. Currently, he works as an Aeronautical Engineer for Northrop Grumman, where he has supported various programs including unmanned aerial vehicles, the F/A-18, EA-18G, and James Webb Space Telescope. His responsibilities include aircraft design, subsystem integration, trade studies, and technical documentation.
1 of 1
Download to read offline
Recommended
chris guidice RESUME Ver2
chris guidice RESUME Ver2Christopher Guidice
Ìý
Christopher Guidice is a professional engineer and analyst with over 25 years of experience performing simulation modeling, analysis, and data mining related to airspace and airport operations. He has worked for the MITRE Corporation since 2001 analyzing historical and simulated operational data to develop simulations and draw conclusions about airport and airspace design. Prior to MITRE, he worked for Innovative Solutions International where he managed a team developing aviation simulation tools.Resume
ResumeScott Borchers
Ìý
Scott Borchers has worked as a Mission Effectiveness Analyst and Flight Test Engineer for the F-35 program since 2014. He has experience planning and executing flight tests, developing analysis and database tools, and authoring technical documents. Borchers received his B.S. in Mechanical Engineering from South Dakota State University in 2014 and is currently pursuing his M.S. in Engineering from Texas Tech University while working full-time on the F-35 program.AAI Notable Projects
AAI Notable ProjectsSrijita Mori
Ìý
The document summarizes the notable projects from the candidate's work experience as an electrical engineer and systems engineer. As an Electrical Engineer II, the candidate worked on projects involving synchronizing data logs from multiple air and ground systems using MATLAB, and designing and testing a communications relay interface box. As an Electrical Engineer I, the candidate created a Simulink model to input real-time sensor data and commands for a motion table simulation. As a Systems Engineer I, the candidate replaced an obsolete firewall and qualified a second supplier for servos.JRP_resume_2016
JRP_resume_2016Jeremiah Phillips
Ìý
Jeremiah Phillips is an electro-mechanical engineering technology graduate from Penn State University with experience in CAD, PLCs, machining, welding and automotive mechanics. He has worked as a drivetrain engineer designing crane components using Creo and updating drawings. His senior project involved designing an engine dynamometer system using LabVIEW. He is seeking new opportunities and his contact information is provided.Shahzad Sikandaruk
Shahzad SikandarukShahzad Sikandar
Ìý
Shahzad Sikandar is an experienced planner and delay analyst with 12 years of experience in construction planning, programming, delay analysis, and claims. He has extensive experience using Primavera and other scheduling software. Currently he works as a senior planner for Parsons Brinckerhoff on the ASHGHAL LRDP Programme in Qatar, where he conducts delay analysis and develops recovery programs. He has previously worked on projects in the UK, Pakistan, and Qatar for contractors and clients across various sectors.Andre's Resume 
Andre's Resume Andre Hill
Ìý
Andre M. Hill has over 25 years of experience in transportation engineering with expertise in AutoCAD, research and development, data acquisition, and project management. He has held several roles with increasing responsibility supporting engineering teams and managing projects from initial planning through completion. Currently an Engineering Associate II, his experience includes creating design drawings, reviewing permits, preparing cost controls and technical reports, and conducting field investigations.DFMC SBAS Receiver Development
DFMC SBAS Receiver DevelopmentThe European GNSS Agency (GSA)
Ìý
The objectives are:
- to design, develop and test a prototype of the DFMC SBAS user terminal for the aviation SoL service, augmenting GPS and Galileo capabilities.
- the developed receiver, besides the SBAS DFMC functions (for GPS and Galileo)Portfolio
PortfolioSamGioia2
Ìý
This portfolio lists all of the major engineering projects I have worked on during my time at Cal Poly PomonaCV-Baghzouz Nour New
CV-Baghzouz Nour NewNour El Houda BAGHZOUZ
Ìý
Nour el Houda Baghzouz has over 6 years of experience in project planning and control working for Petrofac and Algeria Airlines. She has a Master's degree in mechanical power systems and aeronautics engineering and has skills in budgeting, scheduling, invoicing, and using software like Primavera and ANSYS. Her experience includes collaborating with cross-functional teams, monitoring project progress, and developing plans to achieve targets.Improving Flight Inspection by Automation Process
Improving Flight Inspection by Automation Processmdmannino
Ìý
The document summarizes efforts by ENAV, the Italian air navigation service provider, to improve its flight inspection processes through automation and implementation of a new Flight Inspection Planning and Post-Processing Tool (FLIPP-TMS). A business process modeling analysis was conducted to identify workflows and gaps between current and regulatory requirements. This led to a proposed "to-be" scenario to guide development of FLIPP-TMS, which is expected to support mission planning, task management, documentation, data collection and post-processing in order to increase efficiency and quality of flight inspection activities.Gtrack fleetca nbus
Gtrack fleetca nbusEUROPAGES
Ìý
GTrack Fleet is a vehicle tracking unit that provides extensive reporting capabilities through Globe Fleet Management System using GPS technology. GTrack CANbus adds fuel consumption, level, distance, and engine RPM readings from the vehicle's computer to provide more insights in addition to GTrack Fleet's features. Mobiliz offers sector-specific solutions through GManager applications that can include optional enhancements for applications like alarms, ambulances, and service buses.Art craft summary
Art craft summarywww.apphtech.com
Ìý
Arts & Crafts (English: art craft) handicraft products. That is, by hand or machine processing raw materials or semi-finished products, the value of art is a general term for a group. Crafts origin and life, but to create a larger than life value. It is the people's wisdom, fully embodies the human creativity and artistic, is human priceless. Typical handicrafts like, according to the material it is made chisel carved small natural gypsum ore. Give full play to its gypsum vivid color, fine crystal and pure texture of advantages, clever use of natural texture pattern, design, unique style, it looks elegant style, antique, called China a must.
Click Here to Learn More : WWW.ARTCRAFTCHINA.COMTOGF Classroom Series - M12 migration-planning-techniques
TOGF Classroom Series - M12 migration-planning-techniquesCuneyt Kaya
Ìý
This document outlines several migration planning techniques including the Implementation Factor Assessment and Deduction Matrix which lists factors that may affect implementation and actions to take, the Consolidated Gaps, Solutions and Dependencies Matrix which groups gaps with potential solutions and dependencies to create projects, the Architecture Definition Increments Table which lists projects and deliverables of transition architectures, the Transition Architecture State Evolution Table which shows how architectures will evolve through transition, and the Business Value Assessment Technique which evaluates the risk-value of projects.Risk Analysis of Linear Projects
Risk Analysis of Linear ProjectsIntaver Insititute
Ìý
In linear projects activities are associated with certain locations. They are usually construction projects, such as building and roads where each activities have location attributes in addition to duration, start and finish times, cost, resources and other attributes of traditional project schedules.
Time location charts are a way of visualizing project schedules with linear locations on the horizontal axis, and dates on the vertical axis. Schedule activities are then plotted onto the chart according to the locations over which they occur and the dates that the project schedule determines.
Time location charts could be presented for original project schedule and risks-adjusted project schedule.
Risk adjusted project schedule is a result of project risk analysis
AlwynSamuel-Design Eng
AlwynSamuel-Design EngSamuel Victor Alwyn
Ìý
Samuel Alwyn is a mechanical engineering graduate seeking a position where he can learn and contribute to efficient manufacturing. He has a Master's degree in mechanical engineering and certifications in product design and analysis. Alwyn has experience using CAD software like ProE and CATIA as well as simulation software like ANSYS and COMSOL. He has worked as a design engineer and CAD technician at Stryker Instruments where he created models and prints. Alwyn also has research experience in trajectory design and sensor development.Quantitative layout program
Quantitative layout programwww.apphtech.com
Ìý
Arts & Crafts (English: art craft) handicraft products. That is, by hand or machine processing raw materials or semi-finished products, the value of art is a general term for a group. Crafts origin and life, but to create a larger than life value. It is the people's wisdom, fully embodies the human creativity and artistic, is human priceless. Typical handicrafts like, according to the material it is made chisel carved small natural gypsum ore. Give full play to its gypsum vivid color, fine crystal and pure texture of advantages, clever use of natural texture pattern, design, unique style, it looks elegant style, antique, called China a must.
Click Here to Learn More : WWW.ARTCRAFTCHINA.COM
Resume_Brenden_Hogan_Spring16
Resume_Brenden_Hogan_Spring16Brenden Hogan
Ìý
Brenden Hogan is seeking an aerospace engineering, systems engineering, or operations position. He has a Bachelor's and Master's degree in Aerospace Engineering from the University of Colorado, Boulder. He has experience in systems engineering, integration and testing, operations, and small satellite development from internships at Northrop Grumman and JPL. He is proficient in MATLAB, C++, Java, Linux, Windows, and has led the development of the DANDE satellite as project manager through the Colorado Space Grant Consortium.Comparative Evaluation of Timing Model Extraction Methodologies at EAST-ADL...
Comparative Evaluation of Timing Model Extraction Methodologies at EAST-ADL...Alessio Bucaioni
Ìý
This document compares three methodologies for extracting timing models from design-level models: TIMMO2USE, DTILMT, and IH&TB. It establishes seven evaluation features to compare the methodologies, including separation of concerns, automation, maturity, scalability, number of extracted timing models, assumptions, and traceability. The document finds that TIMMO2USE is best for less software-extensive systems and legacy reuse, DTILMT proposes an automatic solution but needs improvement, and IH&TB represents current industry practice. Future work could expand the comparison to more methodologies and use case studies for quantitative analysis.Strayer cis 517 week 8 assignment 5 voip part 3
Strayer cis 517 week 8 assignment 5 voip part 3eyavagal
Ìý
cis 517 week 8 assignment 5 voip part 3 quality new,cis 517 week 8 discussion teams and communication new,strayer cis 517,cis 517,strayer cis 517 week 8 tutorial,cis 517 week 8 assignment,strayer cis 517 week 8 helpSamarKantiBarua
SamarKantiBaruaSamar Barua
Ìý
This document is a resume for Samar Kanti Barua, who has over 11 years of experience in the energy and aerospace industries specializing in product design, development, and analysis. He is currently an Assistant Lead Engineer at Vestas Technology R&D leading efforts in code development for wind turbine load modeling and analysis. Prior to this, he worked at GE-ITC as a Lead Engineer performing structural design calculations and FE analysis of major gas turbine components.Anitha Vanga
Anitha VangaAnitha vanga
Ìý
This document contains the resume of Anitha Vanga. She has 6 years of experience in engineering services, change management, new product introduction, and process planning for automotive companies. Her roles included creating bills of materials, planning assembly sequences, authoring work instructions, and implementing engineering changes for projects involving earthmoving vehicles, engines, and wheel loaders. She holds a Bachelor's degree in Mechanical Engineering and is proficient in English, Hindi, and Telugu.TOGAF Classroom Series - M10 adm phases (c application - d)
TOGAF Classroom Series - M10 adm phases (c application - d)Cuneyt Kaya
Ìý
This document summarizes Phases C and D of the ADM (Architecture Development Methodology). Phase C involves developing an application architecture that enables the business architecture and vision. It identifies gaps and candidate roadmap components. Phase D similarly develops a target technology architecture, identifies gaps, and roadmap components while enabling the application architectures. Both phases follow similar steps of developing baselines and targets, analyzing gaps, and creating outputs of architectures and roadmaps.MSNewman Resume_20160222
MSNewman Resume_20160222Mariah Newman
Ìý
This document contains contact and background information for Mariah Newman, including her education, skills, work experience, and projects. She has a Bachelor of Applied Science in Mechanical Engineering from the University of British Columbia. Her relevant work experience includes internships at Intel and Suncor Energy in facilities engineering and maintenance roles. She is currently working on her capstone design project involving the design of a robotic climber.Strayer cis-517-week-8-assignment-5-voip-part-3
Strayer cis-517-week-8-assignment-5-voip-part-3kxipvscsk02
Ìý
cis 517 week 8 assignment 5 voip part 3 quality new,cis 517 week 8 discussion teams and communication new,strayer cis 517,cis 517,strayer cis 517 week 8 tutorial,cis 517 week 8 assignment,strayer cis 517 week 8 helpAvinash_ Resume_
Avinash_ Resume_Avinash Patil
Ìý
Avinash Patil has over 24 years of experience in project management, including 15+ years specific experience. He is currently the Program Manager for a large transformation project for an Indian government power utility. Previously he has managed projects for clients in various industries, set up PMOs, and has expertise in planning and scheduling tools like Primavera and Microsoft Project.Webinar: DevOps - Redefining your IT Strategy
Webinar: DevOps - Redefining your IT StrategyEdureka!
Ìý
The free webinar on DevOps titled " DevOps - Redefining your IT Strategy " conducted by Edureka on 3rd December 2014resume V2
resume V2Devon Lawless
Ìý
Devon Lawless is an electrical engineer with experience working on teams and individually to research, create, and solve engineering problems within time and resource constraints. He has a Bachelor's degree in Electrical Engineering from BYU and an Associate's degree from WVC. His experience includes building battery and metal detection prototypes, as well as designing GPS and solar cell systems. He is proficient in electrical schematics, PCB layout, C/C++, debugging, and SOLIDWORKS.chrono resume Nick
chrono resume NickNick Fraser
Ìý
Philip Fraser has over 30 years of experience in front and back of house operations management, including as general manager of two Bonanza Buffet locations where he increased revenue by stabilizing staff turnover through fair treatment and honest communication. He also managed inventory by analyzing product usage and adjusting purchasing accordingly. Previously, he owned and operated a janitorial and carpet cleaning company for 10 years. He holds a diploma in Hotel and Restaurant Management from ICS Correspondence Institute.Clinesmith_resume
Clinesmith_resumeMaureen Clinesmith
Ìý
Maureen Clinesmith has over 20 years of experience leading business intelligence, finance, and strategy initiatives in the automotive and financial services industries. She has a proven track record of defining and implementing strategies, developing high-performing teams, and managing multi-million dollar projects. Her experience includes developing BI strategies, establishing centers of excellence, implementing forecasting and financial planning systems, and guiding strategic planning.Resume (4)
Resume (4)prashanth kumar
Ìý
The document is a resume for Prashanth Kumar Dasa. It summarizes his experience as a SQL Database Administrator over 4 years, including 10 months at Tata Consultancy Services and 3.2 years at AT&T. It lists his technical skills like SQL Server 2005/2008/2012 administration, high availability configurations, backup procedures and T-SQL programming. It also provides details of his most recent roles as a SQL DBA for Advanced Micro Devices and AT&T, responsibilities included database maintenance, upgrades, backups, performance monitoring and more.More Related Content
What's hot (16)
CV-Baghzouz Nour New
CV-Baghzouz Nour NewNour El Houda BAGHZOUZ
Ìý
Nour el Houda Baghzouz has over 6 years of experience in project planning and control working for Petrofac and Algeria Airlines. She has a Master's degree in mechanical power systems and aeronautics engineering and has skills in budgeting, scheduling, invoicing, and using software like Primavera and ANSYS. Her experience includes collaborating with cross-functional teams, monitoring project progress, and developing plans to achieve targets.Improving Flight Inspection by Automation Process
Improving Flight Inspection by Automation Processmdmannino
Ìý
The document summarizes efforts by ENAV, the Italian air navigation service provider, to improve its flight inspection processes through automation and implementation of a new Flight Inspection Planning and Post-Processing Tool (FLIPP-TMS). A business process modeling analysis was conducted to identify workflows and gaps between current and regulatory requirements. This led to a proposed "to-be" scenario to guide development of FLIPP-TMS, which is expected to support mission planning, task management, documentation, data collection and post-processing in order to increase efficiency and quality of flight inspection activities.Gtrack fleetca nbus
Gtrack fleetca nbusEUROPAGES
Ìý
GTrack Fleet is a vehicle tracking unit that provides extensive reporting capabilities through Globe Fleet Management System using GPS technology. GTrack CANbus adds fuel consumption, level, distance, and engine RPM readings from the vehicle's computer to provide more insights in addition to GTrack Fleet's features. Mobiliz offers sector-specific solutions through GManager applications that can include optional enhancements for applications like alarms, ambulances, and service buses.Art craft summary
Art craft summarywww.apphtech.com
Ìý
Arts & Crafts (English: art craft) handicraft products. That is, by hand or machine processing raw materials or semi-finished products, the value of art is a general term for a group. Crafts origin and life, but to create a larger than life value. It is the people's wisdom, fully embodies the human creativity and artistic, is human priceless. Typical handicrafts like, according to the material it is made chisel carved small natural gypsum ore. Give full play to its gypsum vivid color, fine crystal and pure texture of advantages, clever use of natural texture pattern, design, unique style, it looks elegant style, antique, called China a must.
Click Here to Learn More : WWW.ARTCRAFTCHINA.COMTOGF Classroom Series - M12 migration-planning-techniques
TOGF Classroom Series - M12 migration-planning-techniquesCuneyt Kaya
Ìý
This document outlines several migration planning techniques including the Implementation Factor Assessment and Deduction Matrix which lists factors that may affect implementation and actions to take, the Consolidated Gaps, Solutions and Dependencies Matrix which groups gaps with potential solutions and dependencies to create projects, the Architecture Definition Increments Table which lists projects and deliverables of transition architectures, the Transition Architecture State Evolution Table which shows how architectures will evolve through transition, and the Business Value Assessment Technique which evaluates the risk-value of projects.Risk Analysis of Linear Projects
Risk Analysis of Linear ProjectsIntaver Insititute
Ìý
In linear projects activities are associated with certain locations. They are usually construction projects, such as building and roads where each activities have location attributes in addition to duration, start and finish times, cost, resources and other attributes of traditional project schedules.
Time location charts are a way of visualizing project schedules with linear locations on the horizontal axis, and dates on the vertical axis. Schedule activities are then plotted onto the chart according to the locations over which they occur and the dates that the project schedule determines.
Time location charts could be presented for original project schedule and risks-adjusted project schedule.
Risk adjusted project schedule is a result of project risk analysis
AlwynSamuel-Design Eng
AlwynSamuel-Design EngSamuel Victor Alwyn
Ìý
Samuel Alwyn is a mechanical engineering graduate seeking a position where he can learn and contribute to efficient manufacturing. He has a Master's degree in mechanical engineering and certifications in product design and analysis. Alwyn has experience using CAD software like ProE and CATIA as well as simulation software like ANSYS and COMSOL. He has worked as a design engineer and CAD technician at Stryker Instruments where he created models and prints. Alwyn also has research experience in trajectory design and sensor development.Quantitative layout program
Quantitative layout programwww.apphtech.com
Ìý
Arts & Crafts (English: art craft) handicraft products. That is, by hand or machine processing raw materials or semi-finished products, the value of art is a general term for a group. Crafts origin and life, but to create a larger than life value. It is the people's wisdom, fully embodies the human creativity and artistic, is human priceless. Typical handicrafts like, according to the material it is made chisel carved small natural gypsum ore. Give full play to its gypsum vivid color, fine crystal and pure texture of advantages, clever use of natural texture pattern, design, unique style, it looks elegant style, antique, called China a must.
Click Here to Learn More : WWW.ARTCRAFTCHINA.COM
Resume_Brenden_Hogan_Spring16
Resume_Brenden_Hogan_Spring16Brenden Hogan
Ìý
Brenden Hogan is seeking an aerospace engineering, systems engineering, or operations position. He has a Bachelor's and Master's degree in Aerospace Engineering from the University of Colorado, Boulder. He has experience in systems engineering, integration and testing, operations, and small satellite development from internships at Northrop Grumman and JPL. He is proficient in MATLAB, C++, Java, Linux, Windows, and has led the development of the DANDE satellite as project manager through the Colorado Space Grant Consortium.Comparative Evaluation of Timing Model Extraction Methodologies at EAST-ADL...
Comparative Evaluation of Timing Model Extraction Methodologies at EAST-ADL...Alessio Bucaioni
Ìý
This document compares three methodologies for extracting timing models from design-level models: TIMMO2USE, DTILMT, and IH&TB. It establishes seven evaluation features to compare the methodologies, including separation of concerns, automation, maturity, scalability, number of extracted timing models, assumptions, and traceability. The document finds that TIMMO2USE is best for less software-extensive systems and legacy reuse, DTILMT proposes an automatic solution but needs improvement, and IH&TB represents current industry practice. Future work could expand the comparison to more methodologies and use case studies for quantitative analysis.Strayer cis 517 week 8 assignment 5 voip part 3
Strayer cis 517 week 8 assignment 5 voip part 3eyavagal
Ìý
cis 517 week 8 assignment 5 voip part 3 quality new,cis 517 week 8 discussion teams and communication new,strayer cis 517,cis 517,strayer cis 517 week 8 tutorial,cis 517 week 8 assignment,strayer cis 517 week 8 helpSamarKantiBarua
SamarKantiBaruaSamar Barua
Ìý
This document is a resume for Samar Kanti Barua, who has over 11 years of experience in the energy and aerospace industries specializing in product design, development, and analysis. He is currently an Assistant Lead Engineer at Vestas Technology R&D leading efforts in code development for wind turbine load modeling and analysis. Prior to this, he worked at GE-ITC as a Lead Engineer performing structural design calculations and FE analysis of major gas turbine components.Anitha Vanga
Anitha VangaAnitha vanga
Ìý
This document contains the resume of Anitha Vanga. She has 6 years of experience in engineering services, change management, new product introduction, and process planning for automotive companies. Her roles included creating bills of materials, planning assembly sequences, authoring work instructions, and implementing engineering changes for projects involving earthmoving vehicles, engines, and wheel loaders. She holds a Bachelor's degree in Mechanical Engineering and is proficient in English, Hindi, and Telugu.TOGAF Classroom Series - M10 adm phases (c application - d)
TOGAF Classroom Series - M10 adm phases (c application - d)Cuneyt Kaya
Ìý
This document summarizes Phases C and D of the ADM (Architecture Development Methodology). Phase C involves developing an application architecture that enables the business architecture and vision. It identifies gaps and candidate roadmap components. Phase D similarly develops a target technology architecture, identifies gaps, and roadmap components while enabling the application architectures. Both phases follow similar steps of developing baselines and targets, analyzing gaps, and creating outputs of architectures and roadmaps.MSNewman Resume_20160222
MSNewman Resume_20160222Mariah Newman
Ìý
This document contains contact and background information for Mariah Newman, including her education, skills, work experience, and projects. She has a Bachelor of Applied Science in Mechanical Engineering from the University of British Columbia. Her relevant work experience includes internships at Intel and Suncor Energy in facilities engineering and maintenance roles. She is currently working on her capstone design project involving the design of a robotic climber.Strayer cis-517-week-8-assignment-5-voip-part-3
Strayer cis-517-week-8-assignment-5-voip-part-3kxipvscsk02
Ìý
cis 517 week 8 assignment 5 voip part 3 quality new,cis 517 week 8 discussion teams and communication new,strayer cis 517,cis 517,strayer cis 517 week 8 tutorial,cis 517 week 8 assignment,strayer cis 517 week 8 helpViewers also liked (12)
Avinash_ Resume_
Avinash_ Resume_Avinash Patil
Ìý
Avinash Patil has over 24 years of experience in project management, including 15+ years specific experience. He is currently the Program Manager for a large transformation project for an Indian government power utility. Previously he has managed projects for clients in various industries, set up PMOs, and has expertise in planning and scheduling tools like Primavera and Microsoft Project.Webinar: DevOps - Redefining your IT Strategy
Webinar: DevOps - Redefining your IT StrategyEdureka!
Ìý
The free webinar on DevOps titled " DevOps - Redefining your IT Strategy " conducted by Edureka on 3rd December 2014resume V2
resume V2Devon Lawless
Ìý
Devon Lawless is an electrical engineer with experience working on teams and individually to research, create, and solve engineering problems within time and resource constraints. He has a Bachelor's degree in Electrical Engineering from BYU and an Associate's degree from WVC. His experience includes building battery and metal detection prototypes, as well as designing GPS and solar cell systems. He is proficient in electrical schematics, PCB layout, C/C++, debugging, and SOLIDWORKS.chrono resume Nick
chrono resume NickNick Fraser
Ìý
Philip Fraser has over 30 years of experience in front and back of house operations management, including as general manager of two Bonanza Buffet locations where he increased revenue by stabilizing staff turnover through fair treatment and honest communication. He also managed inventory by analyzing product usage and adjusting purchasing accordingly. Previously, he owned and operated a janitorial and carpet cleaning company for 10 years. He holds a diploma in Hotel and Restaurant Management from ICS Correspondence Institute.Clinesmith_resume
Clinesmith_resumeMaureen Clinesmith
Ìý
Maureen Clinesmith has over 20 years of experience leading business intelligence, finance, and strategy initiatives in the automotive and financial services industries. She has a proven track record of defining and implementing strategies, developing high-performing teams, and managing multi-million dollar projects. Her experience includes developing BI strategies, establishing centers of excellence, implementing forecasting and financial planning systems, and guiding strategic planning.Resume (4)
Resume (4)prashanth kumar
Ìý
The document is a resume for Prashanth Kumar Dasa. It summarizes his experience as a SQL Database Administrator over 4 years, including 10 months at Tata Consultancy Services and 3.2 years at AT&T. It lists his technical skills like SQL Server 2005/2008/2012 administration, high availability configurations, backup procedures and T-SQL programming. It also provides details of his most recent roles as a SQL DBA for Advanced Micro Devices and AT&T, responsibilities included database maintenance, upgrades, backups, performance monitoring and more.CSD Resume May2015
CSD Resume May2015Chad Dymeck
Ìý
This document is a resume for Chad Dymeck seeking an entry-level job in human services. It lists his contact information, objective, qualifications which include relationship building, mediation, creating safe environments, counseling skills and being empathetic. It also outlines his education as a BS in General Psychology from Kutztown University, honors as an Eagle Scout, and work experience doing seasonal maintenance for Maidencreek Township involving groundskeeping, equipment troubleshooting and volunteering at community events. References are available upon request.pankaj cv
pankaj cvPANKAJ KUMAR
Ìý
Pankaj Kumar is a mechanical engineer seeking a challenging career opportunity. He has relevant work experience and qualifications including a B.Tech in Mechanical Engineering. His past experience includes six months of industrial training at Federal Mogul GOETZE India where he worked on a statistical process control project monitoring piston production. He is proficient in AutoCAD, MS Office, and has experience working as a mechanical engineer in maintenance and quality control roles.Stellenbosch WPI IQP Research Project Report
Stellenbosch WPI IQP Research Project ReportBrandon Clark
Ìý
While the South African Bill of Rights establishes the provision of services to all residents, over 1.5 million households have limited or no electricity, refuse removal, water, and sanitation structures. This project aimed to assist in improving service delivery to informal settlements in Stellenbosch, South Africa, by assessing the municipality’s communication and data collection system. Through informational interviews with organisations working on data management and service delivery and engagements with residents of the informal settlement Mountain View, it was determined that the service request process needs to establish feedback loops, interdepartmental communication requires restructuring, and new technologies could improve communication with residents and increasing government transparency.Distributed automation sel_conf_2015
Distributed automation sel_conf_2015aragavan
Ìý
This is the Distributed Automation using Selenium Grid / AWS / Autoscaling presentation talk at Selenium Conference 2015, Portland , ORSenior Tax Manager Resume
Senior Tax Manager ResumeAlan Huerth, CPA
Ìý
Alan Huerth is seeking a senior tax management position with over 20 years of experience as a CPA and tax manager. He has extensive experience managing tax engagements and research for corporations, individuals, and partnerships. Previously, he worked at several large accounting firms in Florida, managing tax departments and supervising staff. He also has experience in the Canadian military conducting inspections and publishing reports.Mohd Imran CV
Mohd Imran CVEr.Imran khan
Ìý
Mohammad Imran is a mechanical engineer seeking new opportunities. He has over 10 years of experience as a project engineer and assistant manager in Saudi Arabia and India. His responsibilities included monitoring construction quality, coordinating subcontractors, designing machinery layouts, and ensuring safety compliance. He is proficient in CAD software and has experience with industrial projects involving piping, HVAC, plumbing, and fire protection systems.Similar to Manuel_Olivares_Resume_LinkedIn_2016 (20)
Resume Oct 2010
Resume Oct 2010Marky2245
Ìý
Mark Russo has over 20 years of experience in aviation and computer fields, working with large real-time systems for the US Air Force, FAA, and NASA. He has strong programming skills in C, C++, and other languages and experience developing software for air traffic control, aircraft avionics, and flight simulation. His background includes testing new radar systems, maintaining software for air traffic control systems, and interfacing hardware and software for aircraft cockpit simulations.Uma Sagar_c
Uma Sagar_cUmaSagar Sagar
Ìý
Arundhathi G. Krishnan is an experienced IT professional with 20 years of experience in aerospace design engineering at the Centre for Civil Aircraft Design and Development in Bangalore. She has developed several software packages for analyzing aerodynamic data, including graphical interfaces for input/output of data and interactive databases. She has also published numerous technical papers on her work related to aircraft like the SARAS and HANSA. She is proficient in programming languages like C, Fortran, and databases, and seeks a challenging technical role.My Qualifications
My QualificationsBrian Cullen
Ìý
Brian Cullen has over 12 years of experience in aerospace and mechanical engineering. He has a B.S. in Mechanical Engineering Technology and is proficient in CAD software like SolidWorks and Catia. His career includes positions as a mechanical engineer at Northrop Grumman developing spacecraft components, a manufacturing engineer focusing on tool design and process improvement, and internships in power generation and automotive repair.Curriculum Vita_Indrajeet Singh
Curriculum Vita_Indrajeet SinghIndrajeet Singh
Ìý
This document provides a summary of Indrajeet Singh's professional experience and qualifications. He has over 8 years of experience in aeronautical engineering, most recently as a project manager. He is proficient in areas such as project management, design and development, quality management, and aircraft systems analysis. He has worked on projects for organizations like Multi Role Transport Aircraft and National Aerospace Laboratories.Hard landing predection
Hard landing predectionRAJUPADHYAY44
Ìý
This document describes a major project to develop an E-Pilots system to predict hard landings during commercial flights. The system will use machine learning algorithms to analyze flight data and identify patterns that precede hard landings, providing pilots with real-time warnings. The objectives are to enhance aviation safety and reduce hard landings. The proposed system offers advantages over existing systems such as more accurate predictions and cost savings. The project will involve collecting and analyzing flight data, developing and testing machine learning models, and integrating the system into existing flight systems.DOC245-20240219-WA0000_240219_090212.pdf
DOC245-20240219-WA0000_240219_090212.pdfShaizaanKhan
Ìý
This document describes a major project to develop an E-Pilots system to predict hard landings during commercial flights. The system will use machine learning algorithms to analyze flight data and identify patterns that precede hard landings, providing pilots with real-time warnings. The objectives are to enhance aviation safety and reduce hard landings. The proposed system offers advantages over existing systems such as more accurate predictions and cost savings. The project will involve collecting and analyzing flight data, developing and testing machine learning models, and integrating the system into existing flight systems.Caleb Vanderpleog Resume and Academic Summary
Caleb Vanderpleog Resume and Academic SummaryCaleb VanderPloeg
Ìý
Caleb Vanderploeg is a mechanical engineer with experience in video editing, mechanical engineering, machining, and tutoring. He graduated from Arizona State University with a 3.9 GPA and a Bachelor's degree in mechanical engineering. His experience includes working as a video editor at WireBuzz LLC, a mechanical engineering intern at GoPro Inc., a machinist at Division Design, Engineer, Machine LLC, and a tutor at Varsity Tutoring. He has extensive experience with CAD software such as SolidWorks and Creo, as well as simulation software including ANSYS and Simulink. His academic projects include designing a wind turbine gearbox and a camera gimbal system. He also has experience performing finite elementNASA Aviary Open-source software tool for optimizing next-generation aircraft...
NASA Aviary Open-source software tool for optimizing next-generation aircraft...Dr. PANKAJ DHUSSA
Ìý
NASA
National Aeronautics and Space Administration
NASA Aviary
Open-source software tool for optimizing next-generation aircraft designs
By
Dr. Pankaj Dhussa Resume July 2015
Resume July 2015Scott Nichol
Ìý
This document summarizes the experience of an experienced software engineer with over 25 years of experience leading teams and developing complex web applications. Some key experiences include leading the development of a data-driven website for a major defense contractor using Agile methodologies and .NET, and developing command and control software for various government missions. He has extensive experience developing graphical user interfaces and real-time embedded systems in C/C++.Future Deep Strike Aircraft Thor Design Study Stage 1.pdf
Future Deep Strike Aircraft Thor Design Study Stage 1.pdfGeoffrey Wardle. MSc. MSc. Snr.MAIAA
Ìý
This is Stage one of my Future Deep Strike Aircraft project to develop a replacement for the FB-111 / F-111F / F-15E and B-1B. This stage covers requirements and threats. Stage 2 will cover Design Studies, and the CCA Wingman.Symvionics general overview 
Symvionics general overview Michael Andrew Barba
Ìý
Symvionics is an engineering and technical services company that has been in business for over 24 years. It provides a range of services including systems engineering, software engineering, hardware engineering, modeling and simulation, training systems, and flight test engineering. Symvionics has a diverse customer base that includes various branches of the military as well as NASA, commercial companies, and prime contractors. It prides itself on proven performance, a breadth of experience across contracts, and a commitment to customer satisfaction.Marumo_Resume(Mechanical Interior designer)
Marumo_Resume(Mechanical Interior designer)Kagisano Marumo
Ìý
Kagisano Marumo has over 4 years of experience as a mechanical designer for aircraft interiors. He has designed mechanical installations, tooling, and fixtures and prepared engineering drawings. He also has experience performing maintenance on aircraft as an Aircraft Maintenance Engineer and has a mechanical engineering degree specializing in aerospace.Garett Williams' Resume 5
Garett Williams' Resume 5Garett Williams
Ìý
Garett Williams has experience in aerospace engineering, audio engineering, and research. He has a Bachelor's degree in Aerospace Engineering from Georgia Tech where he was on the Dean's List. His professional experience includes working at Delta Air Lines in propulsion engineering support and at Triangle Sound Studios in audio engineering. He has also conducted research at Georgia Tech's Air Transportation Laboratory and class projects involving engineering design.resume-6
resume-6Ashraf Farag
Ìý
Ashraf Farag is an engineering manager with over 20 years of experience in the automotive industries. He currently manages a group of 17 engineers at Navistar responsible for designing engine cooling, HVAC, and emissions systems. Previously, he held various engineering roles at Delphi Automotive and Visteon, where he specialized in HVAC system design and computational fluid dynamics simulations. Farag has a Ph.D. in Mechanical Engineering and an MBA, and has authored several publications and patents over his career.Embedded Software Engineer
Embedded Software EngineerVasu Patel
Ìý
Vasu Patel is seeking an embedded software engineering position where he can utilize his skills in C, Trace32 Lauterbach, Labview, MATLAB, Simulink. He has over 5 years of experience in automotive software integration, testing, and validation. Some of his responsibilities include verifying and validating engine application software, testing flash files using Trace32, HIL testing using dSpace, and software integration testing. He has a Master's in Embedded Software Engineering from Gannon University with a GPA of 3.88 and a Bachelor's in Electronics and Communication from Sitarambhai Institute of Technology with a GPA of 3.66.Embedded Software Engineer
Embedded Software EngineerVasu Patel
Ìý
Vasu Patel is seeking an embedded software engineering position where he can utilize his skills in C, Trace32 Lauterbach, Labview, MATLAB, Simulink. He has over 5 years of experience as a Software Integration Engineer developing engine application software in C and validating software using tools like CANape, dSpace, and Trace32 debugger. He has a Master's in Embedded Software Engineering from Gannon University where he developed projects in embedded C, VHDL, LabView and FPGA.K Chandrasekaran
K ChandrasekaranChandru Sekaran
Ìý
This document provides a summary of Chandrasekaran K's experience and qualifications. He has over 14 years of experience in project management, software development, and data science roles in the aerospace domain. Currently he works as a technology specialist and data scientist at Honeywell, where he performs data analysis, machine learning, and system validation. He has led several projects and teams, and has experience developing certified software for avionics.mehlam_Resume
mehlam_ResumeMehlam Jupiterwala
Ìý
- Mehlam Jupiterwala has a Master's in Mechanical Engineering from Stony Brook University with a focus on thermal fluid science (CFD). They have experience designing nozzles, ducts, combustion processes, engine cooling/exhaust systems, and working on component and system level design. They are proficient in C, Fortran, CAD, and CFD software like ANSYS and COMSOL.Ashwin_L&T
Ashwin_L&TAshwin Nair
Ìý
This document provides a summary of Ashwin Sasikumar's experience as a Mechanical Design Engineer, including over 5 years working on projects involving wind turbines, oil rig equipment, valves, and more. It outlines his skillset which includes CAD tools, PLM, DFMEA, and Microsoft Office. Significant accomplishments highlighted include developing innovative solutions to speed up production and increase safety. Professional experience is detailed working for Larsen & Toubro Technology Services on projects involving pipe handling equipment, tools for wind turbine components, and the design of converter bases and nacelle structures.Dhananjay_Mishra
Dhananjay_MishraDhananjay Mishra
Ìý
Dhananjay Mishra is seeking a challenging career where he can utilize his aerospace engineering skills. He has a Bachelor of Technology degree in Aerospace Engineering from the University of Petroleum and Energy Studies with a focus on avionics. His academic and project experience includes developing an inertial navigation system with GPS integration using MATLAB, designing a matched filter for radar simulation, conducting airfoil curvature analysis in CATIA, and performing structural analysis projects in ANSYS. He has skills in CAD software like CATIA and SOLIDWORKS as well as FEA tools like ANSYS, Nastran, and Patran. He is proficient in programming languages like C and C++ and seeks to relocate for new opportunities.Manuel_Olivares_Resume_LinkedIn_2016
- 1. Manuel Olivares olivares.manny@gmail.com Education Bachelor of Science, Aerospace Engineering Embry-Riddle Aeronautical University, Daytona Beach, FL Minors: Mathematics and Psychology CGPA: 3.32/4.00 Completed: May 2008 Skills  Dassault Systèmes CATIA CAD software – 5 years of experience  Siemens NX CAD software – 3 years of experience  Dassault Systèmes ENOVIA PLM and Siemens Teamcenter PLM software experience  CATIA and NX integration with Phoenix Integration ModelCenter software for multidisciplinary trade studies Employment History Northrop Grumman Corporation, Aerospace Systems Aeronautical Engineer – Configuration Design and Integration Active Secret Government Security Clearance • Served as aircraft configuration lead in the Multidisciplinary Design Analysis and Optimization lab leading training workshops and coordinating with other disciplines such as propulsion to ensure current designs met their requirements • Functioned as a mentor to new hires, teaching them about applying configuration methods and showing them how to use CAD software for air vehicle design • Supported unmanned aerial vehicle program by modifying the outer mold line, determining optimal placement of external aircraft systems, creating multiple fairing concepts for external components, analyzing the existing engine inlet duct and updating various carrier suitability technical drawings to provide accurate support information, all using CATIA software • Effectively used configuration techniques to manipulate notional future aircraft layouts, payloads, and propulsion systems into suitable arrangements to meet program requirements • Updated designated air vehicle zones to reflect the latest assemblies for multiple configurations of the F/A-18 and EA-18G aircraft in NX and Teamcenter to provide up-to-date information for future systems integration • Supported the survivability team by conducting analysis of the stealth capabilities of an aircraft outer mold line using NX software and modified the model for computational fluid dynamics testing • Assisted a conformal fuel tank design effort for an air vehicle, collaborating on the design and evaluating the integration of each subsystem including the fuel system, electrical system and structure • Supported the mechanical ground systems engineering group in the James Webb Space Telescope program by designing test equipment for various components in both the optical telescope element and sunshield, delivering detailed technical drawings using CATIA software for manufacturing and testing after conducting multiple design reviews for evaluation of these designs • Designed and created a production quality loft for a sensor pod to be integrated with an air vehicle which met requirements for structural clearances and aerodynamic flow using CATIA software • Created multiple, robust, parametric NX aircraft models based on existing parametric and non-parametric CATIA aircraft models for trade study analysis and evaluation for a next-generation fighter program El Segundo, CA September 2008 – Present