Ppt Acceleration
Download as PPT, PDF27 likes34,371 views
Acceleration is the rate of change of velocity, meaning how quickly an object's speed or direction changes over time. It can be positive if an object speeds up, or negative if it slows down or changes direction. Acceleration is calculated by taking the change in velocity and dividing by the time elapsed, using the formula a=(Vf - Vi)/t, where a is acceleration, Vf is final velocity, Vi is initial velocity, and t is time.
1 of 9
Downloaded 1,579 times
Recommended
Acceleration
Accelerationtifcali
Ìý
Acceleration is the rate of change of an object's velocity. An object accelerates any time its speed or direction changes. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Acceleration is calculated by dividing the change in velocity by the time interval over the change occurred. Amusement park rides like rollercoasters produce high speeds and accelerations through steep drops and loops that accelerate riders via gravity, as well as sharp turns that accelerate riders towards the sides of cars.Waves (Grade 7, Quarter 3) Suggested Guide for Discussion
Waves (Grade 7, Quarter 3) Suggested Guide for DiscussionRachel Espino
Ìý
A suggested powerpoint presentation guide for discussion for Gr.7 teachers on the characteristics and categories of waves. It also includes a simple quiz (under knowledge category) as an assessmentImpulse and momentum(physics)
Impulse and momentum(physics)Nikol Cervas
Ìý
Linear Momentum or simply Momentum is the product of the mass and velocity of an object.
Impulse = Change in velocityModule 1- -describing-motion
Module 1- -describing-motionDee Bayn
Ìý
The document discusses key concepts of motion including distance, displacement, speed, velocity, and acceleration. It defines distance as the total length covered by a moving object, while displacement includes both the length and direction of motion. Speed refers to how fast an object moves over a period of time, while velocity includes both speed and direction. Acceleration is defined as the rate of change of velocity over time. Examples are provided to demonstrate calculating speed, velocity, and acceleration using the appropriate formulas. Different types of motion graphs are also introduced.Speed and velocity
Speed and velocityMakati Science High School
Ìý
Speed refers to how fast an object moves over a period of time, while velocity also considers the direction of motion. When describing storms, forecasters provide both the speed and direction it is moving, as well as the circular speed of the winds. The circular wind speed determines the storm's strength. Instantaneous speed refers to an object's speed at a single moment, while average speed considers the total distance and time over multiple moments. Motion is considered constant if the instantaneous speed remains the same over time.Phy 7 velocity and acceleration ppt
Phy 7 velocity and acceleration pptyusintani
Ìý
This document provides examples of calculating speed, velocity, acceleration, and deceleration using formulas involving distance, time, and change in velocity. It defines key terms like speed, velocity, and acceleration. Examples include calculating the speed of a car accelerating from 0 to 1609.36m in 25.9 seconds and decelerating from 60 mph to a stop over 6 seconds. Graphs of velocity over time are also presented and examples are given of interpreting the graphs to determine acceleration, deceleration, and distance traveled.Speed,velocity,acceleration
Speed,velocity,accelerationGrover Cleveland Middle School
Ìý
The document discusses key concepts related to motion including speed, velocity, acceleration, and frames of reference. It defines speed as distance traveled over time, velocity as including both speed and direction making it a vector quantity, and acceleration as how velocity changes over time either in magnitude or direction. Examples are provided to demonstrate calculating speed, velocity, and acceleration using formulas.Graph of The Motion
Graph of The Motionitutor
Ìý
This document discusses position vs. time graphs and how they can be used to represent motion. It explains that position is plotted on the y-axis and time on the x-axis. A straight line on the graph indicates constant speed, and the steeper the line, the faster the speed. The slope of the line equals speed, as it represents the ratio of change in position over change in time. Position vs. time graphs and their analysis can provide speed information without direct measurement.Distance and displacement
Distance and displacementMakati Science High School
Ìý
The document discusses the differences between distance and displacement. Distance refers to the total length of the path traveled, while displacement refers to the straight line distance between the starting and ending points. Displacement can be zero if the ending point is the same as the starting point, while distance traveled would still be greater than zero in this case. Both distance and displacement would be zero if an object returns to its original starting point.Objects in motion - 01 Distance and displacement
Objects in motion - 01 Distance and displacementIan Anderson
Ìý
This document defines and distinguishes between distance, displacement, and position-time graphs. It explains that distance is a scalar quantity that measures how far an object travels, while displacement is a vector quantity that measures the net change in position including direction. Position-time graphs can be used to determine an object's displacement and speed over time by plotting its position. The document provides examples comparing distance and displacement using a treasure hunt scenario and position-time graphs. Definitions and examples are included to illustrate these core physics concepts.Unit 28 - Heat And Temperature
Unit 28 - Heat And TemperatureOlympus High School - Jeff Taylor
Ìý
Temperature is a measure of the average kinetic energy of particles, with higher temperatures indicating faster particle motion. There are three main temperature scales: Fahrenheit, Celsius, and Kelvin. Fahrenheit and Celsius are used to measure temperatures experienced in daily life, while Kelvin is used for scientific purposes since it does not have negative values. Heat is transferred between objects through conduction, convection, and radiation. Conduction requires direct contact, convection occurs through fluid movement, and radiation transfers heat via electromagnetic waves.Sound grade 7
Sound grade 7mae2388
Ìý
Sound is a mechanical wave that requires a medium to travel. It is produced when an object vibrates, exerting a force on the surrounding air or medium. The loudness of a sound is measured in decibels, with louder sounds having higher amplitudes. Sound travels fastest through materials with high density, as the closer molecules can transfer energy more quickly through collisions. The human ear can detect sounds from 20-20,000 Hz but some animals can hear ultrasonic or infrasonic waves outside this range.Speed and velocity
Speed and velocitymrrayner
Ìý
The document discusses key concepts related to speed, velocity, distance, and time. It provides definitions of speed, distance, displacement, velocity, and average and instantaneous speed. Examples are given to illustrate the difference between distance and displacement. Graphs showing variations in distance and velocity over time are presented, and the relationships between distance, time, speed, velocity, and their equations are summarized in a table.Force and Motion Review ppt
Force and Motion Review pptcrautry
Ìý
This document provides an overview of key concepts related to force and motion, including definitions and formulas. It defines a force as a push or pull and notes they have both size and direction. It explains net forces result from combining multiple forces and discusses balanced and unbalanced forces. Key terms like motion, speed, velocity, acceleration, inertia, and Newton's Three Laws of Motion are defined. Formulas for speed, acceleration, weight, and examples of applications of the three laws are also presented.Velocity and acceleration
Velocity and accelerationjtwining
Ìý
Distance and time are important factors in describing motion, especially in running events. To win a race, runners must cover the distance in the shortest time. Speed is the distance traveled per unit of time and is important for describing motion, along with other factors like average and instantaneous speed. Acceleration is the rate of change of velocity and can be positive if an object is speeding up or negative if slowing down.WORK POWER AND ENERGY
WORK POWER AND ENERGYBernard Cid
Ìý
1) Work is defined as the product of the net force acting on a body and the distance moved in the direction of the force. The SI unit for work is the joule.
2) Power is defined as the rate at which work is done. It is measured in watts, which are equal to one joule per second.
3) There are two main types of energy: kinetic energy, which is the energy of motion, and potential energy, which is stored energy due to an object's position or composition. The SI unit for both is the joule. According to the law of conservation of energy, the total energy in an isolated system remains constant.Work Grade 8
Work Grade 8Elgerjegz Balderas
Ìý
Work is defined as the product of the applied force and the distance moved in the direction of the force. Work is done when a force causes an object to move, such as a girl pushing a chair or a waiter carrying a tray. Work can be calculated using the formula: Work (W) = Force (F) x Distance (d). Work is a method of transferring energy and doing work can increase the kinetic energy of an object. Kinetic energy is the energy of motion and is calculated using the formula: Kinetic Energy = 1/2 x Mass x Velocity^2. Potential energy is the energy of an object due to its position or state, such as the energy stored when an object is raised above the groundSpeed, Velocity and Acceleration
Speed, Velocity and AccelerationJerome Bigael
Ìý
This document defines and explains key concepts in kinematics including speed, velocity, and acceleration. It provides the following definitions:
- Speed is a measure of how fast a body moves and is a scalar quantity. There are two types - average and instantaneous speed.
- Velocity is a measure of both speed and direction of motion, making it a vector quantity. Average and instantaneous velocity are also defined.
- Acceleration is a change in velocity over time. It is a vector quantity measured in meters/second squared. Positive acceleration means speeding up while negative acceleration means slowing down.Motion in one dimension
Motion in one dimensionPIC
Ìý
1) The document discusses motion in one dimension, including definitions of terms like distance, displacement, speed, velocity, average speed, instantaneous speed, and acceleration.
2) Formulas for calculating speed, velocity, and acceleration are provided along with examples of applying the formulas to problems involving cars, planes, skateboarders, and sailboats.
3) Review questions are included to test understanding of key concepts like the difference between speed and velocity, and the relationship between changes in velocity and acceleration.Motion graphs-speed, velocity and acceleration graphs
Motion graphs-speed, velocity and acceleration graphsSmart Exam Resources
Ìý
Learn about various motion graphs through interesting graphics.This ppt also includes questions from past papers.It is ideal for educators and students alike who can learn the concepts and their application at the ame time.Science 7 - Describing Motion
Science 7 - Describing MotionMerra Mae Ramos
Ìý
This document defines and explains key concepts related to motion, including:
- Motion is defined as a change in position over time. A point of reference is used to measure an object's changing position.
- Displacement refers to the straight line distance and direction between two positions, while distance is the total path traveled.
- Speed is defined as distance divided by time and can be measured in units like km/h or m/s. Speed with direction is called velocity.
- Instantaneous speed is an object's speed at a moment in time, which may vary, while average speed represents the speed over the entire journey. Constant speed means the instantaneous speed does not change.
- AForce & Motion
Force & MotionJoan Shinkle
Ìý
This document discusses key concepts around motion and forces including:
1) It defines speed, velocity, and the difference between the two.
2) It explains that unbalanced forces cause changes in an object's velocity or acceleration, while balanced forces do not cause changes.
3) It describes different types of friction including static, sliding, rolling, and fluid friction and factors that affect friction.Forces gr.7
Forces gr.7Ruba Salah
Ìý
Mass is the amount of matter in an object and is measured in grams. A force can change the position, speed, direction, or shape of an object. Weight is the pull of gravity on an object and is measured in Newtons. There are two types of forces - contact forces which act when objects touch, and non-contact forces which act over a distance like magnetic or gravitational forces. Balanced forces cancel each other out while unbalanced forces cause changes in speed or direction.Speed, Velocity And Acceleration
Speed, Velocity And Accelerationsaviourbest
Ìý
The document defines and explains key kinematics concepts including speed, velocity, acceleration, uniform acceleration, and linear motion. Speed is distance over time while velocity includes direction and is a vector. Acceleration is the rate of change of velocity, calculated as the change in velocity over time. Acceleration is uniform if the rate of change is constant, while non-uniform acceleration means the rate varies over time. Velocity decreases in deceleration.Types of forces
Types of forcesKunal Yadav
Ìý
This document discusses different types of forces. It begins by explaining that moving objects are said to be in motion. It then states that a push or pull acting on an object is called a force. The document goes on to list and briefly describe four main types of forces: gravitational force, magnetic force, nuclear force, and muscular force.SCIENCE7: Elements and Compounds
SCIENCE7: Elements and CompoundsChristian Adriano-ursabia
Ìý
This document provides information about elements and compounds. It begins by defining pure substances as either elements or compounds. Elements contain only one type of atom, while compounds contain two or more different types of atoms bonded together. Examples of common elements and their symbols are provided, along with their locations on the periodic table. Elements are also classified as metals, nonmetals, and metalloids. Examples of important compounds like water and their chemical formulas are also given. Students are then asked to classify substances as elements or compounds and answer multiple choice questions to assess their understanding of the key concepts. Momentum
MomentumGrover Cleveland Middle School
Ìý
Momentum is a characteristic of moving objects related to its mass and velocity. It is calculated by multiplying mass and velocity, with units of kg*m/s. An object's momentum is in the direction of its velocity, and greater momentum means it is harder to stop the object. Both greater mass and velocity result in higher momentum. The total momentum in a system is conserved during interactions and collisions according to the law of conservation of momentum.Waves ppt.
Waves ppt.hlayala
Ìý
This document defines waves and classifies them according to their medium and particle motion. Waves transfer energy through a medium without transferring matter. They are classified as electromagnetic waves, which can travel through empty space, and mechanical waves, which require a medium. Mechanical waves are further divided into transverse waves, where particles move perpendicular to the wave, and longitudinal waves, where particles move parallel. The document also discusses wave characteristics like frequency, period, velocity, and behaviors such as reflection, refraction, diffraction, interference, polarization, and resonance.SPEED VELOCITY AND ACCELERATION.pptx
SPEED VELOCITY AND ACCELERATION.pptxLeyCanasa
Ìý
This document discusses key concepts related to motion, including speed, velocity, acceleration, and how to calculate them. It defines speed as distance over time, velocity as including both speed and direction making it a vector, and acceleration as the rate of change of velocity. Examples are provided to distinguish between speed and velocity, and how acceleration can occur from changes in speed, direction, or both. Frames of reference, displacement, graphs of motion, and real-world examples of calculating acceleration are also summarized.ACCELERATION.pptx
ACCELERATION.pptxAllenIbaez
Ìý
Acceleration is defined as the rate of change of an object's velocity. An object accelerates when its speed changes, its direction changes, or both change. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Even if speed stays the same, an object accelerates when its direction changes, such as when rounding a curve.More Related Content
What's hot (20)
Distance and displacement
Distance and displacementMakati Science High School
Ìý
The document discusses the differences between distance and displacement. Distance refers to the total length of the path traveled, while displacement refers to the straight line distance between the starting and ending points. Displacement can be zero if the ending point is the same as the starting point, while distance traveled would still be greater than zero in this case. Both distance and displacement would be zero if an object returns to its original starting point.Objects in motion - 01 Distance and displacement
Objects in motion - 01 Distance and displacementIan Anderson
Ìý
This document defines and distinguishes between distance, displacement, and position-time graphs. It explains that distance is a scalar quantity that measures how far an object travels, while displacement is a vector quantity that measures the net change in position including direction. Position-time graphs can be used to determine an object's displacement and speed over time by plotting its position. The document provides examples comparing distance and displacement using a treasure hunt scenario and position-time graphs. Definitions and examples are included to illustrate these core physics concepts.Unit 28 - Heat And Temperature
Unit 28 - Heat And TemperatureOlympus High School - Jeff Taylor
Ìý
Temperature is a measure of the average kinetic energy of particles, with higher temperatures indicating faster particle motion. There are three main temperature scales: Fahrenheit, Celsius, and Kelvin. Fahrenheit and Celsius are used to measure temperatures experienced in daily life, while Kelvin is used for scientific purposes since it does not have negative values. Heat is transferred between objects through conduction, convection, and radiation. Conduction requires direct contact, convection occurs through fluid movement, and radiation transfers heat via electromagnetic waves.Sound grade 7
Sound grade 7mae2388
Ìý
Sound is a mechanical wave that requires a medium to travel. It is produced when an object vibrates, exerting a force on the surrounding air or medium. The loudness of a sound is measured in decibels, with louder sounds having higher amplitudes. Sound travels fastest through materials with high density, as the closer molecules can transfer energy more quickly through collisions. The human ear can detect sounds from 20-20,000 Hz but some animals can hear ultrasonic or infrasonic waves outside this range.Speed and velocity
Speed and velocitymrrayner
Ìý
The document discusses key concepts related to speed, velocity, distance, and time. It provides definitions of speed, distance, displacement, velocity, and average and instantaneous speed. Examples are given to illustrate the difference between distance and displacement. Graphs showing variations in distance and velocity over time are presented, and the relationships between distance, time, speed, velocity, and their equations are summarized in a table.Force and Motion Review ppt
Force and Motion Review pptcrautry
Ìý
This document provides an overview of key concepts related to force and motion, including definitions and formulas. It defines a force as a push or pull and notes they have both size and direction. It explains net forces result from combining multiple forces and discusses balanced and unbalanced forces. Key terms like motion, speed, velocity, acceleration, inertia, and Newton's Three Laws of Motion are defined. Formulas for speed, acceleration, weight, and examples of applications of the three laws are also presented.Velocity and acceleration
Velocity and accelerationjtwining
Ìý
Distance and time are important factors in describing motion, especially in running events. To win a race, runners must cover the distance in the shortest time. Speed is the distance traveled per unit of time and is important for describing motion, along with other factors like average and instantaneous speed. Acceleration is the rate of change of velocity and can be positive if an object is speeding up or negative if slowing down.WORK POWER AND ENERGY
WORK POWER AND ENERGYBernard Cid
Ìý
1) Work is defined as the product of the net force acting on a body and the distance moved in the direction of the force. The SI unit for work is the joule.
2) Power is defined as the rate at which work is done. It is measured in watts, which are equal to one joule per second.
3) There are two main types of energy: kinetic energy, which is the energy of motion, and potential energy, which is stored energy due to an object's position or composition. The SI unit for both is the joule. According to the law of conservation of energy, the total energy in an isolated system remains constant.Work Grade 8
Work Grade 8Elgerjegz Balderas
Ìý
Work is defined as the product of the applied force and the distance moved in the direction of the force. Work is done when a force causes an object to move, such as a girl pushing a chair or a waiter carrying a tray. Work can be calculated using the formula: Work (W) = Force (F) x Distance (d). Work is a method of transferring energy and doing work can increase the kinetic energy of an object. Kinetic energy is the energy of motion and is calculated using the formula: Kinetic Energy = 1/2 x Mass x Velocity^2. Potential energy is the energy of an object due to its position or state, such as the energy stored when an object is raised above the groundSpeed, Velocity and Acceleration
Speed, Velocity and AccelerationJerome Bigael
Ìý
This document defines and explains key concepts in kinematics including speed, velocity, and acceleration. It provides the following definitions:
- Speed is a measure of how fast a body moves and is a scalar quantity. There are two types - average and instantaneous speed.
- Velocity is a measure of both speed and direction of motion, making it a vector quantity. Average and instantaneous velocity are also defined.
- Acceleration is a change in velocity over time. It is a vector quantity measured in meters/second squared. Positive acceleration means speeding up while negative acceleration means slowing down.Motion in one dimension
Motion in one dimensionPIC
Ìý
1) The document discusses motion in one dimension, including definitions of terms like distance, displacement, speed, velocity, average speed, instantaneous speed, and acceleration.
2) Formulas for calculating speed, velocity, and acceleration are provided along with examples of applying the formulas to problems involving cars, planes, skateboarders, and sailboats.
3) Review questions are included to test understanding of key concepts like the difference between speed and velocity, and the relationship between changes in velocity and acceleration.Motion graphs-speed, velocity and acceleration graphs
Motion graphs-speed, velocity and acceleration graphsSmart Exam Resources
Ìý
Learn about various motion graphs through interesting graphics.This ppt also includes questions from past papers.It is ideal for educators and students alike who can learn the concepts and their application at the ame time.Science 7 - Describing Motion
Science 7 - Describing MotionMerra Mae Ramos
Ìý
This document defines and explains key concepts related to motion, including:
- Motion is defined as a change in position over time. A point of reference is used to measure an object's changing position.
- Displacement refers to the straight line distance and direction between two positions, while distance is the total path traveled.
- Speed is defined as distance divided by time and can be measured in units like km/h or m/s. Speed with direction is called velocity.
- Instantaneous speed is an object's speed at a moment in time, which may vary, while average speed represents the speed over the entire journey. Constant speed means the instantaneous speed does not change.
- AForce & Motion
Force & MotionJoan Shinkle
Ìý
This document discusses key concepts around motion and forces including:
1) It defines speed, velocity, and the difference between the two.
2) It explains that unbalanced forces cause changes in an object's velocity or acceleration, while balanced forces do not cause changes.
3) It describes different types of friction including static, sliding, rolling, and fluid friction and factors that affect friction.Forces gr.7
Forces gr.7Ruba Salah
Ìý
Mass is the amount of matter in an object and is measured in grams. A force can change the position, speed, direction, or shape of an object. Weight is the pull of gravity on an object and is measured in Newtons. There are two types of forces - contact forces which act when objects touch, and non-contact forces which act over a distance like magnetic or gravitational forces. Balanced forces cancel each other out while unbalanced forces cause changes in speed or direction.Speed, Velocity And Acceleration
Speed, Velocity And Accelerationsaviourbest
Ìý
The document defines and explains key kinematics concepts including speed, velocity, acceleration, uniform acceleration, and linear motion. Speed is distance over time while velocity includes direction and is a vector. Acceleration is the rate of change of velocity, calculated as the change in velocity over time. Acceleration is uniform if the rate of change is constant, while non-uniform acceleration means the rate varies over time. Velocity decreases in deceleration.Types of forces
Types of forcesKunal Yadav
Ìý
This document discusses different types of forces. It begins by explaining that moving objects are said to be in motion. It then states that a push or pull acting on an object is called a force. The document goes on to list and briefly describe four main types of forces: gravitational force, magnetic force, nuclear force, and muscular force.SCIENCE7: Elements and Compounds
SCIENCE7: Elements and CompoundsChristian Adriano-ursabia
Ìý
This document provides information about elements and compounds. It begins by defining pure substances as either elements or compounds. Elements contain only one type of atom, while compounds contain two or more different types of atoms bonded together. Examples of common elements and their symbols are provided, along with their locations on the periodic table. Elements are also classified as metals, nonmetals, and metalloids. Examples of important compounds like water and their chemical formulas are also given. Students are then asked to classify substances as elements or compounds and answer multiple choice questions to assess their understanding of the key concepts. Momentum
MomentumGrover Cleveland Middle School
Ìý
Momentum is a characteristic of moving objects related to its mass and velocity. It is calculated by multiplying mass and velocity, with units of kg*m/s. An object's momentum is in the direction of its velocity, and greater momentum means it is harder to stop the object. Both greater mass and velocity result in higher momentum. The total momentum in a system is conserved during interactions and collisions according to the law of conservation of momentum.Waves ppt.
Waves ppt.hlayala
Ìý
This document defines waves and classifies them according to their medium and particle motion. Waves transfer energy through a medium without transferring matter. They are classified as electromagnetic waves, which can travel through empty space, and mechanical waves, which require a medium. Mechanical waves are further divided into transverse waves, where particles move perpendicular to the wave, and longitudinal waves, where particles move parallel. The document also discusses wave characteristics like frequency, period, velocity, and behaviors such as reflection, refraction, diffraction, interference, polarization, and resonance.Similar to Ppt Acceleration (20)
SPEED VELOCITY AND ACCELERATION.pptx
SPEED VELOCITY AND ACCELERATION.pptxLeyCanasa
Ìý
This document discusses key concepts related to motion, including speed, velocity, acceleration, and how to calculate them. It defines speed as distance over time, velocity as including both speed and direction making it a vector, and acceleration as the rate of change of velocity. Examples are provided to distinguish between speed and velocity, and how acceleration can occur from changes in speed, direction, or both. Frames of reference, displacement, graphs of motion, and real-world examples of calculating acceleration are also summarized.ACCELERATION.pptx
ACCELERATION.pptxAllenIbaez
Ìý
Acceleration is defined as the rate of change of an object's velocity. An object accelerates when its speed changes, its direction changes, or both change. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Even if speed stays the same, an object accelerates when its direction changes, such as when rounding a curve.ACCELERATION.pptx
ACCELERATION.pptxAllenIbaez
Ìý
Acceleration is defined as the rate of change of an object's velocity. An object accelerates when its speed changes, its direction changes, or both change. Positive acceleration occurs when speed increases, while negative acceleration occurs when speed decreases. Even if speed stays the same, an object accelerates when its direction changes, such as when rounding a curve.Motion Notes PPT STUDENT KEY.pdf
Motion Notes PPT STUDENT KEY.pdfangelicasibul1
Ìý
The document discusses key concepts related to motion including distance, displacement, speed, velocity, acceleration, and free fall. It defines these terms and provides examples to illustrate them. For instance, it explains that displacement refers to how far an object is from its starting point, while distance describes the total length traveled. It also discusses that acceleration can change in different ways such as increasing or decreasing speed, changing direction, or altering both speed and direction simultaneously. Free fall acceleration on Earth is specified as 9.8 m/s2 due to gravity.PPT Position And Motion
PPT Position And Motionffiala
Ìý
Motion refers to an object changing its position over time. Distance is how far an object has moved, while displacement includes both distance and direction of motion. Speed is the distance traveled over a period of time. Velocity differs from speed in that it considers both distance and direction of motion. While an object's speed may remain constant, its velocity changes if its direction of motion changes.Stem notes topics 1 and 2
Stem notes topics 1 and 2Mr. Motuk
Ìý
This document provides information about motion and kinematics. It defines key terms like displacement, speed, velocity, acceleration, frames of reference, and describes the relationships between distance, time, speed, velocity, and acceleration using formulas and graphs. It also discusses one-dimensional and two-dimensional motion and how gravity affects vertically moving projectiles.
L2
L2DMS_physics
Ìý
1) The document discusses various concepts related to motion including speed, velocity, acceleration, and their relationships.
2) It defines key terms like speed, velocity, scalars, vectors, and acceleration and provides examples of how they apply to motion.
3) Examples are given of constant and changing velocity and acceleration in situations like a car moving in a straight line or circular motion.Acceleration
AccelerationBrandi
Ìý
1) Acceleration is the rate of change of velocity with time. It can be positive, indicating an increase in speed or change in direction, or negative, indicating a decrease in speed or change in direction.
2) A car accelerating from 60 mph to 90 mph in 3 seconds has an acceleration of 10 mph/sec. A car braking from 60 mph to a stop in 6 seconds has a negative acceleration of -10 mph/sec.
3) Falling objects near the Earth's surface accelerate at approximately 10 m/s2 due to gravity. Their velocity increases linearly with time until air resistance balances the gravitational force and the object reaches terminal velocity.Acceleration
AccelerationBrandi
Ìý
Each time you take a step or a vehicle changes speed or direction, it is experiencing acceleration. Acceleration is the rate of change of velocity over time and can be calculated as the change in velocity divided by the time elapsed. For example, a car accelerating from 60 mph to 90 mph in 3 seconds has an acceleration of 10 mph/s. Acceleration can be positive, like the car speeding up, or negative, like when braking and slowing down. Over time, the constant acceleration due to gravity causes objects in free fall to increase their velocity, gaining 10 m/s every second until air resistance balances the downward force.Acceleration by Sir Imat.pptx
Acceleration by Sir Imat.pptxReymartSupleo
Ìý
The document discusses acceleration, which is defined as the rate of change of velocity with time. It can be calculated as the change in velocity divided by the time taken. Acceleration is a vector quantity that indicates both magnitude and direction of change. Examples of uniformly accelerated motion include objects in free fall under gravity. Practice problems provide examples of calculating acceleration from changes in speed over time. Key concepts are that uniform motion involves equal changes in position over equal time intervals, while uniform acceleration produces equal changes in velocity over equal times.MOTION.pptx
MOTION.pptxjeromevital1
Ìý
After going through this module, you are expected to:
describe the motion of an object in terms of distance or displacement, speed or velocity and acceleration (S7FE-IIIa-1);
perform activities on speed, velocity and acceleration; and
compute for the speed, velocity and acceleration.
Uniformly Accelerated Motion (horizontally and Vertically)
Uniformly Accelerated Motion (horizontally and Vertically)SirajSirajNajmah
Ìý
Uniformly Accelerated Motion (horizontally and Vertically)Motion in a straigt line
Motion in a straigt lineEng Mghase
Ìý
This document discusses linear motion and key concepts related to motion including:
- Distance is how far an object has moved while displacement specifies both distance and direction.
- Speed is distance traveled over time but velocity includes both speed and direction of motion.
- Acceleration is the rate of change of velocity with time, while deceleration is a negative acceleration or slowing down.
- Graphs can show relationships between position, velocity, acceleration and time, with slope representing velocity or acceleration.
Unit 19 - Forces And Motion
Unit 19 - Forces And MotionOlympus High School - Jeff Taylor
Ìý
1. The document discusses key concepts of motion including velocity, acceleration, and forces. Velocity is defined as change in distance over change in time. Acceleration is defined as a change in velocity.
2. Examples are provided to illustrate positive and negative acceleration. Positive acceleration occurs when speed increases, such as a car speeding up, while negative acceleration occurs when speed decreases, such as slamming on the brakes.
3. Forces are described as necessary to cause any changes in an object's motion. Forces can create acceleration to change an object's velocity, either speeding it up or slowing it down.Unit 19 - Forces And Motion
Unit 19 - Forces And MotionOlympus High School - Jeff Taylor
Ìý
1. The document discusses key concepts of motion including velocity, acceleration, and forces. Velocity is defined as change in distance over change in time. Acceleration is defined as a change in velocity.
2. Examples are provided to illustrate positive and negative acceleration. Positive acceleration occurs when speed increases, such as a car speeding up, while negative acceleration occurs when speed decreases, such as slamming on the brakes.
3. Forces are described as necessary to cause any changes in an object's motion. Forces can create acceleration to change an object's velocity, either speeding it up or slowing it down.
Objects in motion - 03 Acceleration
Objects in motion - 03 AccelerationIan Anderson
Ìý
Acceleration is the rate of change of an object's speed over time. It can be calculated using the formula: acceleration = change in speed/change in time. Acceleration is measured in meters per second squared (m/s2). The slope of a speed-time graph directly corresponds to an object's acceleration - a steeper slope indicates higher acceleration. An object's acceleration can be determined by analyzing the slopes in its speed-time graph over different time periods.More from ffiala (20)
4.5 2014 bstdy essence being and consciousness
4.5 2014 bstdy essence being and consciousnessffiala
Ìý
The document outlines the day's objectives which are to explain concepts of consciousness, essence and Being, differentiate between Associative and Cognitive Awareness, and discuss Existential intelligence versus Existentialism. It then provides information on forms of consciousness including selective attention and examples of inattentional and change blindness. Finally, it discusses key concepts of Existentialism such as existence preceding essence and the absurdity of reality.4.1 2014 bstdy strategizing
4.1 2014 bstdy strategizingffiala
Ìý
The document outlines steps for creating a personal plan for success, including clarifying one's definition of success, identifying nine principles and three steps for success. It prompts the reader to write about their strengths, weaknesses, opportunities, threats, and core competencies, and to consider what they are capable of achieving with effort and how to monitor trends and relationships important to their success. The reader is then instructed to identify these factors and options in their brain studies journal.Physics Semester 1 Review and Tutorial
Physics Semester 1 Review and Tutorialffiala
Ìý
The document describes slides used in a tutorial that are color coded to indicate different types of problems. Red slides involve word problems, tan slides involve matching concepts, and olive slides involve reading data tables. Green slides involve graphing. It then provides examples of different physics problems and their solutions, involving concepts like displacement, velocity, acceleration, forces, and kinematics.Physics Semester 2 Review and Tutorial
Physics Semester 2 Review and Tutorialffiala
Ìý
The document provides information about color-coded slides used in an online physics tutorial. ºÝºÝߣs with different colored backgrounds relate to different physics concepts: red for word problems, tan for matching concepts, and olive for reading data tables. The document also includes example slides on these topics, as well as slides involving graphing. Additional slides provide physics equations, examples of calculating physics quantities like velocity and frequency, and graphs related to energy.Ppt example great america project
Ppt example great america projectffiala
Ìý
The document describes experiments conducted to analyze the motion of a roller coaster on its first drop hill. Two methods were used to measure acceleration, with the first method finding -7.1 m/s^2 and the second -4.9 m/s^2. Height was also measured two ways, with results of 49m and 35.87m respectively. Energy calculations did not match potential and kinetic energies. Forces were measured as 2.81Fg and an average of 2.52Fg from accelerometer data. Overall the data did not fully support hypotheses due to inconsistencies between methods.6 2012 ppt batfink energy review
6 2012 ppt batfink energy reviewffiala
Ìý
The document contains solutions to multiple physics problems involving energy transfers and transformations. It analyzes situations involving the Batallac car, Batfink, Karate, and a wrecking ball. Calculations are shown for gravitational potential energy, kinetic energy, velocity, time, force, power, and spring constant. Key terms like mass, displacement, gravity, energy, force, and power are defined and used in the calculations.1 2012 ppt semester 1 review and tutorial 2
1 2012 ppt semester 1 review and tutorial 2ffiala
Ìý
The document describes different colored slides used in a video. ºÝºÝߣs with red backgrounds involve word matching problems. ºÝºÝߣs with tan backgrounds involve concepts. ºÝºÝߣs with green backgrounds involve graphing. ºÝºÝߣs with olive backgrounds involve reading data tables.1 2012 ppt semester 1 review and tutorial 2
1 2012 ppt semester 1 review and tutorial 2ffiala
Ìý
The document describes slides used in a video that are color coded to indicate different types of problems or concepts. ºÝºÝߣs with red backgrounds involve word matching problems. ºÝºÝߣs with tan backgrounds involve concepts. ºÝºÝߣs with green backgrounds involve graphing. ºÝºÝߣs with olive backgrounds involve reading data tables. The document then provides examples of physics problems and solutions related to motion, forces, and other concepts.1 2012 ppt semester 1 review and tutorial 2
1 2012 ppt semester 1 review and tutorial 2ffiala
Ìý
The document describes slides used in a video that are color coded to indicate different types of problems or concepts. ºÝºÝߣs with red backgrounds involve word matching problems. ºÝºÝߣs with tan backgrounds involve concepts. ºÝºÝߣs with green backgrounds involve graphing. ºÝºÝߣs with olive backgrounds involve reading data tables. The document then provides examples of physics problems and solutions related to motion.1 2012 ppt semester 1 review and tutorial 2
1 2012 ppt semester 1 review and tutorial 2ffiala
Ìý
The document describes slides used in a video that are color coded to indicate different types of problems or concepts. ºÝºÝߣs with red backgrounds involve word matching problems. ºÝºÝߣs with tan backgrounds involve concepts. ºÝºÝߣs with green backgrounds involve graphing. ºÝºÝߣs with olive backgrounds involve reading data tables. The document then provides examples of physics problems and solutions related to motion.1 2012 ppt semester 1 data table review
1 2012 ppt semester 1 data table reviewffiala
Ìý
The document describes a video that uses color-coded slides to explain different concepts. ºÝºÝߣs with red backgrounds involve word matching problems. ºÝºÝߣs with tan backgrounds involve concepts. ºÝºÝߣs with green backgrounds involve graphing. ºÝºÝߣs with olive backgrounds involve reading data tables. The document also includes tables of position, velocity, and time data for multiple objects.1 2012 ppt semester 1 graphing review
1 2012 ppt semester 1 graphing reviewffiala
Ìý
The document describes a video presentation with slides of different colors that code different types of content:
- Red slides involve word matching problems.
- Tan slides involve concepts.
- Green slides involve graphing.
- Olive slides involve reading data tables.1 2012 ppt semester 1 matching review
1 2012 ppt semester 1 matching reviewffiala
Ìý
The document contains slides from a video lesson on physics concepts. The slides are color coded by topic: red for word problems, tan for concepts, green for graphing, olive for data tables. Key concepts defined include displacement, velocity, acceleration, inertia, force, and momentum. Graphing concepts like position, velocity, and acceleration graphs are presented for different motion scenarios. Force diagrams are matched to motion maps and used to predict kinematic graphs.1 2012 ppt semester 1 word problems review 
1 2012 ppt semester 1 word problems review ffiala
Ìý
The document describes a series of physics problems involving Dr. Fiala traveling or accelerating at constant rates. Different colored slides in a video correspond to different types of problems involving word matching, concepts, data tables, or graphing. The problems provide calculations for distance, time, velocity, acceleration, force, momentum, and more using kinematic equations and Newton's laws of motion.2012 ppt batfink projectile review
2012 ppt batfink projectile reviewffiala
Ìý
The document provides solutions to physics problems involving forces, acceleration, velocity, and time calculations. The first problem involves calculating the acceleration of a barrel pushed by an 85 N force over 12 m with 7 N of friction. The second calculates the final velocity of the barrel before falling off a cliff as 12 m/s. The third finds Batfink has 3.26 seconds to escape the barrel after falling from 52 m.2013 ppt batfink projectile review
2013 ppt batfink projectile reviewffiala
Ìý
The document contains step-by-step solutions to physics problems involving forces, acceleration, velocity, and time calculations. It analyzes the motion of a barrel containing Batfink as it is pushed off a cliff and falls. The solutions include drawing free body diagrams, calculating acceleration along the x-axis, final velocity before falling, maximum time for escape from the barrel, and final velocity upon hitting the ground. Key values like masses, forces, distances, and times are identified and used to solve the problems.10 2012 ppt force review
10 2012 ppt force reviewffiala
Ìý
The document provides examples of physics problems involving forces, kinematics, and free body diagrams. It includes solutions to calculating tensions in chains suspending a person, the acceleration and velocity of an object being pushed along a cliff, and determining the forces, velocities and displacements of moving carts. Diagrams illustrate the free body diagrams and graphs are used to represent motion over time.10 2012 ppt force review
10 2012 ppt force reviewffiala
Ìý
Batfink, weighing 50 kg, is placed in a 25 kg barrel. Hugo pushes the barrel with Batfink over 12 m before it falls off a cliff, accelerating at 1.1 m/s^2. The Hulk, weighing 355 kg, hangs from two chains attached to walls, with tensions of 2358 N and 2120 N in the chains. A 2.75 kg cart starting 6.2 m to the left of the reference point and traveling at 1.47 m/s for 4.63 seconds experiences a force of 0.908 N and ends up traveling 2.99 m.10 2012 ppt force review
10 2012 ppt force reviewffiala
Ìý
1) Batfink (50 kg) and a barrel (25 kg) experience a force of gravity (Fg) of -735 N when stationary. Hugo pushes the barrel with Batfink inside with 85 N over 12 m. The barrel's acceleration is calculated to be 1.1 m/s^2.
2) Tensions (T1, T2) are calculated in two chains suspending the Incredible Hulk (355 kg). T1 experiences a tension of 2358.2 N and T2 experiences 2500 N.
3) A cart (2.75 kg) starting at -6.2 m with a velocity of 1.47 m/s accelerating at 0.2013 ppt force review
2013 ppt force reviewffiala
Ìý
1) The document provides solutions to physics problems involving forces, velocities, accelerations, and displacements acting on objects with given masses. Force diagrams and calculations are shown.
2) One problem involves a barrel containing Batfink that is pushed along a cliff and its acceleration and final velocity before falling are calculated.
3) Another determines the tensions on chains suspending the Incredible Hulk, giving his mass and the angles and tension on one chain.Ppt Acceleration
- 1. Acceleration
- 2. What is Acceleration? Speed is the rate of change of position. Acceleration is the rate of change of velocity. What does that mean it has? HINT
- 3. Acceleration Hints! Because velocity includes speed and direction of an object, acceleration can be a change in: How fast the object is moving What direction the object is moving Acceleration occurs when an objects changes its speed or direction, or both!
- 4. Speeding up or Slowing down? When a car speeds up, that is POSITIVE ACCELERATION! When a car slows down, that is NEGATIVE ACCELERATION or DECELERATION!
- 5. Acceleration Formula Acceleration = Change in Velocity/Time a=(Final Velocity-Initial Velocity)/Time a=(V f -V i )/t
- 6. Positive Acceleration A motorcycle starts at rest and accelerates to 80 m/s in 20 seconds a=(V f -V i )/t = (80 m/s – 0 m/s) / 20s a= 4 m/s 2
- 8. Negative Acceleration/Deceleration A skateboarder moves in a straight line at 3 m/s and comes to a stop in 2 s. a=(V f -V i )/t = (0 m/s – 3 m/s)/2s a= -1.5 m/s 2