Resume - Sawyer Benavidez
1 like154 views
Sawyer Benavidez is seeking an entry-level position as a mechanical engineer with relevant work experience at TxDOT and UTPB. He graduated from the University of Texas of the Permian Basin with a 3.88 GPA in mechanical engineering. As a student, he tutored physics and engineering courses, assisted with engineering programs, and coordinated dual-credit courses. He has skills in Creo, MathCAD, LabVIEW, and Microsoft Office from coursework and design projects involving a piston, water well pump puller, and fuel delivery system.
1 of 1
Download to read offline
Recommended
HannahNoble_Resume_Sept_2016_Formatted
HannahNoble_Resume_Sept_2016_FormattedHannah Noble
Ìý
Hannah Noble is an electrical engineering student at the University of Michigan seeking internship opportunities. She has worked as an electrical engineering intern at Tetra Tech for over a year, taking on various projects including mapping power distribution and designing control systems. Noble also has experience as a grader, workshop leader, and on an underwater ROV design team. She maintains a 3.42 GPA and is involved with several honors societies and engineering organizations on campus.LINKEDINRESUME
LINKEDINRESUMEAaron Lowry
Ìý
Aaron M. Lowry is a student at the University of Maryland studying aerospace engineering. He is expected to graduate with a Bachelor of Science in May 2016. He has extensive technical experience including leading a team to design an autonomous hovercraft and managing the design of an engineering truss. He has also collaborated on projects to design load bearing beams and worked with aerospace circuitry and instrumentation. Additionally, he has work experience in residential construction and development through internships with Federal Homes and Cayenne Properties. He also tutors high school students in math and science. His skills include proficiency with MATLAB, C++, Autodesk Inventor, Pro-Engineer, and Microsoft Office.Resume-Smith_Fedako updated
Resume-Smith_Fedako updatedSmith Fedako
Ìý
Smith Fedako is seeking a challenging position where they can utilize their drive, knowledge, and skills. They have a B.S. in Materials Science and Engineering from The Ohio State University and have experience leading senior design projects involving computational modeling of metallic glasses and programming an energy-efficient vehicle. Their qualifications include proficiency with MATLAB, Microsoft Office, SolidWorks, and relevant materials science coursework focusing on metallurgy.Lane_Brammer_Resume
Lane_Brammer_ResumeLane Brammer
Ìý
Lane Brammer is an electrical engineering student at Oregon State University expected to graduate in March 2017 with a 3.84 GPA. He has relevant internship experience at Vestas American Wind Technology and Portland General Electric, where he worked on electrical problems with wind turbines and implemented capital projects. Additionally, he has skills in areas like power systems, smart grids, electric vehicles, failure forecasting, and software like AutoCAD, Microsoft Office, and turbine monitoring suites. He has also held leadership roles on the Solar Vehicle Team and as an executive dean for his fraternity.Benjamin J Barry Resume
Benjamin J Barry ResumeBen Barry
Ìý
Benjamin J Barry is a 2016 graduate of Colorado State University-Pueblo with a Bachelor of Science degree in Mechatronic Engineering and a minor in Mathematics. He has experience leading engineering organizations like ASME and IEEE and has mentored students. His contact information and areas of proficiency are included.Resume
ResumeTomás Martinez
Ìý
Tomás Martinez has over 5 years of experience as an electrical designer, working on 27 construction projects for Sparling including city halls, convention centers, hospitals, and zoos. He is proficient in AutoCAD, Revit, and other design software. Martinez earned a Bachelor's degree in Electrical Engineering from the University of Washington with a 3.7 GPA. He has experience managing multiple projects simultaneously, performing short circuit analysis, and coordinating with other designers. In previous roles, Martinez researched renewable energy and developed educational programs.Mhd Ghiyath Nabolsi G
Mhd Ghiyath Nabolsi GGhiyath Nabolsi
Ìý
This document is a resume for MHD Ghiyath Nabolsi. It summarizes his objective of seeking an entry-level electrical engineering position to develop his skills. It then outlines his education at Prairie View A&M University where he studied electrical engineering and lists relevant coursework. Finally, it summarizes his professional experience including senior design projects, technician work, and management experience and notes academic achievements and affiliations.Professional Resume Alex Moushegian
Professional Resume Alex MoushegianAlex Moushegian
Ìý
This document is a resume for Alex Armand Moushegian, an electrical engineering student at the University of Arkansas pursuing a B.S. in Electrical Engineering and intending to get a full-time position in power or application engineering. It outlines his education, qualifications, professional experience including an internship at FutureFuel Chemical Company and undergraduate research assistantship, and projects including a senior design project for a distribution substation and a buck converter design.Engineering Resume
Engineering ResumeAmanda Elliott
Ìý
Amanda Elliott is a junior at the University of South Carolina studying electrical engineering with a 3.78 GPA. She has received scholarships from Woodrow Wilson and the National Academy for Nuclear Training. Her experience includes an internship at Surry Nuclear Power Station where she assisted with various electrical engineering projects. She also tutors students in calculus, algorithms, signals and systems, and circuits. Her leadership roles include president of Eta Kappa Nu honor society and vice president of the Peer Advisory Council for her department.Resume Revised Feb, 29 2016
Resume Revised Feb, 29 2016Jake Cordray
Ìý
Jake Cordray is seeking an entry-level position as a mechanical engineer. He has a Bachelor of Science in Mechanical Engineering from the University of Toledo and has held internships with Colorado Springs Utilities and Ludlow Composites Corporation. Cordray has skills in AutoCAD, SolidWorks, Matlab, and Microsoft Office. He also has experience as an automotive technician and enjoys challenges, taking pride in his work, and promoting a positive work environment.Yang liu resume
Yang liu resumeYang Liu
Ìý
1) Liu Yang is seeking a position as a civil engineer or quantity surveyor with experience in engineering project management, cost estimation, and design.
2) He holds a Master's degree in Civil Engineering from Nanyang Technological University and a Bachelor's degree in Engineering Management from Hunan Agricultural University where he graduated first in his class.
3) His internship experience includes conducting feasibility studies and cost analysis for development projects as a quantity surveyor and assisting with construction management and document review as a civil engineer.Resume of Mitchell R Holck
Resume of Mitchell R HolckMitchell Holck
Ìý
Mitchell Ryan Holck is a mechanical engineer with over 4 years of experience as a lead project engineer managing the design, development, and construction of pipeline systems. He has a Bachelor of Science in Mechanical Engineering from the University of Colorado at Colorado Springs with a 3.637 GPA. His experience also includes technical support, research assistance, aerospace design projects, and relevant technical skills in areas such as MATLAB, AutoCAD, Excel, Word, and PowerPoint.P1111410321
P1111410321Ashraf Aboshosha
Ìý
The document summarizes a two-branch parallel RC circuit Simulink model of a lithium polymer battery. The model parameters depend on temperature and state of charge, which are represented using 2D lookup tables. User-defined functions calculate open circuit voltage and internal resistance. A dedicated block autonomously detects charge/discharge transitions and resets the current integrator. Comparisons to experimental data show maximum errors of 3% for dynamic responses and 5% for static discharging responses.Resume
ResumeJonathan Burkhart
Ìý
This document is a resume for Jonathan D. Burkhart summarizing his education and work experience. He has a Bachelor's degree in Aerospace and Mechanical Engineering from SUNY Buffalo and is currently working as an Associate Engineer at Bechtel Marine Propulsion Corporation, where he performs structural analysis and design work supporting new submarine designs. Previous projects include brittle fracture analysis, fatigue analysis, and design work for nuclear reactor components. He has skills in 3D modeling, programming, and Microsoft Office applications.ori PAUSON CV ING ed.
ori PAUSON CV ING ed.Selorm Pauson
Ìý
This curriculum vitae outlines the educational and professional background of Selorm Kwame Paul Pauson. He holds a Higher National Diploma in Energy Systems/Renewable energy Systems Engineering from Koforidua Polytechnic. His work experience includes research projects in solar energy and energy auditing. Currently, he is completing his mandatory national service with VRA Akuse, working on projects related to their 2.5MW solar plant database, feasibility studies of renewable technologies, and more. His skills include data analysis of energy generation, plant maintenance, research, and presentation skills.9-1-15 lab 1 resume Final Draft
9-1-15 lab 1 resume Final DraftCesar Sarvide Chavez
Ìý
Cesar D. Sarvide Chavez provides his resume detailing his objective to obtain an entry level engineer position in transportation engineering. He has an Associate's degree in science from Sacramento City College and a Bachelor's degree in civil engineering from California State University, Sacramento where he also obtained his EIT certification. His education provided him coursework in various engineering disciplines including transportation engineering, structural design, soil mechanics, and environmental engineering. His skills include proficiency with AutoCAD, structural analysis software, Microsoft Office, and C++. He is bilingual in English and Spanish and has experience in lab work, tutoring, and internships with Caltrans and as an auto and computer technician providing repairs. He has received multiple scholarships recognizing hisEmilee_Williams_Resume
Emilee_Williams_ResumeEmilee Williams
Ìý
Emilee Williams is a senior mechanical engineering student at Montana State University seeking new opportunities. She has experience managing projects and communicating effectively as project leader for her senior project competition entry. Her background includes internships in building systems analysis and mechanical engineering, where she conducted thermal and cost analyses. She maintains a 3.5 GPA and involvement in several engineering professional societies.Technical Resume
Technical ResumeJeremiah Mosse
Ìý
Jeremiah Mosse is a mechanical engineering student at Liberty University with a 3.9 GPA. He has experience using SolidWorks, AutoCAD, and MATLAB. For school projects, he designed an energy analysis of dormitories and a device to test abrasion on conveyor belts. He also designed and 3D printed a miniature quadcopter. After graduation, he aims to pursue a career in product design, fabrication, and materials engineering. He has internship experience evaluating energy conservation and held various jobs.Matthew Taggart Official Resume
Matthew Taggart Official ResumeMatthew Taggart
Ìý
Matthew Taggart is a mechanical engineer seeking a position applying his skills. He has a Master's in Mechanical Engineering from Stevens Institute of Technology and a Bachelor's from Polytechnic Institute of NYU. His experience includes working as an energy intern analyzing clients' energy usage and recommending upgrades. He is proficient in SolidWorks, Creo, and MATLAB and has experience designing and fabricating a quadcopter for his senior project.Resume Current
Resume CurrentHenry Bendel
Ìý
Henry J. Bendel is a recent graduate of Keene State College seeking a career in sustainable product design. He has a 3.675 GPA and experience in CAD/CAM software, product design and development processes, and machining. His goal is to work in a collaborative environment where he can apply his technical skills and passion for learning. He has held internships in engineering design and construction management.NGHIA NGUYEN-resume
NGHIA NGUYEN-resumeNGHIA NGUYEN
Ìý
Nghia Nguyen is seeking a position as a mechanical engineer. He has a Bachelor of Science in Mechanical Engineering from Old Dominion University with a 3.2 GPA and concentrations in systems and design. He also has an Associate of Science in Engineering and an Associate of Science in Business from Tidewater Community College. His relevant coursework includes statics, solid mechanics, mechanical engineering design, fluids, and thermodynamics. He has skills in AutoCAD, Inventor, and MS Office and experience with Matlab. As a student at ODU, he collaborated on senior design projects involving a formula car transmission and a luminous control feedback system and gave a final presentation to area engineers.Gary_Magnotta_CV__23_6_2016
Gary_Magnotta_CV__23_6_2016Gary Magnotta
Ìý
This document provides information on the education and work experience of Gary Franco Magnotta. It details his educational background which includes graduating from Rhode Island College with a BS in Technology Education and working towards a Master's degree. It also outlines his various teaching positions held at several universities and high schools where he taught subjects such as CAD, engineering, and computer science. Additional experience includes working as an adjunct professor and completing externships with engineering firms. He has also served as a mentor for robotics teams and the ACE Mentoring Program of Rhode Island.Resume
ResumeVu Phan
Ìý
Vu Phan has extensive experience in electrical engineering through multiple internships and projects. He has a expected graduation date of December 2018 from the University of Minnesota with a degree in electrical engineering and a GPA of 3.49. Through internships, he has experience with circuit design, testing, and troubleshooting. He also has leadership experience as president of IEEE and coordinator of various programs.Sagar Shah Resume
Sagar Shah ResumeSagar Shah
Ìý
Sagar Shah is seeking an entry-level engineering position where he can utilize his leadership skills and analytical research experience. He received a Bachelor of Science in Mechanical Engineering from the University of Connecticut in 2015. His senior design project involved investigating the effects of CMAS on thermal barrier coatings using a gradient rig. He has research experience analyzing experimental and theoretical studies involving materials behavior and properties. Sagar also has leadership experience as vice-captain of a cricket club and social director of his fraternity.DBrigham_Resume
DBrigham_ResumeDerek Brigham
Ìý
Derek Brigham has experience in mechanical engineering, coding, and research. He received his B.S. in mechanical engineering from UC Merced in 2016 and is currently the Chief Financial Officer for a renewable energy project. His research focuses on increasing the surface area of carbon nanotubes to improve energy storage and conversion. He has also interned at a laboratory developing fuel cell technologies and assisted with construction projects.Austin Motley Resume 2016
Austin Motley Resume 2016Austin Motley
Ìý
Austin Motley is a mechanical engineer with a B.S. in mechanical engineering from Kansas State University. He has experience in thermodynamics, fluid mechanics, CAD, and FEA. His previous roles include being a custodian, pollution prevention intern, cook, tech support team member and leader, resident assistant, and member of an electric racing car executive team and marching band. He has skills in design software, FEA, leadership, mechanical controls, programming, problem-solving, and is a self-starter.A_Goswick Resume 3
A_Goswick Resume 3austin goswick
Ìý
Austin Goswick is seeking a position in maintenance engineering. He received a Bachelor of Science in Industrial and Systems Engineering from Texas A&M University with a 3.12 GPA and minors in Petroleum Engineering and Math. Currently, he is a Maintenance Engineering Intern at SpaceX where he performs preventative, corrective, and predictive maintenance to ensure reliability on test stands. Previously, he was a Completion Engineer Intern at Pendragon Oil/Clearfork Royalty where he assisted with designing stimulation treatments and hydraulic fracturing jobs. He also has experience from an SERC/XCOR Design Project in which he helped conceptualize, prototype, test, and fabricate a payload carrier structure for microgravity testing.RESUME - SEPTEMBER 2014
RESUME - SEPTEMBER 2014Everett Hettema
Ìý
Everett J. Hettema is a mechanical engineering student at the University of Maryland expected to graduate in May 2015 with a 3.13 GPA. He has internship experience providing project and construction management at CFR Engineering, where he developed HVAC and plumbing systems using AutoCAD. Hettema also job shadowed at ColonialWebb, assisting with 3D modeling and observing field personnel. Additionally, he has led multiple design teams at UMD, including creating a 3D scale model of a Boeing 747 and designing a beam structure that won a competition for highest strength-to-weight ratio. Hettema is proficient in various engineering software and has held other roles providing customer service and data entry.Resume updated Sept 2016
Resume updated Sept 2016Julio Crespo
Ìý
This resume is for Julio Mauricio Crespo, who is seeking a full-time position as an electrical and electronics engineer. He will graduate in December 2016 with a BS in electrical and electronics engineering from CSU Sacramento and has experience in hardware, software, programming languages, and engineering projects. His experience includes internships in energy monitoring and quality control, where he designed interfaces, updated drawings, assisted engineers, and ensured code compliance.shan-sun--ms-engineering---resume
shan-sun--ms-engineering---resumeShan Sun
Ìý
Shan Sun is a mechanical engineer with experience in mechanical design, MEMS design, hydraulic systems, project management, CAD software, tolerance analysis, design of experiments, and problem solving. He has a M.S. in Mechanical Engineering from UC Irvine anticipated in March 2015, and a B.S. in Mechatronic Engineering from Wuhan University of Science and Technology. His professional experience includes graduate research at UC Irvine Microsystems Lab involving MEMS design and fabrication, and serving as a project manager and team member for UC Irvine's 2013 Formula SAE race car team.More Related Content
What's hot (8)
Engineering Resume
Engineering ResumeAmanda Elliott
Ìý
Amanda Elliott is a junior at the University of South Carolina studying electrical engineering with a 3.78 GPA. She has received scholarships from Woodrow Wilson and the National Academy for Nuclear Training. Her experience includes an internship at Surry Nuclear Power Station where she assisted with various electrical engineering projects. She also tutors students in calculus, algorithms, signals and systems, and circuits. Her leadership roles include president of Eta Kappa Nu honor society and vice president of the Peer Advisory Council for her department.Resume Revised Feb, 29 2016
Resume Revised Feb, 29 2016Jake Cordray
Ìý
Jake Cordray is seeking an entry-level position as a mechanical engineer. He has a Bachelor of Science in Mechanical Engineering from the University of Toledo and has held internships with Colorado Springs Utilities and Ludlow Composites Corporation. Cordray has skills in AutoCAD, SolidWorks, Matlab, and Microsoft Office. He also has experience as an automotive technician and enjoys challenges, taking pride in his work, and promoting a positive work environment.Yang liu resume
Yang liu resumeYang Liu
Ìý
1) Liu Yang is seeking a position as a civil engineer or quantity surveyor with experience in engineering project management, cost estimation, and design.
2) He holds a Master's degree in Civil Engineering from Nanyang Technological University and a Bachelor's degree in Engineering Management from Hunan Agricultural University where he graduated first in his class.
3) His internship experience includes conducting feasibility studies and cost analysis for development projects as a quantity surveyor and assisting with construction management and document review as a civil engineer.Resume of Mitchell R Holck
Resume of Mitchell R HolckMitchell Holck
Ìý
Mitchell Ryan Holck is a mechanical engineer with over 4 years of experience as a lead project engineer managing the design, development, and construction of pipeline systems. He has a Bachelor of Science in Mechanical Engineering from the University of Colorado at Colorado Springs with a 3.637 GPA. His experience also includes technical support, research assistance, aerospace design projects, and relevant technical skills in areas such as MATLAB, AutoCAD, Excel, Word, and PowerPoint.P1111410321
P1111410321Ashraf Aboshosha
Ìý
The document summarizes a two-branch parallel RC circuit Simulink model of a lithium polymer battery. The model parameters depend on temperature and state of charge, which are represented using 2D lookup tables. User-defined functions calculate open circuit voltage and internal resistance. A dedicated block autonomously detects charge/discharge transitions and resets the current integrator. Comparisons to experimental data show maximum errors of 3% for dynamic responses and 5% for static discharging responses.Resume
ResumeJonathan Burkhart
Ìý
This document is a resume for Jonathan D. Burkhart summarizing his education and work experience. He has a Bachelor's degree in Aerospace and Mechanical Engineering from SUNY Buffalo and is currently working as an Associate Engineer at Bechtel Marine Propulsion Corporation, where he performs structural analysis and design work supporting new submarine designs. Previous projects include brittle fracture analysis, fatigue analysis, and design work for nuclear reactor components. He has skills in 3D modeling, programming, and Microsoft Office applications.ori PAUSON CV ING ed.
ori PAUSON CV ING ed.Selorm Pauson
Ìý
This curriculum vitae outlines the educational and professional background of Selorm Kwame Paul Pauson. He holds a Higher National Diploma in Energy Systems/Renewable energy Systems Engineering from Koforidua Polytechnic. His work experience includes research projects in solar energy and energy auditing. Currently, he is completing his mandatory national service with VRA Akuse, working on projects related to their 2.5MW solar plant database, feasibility studies of renewable technologies, and more. His skills include data analysis of energy generation, plant maintenance, research, and presentation skills.9-1-15 lab 1 resume Final Draft
9-1-15 lab 1 resume Final DraftCesar Sarvide Chavez
Ìý
Cesar D. Sarvide Chavez provides his resume detailing his objective to obtain an entry level engineer position in transportation engineering. He has an Associate's degree in science from Sacramento City College and a Bachelor's degree in civil engineering from California State University, Sacramento where he also obtained his EIT certification. His education provided him coursework in various engineering disciplines including transportation engineering, structural design, soil mechanics, and environmental engineering. His skills include proficiency with AutoCAD, structural analysis software, Microsoft Office, and C++. He is bilingual in English and Spanish and has experience in lab work, tutoring, and internships with Caltrans and as an auto and computer technician providing repairs. He has received multiple scholarships recognizing hisSimilar to Resume - Sawyer Benavidez (20)
Emilee_Williams_Resume
Emilee_Williams_ResumeEmilee Williams
Ìý
Emilee Williams is a senior mechanical engineering student at Montana State University seeking new opportunities. She has experience managing projects and communicating effectively as project leader for her senior project competition entry. Her background includes internships in building systems analysis and mechanical engineering, where she conducted thermal and cost analyses. She maintains a 3.5 GPA and involvement in several engineering professional societies.Technical Resume
Technical ResumeJeremiah Mosse
Ìý
Jeremiah Mosse is a mechanical engineering student at Liberty University with a 3.9 GPA. He has experience using SolidWorks, AutoCAD, and MATLAB. For school projects, he designed an energy analysis of dormitories and a device to test abrasion on conveyor belts. He also designed and 3D printed a miniature quadcopter. After graduation, he aims to pursue a career in product design, fabrication, and materials engineering. He has internship experience evaluating energy conservation and held various jobs.Matthew Taggart Official Resume
Matthew Taggart Official ResumeMatthew Taggart
Ìý
Matthew Taggart is a mechanical engineer seeking a position applying his skills. He has a Master's in Mechanical Engineering from Stevens Institute of Technology and a Bachelor's from Polytechnic Institute of NYU. His experience includes working as an energy intern analyzing clients' energy usage and recommending upgrades. He is proficient in SolidWorks, Creo, and MATLAB and has experience designing and fabricating a quadcopter for his senior project.Resume Current
Resume CurrentHenry Bendel
Ìý
Henry J. Bendel is a recent graduate of Keene State College seeking a career in sustainable product design. He has a 3.675 GPA and experience in CAD/CAM software, product design and development processes, and machining. His goal is to work in a collaborative environment where he can apply his technical skills and passion for learning. He has held internships in engineering design and construction management.NGHIA NGUYEN-resume
NGHIA NGUYEN-resumeNGHIA NGUYEN
Ìý
Nghia Nguyen is seeking a position as a mechanical engineer. He has a Bachelor of Science in Mechanical Engineering from Old Dominion University with a 3.2 GPA and concentrations in systems and design. He also has an Associate of Science in Engineering and an Associate of Science in Business from Tidewater Community College. His relevant coursework includes statics, solid mechanics, mechanical engineering design, fluids, and thermodynamics. He has skills in AutoCAD, Inventor, and MS Office and experience with Matlab. As a student at ODU, he collaborated on senior design projects involving a formula car transmission and a luminous control feedback system and gave a final presentation to area engineers.Gary_Magnotta_CV__23_6_2016
Gary_Magnotta_CV__23_6_2016Gary Magnotta
Ìý
This document provides information on the education and work experience of Gary Franco Magnotta. It details his educational background which includes graduating from Rhode Island College with a BS in Technology Education and working towards a Master's degree. It also outlines his various teaching positions held at several universities and high schools where he taught subjects such as CAD, engineering, and computer science. Additional experience includes working as an adjunct professor and completing externships with engineering firms. He has also served as a mentor for robotics teams and the ACE Mentoring Program of Rhode Island.Resume
ResumeVu Phan
Ìý
Vu Phan has extensive experience in electrical engineering through multiple internships and projects. He has a expected graduation date of December 2018 from the University of Minnesota with a degree in electrical engineering and a GPA of 3.49. Through internships, he has experience with circuit design, testing, and troubleshooting. He also has leadership experience as president of IEEE and coordinator of various programs.Sagar Shah Resume
Sagar Shah ResumeSagar Shah
Ìý
Sagar Shah is seeking an entry-level engineering position where he can utilize his leadership skills and analytical research experience. He received a Bachelor of Science in Mechanical Engineering from the University of Connecticut in 2015. His senior design project involved investigating the effects of CMAS on thermal barrier coatings using a gradient rig. He has research experience analyzing experimental and theoretical studies involving materials behavior and properties. Sagar also has leadership experience as vice-captain of a cricket club and social director of his fraternity.DBrigham_Resume
DBrigham_ResumeDerek Brigham
Ìý
Derek Brigham has experience in mechanical engineering, coding, and research. He received his B.S. in mechanical engineering from UC Merced in 2016 and is currently the Chief Financial Officer for a renewable energy project. His research focuses on increasing the surface area of carbon nanotubes to improve energy storage and conversion. He has also interned at a laboratory developing fuel cell technologies and assisted with construction projects.Austin Motley Resume 2016
Austin Motley Resume 2016Austin Motley
Ìý
Austin Motley is a mechanical engineer with a B.S. in mechanical engineering from Kansas State University. He has experience in thermodynamics, fluid mechanics, CAD, and FEA. His previous roles include being a custodian, pollution prevention intern, cook, tech support team member and leader, resident assistant, and member of an electric racing car executive team and marching band. He has skills in design software, FEA, leadership, mechanical controls, programming, problem-solving, and is a self-starter.A_Goswick Resume 3
A_Goswick Resume 3austin goswick
Ìý
Austin Goswick is seeking a position in maintenance engineering. He received a Bachelor of Science in Industrial and Systems Engineering from Texas A&M University with a 3.12 GPA and minors in Petroleum Engineering and Math. Currently, he is a Maintenance Engineering Intern at SpaceX where he performs preventative, corrective, and predictive maintenance to ensure reliability on test stands. Previously, he was a Completion Engineer Intern at Pendragon Oil/Clearfork Royalty where he assisted with designing stimulation treatments and hydraulic fracturing jobs. He also has experience from an SERC/XCOR Design Project in which he helped conceptualize, prototype, test, and fabricate a payload carrier structure for microgravity testing.RESUME - SEPTEMBER 2014
RESUME - SEPTEMBER 2014Everett Hettema
Ìý
Everett J. Hettema is a mechanical engineering student at the University of Maryland expected to graduate in May 2015 with a 3.13 GPA. He has internship experience providing project and construction management at CFR Engineering, where he developed HVAC and plumbing systems using AutoCAD. Hettema also job shadowed at ColonialWebb, assisting with 3D modeling and observing field personnel. Additionally, he has led multiple design teams at UMD, including creating a 3D scale model of a Boeing 747 and designing a beam structure that won a competition for highest strength-to-weight ratio. Hettema is proficient in various engineering software and has held other roles providing customer service and data entry.Resume updated Sept 2016
Resume updated Sept 2016Julio Crespo
Ìý
This resume is for Julio Mauricio Crespo, who is seeking a full-time position as an electrical and electronics engineer. He will graduate in December 2016 with a BS in electrical and electronics engineering from CSU Sacramento and has experience in hardware, software, programming languages, and engineering projects. His experience includes internships in energy monitoring and quality control, where he designed interfaces, updated drawings, assisted engineers, and ensured code compliance.shan-sun--ms-engineering---resume
shan-sun--ms-engineering---resumeShan Sun
Ìý
Shan Sun is a mechanical engineer with experience in mechanical design, MEMS design, hydraulic systems, project management, CAD software, tolerance analysis, design of experiments, and problem solving. He has a M.S. in Mechanical Engineering from UC Irvine anticipated in March 2015, and a B.S. in Mechatronic Engineering from Wuhan University of Science and Technology. His professional experience includes graduate research at UC Irvine Microsystems Lab involving MEMS design and fabrication, and serving as a project manager and team member for UC Irvine's 2013 Formula SAE race car team.Resume 2015
Resume 2015Ben Edkin
Ìý
Benjamin Edkin is seeking a job in mechanical engineering. He has a Bachelor of Science in Mechanical Engineering from Georgia Tech with a 3.60 GPA. He has over 3 years of work experience including as a Mechanical Supervisor at Norfolk Southern Corporation and internships involving quality engineering and project engineering. His skills include CAD, CMM programming, GD&T certification, and various Microsoft software. He has received academic honors including being on the Dean's List every semester and being nominated for Pi Tau Sigma honors fraternity.Krause EE Resume 2016 v2
Krause EE Resume 2016 v2Connor Krause
Ìý
Connor Krause is pursuing a Bachelor of Science in Electrical Engineering from Kansas State University, expected to graduate in May 2016 with a 3.6 GPA. He is a member of the Wildcat Wind Power Design Team, working on the electrical design team focusing on load and speed detection. Krause has worked as a student painter for Kansas State Housing and Dining Services and as a parking services employee for Kansas State Athletic Services. He has received multiple scholarships and has references from his electrical engineering professor, the president of the Wildcat Wind Power Design Team, and a former supervisor from parking services.Gabrielle Haigler Resume
Gabrielle Haigler ResumeGabrielle Haigler
Ìý
The document is a resume for Gabrielle Haigler, who is pursuing a Bachelor of Science in Mechanical Engineering from Lamar University expected in May 2017. She has experience as an engineering intern conducting pipe stress analysis using CAESAR II and NozzlePRO software. She also has experience in store front sales and as a certified nursing assistant. Relevant academic projects include serving as Secretary for her university's SAE Mini Baja design team and working on a Non-Newtonian fluid project.Lances newest resume 2.15.17
Lances newest resume 2.15.17Lance White
Ìý
Lance Reed White is a mechanical engineering student at the University of Central Florida seeking an internship. He has a 3.779 GPA and is on track to graduate in May 2019. His relevant experience includes leading a team that designed and built a human-powered vehicle for a competition and selecting materials for a Mars rover design project. He has skills in CAD, data analysis, and customer service from past food service and amusement park jobs.Ahmed Mahdi Resume 
Ahmed Mahdi Resume Ahmed F. Mahdi
Ìý
Ahmed F. Mahdi is a mechanical engineer with over 9 years of experience in engineering design, thermal and fluid systems, and teaching engineering. He has a Ph.D. in Mechanical & Equipment Engineering and certifications in AutoCAD, Inventor, SolidWorks, and Revit. His experience includes engineering design, finite element analysis, computational fluid dynamics, hydraulic and pneumatic systems design, and aircraft maintenance. Currently he is seeking opportunities as a mechanical engineer where he can apply his skills.Planas Resume
Planas ResumeJohn Raymond Planas
Ìý
Raymond Planas is a mechanical engineer with experience in HVAC design, solar PV design, and CAD drafting. He has a bachelor's degree in mechanical engineering from UNLV with a GPA of 3.64. He is proficient in various engineering software programs and holds a Nevada Certified Engineer Intern certification. Planas seeks to utilize his diverse skills and quality focus as a mechanical engineer.Resume - Sawyer Benavidez
- 1. Sawyer A. Benavidez – E.I.T. 119 S. FM 1601 P.O. Box 217 Penwell, TX 79776 (432) 634-8424 ▪ sawyer.a.benavidez@gmail.com Objective Seeking an entry-level position as a mechanical engineer or related field. Education University of Texas of the Permian Basin, Odessa, TX Major: Mechanical Engineering Graduation: December 2015 GPA: 3.88 Employment Experience TxDOT, Summer Engineering Tech 06/01/2015 – 08/15/2015 Odessa, TX  Assisted in the inspection of roadway projects such as FM 307 and SH 302, while constantly promoting a safe work environment.  Performed lab tests on concrete samples, collected HMA cores, and caliche samples.  Created VBA templates in Excel to expedite recording and calculating data. UTPB Dept. of Continuing Education, Student Worker 04/2013 – 04/2015 Odessa, TX  Co-managed the 2014 Engineering Summer Program for UTPB.  Mentor to middle school and high school students with future aspirations in engineering.  Coordinated with other faculty and students to advertise dual-credit courses at UTPB using Microsoft Office, resulting in the dual-credit program making up 20% of the university’s population.  Assisted students from Presidio in passing their Compass Exam with a 91% success rate in the UTPB Summer Bridge Program. UTPB Success Center, Tutor 09/2012 – 04/2013 Odessa, TX  Assisted students with their homework and test preparation in University Physics I & II, and Engineering Calculus I & II. Design Projects  Worked with peers to design a piston with an infinite fatigue life via MathCAD and Creo (Parametric & Simulate) for a diesel engine.  Collaborated with others to produce a design for a cheaper water well pump puller, including aspects such as economics, risk analysis, safety, and operations with MathCAD, Excel, and graphical computer aided design programs.  Designed a fuel delivery system for a small power plant running six 6525 kW engines. Software Skills  Creo (Parametric & Simulate)  MathCAD  Engineering Equation Solver  LabVIEW  VBA (via Cal Poly Pomona)  Microsoft Office Associations  American Society of Mechanical Engineering (ASME)  Volunteer at the Humane Society of Odessa  Keep Odessa Beautiful  National Society of Leadership and Success (NSLS)  Order of the Engineer Honors & Scholarships  Dean’s and/or President’s List every semester throughout college.  Passed the Fundamentals of Engineering Exam  Freshman Merit Scholarship  Permian Basin Area Foundation Scholarship  Education Foundation Scholarship  UTPB Engineering Scholarship  Mexican-American Scholarship Committee (MASC) Scholarship  Graduated with Honors – Magna Cum Laude