SwapnikC
0 likes174 views
Chimalamarri Swapnik is seeking a position in applications or firmware engineering. He has a Master's degree in integrated circuit design from Nanyang Technological University and Technical University of Munich, and a Bachelor's in electronics and communications from Jawaharlal Nehru Technological University. His experience includes firmware development for microcontrollers and test equipment using Python at Silicon Laboratories.
1 of 2
Download to read offline
Recommended
Resume_DarshanShah_MTech_Embedded_Systems
Resume_DarshanShah_MTech_Embedded_SystemsDarshan Shah
油
Darshan Shah seeks a career in areas that provide job satisfaction and allow for continuous learning and skill development. He has 2.5 years of experience in post silicon verification, testing, and test automation of communication systems. He is proficient in C programming and has experience with hardware-software interfaces. He aims to improve his skills in processor architecture, embedded programming, and communication system design.Gopalakrishnan
GopalakrishnanActive Galaxy
油
S.Gopalakrishnan is seeking a position as an Embedded Developer with over 3 years of experience in projects involving digital image processing, communication protocols like I2C and UART, and real-time applications. He has expertise in analysis, design and implementation. He holds an M.Eng. in Embedded Systems and B.Eng. in Electronics and Communication.Fresher_IIT Kgp-CV
Fresher_IIT Kgp-CVjas22081990
油
Jaswant Singh Panthi is a 25-year-old seeking a career in technology. He has an M.Tech in Embedded Controls & Software from IIT Kharagpur and a B.E. in Electronics & Communication. His academic projects include applying genetic algorithms to optimize network-on-chip design and developing an intelligent security and automation system. He has skills in C, Verilog, assembly programming, Proteus, Simulink, and State Flow and experience with microcontrollers and microprocessors. He has participated in leadership and technical workshops and volunteers his time for educational events.Ranjitha_R_V_Resume
Ranjitha_R_V_ResumeRanjitha Madhu
油
Ranjitha R V is a R&D Engineer at Nokia Networks in Bangalore, India. She has over 3 years of experience in automation and verification of various features for LTE eNodeB such as network impairments scenarios, IPsec, and emergency bypass features. She is proficient in languages like C, C++, Java, Python and frameworks like Robot Framework. Ranjitha holds a B.E. in Computer Science and has completed projects on topics like college portal development, traffic analysis using Hadoop, and automation testing.TOBIN MATHEW
TOBIN MATHEWTobin Mathew
油
- Tobin Mathew is seeking an LTE Inter-Operability Test (IOT) engineering position with experience testing LTE networks and protocols. He has a Master's in Electrical Engineering from the University of North Texas and relevant technical skills and coursework. His experience includes IOT testing of Motorola devices at Motorola Mobility and junior RF engineering at NSN.A Major Project Report: Development Of Hard IP Core For Convolution Encoder
A Major Project Report: Development Of Hard IP Core For Convolution EncoderAalay Kapadia
油
This document is a major project report submitted to fulfill degree requirements. It was created by Archit Vora and Aalay Kapadia under the guidance of Prof. Usha Mehta. The report details the development of a hard intellectual property core for a convolution encoder. It was submitted to the Department of Electrical Engineering at the Institute of Technology, Nirma University in partial fulfillment of a Bachelor of Technology degree in Electronics and Communication Engineering.B.E M.E projects 
B.E M.E projects Senthil Kumar
油
This document lists various electrical, electronics, and computer engineering project options for students along with their costs ranging from Rs. 15,000 to Rs. 20,000. It also details support services provided like coding, references, presentations, study materials, hardware, training, and opportunities for journal publication. Project topics span areas like embedded systems, power systems, robotics, artificial intelligence, and more. Hands-on training is available in their research labs.Surya Resume Long
Surya Resume Longsurya prakash
油
Surya Prakash is a final year undergraduate student looking for research opportunities in embedded systems related to IoT, distributed computing, and robotics. He has experience with various microcontrollers and sensors, programming languages like C and Python, and has completed projects involving non-intrusive load monitoring, object detection using sonar, and music recognition. His resume outlines his educational qualifications, technical skills, internship experiences, projects, achievements, and involvement in extracurricular activities.bujji embedded software engineer
bujji embedded software engineerbujjibabu gaadi
油
This document contains the resume of Bujjibabu Gaadi. It summarizes his professional experience working as an Embedded Software Engineer since 2013, including projects involving temperature and current monitoring and robot management systems. It also lists his educational qualifications including a B.Tech in Electronics and Communication Engineering, and an academic project involving RFID and tollgate management.CV_SON
CV_SONSon Tran
油
This document is a resume for Son N. Tran. It summarizes his education, projects, work experience, skills, and awards. He is currently pursuing a Master's degree in Mechatronics Engineering from the University of Trento in Italy. His projects include designing an embedded model predictive controller for autonomous vehicles and implementing OBD II on a BLE device. He has work experience as an embedded software engineer and is currently interning at Fondazione Bruno Kessler, where he is evaluating a BLE sensor platform. He is proficient in languages like C/C++, Matlab, and Python and has received several academic awards and scholarships.Updated Resume - Tanmay Chaturvedi
Updated Resume - Tanmay ChaturvediUniversity of Colorado Boulder
油
Tanmay Chaturvedi has an M.S. in Electrical Engineering from the University of Colorado Boulder and a B.Tech. in Electronics and Communication Engineering. He has work experience as a research engineer at Nanyang Technological University where he co-invented a wireless sensing system. His technical skills include programming in C, Python, and Assembly as well as experience with hardware such as Raspberry Pi, TI MSP432, and Xilinx FPGAs. He has internship experience in areas such as wireless sensor networks, firmware updates, and automotive infotainment systems.Internet of Things: Course Presentation
Internet of Things: Course PresentationLeopoldo Armesto
油
This document outlines an introductory course on Internet of Things (IoT). The course aims to introduce basic electronics concepts and microcontrollers like Arduino and ESP, and teach how to program them for IoT projects. It covers reading sensor data, controlling actuators, and creating simple IoT devices. The course contains 5 units on electronics, programming, sensors/actuators, and a final project. Students will learn to understand IoT concepts, interface with sensors and actuators, and program microcontrollers to remotely control devices over the internet. Evaluation includes quizzes, assignments, and a project to create a smart IoT device.Penglun_Li
Penglun_LiPenglun Li
油
This document is a resume for Penglun Li that outlines his professional experience and education. It summarizes that he has 4 years of experience as a design validation testing engineer at Motorola Mobility, where he performed both manual and automated testing on mobile phones and watches to identify bugs. It also notes that he has a Master's degree in Electrical and Computer Engineering from Illinois Institute of Technology and conducted various class projects involving programming in languages like C, C++, Python, and Java.SUNANDITA RESUME - 1
SUNANDITA RESUME - 1sunandita ghosh
油
Sunandita Ghosh is seeking an innovative career in academic and research fields where she can utilize her skills in technology development. She has a M.Tech in Intelligent Automation and Robotics from Jadavpur University with a 9.1 CGPA. Her M.Tech project involved gesture recognition of elderly people using Microsoft Kinect. Currently, she is working on EEG signal processing research relating to cognitive science and artificial intelligence. She has work experience as a lecturer and skills in sensors, LabVIEW, PLC programming, signal processing, artificial intelligence, and computer networking.ApoorvJoshi_Resume
ApoorvJoshi_ResumeApoorv Joshi
油
Apoorv V. Joshi is seeking a job as a software engineer. He has a Master's degree in Computer Engineering from North Carolina State University and a Bachelor's degree in Electronics and Telecommunication from Pune Institute of Computer Technology in India. His technical skills include programming languages like Java, Python, C, C++, and network tools. He has internship experience developing an electro retino graphy system. His projects involve creating a handover application for VoIP calls on Android and modifying Linux kernel modules to prioritize emergency network traffic. He also has experience with simulation tools and analyzing variants of TCP congestion control.Mahendar
Mahendarmahendar raju
油
This document provides a summary of qualifications for Mahendar.R, an embedded developer with over 2 years of experience. It outlines his skills in embedded C programming, microcontrollers like PIC16f877A and dsPIC30f4011, and protocols like UART, SPI, I2C and CAN. It also lists his past work developing systems like a taxi management system and Wi-Fi controller. Mahendar holds an M.Eng in VLSI Design and has experience with tools like MPLAB IDE, Proteus and Xilinx.Dominador Urpiano Jr
Dominador Urpiano JrDominador Urpiano Jr.
油
This document is a resume for Dominador G. Urpiano Jr. who graduated from Technological Institute of the Philippines with a BS in Electronics and Communications Engineering in 2015. It outlines his objective to establish an engineering career demonstrating his learning outcomes. It also lists his design projects, training, skills, affiliations and references.Praveen Kumar S S.docx(1)
Praveen Kumar S S.docx(1)Praveenkumar S S
油
This document is a resume for Praveen Kumar S S. It summarizes his professional experience in embedded systems and testing over 2 years, including projects involving GPS clocks, onboard satellite computers, RF LAN systems for satellites, and satellite tracking from a ground station. It also lists his education as a Bachelor of Engineering in Electronics and Communication and skills in areas like C programming, microcontrollers, MATLAB, and various simulation and development tools.Embedded Software Developer -- 8 months Exp
Embedded Software Developer -- 8 months Exppraveen kumar
油
I am working as Embedded software Developer from past 8 months in VJT Bangalore, PG in VLSI Design and Embedded System from Alpha college of Engg, Completed 5 months of course in "Advance Diploma in Embedded Development" from ISM Bangalore, and completed "RTL Verification using verilog" course from IEEE.AK_rai_06
AK_rai_06Ankit rai iit kharagpur
油
Ankit Kumar Rai is a Senior Engineer at Larsen & Toubro Ltd specializing in radar development. He has over 2 years of experience developing, simulating, and testing radar systems. His responsibilities include analyzing radar system parameters, designing antennas and RF components, and ensuring systems meet customer specifications. Some of his current projects include developing a low profile antenna array for satellite communication and a dual band telemetry system. He holds an M.Tech in RF and Microwave Engineering from IIT Kharagpur and a B.Tech in Electronics and Communication Engineering.Electronics engineer resume
Electronics engineer resumeMohammed Irshad S K
油
This document contains a summary of an electronics and communication engineer with 4 years of experience in embedded system design, programming, and testing. It includes work history from 2013 to present at Keltron Controls as a project engineer developing environmental and power panels and a towed array sensor system using technologies like Ethernet, FreeRTOS, and ARM Cortex-M3. It also includes experience from 2009 to 2011 as an engineer in research and development at Consyt Integrated Control System developing a data acquisition system for tomography applications using technologies like PIC24F, C30 Compiler, and USB.Lima Resume
Lima ResumeMichael Lima
油
Electrical Engineering Student seeking a full-time entry level position with a focus on Digital Hardware Design and Embedded Systems. Possess project experience in Robotics and internship experience with companies such as Embraer and Blackberry. Highly motivated and proactive with strong verbal and written communication skills.INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/ITASHOKKUMAR RAMAR
油
The document describes an in-plant training program conducted for pre-final year students in various engineering fields including ECE, EEE, E&I, ICE, CSE, IT and Biomedical. The 30 hour program covers topics like electronics component identification, basic circuit assembly and soldering, Orcad circuit design software, embedded systems, microcontroller interfacing, sensors and sample project testing. A similar 20 hour program for CSE/IT and MCA students covers C and Visual Basic programming basics and hardware interfacing. The fee for the program is Rs. 1000 per student.ES_Resume
ES_ResumeSrinivaasa Reddy Mukku
油
Srinivasulu Mukku is seeking opportunities as an embedded and IoT developer with skills in C, C++, Python, Linux, and embedded systems. He has a Bachelor's degree in electrical engineering and experience working as a design and development engineer. His current internship project involves an RFID attendance system using an 8051 microcontroller. Mukku also completed an internship project involving an electronic lock authenticated by fingerprint or password that was built using an ARM microcontroller.Naveen Ravi - 1 year resume v2.0 
Naveen Ravi - 1 year resume v2.0 Naveen Ravi
油
R. Naveen has 1 year of experience in embedded systems development at Qbitronics. He has skills in microcontrollers like 8051, PIC, and AVR, and software tools including Keil uVision, CCS Compiler, and MPLAB. His responsibilities include designing and developing embedded software applications, writing code according to standards, and supporting customers. He has a B.E. in Electronics and Communication Engineering from Karpagam University.Girish one year
Girish one yeargirish bb
油
- Girish B B has a M.Tech in Signal Processing from REVA ITM, Bangalore with expertise in signal processing concepts and advanced C programming. He has over 1.5 years of work experience.
- He currently works as a Trainee Engineer at Effent Technology where he optimized and tested an AAC audio decoder using C, Microsoft Visual Studio, and Eclipse.
- Prior to this, he completed an 8 month internship involving cell detection in liver disease images using MATLAB and SIMULINK.Suraj Resume
Suraj Resumesuraj jagadale
油
This document is a curriculum vitae that summarizes the career and qualifications of an applicant seeking a position as a Research, Design & Development Engineer. The applicant has 1.2 years of experience in embedded system development using microcontrollers and programming skills in Embedded-C. Their educational background includes a B.Tech in Electronics and Communication Technology. They have experience with microcontrollers, communication protocols, PCB design software, and simulation tools. Their most recent role involved embedded C programming, selecting microcontrollers, specifying system requirements, and providing client support for PIC-based tools.resume
resumesween krishna
油
Sweenkrishna is seeking a position in embedded systems. He has a Bachelor's degree in Electrical and Electronics Engineering and has worked as an embedded developer for over 2 years. His experience includes designing and developing embedded software and hardware, providing training, and completing projects for clients involving PIC and ARM microcontrollers. His areas of interest include embedded systems, digital electronics, VLSI, and programming languages like C, C++, and Java.Updated amit resume
Updated amit resumemohit rawat
油
- The document contains the resume of Amit Kaushik which summarizes his personal details, education qualifications, work experience and skills. It details his B.Tech degree in electronics and communication engineering and his current role as an FM SWITCH PACKET CORE ENGINEER at Ericsson. It also provides details of his previous work as an AM-NSS engineer at Nokia solution networks and internships. The resume lists his proficiency in technologies like MATLAB, Arduino, Raspberry Pi and programming languages C++ and C. It also outlines his achievements and projects completed.VINOD_KAMALAPUR_RESUME (1)
VINOD_KAMALAPUR_RESUME (1)vinod kamalapur
油
Vinod Kamalapur is seeking an opportunity as a product engineer with experience in image sensor validation. He has a B.E. in electronics and communication and is undergoing advanced training in design and verification. He has published a paper on designing complex multipliers using Vedic mathematics and has experience undertaking projects involving UART IP core verification, router design/verification, and implementing cryptographic algorithms on FPGAs. His skills include Verilog HDL, UVM methodology, and using EDA tools for design and verification.More Related Content
What's hot (19)
bujji embedded software engineer
bujji embedded software engineerbujjibabu gaadi
油
This document contains the resume of Bujjibabu Gaadi. It summarizes his professional experience working as an Embedded Software Engineer since 2013, including projects involving temperature and current monitoring and robot management systems. It also lists his educational qualifications including a B.Tech in Electronics and Communication Engineering, and an academic project involving RFID and tollgate management.CV_SON
CV_SONSon Tran
油
This document is a resume for Son N. Tran. It summarizes his education, projects, work experience, skills, and awards. He is currently pursuing a Master's degree in Mechatronics Engineering from the University of Trento in Italy. His projects include designing an embedded model predictive controller for autonomous vehicles and implementing OBD II on a BLE device. He has work experience as an embedded software engineer and is currently interning at Fondazione Bruno Kessler, where he is evaluating a BLE sensor platform. He is proficient in languages like C/C++, Matlab, and Python and has received several academic awards and scholarships.Updated Resume - Tanmay Chaturvedi
Updated Resume - Tanmay ChaturvediUniversity of Colorado Boulder
油
Tanmay Chaturvedi has an M.S. in Electrical Engineering from the University of Colorado Boulder and a B.Tech. in Electronics and Communication Engineering. He has work experience as a research engineer at Nanyang Technological University where he co-invented a wireless sensing system. His technical skills include programming in C, Python, and Assembly as well as experience with hardware such as Raspberry Pi, TI MSP432, and Xilinx FPGAs. He has internship experience in areas such as wireless sensor networks, firmware updates, and automotive infotainment systems.Internet of Things: Course Presentation
Internet of Things: Course PresentationLeopoldo Armesto
油
This document outlines an introductory course on Internet of Things (IoT). The course aims to introduce basic electronics concepts and microcontrollers like Arduino and ESP, and teach how to program them for IoT projects. It covers reading sensor data, controlling actuators, and creating simple IoT devices. The course contains 5 units on electronics, programming, sensors/actuators, and a final project. Students will learn to understand IoT concepts, interface with sensors and actuators, and program microcontrollers to remotely control devices over the internet. Evaluation includes quizzes, assignments, and a project to create a smart IoT device.Penglun_Li
Penglun_LiPenglun Li
油
This document is a resume for Penglun Li that outlines his professional experience and education. It summarizes that he has 4 years of experience as a design validation testing engineer at Motorola Mobility, where he performed both manual and automated testing on mobile phones and watches to identify bugs. It also notes that he has a Master's degree in Electrical and Computer Engineering from Illinois Institute of Technology and conducted various class projects involving programming in languages like C, C++, Python, and Java.SUNANDITA RESUME - 1
SUNANDITA RESUME - 1sunandita ghosh
油
Sunandita Ghosh is seeking an innovative career in academic and research fields where she can utilize her skills in technology development. She has a M.Tech in Intelligent Automation and Robotics from Jadavpur University with a 9.1 CGPA. Her M.Tech project involved gesture recognition of elderly people using Microsoft Kinect. Currently, she is working on EEG signal processing research relating to cognitive science and artificial intelligence. She has work experience as a lecturer and skills in sensors, LabVIEW, PLC programming, signal processing, artificial intelligence, and computer networking.ApoorvJoshi_Resume
ApoorvJoshi_ResumeApoorv Joshi
油
Apoorv V. Joshi is seeking a job as a software engineer. He has a Master's degree in Computer Engineering from North Carolina State University and a Bachelor's degree in Electronics and Telecommunication from Pune Institute of Computer Technology in India. His technical skills include programming languages like Java, Python, C, C++, and network tools. He has internship experience developing an electro retino graphy system. His projects involve creating a handover application for VoIP calls on Android and modifying Linux kernel modules to prioritize emergency network traffic. He also has experience with simulation tools and analyzing variants of TCP congestion control.Mahendar
Mahendarmahendar raju
油
This document provides a summary of qualifications for Mahendar.R, an embedded developer with over 2 years of experience. It outlines his skills in embedded C programming, microcontrollers like PIC16f877A and dsPIC30f4011, and protocols like UART, SPI, I2C and CAN. It also lists his past work developing systems like a taxi management system and Wi-Fi controller. Mahendar holds an M.Eng in VLSI Design and has experience with tools like MPLAB IDE, Proteus and Xilinx.Dominador Urpiano Jr
Dominador Urpiano JrDominador Urpiano Jr.
油
This document is a resume for Dominador G. Urpiano Jr. who graduated from Technological Institute of the Philippines with a BS in Electronics and Communications Engineering in 2015. It outlines his objective to establish an engineering career demonstrating his learning outcomes. It also lists his design projects, training, skills, affiliations and references.Praveen Kumar S S.docx(1)
Praveen Kumar S S.docx(1)Praveenkumar S S
油
This document is a resume for Praveen Kumar S S. It summarizes his professional experience in embedded systems and testing over 2 years, including projects involving GPS clocks, onboard satellite computers, RF LAN systems for satellites, and satellite tracking from a ground station. It also lists his education as a Bachelor of Engineering in Electronics and Communication and skills in areas like C programming, microcontrollers, MATLAB, and various simulation and development tools.Embedded Software Developer -- 8 months Exp
Embedded Software Developer -- 8 months Exppraveen kumar
油
I am working as Embedded software Developer from past 8 months in VJT Bangalore, PG in VLSI Design and Embedded System from Alpha college of Engg, Completed 5 months of course in "Advance Diploma in Embedded Development" from ISM Bangalore, and completed "RTL Verification using verilog" course from IEEE.AK_rai_06
AK_rai_06Ankit rai iit kharagpur
油
Ankit Kumar Rai is a Senior Engineer at Larsen & Toubro Ltd specializing in radar development. He has over 2 years of experience developing, simulating, and testing radar systems. His responsibilities include analyzing radar system parameters, designing antennas and RF components, and ensuring systems meet customer specifications. Some of his current projects include developing a low profile antenna array for satellite communication and a dual band telemetry system. He holds an M.Tech in RF and Microwave Engineering from IIT Kharagpur and a B.Tech in Electronics and Communication Engineering.Electronics engineer resume
Electronics engineer resumeMohammed Irshad S K
油
This document contains a summary of an electronics and communication engineer with 4 years of experience in embedded system design, programming, and testing. It includes work history from 2013 to present at Keltron Controls as a project engineer developing environmental and power panels and a towed array sensor system using technologies like Ethernet, FreeRTOS, and ARM Cortex-M3. It also includes experience from 2009 to 2011 as an engineer in research and development at Consyt Integrated Control System developing a data acquisition system for tomography applications using technologies like PIC24F, C30 Compiler, and USB.Lima Resume
Lima ResumeMichael Lima
油
Electrical Engineering Student seeking a full-time entry level position with a focus on Digital Hardware Design and Embedded Systems. Possess project experience in Robotics and internship experience with companies such as Embraer and Blackberry. Highly motivated and proactive with strong verbal and written communication skills.INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/IT
INPLANT TRAINING IN CHENNAI-EMBEDDED/ROBOTICS TRAINING-ECE/EEE/CSE/ITASHOKKUMAR RAMAR
油
The document describes an in-plant training program conducted for pre-final year students in various engineering fields including ECE, EEE, E&I, ICE, CSE, IT and Biomedical. The 30 hour program covers topics like electronics component identification, basic circuit assembly and soldering, Orcad circuit design software, embedded systems, microcontroller interfacing, sensors and sample project testing. A similar 20 hour program for CSE/IT and MCA students covers C and Visual Basic programming basics and hardware interfacing. The fee for the program is Rs. 1000 per student.ES_Resume
ES_ResumeSrinivaasa Reddy Mukku
油
Srinivasulu Mukku is seeking opportunities as an embedded and IoT developer with skills in C, C++, Python, Linux, and embedded systems. He has a Bachelor's degree in electrical engineering and experience working as a design and development engineer. His current internship project involves an RFID attendance system using an 8051 microcontroller. Mukku also completed an internship project involving an electronic lock authenticated by fingerprint or password that was built using an ARM microcontroller.Naveen Ravi - 1 year resume v2.0
Naveen Ravi - 1 year resume v2.0 Naveen Ravi
油
R. Naveen has 1 year of experience in embedded systems development at Qbitronics. He has skills in microcontrollers like 8051, PIC, and AVR, and software tools including Keil uVision, CCS Compiler, and MPLAB. His responsibilities include designing and developing embedded software applications, writing code according to standards, and supporting customers. He has a B.E. in Electronics and Communication Engineering from Karpagam University.Girish one year
Girish one yeargirish bb
油
- Girish B B has a M.Tech in Signal Processing from REVA ITM, Bangalore with expertise in signal processing concepts and advanced C programming. He has over 1.5 years of work experience.
- He currently works as a Trainee Engineer at Effent Technology where he optimized and tested an AAC audio decoder using C, Microsoft Visual Studio, and Eclipse.
- Prior to this, he completed an 8 month internship involving cell detection in liver disease images using MATLAB and SIMULINK.Suraj Resume
Suraj Resumesuraj jagadale
油
This document is a curriculum vitae that summarizes the career and qualifications of an applicant seeking a position as a Research, Design & Development Engineer. The applicant has 1.2 years of experience in embedded system development using microcontrollers and programming skills in Embedded-C. Their educational background includes a B.Tech in Electronics and Communication Technology. They have experience with microcontrollers, communication protocols, PCB design software, and simulation tools. Their most recent role involved embedded C programming, selecting microcontrollers, specifying system requirements, and providing client support for PIC-based tools.Similar to SwapnikC (20)
resume
resumesween krishna
油
Sweenkrishna is seeking a position in embedded systems. He has a Bachelor's degree in Electrical and Electronics Engineering and has worked as an embedded developer for over 2 years. His experience includes designing and developing embedded software and hardware, providing training, and completing projects for clients involving PIC and ARM microcontrollers. His areas of interest include embedded systems, digital electronics, VLSI, and programming languages like C, C++, and Java.Updated amit resume
Updated amit resumemohit rawat
油
- The document contains the resume of Amit Kaushik which summarizes his personal details, education qualifications, work experience and skills. It details his B.Tech degree in electronics and communication engineering and his current role as an FM SWITCH PACKET CORE ENGINEER at Ericsson. It also provides details of his previous work as an AM-NSS engineer at Nokia solution networks and internships. The resume lists his proficiency in technologies like MATLAB, Arduino, Raspberry Pi and programming languages C++ and C. It also outlines his achievements and projects completed.VINOD_KAMALAPUR_RESUME (1)
VINOD_KAMALAPUR_RESUME (1)vinod kamalapur
油
Vinod Kamalapur is seeking an opportunity as a product engineer with experience in image sensor validation. He has a B.E. in electronics and communication and is undergoing advanced training in design and verification. He has published a paper on designing complex multipliers using Vedic mathematics and has experience undertaking projects involving UART IP core verification, router design/verification, and implementing cryptographic algorithms on FPGAs. His skills include Verilog HDL, UVM methodology, and using EDA tools for design and verification.JitendraResume_22022016
JitendraResume_22022016Jitendra Rana
油
Jitendra Rana is a software engineer with 2 years of experience seeking a position in embedded systems. He has a strong background in C programming and experience developing Linux device drivers, specifically for CAN 2.0 implementation. He also has knowledge of wireless technologies like ZigBee and experience interfacing with RF modules. He holds a PG Diploma in Embedded Systems and has experience developing projects involving microcontrollers, wireless communication, and interfacing sensors.Naveen Narasimhaiah Resume
Naveen Narasimhaiah ResumeNaveen Narasimhaiah
油
Naveen Narasimhaiah is seeking a full-time position using his technical and analytical skills. He has a Master of Science in Electrical Engineering expected in August 2015 from the University of Missouri-Kansas City with a 3.9 GPA. His master's thesis focuses on reliable communications over LTE networks. He has internship experience in RF engineering and systems testing. Naveen also has experience as a student assistant providing technical support and troubleshooting at UMKC. He is proficient in programming languages like C/C++ and tools including MATLAB, LabVIEW, and Cadence.CV Rohith
CV RohithRohith Kumar
油
Rohith Kumar C has over 5 years of experience in testing electrical and electronic equipment for safety and reliability. He currently works as a Test Engineer at Electronics Test and Development Centre testing equipment according to Indian and international standards. His expertise includes safety testing, environmental simulation testing, and laboratory management. Rohith holds an M.Tech in Computer Application in Industrial Drives and a B.E. in Electronics and Communication Engineering.raghu inform n ES (1)
raghu inform n ES (1)raghu m
油
Raghavendra I Muragundi is seeking an opportunity that allows him to utilize his innovative skills and contribute value to a company's growth. He has a M-Tech degree in VLSI from REVA ITM Bangalore and a Bachelor's degree in Engineering from KLECET Chikodi. His technical skills include C, VHDL, Verilog, Cadance, Xilinx, Informatica tools, SQL, and he has experience in subjects like VLSI, embedded systems and control systems. He completed an apprenticeship at Bharat Electronics Limited where he worked on a BPSK project using VHDL codes. His M-Tech project involved faster matrix multiplication implementation and his BE project developedFFicili_Curriculum - v1.3 - 07092014 - ENG
FFicili_Curriculum - v1.3 - 07092014 - ENGFrancesco Ficili
油
Francesco Ficili's curriculum vitae is summarized in 3 sentences:
Francesco Ficili obtained degrees in electronic engineering and mechatronics engineering from Politecnico di Torino. He has worked as an electronic engineer developing data acquisition systems and on firmware for non-destructive testing applications. Ficili currently works as a consultant for Altran Italia and has published work on experimental characterization of ferromagnetic ropes.ABU JANDAL_CV
ABU JANDAL_CVabu Jandal
油
Abu Jandal is seeking a position applying his engineering skills. He has an M.Tech in control and instrumentation engineering from Jamia Millia Islamia with projects in energy efficient wireless sensor networks and energy aware multipath routing in WSNs. He has a B.Tech in electrical engineering from Jamia Millia Islamia with projects in developing a multi-touch table and a digital security lock. He has skills in Matlab, C++/C, Java, LabVIEW, and Windows platforms.Deepak Kumar Gautam
Deepak Kumar GautamDeepak Gautam
油
The document is a resume for Deepak Kumar Gautam. It summarizes his objective to gain a dynamic role in embedded computing and electronics. It outlines his work experience including as a technology evangelist and embedded technologies trainer. It also lists his qualifications including pursuing an M.Tech in embedded systems and B.Tech in electronics and communication. It details his projects covering areas like test case tools, nurse calling systems, and mobile controlled robots. It provides his skills and interests in areas such as programming, PCB design, and Linux. It highlights his activities and achievements which include organizing workshops and delivering seminars.AUK - CV WO Ref
AUK - CV WO RefAn脹l Ula KOAK
油
This document provides a summary of an individual's work experience and qualifications, including:
1. Recent work as an electronic engineer for their family company and previous internships in embedded systems and design.
2. Educational background with bachelor's and master's degrees in electrical engineering, including honors and exchange programs.
3. Relevant skills in areas such as FPGA, embedded systems, hardware/software design, programming languages, and projects involving IoT systems, image processing, and more.Cv atul kale_b.e(instrumentation and control)_dcs engineer
Cv atul kale_b.e(instrumentation and control)_dcs engineerATUL KALE
油
1. Kale Atul Arun provides his curriculum vitae, which details his work experience in process automation and DCS systems for various power plants and industrial facilities in India and abroad.
2. He has over 5 years of experience working with DCS platforms like ABB 800xA, HC800, and AC500 on projects in Indonesia, India, Tanzania, and other countries.
3. His responsibilities have included logic development, HMI programming, hardware installation, testing, commissioning, and more. He also provides details on his education and technical skills.Cv atul kale_b.e(instrumentation and control)_dcs engineer
Cv atul kale_b.e(instrumentation and control)_dcs engineerATUL KALE
油
1. Kale Atul Arun provides his curriculum vitae, which details his work experience in process automation and DCS systems for various power plants and industrial facilities in India and abroad.
2. He has over 5 years of experience working with DCS platforms like ABB 800xA, HC800, and AC500 on projects in Indonesia, India, Tanzania, and other countries.
3. His responsibilities have included logic development, HMI programming, hardware installation, testing, commissioning, and more. He also provides details on his education and technical skills.ResumeLinkedIn
ResumeLinkedInHarshita Shankar
油
Harshita Ravi Shankar is seeking a full-time opportunity in electrical and computer engineering. She has a Master's degree from Illinois Institute of Technology and a Bachelor's degree from Visvesvaraya Technological University. Her skills include VHDL, Verilog, CAD software, programming languages like C and C++, and ASIC/FPGA design flow. She has internship experience building a public transport ticketing system. Her academic projects include audio processing using time-frequency algorithms on an ARM processor and automatic test pattern generation using Python.Shayak Biswas_CV-2
Shayak Biswas_CV-2Shayak Biswas
油
Shayak Biswas is a software developer with over 4.7 years of experience developing applications for mobile and embedded devices. He holds a B.Tech in Electronics and Telecommunication from NIT Raipur with a 7.49 CGPA. His skills include programming languages like C and Java, and he has experience developing for platforms such as Android and Linux. He has worked at Samsung Research and Development Centre and Bosch, developing Bluetooth and ANT+ systems for Android devices and ECU software for automotive applications.CV-JH COETZEE-2013
CV-JH COETZEE-2013Kobus Coetzee
油
Kobus Coetzee provides his curriculum vitae, which details his personal information, education history, skills, work experience, projects, courses, interests and references. He holds a B Eng in Electronic Engineering from the University of Pretoria and has over 10 years of experience in software engineering and embedded systems development, currently working at Nanoteq as a software engineer and architect.Ravi Ranjan
Ravi RanjanRavi Ranjan
油
Ravi Ranjan is seeking a position that utilizes his IT and networking skills. He has over 10 years of experience in roles such as IT analyst, member technical staff, and engineer. He is skilled in SDN, routing protocols, security protocols, automation tools, and scripting languages. His experience includes projects in SDN testing, Cisco platform and feature testing, firewall service module testing, and telecom network implementation and maintenance. He holds a Bachelor's degree in electronics and communication engineering.Pradeep c prasad
Pradeep c prasadPRADEEP C PRASAD
油
Pradeep C Prasad is seeking a challenging position in a reputable organization to contribute his skills and abilities. He has a M.S. in Electrical and Computer Engineering from the University of Arizona graduating in June 2016. He has experience programming in C, C++, Java, and VHDL. His projects include developing a DNS server using BIND software and designing a new cache architecture. He completed an undergraduate final year project establishing a satellite communication link for ISRO. Pradeep has strengths in fields like computer architecture, embedded systems, hardware design and logic design.Faizan CV_ 2016FF
Faizan CV_ 2016FFFaizan Mehmood
油
Faizan Mehmood has a M.S. in Electrical Power Systems from the University of Engineering & Technology and is currently working as a Senior Research Executive at Axproz in Islamabad, Pakistan. He has over 5 years of experience in electrical engineering roles focusing on power systems, embedded systems, and research. His educational background and work experience demonstrate strong skills in electrical engineering, programming, research, and project management.Resume_balmukund
Resume_balmukundbal mukund dubey
油
Balmukund Dubey is seeking a challenging career that provides opportunities for analytical thinking and learning. He has a B.E. in Electronics and Communication from Government Engineering College-DAHOD. He has over 1.4 years of experience in validation of automotive electronics and testing of software. His skills include protocols like CAN, LIN, FlexRay, and tools like CANoe, CAPL. He is currently working as a Trainee Software Engineer at DELPHI AUTOMOTIVES PVT. LTD. and has experience with projects involving CMA and SPA architectures.SwapnikC
- 1. Chimalamarri Swapnik H-1203, Purva Skywood Apartments, Haralur Road, Bangalore, 560102 Phone Number: +919632081818 Email-id: swapnik001@e.ntu.edu.sg OBJECTIVE To obtain a full time position at a company that allows me to further my knowledge and skill set in the field Applications Engineering and Firmware Engineering. EDUCATION Master of Science (M.Sc) Integrated Circuit Design 2013 - 2015 Joint Degree - Nanyang Technological University, Singapore - Technical University of Munich. Passed with merit with TUM CAP of 1.9 (1 being lowest) Bachelor of Technology (B.Tech) Electronics and Communications 2009-13 Jawaharlal Nehru Technological University, Kakinada. Graduated, First class with distinction with 80% of marks. MASTER THESIS November February 2015 Title: Automation of Test and Measurement Instrumentation for Post Silicon Validation Summary: Automation of T&M Instruments using IEEE 488.2 (SCPI) and IEEE 488 (GPIB) and build Inter-Device communication scripts using Python for unifying JTAG and C2 Debuggers and use VISA and IVI architectures to expedite the process of Post Silicon Validation. BACHELOR THESIS January April 2013 Title: Low-Power Clock Branch Sharing Double-Edge Triggered Flip-Flop. Summary: A technique, which employs a clock branch-sharing scheme to reduce the number of clocked transistors in the design, implemented using Tanner EDA tools. INTERNSHIP Silicon Laboratories, Singapore Applications Engineering July February 2015 Title: Design of Post Silicon Validation Firmware for MCU and Test Bench equip- ment using Python. Summary: Create post silicon validation packages using python to create a unified test bench setup so that the time for validation of the target MCU is significantly re- duced. The unified Test Bench Setup includes debugger
- 2. Title: Electrical Validation of MFI (Made for i-devices) Audio Bridge Summary: Validation different firmware versions of Silicon Labs proprietary MFI Audio bridge and perform various audio (THD, Noise, etc.) and electrical tests and give timely reports to the firmware team. Also contributed to Hack A Gecko, a Silicon Labs internal program where the em- ployees create different projects using Silicon Labs EFM 32 Gecko microcontroller. PROJECTS January 2014 Nanyang Technological University, Singapore Title: Warehouse Maintenance Robot. Summary: This project is based on Atmega 328 MCU, building a robot, which is controlled by a radio transmitter used to read the inventory items using RFID and log the data onto a computer using Xbee transceiver. (C programming) April 2012 Title: Home Automation using Python. Summary: Connecting devices at home using Python server and Twitter. Controlling the required devices using Atmega 328 MCU, which are connected to a PC through Xbee transceiver. (Python and C programming) July 2011 Title: Ultrasonic range finder using 8051 Summary: This project as the name says, is an application to measure distance of an object. It uses an ultrasonic transducer module HC-SR04 to measure the distance and the controller AT89S51 to make the necessary processing. (Assembly Language) SKILLS C Python Assembly language Perl TCL scripting JTAG/C2 debuggers VISA, IVI Architectures Microcontroller Firmware Driver Development REFERENCES Mr. Kok Hong Soh, Manager, Application Engineering, Silicon Laboratories, Sin- gapore. Kokhong.soh@silabs.com , +65 6511 6409 Assoc Prof Siek Liter (elsiek@ntu.edu.sg) Circuits and Systems Division, School of Electrical and Electronic Engineering, Nanyang Technological University.