More Related Content
What's hot (20)
Similar to 1Erwin N De La Rosa jan2016CV (20)
1Erwin N De La Rosa jan2016CV
- 1. erwinCVyr82013 1 PERSONAL INFORMATION Nationality : Filipino Email Address : erwindlr@yahoo.com Address : Avida Tower 4 Unit 4L Contact no. : +632 5086851 (home) San Lazaro, Santa Cruz +63916 2927389 (hp) Manila, Philippines 1014 +63917 8552320 (hp) Date of Birth : 26 May 1962 Civil Status : Married PassportNo.: EB7151683 SUMMARY OF JOB QUALIFICATION  Fabrication / Construction of Oil and Gas Platforms, Jackets and GBS –18 years  Fabrications of General Industries like Power plant and high rise building – 7 years  Consulting for Civil and Structural – 2 years  Government Engineering Office – 2 years EXPERIENCE Dec 2013 – to March 2015 Fabrication Structural Engineer, Samkang M&T Fabrication Yard, Goseong, South Korea The main key project activities involved: . 6-legged CKX Jacket (wt.=7,000MT) – Carigali Hess Booster Compression . Turret M6 Gantry Structure for Shell Prelude Floating LNG Project Work Description  Assign in fabrication yard to supervise/coordinate all relevant to structural aspect of the job.  Engage in review drawings for accurateness and constructability, check and review fabrication documents, procedures and drawings and ensure adequacy and compliance to standards and specification issued thereto.  Prepare erection sequence and do lifting check for allowable crane capacity, lifting radius and clearances. Prepare slings and shackles allocations.  Design lifting padeyes, stoppers and lifting beams.  Study and prepare pile loadout sequence including lifting analysis.  Oversee the preparation and fabrication of steel structure as per drawings and site instruction, and oversee execution/installation of steel structure.  Ensure all structural engineering issue and site queries (TQ’s) are timely resolve and properly monitored. Raise deviation and change request if necessary.  Review specific heavy lift procedure & roll-up for compliance to standard and specification for safe and successful lifting operation. Erwin N. de la Rosa Structural Engineer Fabrication/Construction Engineer RESUME
- 2. erwinCVyr82013 2 Nov 2010 – Apr 2013  Check calculations (i.e. temporary supports, lifting, weighing, roll-up, loadout, etc).  Engage in preparation of Lifting, Weighing, Weighing Report and Loadout Procedure.  Coordinate with other discipline engineers and site inspection team and ensure fabrication works are in line with applicable quality and technical standards, contractual agreements and company instruction.  Help implement industry HSE best practice for fabrication with zero LTI target.  Help to ensure that records and final handover documentation for Red-line mark-ups and As- built are properly planned, compiled and completed.  Coordinate with Client on all technical matters and participate in project review, meetings and quality audits. Fabrication Structural Engineer, Daewoo International Corp. Shenzhen China, South Korea& Myanmar The main key projects activities involved: . 8-legged SHP Jacket (wt.=22,800MT) . SHP Topsides-Integrated drilling, production & processing w/ 215 pax LQ (wt=30,000MT w/ DSF) On support to the Projects activities involved: . Subsea manifold and 4 subsea wellheads . Offshore Pipeline & Flowline, Subsea Control System / Umbilical / Jumpers . Onshore Gas Terminal & Supply Base Work Description  Assign in fabrication yard as Project Management Team supervising EPCIC contractor with regards/relevant to structural aspect of the job.  Review drawings for accurateness and constructability, check and review fabrication documents, procedures and drawings and ensure adequacy and compliance to standards and specification issued thereto.  Oversee the preparation and fabrication of steel structure as per drawings and site instruction, and oversee execution/installation of steel structure.  Monitor daily structural progress of contractors and advice constructor of any possible work method improvements which could be implemented to improve structural fabrication work and keeping to the schedule dates.  Help implement industry HSE best practice for structural fabrication (safety).  Ensure all structural engineering issue and site queries (TQ’s) are timely resolve and properly monitored. Raise deviation and change request if necessary.  Review specific heavy lift procedure for compliance to standard and specification for safe and successful lifting operation.  Check calculations done by the fabricator and sub-contractors (i.e. temporary supports, lifting, weighing, loadout, etc).  Coordinate with other discipline engineers and site inspection team and ensure fabrication works are in line with applicable quality and technical standards, contractual agreements and company instruction.  Review documents and procedure for Weighing, Loadout, outfittings and offshore installations.  Coordinate with Marine Warranty Surveyor (MWS) relating to document review. Engage in MWS planning and coordination for barge inspection and MWS attendance to loadout, sailaway and offshore installation including subsea structures.  Coordinate with Offshore Installation Contractor (OIC) and review procedure for offshore activities including preparation for Floatover or lifting installation.  Review/check and coordinate with Fabricator and Offshore installation Contractor with the preparation of outfitting works and loadout preparation.
- 3. erwinCVyr82013 3  Support in the preparation of Job Cards and work packs for offshore hook-up activities for structural.  Help to ensure that records and final handover documentation for As-built are properly planned, compiled and completed.  Help review and coordinate civil and structural documents/activities on OGT (Onshore Gas Terminal). Jul 2009 – Oct 2010 Lead Structural Engineer, MMHE-Technip JV,Kiyanly Turkmenistan The main key projects activities involved (during hired under MMHE-Technip JV): PETRONAS Turkmenistan Project - MCR-A Gravity Base Structure (GBS) 7450MT - MCR-A Topside (Integrated PF) – 5500MT Work Description  Assign in fabrication yard to supervise/coordinate all relevant to structural aspect of the job.  Review drawings for accurateness and constructability, check and review fabrication documents, procedures and drawings and ensure adequacy and compliance to standards and specification issued thereto.  Prepare erection sequence and do lifting check for allowable crane capacity, lifting radius and clearances. Prepare slings and shackles allocations.  Design lifting padeyes, stoppers and lifting beams.  Ensure all structural engineering issue and site queries (TQ’s) are timely resolve and properly monitored. Raise deviation and change request if necessary.  Review specific heavy lift procedure for compliance to standard and specification for safe and successful lifting operation.  Check calculations done by the fabricator and sub-contractors (i.e. temporary supports, lifting, weighing, loadout, etc).  Coordinate with other discipline engineers and site inspection team and ensure fabrication works are in line with applicable quality and technical standards, contractual agreements and company instruction.  Review documents and procedure for Weighing, Loadout, Ballasting, outfittings and offshore installations.  Coordinate with the consultant/Offshore Installation Contractors/Hook-up and Commissioning for various structural issues.  Coordinate with Marine Warranty Surveyor (MWS) relating to document review. Jan 2007 – Jun 2009 Client Structural Engineer, Sarawak Shell Berhad (SSB) Miri Sarawak Malaysia The main key projects activities involved (during hired under Sarawak Shell Berhad): . F13E(SC)DR-A Jacket . SCDR-A Jacket and Topside (Drilling PF) . CO2 Blending Project . Pre-drill and Post drill Activities for F13W, F13E, SCDR-A Work Description  Assign in fabrication yard to supervise/coordinate all relevant to structural aspect of the job.
- 4. erwinCVyr82013 4  Review drawings for accurateness and constructability, check and review fabrication documents, procedures and drawings and ensure adequacy and compliance to standards and specification issued thereto.  Ensure all structural engineering issue and site queries (TQ’s) are timely resolve and properly monitored. Raise deviation and change request if necessary.  Review specific heavy lift procedure for compliance to standard and specification for safe and successful lifting operation.  Check calculations done by the fabricator and sub-contractors (i.e. temporary supports, lifting, weighing, loadout, etc).  Coordinate with other discipline engineers and site inspection team and ensure fabrication works are in line with applicable quality and technical standards, contractual agreements and company instruction.  Review documents and procedure for Weighing, Loadout, Ballasting, outfittings and offshore installations.  Coordinate with the consultant/Offshore Installation Contractors/Hook-up and Commissioning for various structural issues.  Coordinate with Marine Warranty Surveyor (MWS) relating to document review. Engage in MWS planning and coordination for barge inspection and MWS attendance to loadout, sailaway and offshore installation.  Engage in planning, scheduling and technical evaluation. Participate in HAZID and Interface coordination meetings.  Oversee the preparation and execution of the work and to ensure that the work is done as per approved drawing and specification issued thereto.  Review/check and coordinate with Fabricator and Offshore installation Contractor with the preparation of outfitting works and loadout preparation.  Support in the preparation of Job Cards and work packs for offshore hook-up activities for structural.  Assign in offshore for technical support during offshore installation of Jacket and Topside and coordinate with MWS, Fugro survey and OIC.  Help to ensure that records and final handover documentation for As-built are properly planned, compiled and completed.  (SSB term) Structural support in pre-drill and post drill activities and attend IPOP. Jul 1996– Nov 2006 Unimetsu Consultancy and Engineering Sdn. Bhd., Kuala Lumpur Malaysia (Manpower Supply) I’ve been SECONDED OR SUPPLIED TO THE FOLLOWING COMPANY: Jan 2005 – Nov 2006 Lead Structural Engineer, HL Engineering Sdn. Bhd. (Fabrication Yard), Lumut Perak Malaysia The main key projects activities involved: . F13E(SC)DR-A & SCDR-A Jacket (before joining SSB) . BAKP-B Integrated Compression Module of PCSB/KHI . BARAM South Development Project Topside (Wellhead PF) & Jacket . E11V-B Jacket and Vent Tower of SSB Work Description:  Assign in fabrication yard to coordinates all relevant to structural aspect of the job.  Review and check client drawings. Raise drawing clarification and coordinate with the client/consultant.
- 5. erwinCVyr82013 5  Engage in engineering planning, scheduling and technical evaluation.  Prefer, monitor and control detailed engineering deliverables.  Prefer and oversee the preparation of Material Take-off (MTO) and then raise Purchase Requisition (PR) and liaise with the procurement for the materials and services required in the execution of the work.  Prefer Technical Bid Evaluation (TBE) and response to TBE clarifications from the vendors.  Calculate and design Fabrication supports and foundation analysis. Engage in lifting analysis and procedure and preparation of weighing and loadout procedures.  Supervise and give instructions to engineers and designer with regards to procedures, weight control report and shop drawings.  Perform site and source inspection for materials supplied by vendor and subcontractor.  Coordinate and monitor Site Query and Engineering Revision and liaised with other personnel involved in the project.  Coordinate and assist project management team in technical evaluation and provide assistance on all design matters.  Perform other related duties such asengineering assistance to production and field assistance on fabrication. Jul 2000 – Nov 2004 Lead Structural Engineer, DSD (DilingerStahlbau GmbH) Construction Sdn. Bhd., Kuala Lumpur Malaysia The main key projects activities involved: . Manjung Power Plant in Perak, Malaysia(About 25,000 metric ton of steel) . Achenbach Crane project for Pinang Shipyard &Eng’g. . Glycol Skid, Air Coller . DSD Warehouse and in-house projects Work Description:  Engage in local structural analysis and perform static calculations / design check of various members and connections. Do equipment skid design for in-place analysis, transportation and lifting analysis. Also engage in coordinating with our subcontractors, fabricators and site erectors.  Develop structural design drawings using AutoCad.  Checking of shop drawings . Review shop drawings against basic design drawings  Drawing/Technical Enquiries . Review drawing queries from Suppliers . Provide response/solution to queries like material substitution, connection, etc. . Coordination with relevant Supplier  Engage and assign in site during construction. Mar 1996 – Jun 2000 Mar 1994 – Mar 1995 Engineer/Lead Structural, Malaysia Shipyard and Engineering, Pasir Gudang (Fabrication Yard), Johor Malaysia The main key projects activities involved:  ESSO Production Malaysia Inc. . Sefigi-F and Raya-A Integrated Deck  PETRONAS CARIGALI Sdn. Bhd. . Dulang B (Water Injection Facility & Gas Compression) . Anding Topside and Jacket . Resak Bridge and Jacket
- 6. erwinCVyr82013 6 . ANDR-A Jacket  SARAWAK SHELL Berhard . F23 Jacket, MSF and Topside Work Description:  Perform analysis and design work in full compliance to client's specification, relevant codes and requirements. Calculate and design Fabrication supports and foundation analysis. Engage in lifting analysis and procedure and preparation of weighing and loadout procedures.  Review AFC drawings. Raise drawing clarification and coordinate with the client/consultant.  Engage in engineering planning, scheduling and technical evaluation.  Prefer, monitor and control detailed engineering deliverables.  Prefer and oversee the preparation of Material Take-off (MTO) and then raise Purchase Requisition (PR) and liaise with the procurement for the materials and services required in the execution of the work.  Prefer Technical Bid Evaluation (TBE) and response to TBE clarifications from the vendors.  Supervise and give instructions to engineers and designer with regards to procedures, weight control report and shop drawings.  Perform site and source inspection for materials supplied by vendor and subcontractor.  Coordinate and monitor Site Query and Engineering Revision and liaised with other personnel involved in the project.  Coordinate and assist project management team in technical evaluation and provide assistance on all design matters.  Perform other related duties such as engineering assistance to production and field assistance on fabrication. Apr 1995 – Mar 1996 Structural Engineer, SAMSUNG HEAVY INDUSTRIES/ CONST., Kuala Lumpur Malaysia The main key project activities involved:  88-Floor Petronas Twin Tower Kuala Lumpur, Malaysia. Work Description: Structural engineer in charge of undertaking structural calculations and design works. Review and check structural aspect of the job and responsible for completeness and accurateness of shop drawings. Liaise with clients, consultants and other disciplines on all technical aspects of the projects. Also engage in site supervision and do necessary modifications if required and coordinate with the subcontractors to ensure proper and safe execution of the job. Conduct site visit/coordination with steel fabricators during fabrication and pre-erections. Assigns draftsman to prepare erection and fabrication drawings and transmit drawings for approval and for fabrication. Do other structural issues and coordinate with the main office in Samsung Heavy Industries in South Korea. Jun 1991 – Mar 1993 Design Engineer (Civil/ Structural), SAUDI Consolidated Engineering Co. (Khatib&Alami) Al Khobar, K.S.A. (Consulting Firm of Saudi Aramco). The main key projects activities involved:  Various Aramco projects (All Aramco Oil Co. Projects). Work Description:
- 7. erwinCVyr82013 7 Receives and studies job orders and pertinent documents from Project Engineer. Responsible for the analysis and design of proposed project based on proponent's Design Basis Scoping Paper (DBSP) and other related proponent's engineering standards. Performed conceptual and final structural analysis and design of steel and concrete building structures and foundations for the pre-engineered steel buildings, Involved in the analysis and design of concrete circular and rectangular tanks for sewage treatment plant. Also engage in analysis and design of retaining walls, pipe supports and anchor blocks for oil and water lines. Supervising and checking of detailed drafting works done. Also engage in site inspection to check existing condition of proposed site or structures or on-going projects, and coordinate with the client and contractor representatives. Mar 1988 – Mar 1990 Designer/ Detailing Checker, BUTLER - SAUDI BUILDING SYSTEMS, Jeddah Kingdom of Saudi Arabia The main key projects activities involved:  Saudi Ductile Iron Pipe factory-Dammam KSA  ARAMCO school building - Dammam KSA  Various standard and custom Butler buildings. Work Description: Receives and studies design/customers drawings and specifications. Take notes of the important facts and provisions such as material specifications, surface preparations, paint, testing and other items. Check/details all requirements for fabrication and erection in accordance with company standard operating procedures. Prepare shipping lists and requisitions coordinated with the project engineer for proper implementation and completeness of the projects. Draw fabrication and erection drawing. Represent in shop/field investigation and inspection. Apr 1986 – Mar 1988 Detailer/ Detailing Checker, ATLANTIC GULF & PACIFIC CO. OF MANILA(AG&P) Batangas Marine & Fabrication Yard Batangas, Philippines / GRANDSPAN The main key projects activities involved:  SNAMPROGETTI - Oil and Natural Gas Corp. (Oil Platform for India).  Sumitomo Heavy Industries Inc. - structural steel frame for one electrostatic precipitator (China).  NAURU Center Building - structural steel frame for one 27 - storey building in Makati, Philippines  GMA-7 - One Unit 777 feet high self-supporting antennae tower  Pipe supports for Caltex Philippines  Cold storage building for pacific air force Work Description: Receives and studies design/customers drawings and specifications. Coordinates with section head and take notes of the important facts and provisions such as material specifications, surface preparations, paint, testing and other items. Check/details all requirements for fabrication and erection in accordance with company standard operating procedures. Prepare shipping lists and coordinate with the project engineer for proper implementation and
- 8. erwinCVyr82013 8 completeness of the projects. Draw fabrication and erection drawing. Represent in shop/field investigation and inspection. Do material Take-off and estimation. May 1984 – Apr 1986 Civil Engineer-1 / Field Engineer, MARINDUQUE PROVINCIAL ENGINEERS OFFICE - Boac, Marinduque, Philippines The main key projects activities involved:  Various Government Projects Work Description: Assign as Project Engineer/Inspector to the construction of buildings, basketball courts and roads. Coordinates with Senior Engineer prior to construction, manpower status, quality of works and other miscellaneous works to be done on the site. Involved in survey and plot grade elevation for the proposed roads. Prepare and submit reports on jobs in progress. Inspect that all works are inaccordance with the plans and specifications issued in connection thereto. EDUCATION Registered Civil Engineer (Board Exam Rating 88.3%) Mapua Institute of Technology (Philippines) (1979 - 1984) SOFTWARE KNOWLEDGE Structural Analysis STAAD.Pro SACS (basic) AutoCad Microsoft Word and Excel LANGUAGE PROFICIENCY Tagalog, English