The document describes a proposal for a line maze solver robot project. It includes an introduction to line mazes, the objectives of the project to build an autonomous robot that can solve a line maze, and the key components and methodology. The robot will use 6 light sensors to detect the black line on a white surface and make decisions at intersections. It will use an Arduino microcontroller to process sensor input and control the motors. The first run will record wrong turns to avoid on the second run when it can solve the maze quickly.
The document describes an autonomous maze solving robot project. The robot uses three ultrasonic sensors to detect the maze walls and two servo motors controlled by a microcontroller to navigate. The microcontroller receives distance readings from the sensors and instructs the motor driver which direction to move the motors to avoid obstacles as it solves the maze. Components include an Arduino, ultrasonic sensors, servo motors, batteries and other basic electronics. The robot is programmed to use an obstacle avoidance algorithm to autonomously solve mazes without human interference.
The document describes the design of a line following robot. It will use eight optical sensors spaced half an inch apart to follow black lines on a white surface. A two-wheeled configuration propelled by DC motors is selected. The robot will be tested by passing it over sample tracks to evaluate its ability to navigate turns and intersections. Its performance on tracks of varying difficulty will demonstrate how the design can accomplish autonomous navigation and complete reconnaissance missions.
The document provides an introduction to robotics and line path followers. It discusses what robots are and their common applications. Robots are mechanical devices that perform automated tasks under direct or indirect human control. They are used for dangerous, difficult, repetitive or dull tasks. The document also describes different types of mobile robots, including rolling and walking robots. It then discusses the basic components, working and circuit diagram of a line path follower robot. Key sensors used in robots like IR sensors and their operating methods of through-beam, reflex and proximity detection are explained.
Autonomous robotics based on simplesensor inputs.sathish sak
?
This document discusses autonomous robotics based on simple sensor inputs. It describes a project to program a robot using PIC chips so that it utilizes infrared sensors and stepper motors to follow a boundary wall within an enclosed environment. It provides details on various sensor technologies that could be used, including ultrasonic sensors, touch sensors, infrared proximity sensors, and sound sensors. It also discusses the robot structure, overview of controlling components, and sensory organs.
Robotics is a branch of science that deals with Mechanical, Electrical and Software fields. Robots are the machines that are used in our day-to-day to life to reduce men power and work accurately without any distortions. Robots can be classified into two different sections basing upon their skills as Automated and Manual. ?Obstacle detector is a Automated robot which itself recognizes the obstacle in its path and moves in free direction. Robot detects the obstacle by using two IR Sensors placed in front.
??? ?????????The IR sensors are placed on left and right side of the robot through which continuous Infrared radiation is emitted for detection of obstacles in the path. These IR Sensors are connected to a controlling element AT89c51 ?c. When a obstacle is placed in the path of robot IR beam is reflected to the sensor from the obstacle. On detecting obstacle in the path sensor sends 0 volts to ?c. This 0 voltage is detected by Microcontroller which avoids the obstacle by taking left or right turn. Similarly if the sensor sends +5v to Microcontroller, the Microcontroller assumes it as clear path and makes the robot to move in straight.
????????? Two motors namely right motor and left motor are connected to Motor driver IC (L293D). L293D is interface with Microcontroller. Microcontroller sends logic 0 & logic 1 as per the programming to driver IC which makes motors to rotate in clockwise and anticlockwise direction. Wheels attached to the motors rotate accordingly with the motor shaft causing in the moment of the robot by wheels. In front portion of the robot a free wheel is attached to move the robot easily in any direction as per the requirement.
??? A 12Volts DC battery is attached to the circuit. As the microcontroller and sensors requires only 5v, set of resistors and capacitors are used to supply 5v DC to them. Power Management System is not maintained in the circuit as the battery can be removed after the usage of robot. So it does not cause any loss in the power of battery. ??? ??? ??
??? This type of robots has multiple applications in various fields. They can be used to know the strength of the opposite army in defense system. They can be used as floor and wall cleaners. They are used in automated GPS vehicles to calculate the moment of the vehicle overhead. These robots are easy to construct and ?cheaper in cost with long durability.
Obstacle Avoiding robot is a self thinking robot which can take decisions itself using programmed brain without any guidance from human beings. In our Project we use Infrared to sense obstacles and take movements accordingly. Our Project
mainly used in military application, small toys and also used in mines by increasing IR sensors.
This PPT gives information about:
1. Introduction to Architecture and features of 8051 Microcontrollers..
2. Specifications (with package detail), Instruction set / Bus architecture, RAM, FLASH, UART and other peripherals, Interrupts, timer, Counters,..
3. Software: Writing C programs, Compiling, Linking and Simulating these programs, bootloader, burning the hex file in Rom of Microcontroller.
The document describes an autonomous hazmat cleanup robot project created by engineering students. The robot uses sensors like an infrared sensor, color sensor, and electromagnet to identify and pick up hazardous materials and parts. It was designed to operate autonomously in an industrial building by communicating with another robot to transfer collected objects. The robot is powered by batteries and controlled with an Arduino microcontroller. Tests were performed on the sensors and electromagnet to ensure proper functionality.
This document describes a mobile pick and place robot. It discusses the main components of the robot including arms, end effectors, drive mechanism, controller and base. It also describes the application of the robot in materials handling and industrial uses. The advantages are speed, accuracy, production increases, reliability and flexibility. Future applications discussed include coal mining, military operations, garbage collection and more.
This is a full report of my project in Level 3 Term 1. The project was basically a self-driven vehicle capable of localizing itself in a grid and planning a path between two nodes. It can avoid particular nodes and plan path between two allowed nodes. Flood Fill Algorithm will be used for finding the path between two allowed nodes. The vehicle is also capable of transferring blocks from one node to another. In fact, this vehicle is a prototype of a self-driven vehicle capable of transporting passengers and it can also be used in industries to transfer different items from one place to another.
PC-based mobile robot navigation sytemANKIT SURATI
?
The document describes the design and components of a PC-based mobile robot for navigation. It uses a vision system with image processing and feature matching to navigate. A fuzzy logic controller computes the speed and angular speed needed by the two motors. An obstacle avoidance algorithm detects obstacles using pixel appearance differences. The robot is powered by a 12V battery and controlled through a software interface on a PC. Testing showed the fuzzy controller could achieve desired turns to navigate autonomously.
This Presentation Of CyberLab explains the basic concept of robotics for school presentation and for individuals to explain the basic concept of Robotics that what is a robot and how it works and a little bit description about history of Robotics
The document outlines the design of a snake robot with the following key points:
1. It proposes designing a snake robot without wheels that uses 8 servo motors and an Arduino microcontroller for locomotion on rough terrain.
2. The robot will be 3D modeled and simulated in MATLAB and Solidworks before hardware implementation.
3. The aims are to study robot kinematics and mechanics, implement hardware and software, and understand locomotion to move like a snake.
4. Expected outcomes include uses for the robot in industries like inspection, rescue missions where it can access hard to reach places, and for military surveillance.
An autonomous robot that will roam in malls and will scan product shelves and record its status (whether empty or not) using arduino microcontroller and labview software.
This document describes a robot project that uses a VU meter to track sound intensity levels in real-time. The robot uses a microcontroller, electret microphone, amplifier circuit, and LCD display to traverse an area on a virtual grid and find the highest sound intensity. It measures sound values at grid points and stores them in an array. The robot follows algorithms to navigate the grid, return to origin, and navigate to points of highest/lowest sound. Potential extensions using MATLAB graphical interface and other sensors are proposed.
Robotic technology has evolved from early concepts of robots in literature to modern applications. Robots are programmable machines designed to perform tasks automatically. They consist of mechanical parts, sensors to perceive the environment, processors to make decisions, and effectors to manipulate objects. Key events included the coining of the term "robot" in 1920 and "robotics" in the 1940s. Isaac Asimov proposed three laws of robotics to ensure robots do not harm humans. Modern robots are used for industrial manufacturing, medical procedures, space exploration, military applications, and more. They allow tasks to be performed quickly, consistently and in hazardous environments.
This document provides a summary of the system design for an autonomous robot. It describes the hardware components available including Lego Mindstorms kits with sensors, motors and structural parts. It also describes the available software tools and programming languages. The document outlines the system model, software and hardware capabilities and compatibility. It details the reusable components from previous projects and the planned software and mechanical structures. It explains the coordinate system, localization, navigation and other methodologies to be used.
International Journal of Computational Engineering Research (IJCER) ijceronline
?
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
This document outlines the design of a tour guide robot for the Chambers Technology Center building. It includes sections on the system design, hardware and software research, project development, justifications for design choices, test results, conclusions, applications, lessons learned, and future improvements. The robot uses sensors and microcontrollers to navigate autonomously around obstacles while providing verbal descriptions of points of interest on its tour route. Hardware includes ultrasonic sensors for obstacle avoidance, a compass sensor for navigation, and a Raspberry Pi for voice recognition and speech. Software includes algorithms for navigation and the Voicecommand program. The team developed the system over the semester and tested its performance.
Industrial robots are general purpose machines that can perform tasks faster and continuously like humans but without needs for pay, food, or breaks. They have evolved from early prototypes in the 1940s-1960s to become multifunctional manipulators used for tasks that are dangerous, repetitive, or difficult for humans. Robots are classified and their movements controlled through various joint and drive systems along with sensors to coordinate their operations in industrial applications like materials handling, processing, and assembly.
This document describes a line following robot project created by students at the Shri Govindram Seksaria Institute of Technology and Science Indore. The robot uses 3 IR sensor pairs and 2 motors to follow a black line on a white surface. It works by using the IR sensors to detect the line and send signals to the motor control circuitry, which instructs the motors to move the robot forward or turn as needed to stay on the line. The document discusses the components, working model, block diagram, applications and conclusions of the project. It proposes areas for future work, such as using a microcontroller and color sensors to add obstacle avoidance and other capabilities to the robot.
The wireless bomb disposal robot uses a control application to remotely control the robot via wireless technology. The robot has a base with wheels, a robotic arm, and a camera for video feedback. The control application sends signals to the microcontroller on the robot which directs the base motors and arm motors. The robot provides safety for bomb disposal squads by allowing remote inspection and manipulation of suspicious objects. Potential improvements include a more compact, quickly moving design with improved reliability.
Robots are machines that can perform tasks in place of humans. They are used in dangerous environments like handling radioactive materials or in space exploration where humans cannot survive. Robots have replaced humans in performing repetitive and dangerous tasks. This is done to eliminate human operations in hazardous conditions, save labor costs, and increase production speed in industries. Servo motors are used to control the precise movement of robots. Microcontrollers help connect robots to WiFi to enable remote operation and control over networks. Industrial robots are used widely in manufacturing sectors like automotive, paper, chemical and other industries.
This document provides an overview of robotics and artificial intelligence. It defines robotics as the science and technology of robots, their design, manufacture, and application. It discusses the history and development of robots from early designs by Leonardo da Vinci to modern industrial robots. The document also describes different types of robots including pick and place robots, continuous path control robots, and sensory robots. It outlines applications of robots in areas like manufacturing, space exploration, agriculture, and more. Finally, it introduces artificial intelligence concepts like autonomous agents and behavior engineering and provides examples of AI robots like SPOT, Fresh Kitty, and the humanoid robot COG.
Backstage Software Templates for Java DevelopersMarkus Eisele
?
As a Java developer you might have a hard time accepting the limitations that you feel being introduced into your development cycles. Let's look at the positives and learn everything important to know to turn Backstag's software templates into a helpful tool you can use to elevate the platform experience for all developers.
More Related Content
Similar to 2015_1009_Line following - Braitenberg, robot examples.ppt (20)
This PPT gives information about:
1. Introduction to Architecture and features of 8051 Microcontrollers..
2. Specifications (with package detail), Instruction set / Bus architecture, RAM, FLASH, UART and other peripherals, Interrupts, timer, Counters,..
3. Software: Writing C programs, Compiling, Linking and Simulating these programs, bootloader, burning the hex file in Rom of Microcontroller.
The document describes an autonomous hazmat cleanup robot project created by engineering students. The robot uses sensors like an infrared sensor, color sensor, and electromagnet to identify and pick up hazardous materials and parts. It was designed to operate autonomously in an industrial building by communicating with another robot to transfer collected objects. The robot is powered by batteries and controlled with an Arduino microcontroller. Tests were performed on the sensors and electromagnet to ensure proper functionality.
This document describes a mobile pick and place robot. It discusses the main components of the robot including arms, end effectors, drive mechanism, controller and base. It also describes the application of the robot in materials handling and industrial uses. The advantages are speed, accuracy, production increases, reliability and flexibility. Future applications discussed include coal mining, military operations, garbage collection and more.
This is a full report of my project in Level 3 Term 1. The project was basically a self-driven vehicle capable of localizing itself in a grid and planning a path between two nodes. It can avoid particular nodes and plan path between two allowed nodes. Flood Fill Algorithm will be used for finding the path between two allowed nodes. The vehicle is also capable of transferring blocks from one node to another. In fact, this vehicle is a prototype of a self-driven vehicle capable of transporting passengers and it can also be used in industries to transfer different items from one place to another.
PC-based mobile robot navigation sytemANKIT SURATI
?
The document describes the design and components of a PC-based mobile robot for navigation. It uses a vision system with image processing and feature matching to navigate. A fuzzy logic controller computes the speed and angular speed needed by the two motors. An obstacle avoidance algorithm detects obstacles using pixel appearance differences. The robot is powered by a 12V battery and controlled through a software interface on a PC. Testing showed the fuzzy controller could achieve desired turns to navigate autonomously.
This Presentation Of CyberLab explains the basic concept of robotics for school presentation and for individuals to explain the basic concept of Robotics that what is a robot and how it works and a little bit description about history of Robotics
The document outlines the design of a snake robot with the following key points:
1. It proposes designing a snake robot without wheels that uses 8 servo motors and an Arduino microcontroller for locomotion on rough terrain.
2. The robot will be 3D modeled and simulated in MATLAB and Solidworks before hardware implementation.
3. The aims are to study robot kinematics and mechanics, implement hardware and software, and understand locomotion to move like a snake.
4. Expected outcomes include uses for the robot in industries like inspection, rescue missions where it can access hard to reach places, and for military surveillance.
An autonomous robot that will roam in malls and will scan product shelves and record its status (whether empty or not) using arduino microcontroller and labview software.
This document describes a robot project that uses a VU meter to track sound intensity levels in real-time. The robot uses a microcontroller, electret microphone, amplifier circuit, and LCD display to traverse an area on a virtual grid and find the highest sound intensity. It measures sound values at grid points and stores them in an array. The robot follows algorithms to navigate the grid, return to origin, and navigate to points of highest/lowest sound. Potential extensions using MATLAB graphical interface and other sensors are proposed.
Robotic technology has evolved from early concepts of robots in literature to modern applications. Robots are programmable machines designed to perform tasks automatically. They consist of mechanical parts, sensors to perceive the environment, processors to make decisions, and effectors to manipulate objects. Key events included the coining of the term "robot" in 1920 and "robotics" in the 1940s. Isaac Asimov proposed three laws of robotics to ensure robots do not harm humans. Modern robots are used for industrial manufacturing, medical procedures, space exploration, military applications, and more. They allow tasks to be performed quickly, consistently and in hazardous environments.
This document provides a summary of the system design for an autonomous robot. It describes the hardware components available including Lego Mindstorms kits with sensors, motors and structural parts. It also describes the available software tools and programming languages. The document outlines the system model, software and hardware capabilities and compatibility. It details the reusable components from previous projects and the planned software and mechanical structures. It explains the coordinate system, localization, navigation and other methodologies to be used.
International Journal of Computational Engineering Research (IJCER) ijceronline
?
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology
This document outlines the design of a tour guide robot for the Chambers Technology Center building. It includes sections on the system design, hardware and software research, project development, justifications for design choices, test results, conclusions, applications, lessons learned, and future improvements. The robot uses sensors and microcontrollers to navigate autonomously around obstacles while providing verbal descriptions of points of interest on its tour route. Hardware includes ultrasonic sensors for obstacle avoidance, a compass sensor for navigation, and a Raspberry Pi for voice recognition and speech. Software includes algorithms for navigation and the Voicecommand program. The team developed the system over the semester and tested its performance.
Industrial robots are general purpose machines that can perform tasks faster and continuously like humans but without needs for pay, food, or breaks. They have evolved from early prototypes in the 1940s-1960s to become multifunctional manipulators used for tasks that are dangerous, repetitive, or difficult for humans. Robots are classified and their movements controlled through various joint and drive systems along with sensors to coordinate their operations in industrial applications like materials handling, processing, and assembly.
This document describes a line following robot project created by students at the Shri Govindram Seksaria Institute of Technology and Science Indore. The robot uses 3 IR sensor pairs and 2 motors to follow a black line on a white surface. It works by using the IR sensors to detect the line and send signals to the motor control circuitry, which instructs the motors to move the robot forward or turn as needed to stay on the line. The document discusses the components, working model, block diagram, applications and conclusions of the project. It proposes areas for future work, such as using a microcontroller and color sensors to add obstacle avoidance and other capabilities to the robot.
The wireless bomb disposal robot uses a control application to remotely control the robot via wireless technology. The robot has a base with wheels, a robotic arm, and a camera for video feedback. The control application sends signals to the microcontroller on the robot which directs the base motors and arm motors. The robot provides safety for bomb disposal squads by allowing remote inspection and manipulation of suspicious objects. Potential improvements include a more compact, quickly moving design with improved reliability.
Robots are machines that can perform tasks in place of humans. They are used in dangerous environments like handling radioactive materials or in space exploration where humans cannot survive. Robots have replaced humans in performing repetitive and dangerous tasks. This is done to eliminate human operations in hazardous conditions, save labor costs, and increase production speed in industries. Servo motors are used to control the precise movement of robots. Microcontrollers help connect robots to WiFi to enable remote operation and control over networks. Industrial robots are used widely in manufacturing sectors like automotive, paper, chemical and other industries.
This document provides an overview of robotics and artificial intelligence. It defines robotics as the science and technology of robots, their design, manufacture, and application. It discusses the history and development of robots from early designs by Leonardo da Vinci to modern industrial robots. The document also describes different types of robots including pick and place robots, continuous path control robots, and sensory robots. It outlines applications of robots in areas like manufacturing, space exploration, agriculture, and more. Finally, it introduces artificial intelligence concepts like autonomous agents and behavior engineering and provides examples of AI robots like SPOT, Fresh Kitty, and the humanoid robot COG.
Backstage Software Templates for Java DevelopersMarkus Eisele
?
As a Java developer you might have a hard time accepting the limitations that you feel being introduced into your development cycles. Let's look at the positives and learn everything important to know to turn Backstag's software templates into a helpful tool you can use to elevate the platform experience for all developers.
? ????? ??????? ????? ?
???????? ??????????? is proud to be a part of the ?????? ????? ???? ???? ??????? (?????) success story! By delivering seamless, secure, and high-speed connectivity, OSWAN has revolutionized e-?????????? ?? ??????, enabling efficient communication between government departments and enhancing citizen services.
Through our innovative solutions, ???????? ?????????? has contributed to making governance smarter, faster, and more transparent. This milestone reflects our commitment to driving digital transformation and empowering communities.
? ?????????? ??????, ?????????? ??????????!
Replacing RocksDB with ScyllaDB in Kafka Streams by Almog GavraScyllaDB
?
Learn how Responsive replaced embedded RocksDB with ScyllaDB in Kafka Streams, simplifying the architecture and unlocking massive availability and scale. The talk covers unbundling stream processors, key ScyllaDB features tested, and lessons learned from the transition.
Computational Photography: How Technology is Changing Way We Capture the WorldHusseinMalikMammadli
?
? Computational Photography (Computer Vision/Image): How Technology is Changing the Way We Capture the World
He? d¨¹?¨¹nm¨¹s¨¹n¨¹zm¨¹, m¨¹asir smartfonlar v? kameralar nec? bu q?d?r g?z?l g?r¨¹nt¨¹l?r yarad?r? Bunun sirri Computational Fotoqrafiyas?nda(Computer Vision/Imaging) gizlidir¡ª??kill?ri ??km? v? emal etm? ¨¹sulumuzu t?kmill??dir?n, komp¨¹ter elmi il? fotoqrafiyan?n inqilabi birl??m?si.
TrustArc Webinar - Building your DPIA/PIA Program: Best Practices & TipsTrustArc
?
Understanding DPIA/PIAs and how to implement them can be the key to embedding privacy in the heart of your organization as well as achieving compliance with multiple data protection / privacy laws, such as GDPR and CCPA. Indeed, the GDPR mandates Privacy by Design and requires documented Data Protection Impact Assessments (DPIAs) for high risk processing and the EU AI Act requires an assessment of fundamental rights.
How can you build this into a sustainable program across your business? What are the similarities and differences between PIAs and DPIAs? What are the best practices for integrating PIAs/DPIAs into your data privacy processes?
Whether you're refining your compliance framework or looking to enhance your PIA/DPIA execution, this session will provide actionable insights and strategies to ensure your organization meets the highest standards of data protection.
Join our panel of privacy experts as we explore:
- DPIA & PIA best practices
- Key regulatory requirements for conducting PIAs and DPIAs
- How to identify and mitigate data privacy risks through comprehensive assessments
- Strategies for ensuring documentation and compliance are robust and defensible
- Real-world case studies that highlight common pitfalls and practical solutions
https://ncracked.com/7961-2/
Note: >> Please copy the link and paste it into Google New Tab now Download link
Free Download Wondershare Filmora 14.3.2.11147 Full Version - All-in-one home video editor to make a great video.Free Download Wondershare Filmora for Windows PC is an all-in-one home video editor with powerful functionality and a fully stacked feature set. Filmora has a simple drag-and-drop top interface, allowing you to be artistic with the story you want to create.Video Editing Simplified - Ignite Your Story. A powerful and intuitive video editing experience. Filmora 10 hash two new ways to edit: Action Cam Tool (Correct lens distortion, Clean up your audio, New speed controls) and Instant Cutter (Trim or merge clips quickly, Instant export).Filmora allows you to create projects in 4:3 or 16:9, so you can crop the videos or resize them to fit the size you want. This way, quickly converting a widescreen material to SD format is possible.
UiPath Automation Developer Associate Training Series 2025 - Session 2DianaGray10
?
In session 2, we will introduce you to Data manipulation in UiPath Studio.
Topics covered:
Data Manipulation
What is Data Manipulation
Strings
Lists
Dictionaries
RegEx Builder
Date and Time
Required Self-Paced Learning for this session:
Data Manipulation with Strings in UiPath Studio (v2022.10) 2 modules - 1h 30m - https://academy.uipath.com/courses/data-manipulation-with-strings-in-studio
Data Manipulation with Lists and Dictionaries in UiPath Studio (v2022.10) 2 modules - 1h - https:/academy.uipath.com/courses/data-manipulation-with-lists-and-dictionaries-in-studio
Data Manipulation with Data Tables in UiPath Studio (v2022.10) 2 modules - 1h 30m - https:/academy.uipath.com/courses/data-manipulation-with-data-tables-in-studio
?? For any questions you may have, please use the dedicated Forum thread. You can tag the hosts and mentors directly and they will reply as soon as possible.
Formal Methods: Whence and Whither? [Martin Fr?nzle Festkolloquium, 2025]Jonathan Bowen
?
Alan Turing arguably wrote the first paper on formal methods 75 years ago. Since then, there have been claims and counterclaims about formal methods. Tool development has been slow but aided by Moore¡¯s Law with the increasing power of computers. Although formal methods are not widespread in practical usage at a heavyweight level, their influence as crept into software engineering practice to the extent that they are no longer necessarily called formal methods in their use. In addition, in areas where safety and security are important, with the increasing use of computers in such applications, formal methods are a viable way to improve the reliability of such software-based systems. Their use in hardware where a mistake can be very costly is also important. This talk explores the journey of formal methods to the present day and speculates on future directions.
DevNexus - Building 10x Development Organizations.pdfJustin Reock
?
Developer Experience is Dead! Long Live Developer Experience!
In this keynote-style session, we¡¯ll take a detailed, granular look at the barriers to productivity developers face today and modern approaches for removing them. 10x developers may be a myth, but 10x organizations are very real, as proven by the influential study performed in the 1980s, ¡®The Coding War Games.¡¯
Right now, here in early 2025, we seem to be experiencing YAPP (Yet Another Productivity Philosophy), and that philosophy is converging on developer experience. It seems that with every new method, we invent to deliver products, whether physical or virtual, we reinvent productivity philosophies to go alongside them.
But which of these approaches works? DORA? SPACE? DevEx? What should we invest in and create urgency behind today so we don¡¯t have the same discussion again in a decade?
Transform Your Future with Front-End Development TrainingVtechlabs
?
Kickstart your career in web development with our front-end web development course in Vadodara. Learn HTML, CSS, JavaScript, React, and more through hands-on projects and expert mentorship. Our front-end development course with placement includes real-world training, mock interviews, and job assistance to help you secure top roles like Front-End Developer, UI/UX Developer, and Web Designer.
Join VtechLabs today and build a successful career in the booming IT industry!
UiPath Automation Developer Associate Training Series 2025 - Session 1DianaGray10
?
Welcome to UiPath Automation Developer Associate Training Series 2025 - Session 1.
In this session, we will cover the following topics:
Introduction to RPA & UiPath Studio
Overview of RPA and its applications
Introduction to UiPath Studio
Variables & Data Types
Control Flows
You are requested to finish the following self-paced training for this session:
Variables, Constants and Arguments in Studio 2 modules - 1h 30m - https://academy.uipath.com/courses/variables-constants-and-arguments-in-studio
Control Flow in Studio 2 modules - 2h 15m - https:/academy.uipath.com/courses/control-flow-in-studio
?? For any questions you may have, please use the dedicated Forum thread. You can tag the hosts and mentors directly and they will reply as soon as possible.
https://ncracked.com/7961-2/
Note: >> Please copy the link and paste it into Google New Tab now Download link
Brave is a free Chromium browser developed for Win Downloads, macOS and Linux systems that allows users to browse the internet in a safer, faster and more secure way than its competition. Designed with security in mind, Brave automatically blocks ads and trackers which also makes it faster,
As Brave naturally blocks unwanted content from appearing in your browser, it prevents these trackers and pop-ups from slowing Download your user experience. It's also designed in a way that strips Downloaden which data is being loaded each time you use it. Without these components
Technology use over time and its impact on consumers and businesses.pptxkaylagaze
?
In this presentation, I will discuss how technology has changed consumer behaviour and its impact on consumers and businesses. I will focus on internet access, digital devices, how customers search for information and what they buy online, video consumption, and lastly consumer trends.
3. Projects with robots for teens.
What we already discussed.
1. Line following robots
2. Y shaped lines for robots that drive to selected locations.
3. Robots following walls on corridors.
4. Algorithms for mazes:
1. Right Wall Following Algorithm (RWFA)
2. Left Wall Following Algorithm (LWFA)
3. Deterministic Switch from from RWFA and LWFA based on mapping the known part of maze
to memory.
4. Variants of searching mazes to find an exit.
5. Deterministic and probabilistic combinational behavior based on input ¨C
output matrix and multiplication of matrix by vector.
6. Combinational and State Machine based Braitenberg Vehicles
5. Analysis
1. Analyze how this behaves
in room with no light.
2. Analyze how this behaves
in room with light on floor,
oriented towards robot.
3. Analyze how this behaves
in a maze.
4. Draw snaphsots of movie
of robot position ,
orientation and internal
state in time
S1 S2
M2
M1
LOGIC
0= happy
1 =angry
7. Wall is on the
left
exit
Robots marks his
motion for Left
Wall algorithm in
blue
8. Robots maps its position
in memory and now is
back in the same point
exit
Robots marks his
motion for Left
Wall algorithm in
blue
9. Robot moves to other
wall
exit
Robots marks his
motion for Left
Wall algorithm in
crosses
Robot starts left wall
following algorithm (wall
at left)
X X
13. exit
Robot found the solution to exit by changing
the wall in the corridor but still using the left
wall following algorithm (wall at left)
X
X
X
X
X
X
X
X X X
X
X
X
X
X
X
X
X X X X X X
X
X
14. Projects with robots for teens
1. Robot finding cans and bringing them to safe place.
2. Robot attacking or escaping other robots.
3. Robots boxing.
4. Robots shooting one another.
5. Robots fencing.
6. Repeated Prisoner Dilemma for robots.
7. Repeated Chicken for robots.
8. Subsumption Architecture
9. Maze Searching
10. Genetic Algorithm
11. Tree search
16. SENSOR ARRAY
MINIMUM DISTANCE BETWEEN SENSORS IS 1cm
7 sensors
Observe the
order of
variables from
outside to the
center
17. THE PRIORITY ENCODER
7 sensors
as inputs
Number
of
sensor as
output
Problem:
Design such priority
encoder as a circuit
using Kmaps
18. THE NO SURFACE LOGIC
A
B
C
A
B
C
0
0
0
1
A
B
C
0
1
0
0
NS signal = no
line detected
NS signal = no
line detected
19. INPUTS TO THE MICROCONTROLLER
NS GS A2 A1 A0 STATE IN ACTION
1 X X X X No surface is detected Stop the motors
0 1 X X X No line is detected Execute the no line code
(specially designed
algorithm)
0 0 0 0 0 A detects the line Sharp turn left
0 0 0 0 1 B detects the line Sharp turn right
0 0 0 1 0 C detects the line Turn left
0 0 0 1 1 D detects the line Turn right
0 0 1 0 0 E detects the line Move left
0 0 1 0 1 F detects the line Move right
0 0 1 1 0 G detects the line Go straight
0 0 1 1 1 Forbidden state Software reset the
processor
NS
signal =
no line
detected
28. RESULT AND CONCLUSION
1. The robot follows a line as demonstrated.
2. It effectively overcomes problems such as
¡°barren land syndrome¡± and line breaks.
3. The hardware and software works as
designed.
29. APPLICATIONS OF LINE
FOLLOWING IDEAS
1. Industrial automated equipment carriers
2. Automated cars.
3. Tour guides in museums and other similar
applications.
4. Second wave robotic reconnaissance
operations.
30. LIMITATIONS
1. Choice of line is made in the hardware abstraction and
cannot be changed by software.
2. Calibration is difficult, and it is not easy to set a perfect
value.
3. The steering mechanism is not easily implemented in
huge vehicles and impossible for non-electric vehicles
(petrol powered).
4. Few curves are not made efficiently, and must be
avoided.
31. ¡LIMITATIONS
1. Lack of a four wheel drive, makes it not
suitable for a rough terrain.
2. Use of IR even though solves a lot of
problems pertaining to interference, makes it
hard to debug a faulty sensor.
3. Lack of speed control makes the robot
unstable at times.
32. FUTURE SCOPE
1. Software control of the line type (dark or
light) to make automatic detection possible.
2. ¡°Obstacle detecting sensors¡± to avoid
physical obstacles and continue on the line.
3. Distance sensing and position logging &
transmission.
34. Robot that delivers stuff to
locations
1. We will compare robots A, B, C, D, E, F
2. Robot can be prototyped with Lego NXT
3. Then we can add components from Tetrix
4. It is often faster, cheaper and better to design the robot from
wood, plastic and metal by yourself and only use gears and
motors with encoders from Tetrix.
5. We use this approach in our theatre.
6. Needs:
1. Doll grabbing (lifting)
2. Linear motion
3. Base control
How to design
mechanically robots
that can grab some
items and deliver to
certain locations?
35. Robot A
1. Deliver dolls to locations
1. Grabs an item
2. Releases the item
2. Can be used to deliver little robot actors to
locations in robot theatre
3. Uses line following
36. Robot takes some object (a doll)
in place X and delivers it to the
location in place Y
40. Robot D
? The same as before, robot delivers dolls to
locations
61. General Design Considerations
? Effectiveness
¨C Does the robot do what you want it to?
¨C Speed & accuracy
? Reliability
¨C How often will it work?
? Ease of Implementation
¨C Balance complex, effective solutions with simple to build
solutions
¨C Faster implementation means that you have more time
allowed for debugging,
? and probably, it means less debugging
62. Effectiveness
? Electrical
1. Multiple stages
2. Efficient use of
inputs/outputs
3. Low power usage
4. Effective Motor
use
5. Sensor placement
/use
Mechanical
1. ¨C Bearing surfaces
2. ¨C Stiffness
3. ¨C Appropriate constraints on
degrees of Freedom
4. ¨C Gearing
5. ¨C Speed
6. ¨C Low mass / moment of inertia
68. Projects from Lego Robots
A piano-playing robot
The piano-playing robot positions itself correctly in front of the piano (using a camera
following a color target) and then plays with its two-fingered hand.
69. Projects from Lego Robots
1. Smiley face robot
chases the moving
orange target.
2. The eyebrows and
mouth move to
show happy and
sad.
1. Smiley face also has a small camera that tracks colors so it can follow the orange
target.
2. The mouth and eyebrows move using servo motors.
74. PC
The robot theatre concept
Bluetooth
connection
Personal
computer
GPU supercomputer
head
hands
75. ? This generic situation, where the
robot¡¯s behavior is conditioned
upon the input from the feature
detectors connected to the
camera, maps to a constraint
satisfaction problem as described
here.
? The way this would work is that
the human / camera / robot
system would generate
optimization and satisfiability
problems, to determine how the
robot¡¯s effectors should fire, and
these problems can be remotely
solved using Orion.
? For example, you could acquire a
Hansen Robotics Einstein, sit it
him on your desk, train a camera
on your face, use an anger feature
detector that causes the Einstein
robot to laugh harder the angrier
you get.
77. BIBLIOGRAPHY
? Programming and Customizing the PIC
microcontroller by Myke Predko
? PICmicro Mid-Range MCU Family Reference
Manual by MICROCHIP
? PIC Robotics, A beginner¡¯s guide to robotics
projects using the PICmicro by John Iovine
78. ¡BIBLIOGRAPHY
Websites referred¡
? The Seattle Robotics Society Encoder library of
robotics articles
? Dallas Personal Robotics Group. Most of these
tutorials and articles were referred.
? Go Robotics.NET, this page has many useful links to
robotics articles.
79. ¡BIBLIOGRAPHY
? Carnegie Mellon Robotics Club. This is the links page
with lots of useful resources
? This page is called the ¡°Micro-mouse Handbook¡± and
an excellent tutorial for small scale robotics.
? This is the main website of microchip. Thousands of
application notes, tutorials & manuals can be found
here.