![Electrician II (Industrial Plant Maintenance) - (July 17, 2007 – June 15, 2008)
Philippine Foremost Milling Corporation
Lot 2 & 3 Block 1, B.V. Romero Blvd., Manila Harbor Centre, Radial Road-10, Vitas, Tondo, Manila, Philippines
Duties and Responsibilities:
 Troubleshoot Motor Control and Programmable Logic Controller (PLC) as well as Large Conveyor Motors.
 Daily monitoring and maintenance of Atlas Copco Air Compressors and Air Dryers for both Flour Mill & Feed Mill Plant;
 Daily Monitoring for Electrical parameters of Substation, Control rooms & conduct regular preventive maintenance on
it;
 Neuero and Condor Ship Flour unloader operator / technician;
 Preventive Maintenance of various Conveyor motors at Ship unloader, Silo conveying system & Flour Mill Plant before
and after unloading;
 Monitoring and Testing of 75 KVA and 1.8 MW Generator set of the plant, twice a week, etc.
FREELANCH ELECTRICAL ENGINEER - (October 2006 - July 2007)
 Design, Estimates, Electrical installations & Material take-off In residential & commercial buildings;
 Taken review & coaching course for the Licensure Examination of Electrical Engineer & Master Electrician.
BUILDING ELECTRICIAN - (April 8, 2006 – October 17, 2006)
Voltage Electrical Contractor Corporation (Catherine St., Perpetual Village, Taguig City, Philippines)
Job Site: TRAG 1 Project - The Residence at Greenbelt (48 - Storey High Rise Condominium)
Duties and Responsibilities:
 Reviewed, interpreted Electrical plans & details with the architectural and structural plans prior to site
implementation
 Conduit layout, Box setting, Chipping works
 Layout and wiring of condominium units
 Conducted Insulation Resistance Test of electrical cables & wires
 Installation of electrical panel boards, lightings, switches, convenience outlet, etc.
On-the-Job Training
Bulusan Electrical Corporation PM Automation Inc.
May 25, 2004 - July 31, 2004 (500 hrs.) Siemens Automation & Drive Systems Integration Distribution Boards & Switchboards
Sept. 2004 – December 2004 (500 hrs.)
SEMINARS AND TRAINING ATTENDED:
 LEADERSHIP TRAINING - (LEARDERSHIP & COMMUNICATION)
 LIFE CRITICAL TRAINING - (EQUIPMENT OPENING & LINE BREAKING)
 LIFE CRITICAL TRAINING - (HIGH PRESSURE CLEANING)
 LIFE CRITICAL TRAINING - (SAFE WORK PERMIT & LCST)
 LIFE CRITICAL TRAINING - (HOT WORKS)
 LIFE CRITICAL TRAINING - (ELECTRICAL SAFETY)
 LIFE CRITICAL TRAINING - (LOCK-OUT / TAG-OUT [LOTO])
 LIFE CRITICAL TRAINING - (CONFINED SPACE)
 LIFE CRITICAL TRAINING - (WORKING AT HEIGHTS & FBH DONING)
 LIFE CRITICAL ACTIVITY TRAINING - (DEFENSIVE DRIVING & SAFE PRACTICES)
 SSC EHS TRAINING - (HAZARD COMMUNICATION)
 SSC EHS TRAINING - (COMPETENT PERSON)
 SSC EHS TRAINING - (BLOOD BORNE PATHOGENS)
 SSC EHS TRAINING - (HAND SAFETY)
 SSC EHS TRAINING - (HAZARD RECOGNITION)
 SSC EHS TRAINING - (HAND & POWER TOOLS)
 SSC EHS TRAINING - (BOLT-UP, RIGGING & DICKING)
 SSC EHS TRAINING - (EXTRA ORDINARY PPE)
 SSC EHS TRAINING - (AERIAL WORKS)
 First Aid Training for Industrial Employees The Principles and Practices of HACCP
 Power Factor Correction Training Program Substation Engineering
 9th Annual National Mega Seminar & 7th Annual National Convention - Institute of Integrated Electrical Engineer (IIEE)
PERSONAL DATA:
Birth date : January 29, 1984 Civil Status : Married
Citizenship : Filipino Passport No.: EC5073749 (Date of expiry: August 25, 2020)](https://image.slidesharecdn.com/13447de9-a0dd-44b6-8ffa-95363656e9d6-160410044208/85/ARNOLD-BUSTAMANTE-RESUME-5-320.jpg)
More Related Content
What's hot (20)
Similar to ARNOLD BUSTAMANTE - RESUME (20)
ARNOLD BUSTAMANTE - RESUME
- 1. ARNOLD B. BUSTAMANTE Phase 1, Blk. 1, Lot 64, Hanniyah Homes, Babag 1, Lapu-Lapu City,Cebu, Philippines Mobile No. +966 548062845 / +63 9324932134 Email Address:arnold_bustamante84@yahoo.com KSA Driving License: (Expiration – February 2019) OBJECTIVE:  To join in a dynamic company wherein I can use my knowledge, experience and skills in the field of engineering in which my potentials and skills will further be developed and will be used to the full extent.  To work and be a part of the company that provides quality products and services and to contribute my knowledge, experience and skills in attaining company’s goal and objectives. EDUCATIONAL BACKGROUND: Bachelor of Science major in Electrical Engineering - SY: 2001 - 2006 (5 years course) Rizal Technological University - Mandaluyong City, Philippines PROFESSIONAL AFFILIATION & RECOGNITION:  ADVANCED PROJECT MANAGEMENT for PMP CREDENTIAL EXAM - Certificate of Completion  SADARA QUALITY PROGRAM - SDL Buildings - Certificate of Appreciation for Outstanding Quality Performance  SADARA SAFETY PROGRAM - SDL Buildings - Certificate of Appreciation for Outstanding HSE Performance & Dedication  Saudi Council of Engineers - Registered Electrical Engineer Degree  Professional Regulation Commission - Registered Electrical Engineer – Licensure Examination (April 2007)  Professional Regulation Commission - Registered Master Electrician – Licensure Examination (April 2007)  Institute of Integrated Electrical Engineers of the Philippines (IIEE) SUMMARY: Almost (10) years of extensive employment experienced in construction industry for Design, Estimates, Installation, Implementation, Quality Assurance, Quality Control, Testing & Commissioning and Supervisory position both horizontal & vertical structures for residential /commercial buildings, Petrochemical Plant as well as in Operations & Maintenance of Commercial Buildings and Industrial plant with almost five (5) years experienced in Kingdom of Saudi Arabia as Construction Electrical Site Engineer, Electrical & Instrumentation QA/QC Engineer, Field Engineering for Electrical & Instrumentation Systems of Petrochemical Buildings/Facilities, University Buildings, United States of America Embassy Project, Commercial & Residential Buildings pertaining to landscape lightings, irrigation system, underground distribution and duct banks for Power & Telecommunications, LV & MV Cable pulling, (MV) Power substations, Lighting system, Small power system, Power distribution system, Power for HVAC system, Earthing & Lightning Protection system, Cable tray & conduit system, Sump Pump Control System, Cathodic Protection, and Low Currents systems such as Structured Cabling system, Public Address/General Alarm system, CCTV, Security Access Control system, Fire Alarm & Gas Detection system, Audio Visual, Clock system, Smart Class system, BACnet / BMS, Panic alarm & Alarm Monitoring system, Centralized Emergency Monitoring System, Lighting Control system, SCADA, DC System, FM 200 Fire Suppression Control system, etc. SKILLS AND STRENGTHS:  Demonstrate a thorough working knowledge of the National Electric Code/NFPA 70, NFPA 72, NFPA 780, IEC, IEEE, NEMA VE 1, NEMA VE 2, SAES, SAEP, SAMSS, SAPS, PIP, SATIP, SAIC, SATR, SAIP, SAITR, and also have working knowledge of electrical & instrumentation system installations including materials, methods, specifications, and hazardous location identification for oil and gas and/or petrochemical industries.  Ability to build & retain relationship with diverse groups and cultures, such as contractors, suppliers, clients & other professionals.  Excellent in Computer Application (MS Word, MS Excel, MS PowerPoint & Internet).  Perform Basic AutoCAD Command.  Possessed leadership skills, open-minded, hardworking, versatile, quick learner, team player & result oriented, ambitious, Pro-active, loyal, punctual, responsible, dedicated and honest  Able to run engineering projects from inception to success.  Accuracy - excellent attention to details & well-organized.  Mathematical/Analytical/Statistical skills.
- 2.  Excellent in (English) verbal & written communication skills.  Self-motivated and able to work independently, safely and achieved quality results.  Possessed investigative skills, mindset and inquisitive in nature. Demonstrate trouble-shooting and problem solving abilities. WORK EXPERIENCED: QUALITY UNIT LEAD RELIEVER - (August 2015 - Present) LEAD ELECTRICAL & INSTRUMENTATION QA/QC INSPECTOR - (Feb 22, 2014 - Present) Sponsor: AL-HUGAYET CONTRACTING EST. - (Al-khobar, Kingdom of Saudi Arabia) Project Title: SADARA PETROCHEMICAL COMPLEX PLANT - (Jubail 2, Kingdom of Saudi Arabia) Sadara Chemical Company is a joint venture developed by the Saudi Arabian Oil Company (Saudi Aramco) and The Dow Chemical Company (Dow). It is an unprecedented undertaking – the largest chemical complex ever built in the world in a single phase, with 26 integrated world-scale manufacturing plants, over 3 million metric tons of capacity per year, and a total investment of about US$20 billion. Project Value: $20 Billion (US Dollar) Building Handled:  PACKAGE A – Construction of ten (10) Buildings/Facilities for Site Warehouse, Chiller Enclosure & Maintenance Complex, Power Hub/MV Substation, Emergency Generator, Raw Material Warehouse & Sunshade, Fuel Station & Storage Tanks, Offsite Maintenance - (October 2014 - Present)  PACKAGE B – Construction of nine (9) Buildings/Facilities for Security Administration, Emergency Generator, Reliability & Laboratory, Cafeteria, Musallah, Central Maintenance, Contractor Hanger, Tool Room & Chiller Enclosure – (Feb 23, 2014 - Present)  PACKAGE C - Construction of EMERGENCY RESPONSE BUILDING - (Feb 23, 2014 - Present)  PACKAGE D2 - Construction of fifth ten (15) Buildings/Facilities for Gate Houses, Security X-ray & Support, Sun shelter, Sunshade, Sunshade Security Entrance, Security Support - (September 2014 - Present)  PACKAGE D - Construction of twenty eight (28) Buildings/Facilities for Gate Houses, Security X-ray & Support, Sun shelter, Sunshade, Sunshade Security Entrance, Security Support - (Feb 23, 2014 - October, 2014) Duties and Responsibilities:  Quality Unit Lead Reliever.  Performed Quality Assurance & Quality Control Inspection and Monitoring of Electrical &Instrumentation system such as MV Power Substation, Lighting system, Small power system, Power distribution system, Power for HVAC system, Earthing & Lightning Protection system, Cable tray & conduit system, Sump Pump Control System and Low Currents systems such as Fire Alarm & Gas Detection system, BACnet / BMS, Lighting Control system, Electrical Power Management System, FM 200 Fire Suppression Control system, etc.  Oversaw Electrical Power Supply & Instrumentation for HVAC Equipment’s such as compressors, chillers, chilled water pump motors, air handling units, package & split DX units and fans & blowers, etc.  Oversaw Electrical Equipment’s Erection, Testing & Commissioning – Diesel Generator set, MV Oil-filled Power Transformer, Dry-type distribution transformer, MV & LV Switchgears, Motor Control Center, Power distribution boards, pump motors, Variable Frequency Drives, Annunciator, HRGR, DC Battery system, HVAC system control panels,  Involved in pre-commissioning process for all Instrumentation and Electrical Equipment and evaluated all the Testing results as per SADARA Standards & Specifications and International Standards  Engaged in Electrical & Instrumentation System Testing and Commissioning.  Reviewed/approved quality procedures, method statements, technical submittals/queries, shop drawings and inspection & test plans.  Ensured that works are executed in accordance to Company Standards – SADARA standards & specifications, Schedule Q and International Codes such as NEC, IEC, IEEE and NFPA.  Resolve technical problems encounter during construction.  Conducted day to day surveillance to the on-going Electrical and Instrumentation works of the contractors to ensure that quality is being properly implemented and in accordance to IFC Drawing, SADARA Standards & Specifications and International Standards requirements.  Attended daily Electrical and Instrumentation Inspection Notification requested by the Contractors for Package A, B, D2 & ERB.  Conducted Material Receiving Inspection as per approved Vendor, Material & Data Submittal and as per Project Specification requirements.  Attended weekly safety meeting.
- 3.  Attended weekly Electrical/Instrumentation coordination meeting.  Issued Surveillance log and NCR to the works which are not in accordance to the IFC Drawing, SADARA Standards & Specifications and International Standards requirements.  Submitted weekly report & highlights to SADARA Quality Unit Lead.  Coordinated to the Contractor QC Inspectors of the issues which were violated to the IFC Drawing, SADARA Standards & Specifications and International Standards requirements.  Helped the Contractor to close all the Surveillance log and NCR that are issued to them by imparting them the necessary procedures and compliance to the IFC Drawing, SADARA Standards & Specifications and International Standards requirements.  Coordinated to the Designers, PMT Electrical Superintendent & Contractors for any discrepancy, lack of installation details that are found in the IFC drawing and discrepancy between IFC drawing and Project Specification requirements.  Directly reported to the SADARA Quality Unit Lead of all Quality issues on site.  Followed up & close missing/lacking quality documents and QVD.  Conducted punch list walk-through with the contractors for Package A, B, D2 & ERB.  Closed of punch list items upon contractor’s rectification is done. ELECTRICAL ENGINEER / E & I QC ENGINEER - (May 17, 2011 - December 22, 2013) Saudi Binladin Group (An ISO 9001 Certified Company) - (Riyadh, Kingdom of Saudi Arabia) Project Title: King Saud University - Girls Campus Project Project Value: $2.21 Billion (US Dollar) Building Handled: College of Applied Medical Science - (May 18, 2011 - November 8, 2013) - Project handover College of Dentistry - (March 14, 2013 - August 9, 2013) - Project handover College of Science - (August 10, 2013 - November 8, 2013) Project Title: King Faisal Specialist Hospital and Research Center - (North Jeddah, Kingdom of Saudi Arabia) Project Value: $471 Million (US Dollar) - (November 9, 2013 - December 22, 2013) Duties and Responsibilities:  Prepared & coordinated all the Electrical shop drawings such as Lighting, Power system, Power distribution boards, Power for HVAC, Earthing & Lightning protection system, Cable tray & conduit system, Fire Detection & Alarm system, BMS, Structured Cabling, Access Control, Panic alarm & Alarm Monitoring system, Public Address & Clock system, Smart Class system, Centralized Emergency Monitoring System, Lighting Control system, SCADA, DC System, FM 200 Fire Suppression Control system, etc.  Led Engineer for the installation of Electrical equipment such as Distribution Transformer, RMU, Switchgear, Distribution Boards, MDB, MCC, EMCC as well as the Low Current system;  Led Engineer for the cable pulling, termination & installation of various disconnect switches of Electromechanical equipment such as (AHU, SPU, FCU, VAV/VAVR, Humidifier, elevator, air compressor, vacuum pump, sump pump, various exhaust fans & medical fans) as well as medical equipments such as (MRI, X-ray, Digital mammography, Audio booth, etc.).  Oversaw all Electrical Installation works to ensure that works are being implemented in compliance with the International codes (IEC) & (NEC), Projects Specifications, and approved plans, ITP & Cost.  Administered the Project Quality plan, Inspection test plans; Prepared inspection request & got approval from Consultant.  Arranged & organized all project documents such as contracts, specifications, plans, etc.  Generated Electrical Installation Schedules based on the time frame of the over-all Project schedules;  Coordinated & follow-up of Balance of Materials & Shop Drawings with the Electrical contractors, Suppliers & Designers.  Daily coordination with various Engineers & Contractors such as Mechanical, Structural, Architectural on various site issues.  Scheduled & planned all actual construction works to recommend and improve proper sequencing of works for timely project completion.  Coordinated with the project's design engineers and/or consultants on the technical aspects of the construction activities to ensure correctness of all issued plans and specifications.  Prepared periodic sheets such as daily work program, work permits, safety evaluation (HSSE Standard) and daily work returns. Likewise, responsible in promoting safety consciousness among workers and participated in evaluating work hazard and overall safety program of the project.  Prepared work program/technical reports & other pertinent details of the project.  Evaluated project status to recommend corrective actions and control measures for proper project accomplishment.  Prepared estimates and labor costs for any project-deviation and additional works.  Coordinated and supervised the termination, testing and commissioning of the project as required, etc.  Prepared test data and procedures for final acceptance of the projects; Prepared & evaluated as-built drawings.
- 4. FIELD ENGINEER / E & I QC ENGINEER - (March 15, 2010 - May 14, 2011) Makati Development Corporation (An Ayala Land Inc. Company) Integrated Management System Standards Certified (ISO 9001:2000, ISO 14001:2004, OHSAS 18001:2007) 10/F, Ayala Life-FGU Center Madrigal Business Park Alabang-Zapote Road Muntinlupa City 1780, Philippines Project Title: Building and Industry Construction Projects and Land Development Project Value: $125 Million (US Dollar): United States of America Embassy Project - Manila (United States Department of State, Overseas Building Operations OBO) Building Handled: Veterans Affair Clinic, VA CAC, Chancery Consular Office, Main CAC, US Marine Security Guard Quarter (MSGQ), Utility Building - (March 15, 2010 - May 14, 2011) Makati Development Corporation Headquarters - (February 8, 2011 - May 14, 2011) as (MEP Project-In-Charge) Duties and Responsibilities:  Oversaw the E & I Installation works to ensure that works are being implemented in compliance with the International codes, Overseas Building Operations (OBO) Specifications, and approved plans, quality & cost.  Oversaw for the installation of Electrical equipments such as Vacuum Fault Interrupter (VFI), Distribution Transformer, Switchgear, Distribution Boards, MDB, MCC & Electromechanical equipments such as (AHU, FCU, SPU, VAV/VAVR, Elevator, sump pump, various exhaust fans & medical fans, etc.), as well as the Low Current system & FM 200 Fire Suppression Control system, etc.;  Oversaw for the cable pulling, termination & installation of various disconnect switches of Electromechanical equipment such as (AHU, SPU, FCU, VAV/VAVR, elevator, sump pump, various exhaust fans & medical fans) as well as medical equipments such as (X-ray, Digital mammography, Audio booth, etc.).  Evaluated and Analyzed Contractor’s Accomplishment Report.  Led and supervised both temporary and permanent electrical works;  Administered the Project Quality plan, Inspection & test plans; Prepared inspection request & got approval from Consultant.  Arranged & organized all project documents such as contracts, specifications, plans, etc.  Coordinated & follow-up of Balance of Materials & Shop Drawings with the MEP contractors, Suppliers & Designers.  Coordinated with Overseas Building Operations (OBO) Engineers & Inspectors/Engineers.  Supervised E & I Punch lists Closures (Wall/Ceiling); Prepared and monitored drawings and RFI registers.  Resolved conflicts between MEP as well as between Architectural & Structural.  Taken charged in the interpretation of the contract documents, specifications and plans;  Reviewed, interpreted and coordinated MEP plans & details with architectural and structural plans;  Ensured the implementation of the quality plans and objectives of the department and project assignment  Evaluated project status to recommend corrective actions and control measures for proper project accomplishment.  Scheduled and planned all actual construction works to recommend and improve proper sequencing of works for timely project completion.  Coordinated with the project's design engineers and/or consultants on the technical aspects of the construction activities to ensure correctness of all issued plans and specifications.  Prepared periodic sheets such as daily work program, work permits, safety evaluation (HSSE Standard) and daily work returns. Likewise, responsible in promoting safety consciousness among workers and participates in evaluating work hazard and overall safety program of the project.  Prepared work program/technical reports and other pertinent details of the project.  Coordinated with various engineers & contractors on how the installation is to be carried out in Site.  Coordinated and supervised the termination, testing and commissioning of the project as required, etc.  Evaluated and checked Contractor’s as-built drawings. MEP ENGINEER / SHIFT ENGINEER - (July 1, 2008 – February 16, 2010) Jardine Energy Control Company, Inc. (Job Site: Ayala Malls - TRINOMA) G/F Jardine Building, JM Compound, Faraday St. corner Sergio Osmeña, Makati City, Philippines Duties and Responsibilities:  Prepared and submitted Monthly Technical Maintenance Accomplishment Report to the Building/Facility Engineer.  Attended the Daily Coordination Meeting with the Building Administrator and/or Building Engineer.  Supervised all building related activities such as equipment operation and monitoring, preventive maintenance and other technical activities of the building.  Trained of personnel assigned in the area of responsibility.  Supervised and implemented quality control in works or activities of all technical maintenance personnel.  Monitored/Maintained properly and consistently all building utilities such as Substation, HVSG, MVSG, LVSG, Generators, Motors, Escalators, Elevators, Chiller/Ice Thermal Plant, HVAC System, AHU, Pump room, Fan Coil Unit(FCU), Telecoms, and Water Sewage Treatment Plant (STP), etc.  Recommended necessary correction, adjustment, and/or replacement of all electro-mechanical parts and components to ensure reliability of equipments.  Responded on-call activities for Merchants concern and impart necessary recommendation and preventive measures, etc.
- 5. Electrician II (Industrial Plant Maintenance) - (July 17, 2007 – June 15, 2008) Philippine Foremost Milling Corporation Lot 2 & 3 Block 1, B.V. Romero Blvd., Manila Harbor Centre, Radial Road-10, Vitas, Tondo, Manila, Philippines Duties and Responsibilities:  Troubleshoot Motor Control and Programmable Logic Controller (PLC) as well as Large Conveyor Motors.  Daily monitoring and maintenance of Atlas Copco Air Compressors and Air Dryers for both Flour Mill & Feed Mill Plant;  Daily Monitoring for Electrical parameters of Substation, Control rooms & conduct regular preventive maintenance on it;  Neuero and Condor Ship Flour unloader operator / technician;  Preventive Maintenance of various Conveyor motors at Ship unloader, Silo conveying system & Flour Mill Plant before and after unloading;  Monitoring and Testing of 75 KVA and 1.8 MW Generator set of the plant, twice a week, etc. FREELANCH ELECTRICAL ENGINEER - (October 2006 - July 2007)  Design, Estimates, Electrical installations & Material take-off In residential & commercial buildings;  Taken review & coaching course for the Licensure Examination of Electrical Engineer & Master Electrician. BUILDING ELECTRICIAN - (April 8, 2006 – October 17, 2006) Voltage Electrical Contractor Corporation (Catherine St., Perpetual Village, Taguig City, Philippines) Job Site: TRAG 1 Project - The Residence at Greenbelt (48 - Storey High Rise Condominium) Duties and Responsibilities:  Reviewed, interpreted Electrical plans & details with the architectural and structural plans prior to site implementation  Conduit layout, Box setting, Chipping works  Layout and wiring of condominium units  Conducted Insulation Resistance Test of electrical cables & wires  Installation of electrical panel boards, lightings, switches, convenience outlet, etc. On-the-Job Training Bulusan Electrical Corporation PM Automation Inc. May 25, 2004 - July 31, 2004 (500 hrs.) Siemens Automation & Drive Systems Integration Distribution Boards & Switchboards Sept. 2004 – December 2004 (500 hrs.) SEMINARS AND TRAINING ATTENDED:  LEADERSHIP TRAINING - (LEARDERSHIP & COMMUNICATION)  LIFE CRITICAL TRAINING - (EQUIPMENT OPENING & LINE BREAKING)  LIFE CRITICAL TRAINING - (HIGH PRESSURE CLEANING)  LIFE CRITICAL TRAINING - (SAFE WORK PERMIT & LCST)  LIFE CRITICAL TRAINING - (HOT WORKS)  LIFE CRITICAL TRAINING - (ELECTRICAL SAFETY)  LIFE CRITICAL TRAINING - (LOCK-OUT / TAG-OUT [LOTO])  LIFE CRITICAL TRAINING - (CONFINED SPACE)  LIFE CRITICAL TRAINING - (WORKING AT HEIGHTS & FBH DONING)  LIFE CRITICAL ACTIVITY TRAINING - (DEFENSIVE DRIVING & SAFE PRACTICES)  SSC EHS TRAINING - (HAZARD COMMUNICATION)  SSC EHS TRAINING - (COMPETENT PERSON)  SSC EHS TRAINING - (BLOOD BORNE PATHOGENS)  SSC EHS TRAINING - (HAND SAFETY)  SSC EHS TRAINING - (HAZARD RECOGNITION)  SSC EHS TRAINING - (HAND & POWER TOOLS)  SSC EHS TRAINING - (BOLT-UP, RIGGING & DICKING)  SSC EHS TRAINING - (EXTRA ORDINARY PPE)  SSC EHS TRAINING - (AERIAL WORKS)  First Aid Training for Industrial Employees The Principles and Practices of HACCP  Power Factor Correction Training Program Substation Engineering  9th Annual National Mega Seminar & 7th Annual National Convention - Institute of Integrated Electrical Engineer (IIEE) PERSONAL DATA: Birth date : January 29, 1984 Civil Status : Married Citizenship : Filipino Passport No.: EC5073749 (Date of expiry: August 25, 2020)