Site Report
0 likes82 views
This document provides instructions for a student assignment to visit a construction site and write a report. It includes the learning outcomes of understanding construction processes, building materials, safety, and the work environment. Students are asked to describe the concrete framing items on site, including structural elements, and identify the materials used. The report should include an introduction, technical observations and descriptions, photos, and conclusion that addresses the learning outcomes. Marks will be given for each of these sections, with a total of 10 marks for each of the 3 modules associated with the assignment.
1 of 2
Download to read offline
Recommended
Assignment 2
Assignment 2Momo Poyi
油
This document provides an assignment brief for a group project to take off quantities from drawings for the construction of 5 blocks of 5-story student dormitories. Students are required to prepare a complete bill of quantities for specific structural elements, including pilecaps and excavation, work below ground level, slabs and beams from the first to fourth floors, and roof slabs and beams. The goals are to develop understanding of measurement principles and techniques for preparing bills of quantities, tender documentation, and the standard method of measurement for taking off quantities from drawings. Upon successful completion, students will be able to interpret measurement clauses, distinguish design changes in descriptions, and competently prepare bills of quantities for substructure and reinforced concrete frameworks.Individual site report brief
Individual site report briefMomo Poyi
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total ofMeasurement 1-site-visit
Measurement 1-site-visitPui San
油
1) The document summarizes a site visit by students to an active construction project located in Puchong, Malaysia.
2) Upon arrival, students received a briefing about the project which included details about its large size and budget. Safety precautions for the site were also explained.
3) Students then toured the site in small groups, observing construction equipment, materials, and techniques used by workers. This helped students understand practical applications compared to theoretical knowledge.
4) Key aspects of the site included its use of pile foundations due to soil conditions, as well as reinforced concrete construction using grades 30-40 concrete.House Assignment
House AssignmentPenny3688
油
1) The document outlines a group assignment for a construction technology and building materials course. Students must design a single-story bungalow, selecting appropriate foundation, flooring, wall, ceiling, and other structural and interior components.
2) They must then examine and explain the suitability of materials used for each space, like floors, walls, ceilings, windows, and interior furnishings.
3) Students are to creatively present their design and material analyses on A3 boards, with no more than 10 boards total. They will be graded individually based on verbal and visual presentation.Site report
Site reportPenny3688
油
The document provides a report from a site visit by a student to an ongoing construction project of 2-3 storey terrace houses. It includes an introduction to the project, objectives of the site visit, observations of construction materials and methods in use including piles, beams, columns, slabs and brickwork. Photos further describe the various components and construction stages witnessed. The student concludes it was a valuable learning experience that enhanced understanding of practical construction processes.Assignment brief for site report 
Assignment brief for site report J脹a Y脹脹
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the type of foundation and reinforced concrete grades used, explaining their advantages and disadvantages for each building element. The assignment will be assessed out of 10 marks for each module based on the objective, content, photos, and conclusion.Assignment brief for site report bqs
Assignment brief for site report bqsFelix Vong
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the type of foundation and reinforced concrete grades used, explaining their advantages and disadvantages for each building element. The assignment will be assessed out of 10 marks for each module based on the objective, content, photos, and conclusion.Assignment brief for site report 
Assignment brief for site report Liming Hiew
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the type of foundation and reinforced concrete grades used, explaining their advantages and disadvantages for each building element. The assignment will be assessed out of 10 marks for each module based on the objective, content, photos, and conclusion.Assignment brief for site report .pdf
Assignment brief for site report .pdfJ脹a Y脹脹
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total ofAssignment brief-for-site-report
Assignment brief-for-site-reportPui San
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total ofIntegrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015jordanlim96
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015KhangWei Chin
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Assignment 1 - Site Visit Report
Assignment 1 - Site Visit ReportKai Yun Pang
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015Lam Wee
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015Est
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Louise Foong
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used. The report will be assessed based on the quality of the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Darrentqn
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Lin Hui
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.(BRICK WALL) Integrated assignment m1 ct1 and bm mac 2016
(BRICK WALL) Integrated assignment m1 ct1 and bm mac 2016Sheng Zhe
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used. The report will be assessed based on the quality of the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Lam Wee
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Nicole Thain
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Areeb Amirullah
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Construction maintenance
Construction maintenanceDeepsonJohn1
油
This document provides information about a construction technology and maintenance course, including its code, credit units, contact hours, assessment structure, and lesson plan. The course aims to help students understand construction methods, techniques, and equipment used on construction sites. It covers topics like building, infrastructure, and maintenance stages; temporary and permanent works; construction plants; and latest technologies. The lesson plan lists weekly topics, learning outcomes, and lecture hours across 14 weeks. Students will learn about construction processes, equipment selection, and sustainable development techniques. The course assessments include two tests, assignments, a project report, and group presentations.NCIT civil Syllabus 2013-2014
NCIT civil Syllabus 2013-2014LAKSHITHA RAJAPAKSHA
油
This document provides information on the National Diploma for Industrial Technician module for building construction. The 60-hour module aims to enable students to supervise building construction and provision of building utility services. Key topics covered include Sri Lankan construction industry and regulations, building elements and processes, site selection and preparation, foundation types and construction, wall construction techniques, and building utility services like water, waste, and sewerage systems. The module seeks to develop students' understanding of construction processes, materials, and workmanship.Building con 1 (arc 1523) project 1 brief aug 2014
Building con 1 (arc 1523) project 1 brief aug 2014Preston Liew
油
This document outlines an assignment for a Building Construction 1 course. Students must select an ongoing construction site and document the construction process, methods, materials, and elements. They must take pictures and create annotated sketches and drawings. Their report should analyze the materials used, dimensions of components, construction procedures, and how the construction addresses the site context. Students will be assessed based on their demonstrated understanding, quality of documentation, analysis, and report format and referencing. The assignment aims to help students understand and apply principles of construction.Building con 1 (arc 1523) project 1 brief aug 2014
Building con 1 (arc 1523) project 1 brief aug 2014Anthony Chew
油
This document outlines an assignment for a Building Construction 1 course. Students must select an ongoing construction site and document the construction process, methods, materials, and elements. They must take pictures and create annotated sketches and drawings. Their report should analyze the materials used, dimensions of components, construction procedures, and how the construction addresses the site context. Students will be assessed based on their documentation, analysis, and explanation in their bound A3 report, as well as their individual component within the group work.Site Visit Report
Site Visit ReportZIyeeTan
油
The document provides a summary of a site visit report for a 25-storey mixed-use development construction project located in Kuala Lumpur, Malaysia. The summary includes that the project is being constructed by Encorp Construct Sdn. Bhd. over a 2 year period with a contract value of 101.6 million. During the site visit, the report describes various construction processes observed like bore piling, formwork, bar bending, and concrete pouring. Photos also show building materials, scaffolding, machinery, and signage. The conclusion states that the site visit helped provide practical experience of construction techniques compared to theoretical classroom learning.Building con 1 (arc1523) project 1 brief aug 2015
Building con 1 (arc1523) project 1 brief aug 2015Chow Hong Da
油
This document outlines an assignment for a Building Construction course. Students are tasked with documenting the construction process of an ongoing construction site through photos, sketches, and drawings. They must analyze and explain the materials, dimensions, and construction procedures of various building elements. Students will submit an A3 bound report of their documentation and analysis. They will be assessed based on their understanding of the project brief, quality of drawings, material presented, and communication of their understanding of the construction process.
More Related Content
Similar to Site Report (20)
Assignment brief for site report .pdf
Assignment brief for site report .pdfJ脹a Y脹脹
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total ofAssignment brief-for-site-report
Assignment brief-for-site-reportPui San
油
This document provides information and assignment briefs for a technical site visit to an Andes Construction site for three modules: Measurement 1, Construction Technology 1, and Building Materials. Students are required to submit a report by July 3rd that includes the objectives of the site visit, an introduction to the site, technical observations made on site, and how the visit helped achieve the learning outcomes. Specifically, the report must identify the foundation type and its advantages/disadvantages, explain the construction process and sequence of work observed, and identify the reinforced concrete grades used for different building elements and their advantages/disadvantages. The assignment will be assessed based on the objective, content, photos, learning outcomes, and conclusion, for a total ofIntegrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015jordanlim96
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015KhangWei Chin
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Assignment 1 - Site Visit Report
Assignment 1 - Site Visit ReportKai Yun Pang
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015Lam Wee
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm aug2015
Integrated assignment m1 ct1 and bm aug2015Est
油
This document provides an assignment brief for a site visit report on the construction of 96 terrace houses and related infrastructure in Sekyen 2A, Antara Gapi, Hulu Selangor, Selangor. Students are required to submit a report by 26 November 2015 that describes the construction process of pad footings based on their site visit. The report should include an introduction of the site, technical observations on how pad footings are constructed and the materials involved, photos and descriptions, and learning outcomes/conclusion. Marks will be given for the introduction, content, photos, and conclusion sections.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Louise Foong
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used. The report will be assessed based on the quality of the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Darrentqn
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Lin Hui
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.(BRICK WALL) Integrated assignment m1 ct1 and bm mac 2016
(BRICK WALL) Integrated assignment m1 ct1 and bm mac 2016Sheng Zhe
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used. The report will be assessed based on the quality of the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Lam Wee
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Nicole Thain
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Integrated assignment m1 ct1 and bm mac 2016
Integrated assignment m1 ct1 and bm mac 2016Areeb Amirullah
油
This document provides an assignment brief for a project video on constructing a brick wall. Students are required to submit a report analyzing the video and addressing several learning outcomes. They must describe the process of constructing a brick wall, including the bonding type used, materials like bricks and mortar, and construction method. Students should also identify the machinery, plants, and tools used in building the brick wall. Their report will be assessed based on the introduction, technical observations, photos and descriptions, and fulfillment of learning outcomes.Construction maintenance
Construction maintenanceDeepsonJohn1
油
This document provides information about a construction technology and maintenance course, including its code, credit units, contact hours, assessment structure, and lesson plan. The course aims to help students understand construction methods, techniques, and equipment used on construction sites. It covers topics like building, infrastructure, and maintenance stages; temporary and permanent works; construction plants; and latest technologies. The lesson plan lists weekly topics, learning outcomes, and lecture hours across 14 weeks. Students will learn about construction processes, equipment selection, and sustainable development techniques. The course assessments include two tests, assignments, a project report, and group presentations.NCIT civil Syllabus 2013-2014
NCIT civil Syllabus 2013-2014LAKSHITHA RAJAPAKSHA
油
This document provides information on the National Diploma for Industrial Technician module for building construction. The 60-hour module aims to enable students to supervise building construction and provision of building utility services. Key topics covered include Sri Lankan construction industry and regulations, building elements and processes, site selection and preparation, foundation types and construction, wall construction techniques, and building utility services like water, waste, and sewerage systems. The module seeks to develop students' understanding of construction processes, materials, and workmanship.Building con 1 (arc 1523) project 1 brief aug 2014
Building con 1 (arc 1523) project 1 brief aug 2014Preston Liew
油
This document outlines an assignment for a Building Construction 1 course. Students must select an ongoing construction site and document the construction process, methods, materials, and elements. They must take pictures and create annotated sketches and drawings. Their report should analyze the materials used, dimensions of components, construction procedures, and how the construction addresses the site context. Students will be assessed based on their demonstrated understanding, quality of documentation, analysis, and report format and referencing. The assignment aims to help students understand and apply principles of construction.Building con 1 (arc 1523) project 1 brief aug 2014
Building con 1 (arc 1523) project 1 brief aug 2014Anthony Chew
油
This document outlines an assignment for a Building Construction 1 course. Students must select an ongoing construction site and document the construction process, methods, materials, and elements. They must take pictures and create annotated sketches and drawings. Their report should analyze the materials used, dimensions of components, construction procedures, and how the construction addresses the site context. Students will be assessed based on their documentation, analysis, and explanation in their bound A3 report, as well as their individual component within the group work.Site Visit Report
Site Visit ReportZIyeeTan
油
The document provides a summary of a site visit report for a 25-storey mixed-use development construction project located in Kuala Lumpur, Malaysia. The summary includes that the project is being constructed by Encorp Construct Sdn. Bhd. over a 2 year period with a contract value of 101.6 million. During the site visit, the report describes various construction processes observed like bore piling, formwork, bar bending, and concrete pouring. Photos also show building materials, scaffolding, machinery, and signage. The conclusion states that the site visit helped provide practical experience of construction techniques compared to theoretical classroom learning.Building con 1 (arc1523) project 1 brief aug 2015
Building con 1 (arc1523) project 1 brief aug 2015Chow Hong Da
油
This document outlines an assignment for a Building Construction course. Students are tasked with documenting the construction process of an ongoing construction site through photos, sketches, and drawings. They must analyze and explain the materials, dimensions, and construction procedures of various building elements. Students will submit an A3 bound report of their documentation and analysis. They will be assessed based on their understanding of the project brief, quality of drawings, material presented, and communication of their understanding of the construction process.Recently uploaded (20)
Volodymyr Zelensky Thank You America Shirt
Volodymyr Zelensky Thank You America Shirtrobintex21
油
Volodymyr Zelensky Thank You America Shirt
https://www.pinterest.com/boilshop/volodymyr-zelensky-thank-you-america-shirt/
Volodymyr Zelensky Thank You America Shirt,Volodymyr Zelensky Thank You America T Shirts,Volodymyr Zelensky Thank You America SweatShirts yours today. tag and share who loves it.
Nitro Pro Crack Enterprise Free Download
Nitro Pro Crack Enterprise Free Downloadkortez3
油
Direct License file Link Below https://up-community.net/dl/
Nitro PDF Pro Crack is a reliable and multi-functional PDF tool that allows you to generate and edit PDFs and digital documents.L湛dica didactica (Report finale residenza Diego Alatorre Go_Innovation a Casa...
L湛dica didactica (Report finale residenza Diego Alatorre Go_Innovation a Casa...Casa Netural
油
Go_Innovation is a special residency for social innovator held by Netural Coop in Gorizia, European Capital of Culture 2025.
L炭dica did叩ctica / Play to Connect is a provocation to think outside the box, a methodology to board uncomfortable topics in a respectful and joyful manner and an excuse to discuss unconventional solutions to contemporary challenges, where play is seen as an attitude and game design as a metaphor of creativity by which to imagine, experiment and learn about our surroundings.
Casa Netural residency in Gorizia offered Diego an opportunity to test the ideas that he has been developing over the past years and to enrich them by looking at them from a different and complementary perspective. In other words to put theory into practice.
Along the 4 weeks that he lived in Gorizia he realized how mature and innovative his own understanding of the ludic phenomenon, as most people he connected with, found the value of his research, but what was amazing for him is how much his project was fed back from completely different and complementary perspectives.
Along these days he crafter four game ideas, with different levels of complexity and currently in different stages of development. These are described in the final report.
\\
Industrial Designer by CIDI UNAM and Master in Science of Design for Interaction by TU Delft, Diego ALatorre is currently doing a PhD in Contemporary Studies at the Center for Interdisciplinary Studies of Coimbra University.
His research explores the role of games in education: from a multimodal literacy perspective, he explores the creative process of writers, scientists, designers, artists, teachers and reflective players to learn how to critically read the world and creatively write.
Go_Innovation is a project designed and coordinated by Netural Coop Impresa Sociale within the framework of A THOUSAND YEARS OF HISTORY AT THE CENTER OF EUROPE: CASTLE BORGO CROCEVIA OF PEOPLES AND CULTURES, funded by PNRR - Next Generation EU, for the PNRR pilot project M1C3 Measure 2 Investment 2.1 line A - CUP F88F220000007 LABUAN4D EXCLUSIVE SERVER STAR GAMING ASIA NO.1 TERPOPULER DI INDONESIA ! Ras...
LABUAN4D EXCLUSIVE SERVER STAR GAMING ASIA NO.1 TERPOPULER DI INDONESIA ! Ras...PESO4D MANJA
油
LABUAN4D EXCLUSIVE SERVER STAR GAMING ASIA NO.1 TERPOPULER DI INDONESIA ! Rasakan WD Max-Win Di : LABUAN4D https://heylink.me/labuan4dCh 12 Sound 2.pptbhcycygucuhbmmmmmntydtscudbddibudbd7dbdudbudbdudvdydvs6evs7v...
Ch 12 Sound 2.pptbhcycygucuhbmmmmmntydtscudbddibudbd7dbdudbudbdudvdydvs6evs7v...samtheg92
油
Very enthusiastic 
The CLEAR Brands CLEAR EFX Branding Guide
The CLEAR Brands CLEAR EFX Branding GuideAdriana Yankey
油
A branding guide I designed for The CLEAR Brands around their EFX lineThe_Canvas_of_Creative_Mastery_Newsletter_February_2025
The_Canvas_of_Creative_Mastery_Newsletter_February_2025AmirYakdi
油
Explore global ad gems, enrich with case studies, tap into tech trends, and unveil our latest masterpieces. USER PERSONA FOR ASIWAJU AHMED TINUBU.pdf
USER PERSONA FOR ASIWAJU AHMED TINUBU.pdfmodele dawodu
油
USER PERSONA PROFILE FOR INTERIOR DESIGN STYLES Smart Farming Technology Pitch Deck Presentation Template
Smart Farming Technology Pitch Deck Presentation Template際際滷sBrain
油
Looking to revolutionize agriculture with cutting-edge technology? Our Smart Farming Technology Pitch Deck is designed to help you present your innovative ideas with clarity and impact!
Professionally designed slides
Easy-to-edit and fully customizable
Perfect for startups, investors, and agritech businesses
Download now & impress your audience!
Need a custom design? Contact us at info@slidesbrain.com
際際滷sBrain Free PowerPoint Templates & Custom Design Services
#SmartFarming #AgriTech #PitchDeck #StartupPitch #FarmingInnovation #InvestorPresentation #AgricultureTechnology #際際滷sBrain
IDM Crack 6.42 Build 27 Patch With Activation Key
IDM Crack 6.42 Build 27 Patch With Activation Keyjamaal karmaanii
油
Direct License file Link Below
https://up-community.net/dl/
Internet Download Manager (IDM) Crack 6.42 Build 27 Patch With Activation Key is a device to develop download speeds by to numerous occasions, resume and timetable downloads. Complete error recovery and resume capacity will restart broken or interfered with downloads due to lost affiliations, compose issues, PC shutdowns, or unexpected power outages. Essential practical UI makes IDM straightforward and easy to use
7 Tips To Take Your Design To The Next Level!
7 Tips To Take Your Design To The Next Level!kritika598289
油
Want to take your designs to the next level?
From choosing the right fonts and colors to maintaining consistency and alignment, these small tweaks can have a big impact.
Which of these design principles do you already use? Let me know in the comments!
Follow for more design insights and creative strategies!Site Report
- 1. 油 1 油 油 油 SCHOOL OF ARCHITECTURE, BUILDING & DESIGN BACHELOR OF QUANTITY SURVEYING (HONOURS) MEASUREMENT I (QSB 60104) CONSTRUCTION TECHNOLOGY I (BLD 60104) BUILDING MATERIALS (BLD 62003) PROJECT TITLE: Cadangan pembinaan 42 unit rumah teres di Taman Impian Murni (Lot 3607), Jalan Tanjung Balai (Lorong Haji Yusof), 30/236, bersama satu unit pencawang elektrik padat di atas Lot 3607 (GM2726), Seksyen 30, 40460 Shah Alam, Selangor. Marks: 10 marks for each module Assignment Date: 23/11/2016 Submission Date: 29/11/2016, 12pm @ Block C, Level 5 Learning Outcomes Understand the basics of the construction process and witness the usage of construction equipments on site including mechanical plants. Explore and identify various types of building materials and technology on site. Awareness of the importance of safety on site and understanding of safety problems and site conditions. Exposure to actual working environment on site including uncertainty circumstances e.g. weather
- 2. 油 2 油 油 Assignment Brief The site visit will expose the students to site conditions where they will be able to describe, explain and understand the method and process of construction in accordance to the sequence of work on site. This is a report on a site visit to a construction site incorporating all the learning outcomes of the site visit, the introduction of the site and technical observations made on site. For this report, students are required to study on a CONCRETE FRAMED BUILDING. Items to be considered are: a) What are the items in the site that are considered as a concrete frame? Describe the items. b) What are the materials involved in constructing a concrete framed structure that have been identified above? Assessment Criteria (10 marks for each module) Breakdown of marks are: Introduction of the site visit : 1 Content/ Technical observations : 6 Photos and descriptions : 2 Learning outcomes/ Conclusion : 1 END OF ASSIGNMENT BRIEF