Доклад Буюна Игоря Станиславовича (инженера-технолога I категории ОСНТиП ОП "...ValeriiVОБСЛЕДОВАНИЕ ЯДЕРНОГО ТОПЛИВА С ПОМОЩЬЮ СТЕНДА ИНСПЕКЦИИ И РЕМОНТА ТОПЛИВА, ПОВЫШЕНИЕ БЕЗОПАСНОЙ ЭКСПЛУАТАЦИИ ТВС НА АЭС УКРАИНЫ
Результати досліджень ÚJV Řež, a. s. щодо стратегії IVMR та можливості її зас...Ukrainian Nuclear SocietyПрезентація технічного директора міжнародних проектів ÚJV Řež, a. s. Володимира Кргоунека в рамках Міжнародної конференції з нагоди 10-річчя АУЯФ "Український ядерний форум 2019: ядерна енергетика - стан та тенденції розвитку"
Доклад Анатолия Безрученко (заместителя начальника цеха по ремонту тепломехан...ValeriiVМодификация главного разъема ГЦН-195М с переходом на уплотнения из гребенчатых прокладок с двухсторонней графитовой пленкой
Весняна школа Енергоатома-2019 — «Продовження терміну експлуатації енергоблок...НАЕК «Енергоатом»Весняна школа Енергоатома-2019 — «Продовження терміну експлуатації енергоблоків АЕС України», головний спеціаліст відділу конструкційної міцності ВП «Науково-технічний центр» Микола Зарицький
Досвід експлуатації змішаних активних зон з використанням палива альтернативн...НАЕК «Енергоатом»Презентація на VIII Міжнародній науково-практичній конференції з культури безпеки на АЕС, яка відбулася 29-30 березня 2017 року Києві
День атомної енергетики 2015. "Продовження ресурсу та модернізація енергоблок...НАЕК «Енергоатом»Презентація Сергія Тараканова, заступника директора з продовження експлуатації НАЕК "Енергоатом"
День атомної енергетики 2014. Продовження терміну експлуатації енергоблоків т...НАЕК «Енергоатом»День атомної енергетики 2014. Продовження терміну експлуатації енергоблоків та модернізація «9 блоків за 6 років». Тараканов Сергій Олександрович, заступник директора з продовження експлуатації ДП НАЕК «Енергоатом»
Досвід впровадження у ВП «ЮУАЕС» організаційно-технічних заходів в частині ко...НАЕК «Енергоатом»Презентація на VIII Міжнародній науково-практичній конференції з культури безпеки на АЕС, яка відбулася 29-30 березня 2017 року Києві
innovative reactors' passive systemsmyatomПАССИВНЫЕ СИСТЕМЫ БЕЗОПАСНОСТИ
ИННОВАЦИОННЫХ ПРОЕКТОВ АЭС
Бахметьев А.М., Большухин М.А., Хизбуллин А.М., Соколов А.Н.
ОКБМ
III международная научно-практическая конференция
«АЭС: ПРОЕКТИРОВАНИЕ, СТРОИТЕЛЬСТВО, ЭКСПЛУАТАЦИЯ»
1 декабря 2009 года
Весняна школа-2016: лекція Миколи Зарицького і Юрія ЧерепановаНАЕК «Енергоатом»Четверта лекція Весняної школи-2016. Заступник директора з нових ядерних установок – начальник управління головних фахівців ВП “Атомпроектінжиніринг” Юрій Черепанов розповідає про зведення нових енергоблоків в Україні
Впровадження стенду інспекції і ремонту палива (СІРТ) як бар'єру безпеки вико...НАЕК «Енергоатом»Впровадження стенду інспекції і ремонту палива (СІРТ) як бар'єру безпеки використання палива Westinghouse Electric Company. Буюн І.С., ВП «АРС»
Весняна школа-2016: лекція Миколи Зарицького НАЕК «Енергоатом»Четверта лекція Весняної школи-2016. Микола Зарицький, заступник директора департаменту управління продовженням експлуатації, розповідає про технічні аспекти та основні принципи діяльності з продовження строків експлуатації енергоблоків українських АЕС
Презентация мини-ТЭЦ на 6МВтgram2002Проект строительства отходоперерабатывающих экологически чистых комплексов (мини –ТЭЦ) на основе
плазменно-водородной газификации
Продовження терміну експлуатації енергоблоків АЕС України - Микола ЗарицькийEnergoatom-schoolВесняна школа НАЕК Енергоатом
Тема лекції: Продовження терміну експлуатації енергоблоків АЕС України.
Лектор: Микола Зарицький
10 years of experience with Westinghouse fuel at NPP TemelinmyatomWestinghouse fuel has been used at the Temelin NPP for 10 years. Some key points include:
- The first Westinghouse fuel assembly was loaded in 2000 and the plant achieved first criticality 3 months later. There have been 15 fuel cycles representing 960 fuel assemblies.
- Issues encountered include incomplete rod insertions, fuel assembly bowing and growth, and leaking fuel rods. Modifications to fuel assembly designs have helped address these issues.
- A post-irradiation inspection program provided data on fuel performance to support continued licensing of new fuel designs. While visual examinations showed little corrosion, measurements revealed unexpected fuel assembly twisting and bowing.
What is Rosatom?Andrey OzharovskyA critical view on Russian State Nuclear Corporation <rosatoim>. Presentation by Andrey Ozharovsky in Pyhäjoki, Finland on 13-06-2015
Весняна школа Енергоатома-2019 — «Продовження терміну експлуатації енергоблок...НАЕК «Енергоатом»Весняна школа Енергоатома-2019 — «Продовження терміну експлуатації енергоблоків АЕС України», головний спеціаліст відділу конструкційної міцності ВП «Науково-технічний центр» Микола Зарицький
Досвід експлуатації змішаних активних зон з використанням палива альтернативн...НАЕК «Енергоатом»Презентація на VIII Міжнародній науково-практичній конференції з культури безпеки на АЕС, яка відбулася 29-30 березня 2017 року Києві
День атомної енергетики 2015. "Продовження ресурсу та модернізація енергоблок...НАЕК «Енергоатом»Презентація Сергія Тараканова, заступника директора з продовження експлуатації НАЕК "Енергоатом"
День атомної енергетики 2014. Продовження терміну експлуатації енергоблоків т...НАЕК «Енергоатом»День атомної енергетики 2014. Продовження терміну експлуатації енергоблоків та модернізація «9 блоків за 6 років». Тараканов Сергій Олександрович, заступник директора з продовження експлуатації ДП НАЕК «Енергоатом»
Досвід впровадження у ВП «ЮУАЕС» організаційно-технічних заходів в частині ко...НАЕК «Енергоатом»Презентація на VIII Міжнародній науково-практичній конференції з культури безпеки на АЕС, яка відбулася 29-30 березня 2017 року Києві
innovative reactors' passive systemsmyatomПАССИВНЫЕ СИСТЕМЫ БЕЗОПАСНОСТИ
ИННОВАЦИОННЫХ ПРОЕКТОВ АЭС
Бахметьев А.М., Большухин М.А., Хизбуллин А.М., Соколов А.Н.
ОКБМ
III международная научно-практическая конференция
«АЭС: ПРОЕКТИРОВАНИЕ, СТРОИТЕЛЬСТВО, ЭКСПЛУАТАЦИЯ»
1 декабря 2009 года
Весняна школа-2016: лекція Миколи Зарицького і Юрія ЧерепановаНАЕК «Енергоатом»Четверта лекція Весняної школи-2016. Заступник директора з нових ядерних установок – начальник управління головних фахівців ВП “Атомпроектінжиніринг” Юрій Черепанов розповідає про зведення нових енергоблоків в Україні
Впровадження стенду інспекції і ремонту палива (СІРТ) як бар'єру безпеки вико...НАЕК «Енергоатом»Впровадження стенду інспекції і ремонту палива (СІРТ) як бар'єру безпеки використання палива Westinghouse Electric Company. Буюн І.С., ВП «АРС»
Весняна школа-2016: лекція Миколи Зарицького НАЕК «Енергоатом»Четверта лекція Весняної школи-2016. Микола Зарицький, заступник директора департаменту управління продовженням експлуатації, розповідає про технічні аспекти та основні принципи діяльності з продовження строків експлуатації енергоблоків українських АЕС
Презентация мини-ТЭЦ на 6МВтgram2002Проект строительства отходоперерабатывающих экологически чистых комплексов (мини –ТЭЦ) на основе
плазменно-водородной газификации
Продовження терміну експлуатації енергоблоків АЕС України - Микола ЗарицькийEnergoatom-schoolВесняна школа НАЕК Енергоатом
Тема лекції: Продовження терміну експлуатації енергоблоків АЕС України.
Лектор: Микола Зарицький
10 years of experience with Westinghouse fuel at NPP TemelinmyatomWestinghouse fuel has been used at the Temelin NPP for 10 years. Some key points include:
- The first Westinghouse fuel assembly was loaded in 2000 and the plant achieved first criticality 3 months later. There have been 15 fuel cycles representing 960 fuel assemblies.
- Issues encountered include incomplete rod insertions, fuel assembly bowing and growth, and leaking fuel rods. Modifications to fuel assembly designs have helped address these issues.
- A post-irradiation inspection program provided data on fuel performance to support continued licensing of new fuel designs. While visual examinations showed little corrosion, measurements revealed unexpected fuel assembly twisting and bowing.
What is Rosatom?Andrey OzharovskyA critical view on Russian State Nuclear Corporation <rosatoim>. Presentation by Andrey Ozharovsky in Pyhäjoki, Finland on 13-06-2015
Advanced Designs of VVER Reactor PlantmyatomThe document discusses the evolution and advanced designs of VVER reactors. It describes the current challenges facing nuclear power plants and how generation 3+ designs, such as the VVER-1200, aim to address these through extended lifetimes, reduced costs and construction times. Future innovative designs discussed include the VVER-600, VVER-SCP generation 4 supercritical water cooled reactor, and concepts using tight fuel assemblies for a closed nuclear fuel cycle. The VVER-1200 design for project AES-2006 forms the basis for the further developed MIR-1200 design being implemented in the Czech Republic.
Temelin power upratemyatomThis document discusses the power uprate project at the NPP Temelín nuclear power plant in the Czech Republic. The project aims to increase the reactor thermal power from 3000 MWt to 3120 MWt and install new turbine low pressure parts to boost the generator output from 1016 MWe to 1081 MWe. The project will be carried out through analytical evaluations, core design updates, safety analysis revisions, and minor equipment modifications. It is scheduled to be implemented at Unit 1 in 2012 while ensuring the plant's safety criteria and limits remain unchanged.
VVER core catcherpsa_epsThis document summarizes analytical and experimental studies conducted for the development of a core catcher to contain molten core materials in the event of a severe nuclear accident. It describes severe accident analysis, management procedures, and the application of a core catcher. It then summarizes international projects on severe accident measures and development. The document outlines studies on melt stratification and distribution between layers under inert atmosphere. It also describes experiments on control rod materials effects and interactions. Finally, it provides details on the design of a core catcher for a specific nuclear reactor and lists several patents related to core catcher designs and sacrificial materials.
Key Features of MIR.1200 (AES-2006) design and current stage of Leningrad NP...myatomThe document discusses the key features and current construction status of the MIR.1200/AES-2006 nuclear power plant design and Leningrad NPP-2, which uses this design. The MIR.1200 design is an evolution of previous VVER reactor designs with improved safety features like a double containment structure and passive safety systems. Leningrad NPP-2 Units 1 and 2 are currently under construction in Russia using this design. The design provides enhanced safety, economics, and project attractiveness through an evolutionary approach and leveraging designs already implemented in other plants.
TVSA-T fuel assembly for “Temelin” NPP. Main results of design and safety ana...myatomThe document summarizes the design and safety analyses of the TVSA-T fuel assembly developed for the Temelin NPP in the Czech Republic. Key points include:
1) TVSA-T is based on the proven TVSA design with additional modifications like combined spacer grids and a longer fuel column.
2) Extensive testing and analyses were conducted to validate the TVSA-T design including thermohydraulic tests, mechanical tests, and safety analyses.
3) The design was successfully licensed for use at Temelin NPP unit 1 and meets all safety criteria for normal operation and accident conditions.
Підвищення безпеки експлуатації РУ ВВЭР-440 з впровадженням паливадругого пок...НАЕК «Енергоатом»Презентація на VIII Міжнародній науково-практичній конференції з культури безпеки на АЕС, яка відбулася 29-30 березня 2017 року Києві
Експлуатація змішаних активних зон з паливом «Вестінгауз» на АЕС УкраїниНАЕК «Енергоатом»Акіф Мірдадаш Абдуллаєв огли головний інженер проекту Національного наукового центру «Харківський фізико-технічний інститут»
Експлуатація змішаних активних зон з паливом «Вестінгауз» на АЕС УкраїниUkrainian Nuclear SocietyАкіф Мірдадаш Абдуллаєв огли, Головний інженер проекту Національного наукового центру «Харківський фізико-технічний інститут»
День атомної енергетики 2017: Віктор Швецов - Інвестиційні рішення ПАТ «Турбо...НАЕК «Енергоатом»День атомної енергетики 2017: Віктор Швецов, головний конструктор парових турбін ПАТ «Турбоатом» - Інвестиційні рішення ПАТ «Турбоатом» в галузі атомного турбінобудування
«Инновационные решения при производстве турбогенераторов для распределенной э...BDAАртемов Александр Владимирович, заместитель директора по продажам ПАО НПО «ЭЛСИБ» «Инновационные решения при производстве турбогенераторов для распределенной энергетики»
Продовження строку експлуатації енергоблоків АЕС УкраїниНАЕК «Енергоатом»29 березня 2018 року пройшов черговий день лекцій освітнього проекту "Весняна школа НАЕК "Енергоатом", у рамках якого Микола Зарицький, головний спеціаліст відділу конструкційної міцності ВП "Науково-технічний центр" ДП "НАЕК "Енергоатом", розповів учасникам Школи про продовження строку експлуатації енергоблоків АЕС України.
BWR FukushimamyatomThe document summarizes the major systems and components of a boiling water reactor (BWR) plant. It describes the reactor vessel internals that produce steam from heating water, the moisture separators and dryers, main turbine system that converts steam to electricity, and emergency core cooling systems. The BWR uses circulating water to transfer heat from the reactor core to power the main turbine, and has safety systems to inject water into the reactor vessel in the event of a loss of coolant accident.
Updated plant costs 2010myatomThis document summarizes updated capital cost estimates for various electricity generation technologies that were commissioned by the U.S. Energy Information Administration. Key findings include that overnight capital costs for coal and nuclear plants are 25-37% higher than prior estimates, while natural gas costs remained similar. Solar photovoltaic costs declined 25% due to larger plant sizes and lower component costs. Onshore wind costs increased 21%, while offshore wind costs increased 50% to reflect first-of-a-kind U.S. project costs. Geothermal and biomass costs also increased versus prior estimates. These updated cost estimates will be used in EIA's modeling and analysis of technology choices in the electric power sector.
Banyuk vver 2010myatomThis document discusses materials used for equipment in reactor plants V-320 and V-491. It provides details on the reactor pressure vessel such as dimensions, mass, and steel grades used for different components. It also discusses how materials were improved for V-491 to decrease radiation embrittlement and increase brittle fracture resistance. Surveillance programs and specifications for specimens are outlined to monitor changes in pressure vessel material properties during operation. Regulatory requirements for equipment design, welding, and inspections are also summarized.
Rothwell Braun THE COST STRUCTURE OF INTERNATIONAL URANIUM ENRICHMENT SERVICE...myatomThis document analyzes the international uranium enrichment services market. It finds that as older gaseous diffusion plants are retired, the supply curve will shift, lowering prices. By 2015, prices could drop 41% to $80/SWU from $135/SWU in 2005 due to increased centrifuge capacity. However, lower prices may decrease profits and investment incentives, so some market intervention may be needed to control prices and discourage proliferation of enrichment technology to non-fuel states.
MIT Nuclear fuel cycle 2010myatomThis document is a summary report from an MIT study on the future of the nuclear fuel cycle. It provides an overview of the study participants and advisory committee members. The report is divided into several chapters that examine issues related to uranium resources, spent nuclear fuel management, waste management, fuel cycle analyses, economics, nonproliferation, fuel cycle technologies, public attitudes, and recommended research programs. It aims to provide guidance on key technical choices for an expanded nuclear power program in the US.
Policy Challenges of Nuclear Reactor Construction: Cost Escalation and Crowd...myatomThis document analyzes the policy challenges of nuclear reactor construction, specifically cost escalation and crowding out of alternatives. It examines these issues through a comparison of the US and French nuclear industries and statistical analysis. The key findings are:
1) Both the US and French nuclear industries experienced severe and persistent cost escalation for new reactor construction, with actual costs greatly exceeding initial projections.
2) Commitment to nuclear power appears to have crowded out investment in energy efficiency and renewable alternatives in both countries. States without plans for new nuclear reactors have achieved more with efficiency and renewables.
3) Nuclear power is substantially more costly than alternatives like efficiency and renewable energy. However, the US has significantly greater potential for developing
Nuclear New build Unveiled by ADLmyatomThis document discusses nuclear new build projects around the world. It provides statistics on the number of nuclear power reactors currently under construction, contracted or planned. It also analyzes trends and challenges in the nuclear industry regarding new build projects. The key points are:
- Over 150 new build projects are competing globally to construct over 500 nuclear reactors in the next two decades.
- The largest growth is expected between now and 2030, with a potential compound annual growth rate of 12% in new reactor commissions.
- Managing the complexity of nuclear new build projects poses significant technical and management challenges given tight schedules and limited experience of many project teams.
- Successful project management is critical given the huge investments involved, which could exceed thousands of
Small Modular Reactors conferencemyatomThe document advertises an upcoming conference on June 28-29, 2010 about small modular nuclear reactors. It provides an agenda for the two-day conference including topics on developing small reactor designs, licensing issues, business outlook and international development. It also lists sponsors and participating organizations. Registering before May 21, 2010 saves $300 on the conference fee.
Топливо ВВЭР: Совершенствование технологии изготовления и конструкции, опыт изготовления, результаты эксплуатации
1. Топливо ВВЭР: Совершенствование технологииТопливо ВВЭР: Совершенствование технологии
изготовления и конструкции, опыт изготовления,изготовления и конструкции, опыт изготовления,
результаты эксплуатациирезультаты эксплуатации
«ВВЭР-2010, Опыт и Перспективы», 1-3 ноября, Прага.
П.М. Аксенов, Ю.С. Шульман, И.В. Асатиани
9. Цели создания новой бесчехловой рабочей
кассеты РК-3
Улучшение технико-экономических показателей
использования топлива в 6 годичном топливном цикле
Повышение конкурентоспособности российского
топлива ВВЭР-440 на мировом рынке
9
10. Основные конструктивные особенности РК-3
Каркасная конструкция РК-3 с девятью ДР
Оптимизированное водо-урановое отношение и
уменьшенное количество циркония в активной зоне
Тонкостенные уголки из циркониевого сплава Э635 с
повышенными механическими характеристиками
Увеличенная загрузка топлива за счёт изменения
геометрических размеров таблетки
Унифицированные с ВВЭР-1000 верхние и нижние заглушки
Высокоточные арочные ДР с шагом 12,6 мм
Укороченная головка с пружинами с улучшенными
характеристиками
10
13. Результаты работ по освоению РК-3
Изготовлена опытная партия РК-3 в количестве 12 шт
Проведены приемочные испытания
Начата опытно-промышленная эксплуатация на 4
блоке Кольской АЭС
13
15. 15
Основные задачи, решенные при освоении ТВСА-Т
• Отработка конструкции и технологии изготовления несущего
каркаса из уголков и ДР
• Получение высокоточных арочных ДР
• Получение пластин перемешивающих решеток
• Отработка конструкции и технологии изготовления
перемешивающих решеток
• Отработка конструкции и технологии изготовления основных
узлов и компонентов ТВСА-Т, включая твэл нового поколения
• Получение стального пружинного фиксатора твэла отвечающего
заданным требованиям
• Получение заданной микроструктуры таблеток со средним
зерном более 25 мкм
17. 17
Головка
Отработана конструкция и технология изготовления
съемной, модернизированной головки укороченной
длины
Крепление головки на направляющих каналах
обеспечивается при помощи цанг