This document discusses forces, how forces combine, and how friction affects motion. It defines a force as a push or pull and describes how forces have direction and size measured in newtons. It explains that net force is determined by adding all forces acting on an object and can cause a change in motion. The document also defines types of friction like static and kinetic friction and describes how friction opposes motion between surfaces. It discusses factors that affect friction like roughness and applied force between surfaces.
Forces can be pushes or pulls that have both direction and size. A net force is the sum of all individual forces acting on an object. An object will change its motion if the net force is not balanced, or not equal to zero Newtons. Friction opposes the motion between two touching surfaces and depends on factors like roughness and the force pushing the surfaces together. It can be advantageous by allowing us to walk or disadvantages by causing wear on machine parts.
This document discusses forces, how forces combine, and how friction affects motion. It defines a force as a push or pull and describes how the direction and size of forces are measured. It explains that the net force on an object is determined by adding all individual forces together, and that a net force is needed to change an object's motion. The document also defines friction as the force that opposes the motion of two touching surfaces, and describes the different types of friction and how friction can be both helpful and harmful.
This document summarizes key concepts about forces and motion from a physics textbook chapter. It defines a force as a push or pull that can cause motion or change an object's speed or direction. There are four main types of friction: static, sliding, rolling, and fluid friction. Gravity pulls objects downward toward Earth's center, while air resistance opposes the downward motion of falling objects. A projectile follows a curved path due to the combination of its initial forward velocity and gravity pulling it downward.
Forces can be pushes or pulls that have both direction and size, measured in newtons. Multiple forces on an object combine as a net force; a net force causes changes in motion. Friction opposes the motion of objects in contact and depends on surface roughness and the force pressing surfaces together. There are two types of friction: kinetic friction during motion, and static friction before motion occurs. Lubricants and rolling can reduce friction between surfaces.
This document defines and explains various types of forces including vector forces, Newtons as a unit of force measurement, net force as the sum of all forces acting on an object, and the effects of balanced and unbalanced forces. It also discusses elastic forces like compression and tension, friction which opposes motion, and equilibrium as a state where balanced forces cause no changes in motion. Types of friction like static, sliding, rolling, and fluid friction are defined with examples.
This document discusses different types of forces. It explains that gravity, the ground, air, and your own body exert forces on you at all times. Forces can cause objects to move, change speed or direction. Gravity pulls objects down, while surfaces push up. Friction opposes motion and can slow or stop objects. Net force is calculated by adding or subtracting different forces on an object. Balanced forces result in no motion, while unbalanced forces cause motion.
Forces act on objects in different ways:
1. Forces are pushes or pulls that can cause an object to start or stop moving in a certain direction.
2. If the forces on an object are balanced, the object will remain at rest or maintain a constant speed and direction of motion.
3. If forces are unbalanced, the object will accelerate in the direction of the greater net force.
Newton's three laws of motion describe the relationship between forces and motion:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force.
3) For every action, there is an equal and opposite reaction.
The document discusses forces of friction and gravity. It begins with an agenda for the lesson, which includes demonstrations on friction, notes on friction and gravity, and an activity. The notes define friction as the force that opposes the sliding motion of surfaces in contact, and gravity as the force that attracts objects toward each other. It describes how mass and distance affect the gravitational force between objects. Friction and gravity can both affect the speed and direction of an object. The lesson concludes with challenges applying understanding of balance and center of gravity.
This document discusses Newton's laws of motion and forces. It defines force as a push or pull and describes different types of forces including contact forces and field forces. Mass is defined as the amount of matter in an object, while weight is the force on an object due to gravity. Net force is determined by combining all forces acting on an object. Free-body diagrams are used to represent the forces acting on an object. Friction and other concepts such as static equilibrium, kinetic friction, and terminal velocity are also explained.
The document discusses forces and friction. It begins by stating the learning objectives of identifying forces on objects using free body diagrams and explaining the effects of friction. It then defines different types of forces - contact forces like normal reaction and tension, and non-contact forces like gravitational, electric, and magnetic. It also discusses how to draw free body diagrams and examples like a crate held by a string. Finally, it defines friction as the opposing contact force and discusses how friction affects motion, giving examples like braking a car. It ends by stating some factors that affect the frictional force between surfaces.
types-of-forces.pptxx for science reviewervinzbayudan
油
The document defines different types of forces:
- Applied forces act on objects due to direct contact from another object or person. Gravity pulls objects with mass towards each other. Normal forces prevent objects from passing through surfaces they contact. Friction resists the motion of surfaces in contact and sliding against each other. Spring forces restore compressed or stretched springs back to equilibrium. Drag forces resist the motion of objects moving through fluids. Magnetic, electric, and inertia forces also act on charged or moving objects. Newton's First Law of Motion describes inertia, where objects at rest stay at rest and objects in motion stay in motion with constant velocity unless acted on by unbalanced forces.
Forces can start, stop, or change the motion of objects. There are two main types of forces - contact forces, which require touching objects, like pushing or pulling, and non-contact forces, which act over a distance without touching, like magnetic or gravitational forces. Forces are measured in units called newtons. Forces can be balanced, where opposing forces cancel each other out, or unbalanced, where a net force causes motion or changes the motion of an object. Mass is a measure of the amount of matter in an object, while weight is the force of gravity acting on an object's mass.
Force and motion in Kepler's planetariesJohnDaveYbaez
油
An unbalanced force is needed to change an object's motion. Balanced forces occur when the net force is zero and there will be no motion. Unbalanced forces occur when the net force is greater than zero, causing motion. An object's mass affects its inertia, with more massive objects being harder to move or change the speed/direction of. Gravity and friction also affect motion, with gravity providing a downward force and friction opposing motion between surfaces. Students conduct a penny lab investigating these concepts through balanced and unbalanced forces on a penny.
An unbalanced force is needed to change an object's motion. Balanced forces occur when the net force is zero and there will be no motion. Unbalanced forces occur when the net force is greater than zero, causing motion. An object's mass affects its inertia, with more massive objects being harder to move or change the speed/direction of. Gravity and friction also affect motion, with gravity providing a downward force and friction opposing motion between surfaces. Students conduct a penny lab investigating balanced and unbalanced forces related to gravity, inertia, and friction.
A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is an interaction between two objects, there is a force upon each of the objects. When the interaction ceases, the two objects no longer experience the force. Forces only exist as a result of an interaction.
A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is an interaction between two objects, there is a force upon each of the objects. When the interaction ceases, the two objects no longer experience the force. Forces only exist as a result of an interaction.
This document defines and explains the concept of forces. It states that a force is a push or pull exerted by one object on another. Forces have both magnitude and direction and are measured in Newtons. The net force on an object is the combination of all individual forces acting on it, which determines if and how the object's motion changes. Unbalanced net forces cause changes in motion, while balanced opposing forces of equal magnitude produce no net force and no change in motion.
"Zen and the Art of Industrial Construction"
Once upon a time in Gujarat, Plinth and Roofs was working on a massive industrial shed project. Everything was going smoothlyblueprints were flawless, steel structures were rising, and even the cement was behaving. That is, until...
Meet Ramesh, the Stressed Engineer.
Ramesh was a perfectionist. He measured bolts with the precision of a Swiss watchmaker and treated every steel beam like his own child. But as the deadline approached, Rameshs stress levels skyrocketed.
One day, he called Parul, the total management & marketing mastermind.
Ramesh (panicking): "Parul maam! The roof isn't aligning by 0.2 degrees! This is a disaster!"
Parul (calmly): "Ramesh, have you tried... meditating?"
、 Ramesh: "Meditating? Maam, I have 500 workers on-site, and you want me to sit cross-legged and hum Om?"
Parul: "Exactly. Mystic of Seven can help!"
Reluctantly, Ramesh agreed to a 5-minute guided meditation session.
He closed his eyes.
鏝 He breathed deeply.
He chanted "Om Namah Roofaya" (his custom version of a mantra).
When he opened his eyes, a miracle happened!
ッ His mind was clear.
The roof magically aligned (okay, maybe the team just adjusted it while he was meditating).
And for the first time, Ramesh smiled instead of calculating load capacities in his head.
Lesson Learned: Sometimes, even in industrial construction, a little bit of mindfulness goes a long way.
From that day on, Plinth and Roofs introduced tea breaks with meditation sessions, and productivity skyrocketed!
Moral of the story: "When in doubt, breathe it out!"
#PlinthAndRoofs #MysticOfSeven #ZenConstruction #MindfulEngineering
. マ留 裡留略龍侶: Foundation Analysis and Design: Single Piles
Welcome to this comprehensive presentation on "Foundation Analysis and Design," focusing on Single PilesStatic Capacity, Lateral Loads, and Pile/Pole Buckling. This presentation will explore the fundamental concepts, equations, and practical considerations for designing and analyzing pile foundations.
We'll examine different pile types, their characteristics, load transfer mechanisms, and the complex interactions between piles and surrounding soil. Throughout this presentation, we'll highlight key equations and methodologies for calculating pile capacities under various conditions.
This document discusses different types of forces. It explains that gravity, the ground, air, and your own body exert forces on you at all times. Forces can cause objects to move, change speed or direction. Gravity pulls objects down, while surfaces push up. Friction opposes motion and can slow or stop objects. Net force is calculated by adding or subtracting different forces on an object. Balanced forces result in no motion, while unbalanced forces cause motion.
Forces act on objects in different ways:
1. Forces are pushes or pulls that can cause an object to start or stop moving in a certain direction.
2. If the forces on an object are balanced, the object will remain at rest or maintain a constant speed and direction of motion.
3. If forces are unbalanced, the object will accelerate in the direction of the greater net force.
Newton's three laws of motion describe the relationship between forces and motion:
1) An object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force.
3) For every action, there is an equal and opposite reaction.
The document discusses forces of friction and gravity. It begins with an agenda for the lesson, which includes demonstrations on friction, notes on friction and gravity, and an activity. The notes define friction as the force that opposes the sliding motion of surfaces in contact, and gravity as the force that attracts objects toward each other. It describes how mass and distance affect the gravitational force between objects. Friction and gravity can both affect the speed and direction of an object. The lesson concludes with challenges applying understanding of balance and center of gravity.
This document discusses Newton's laws of motion and forces. It defines force as a push or pull and describes different types of forces including contact forces and field forces. Mass is defined as the amount of matter in an object, while weight is the force on an object due to gravity. Net force is determined by combining all forces acting on an object. Free-body diagrams are used to represent the forces acting on an object. Friction and other concepts such as static equilibrium, kinetic friction, and terminal velocity are also explained.
The document discusses forces and friction. It begins by stating the learning objectives of identifying forces on objects using free body diagrams and explaining the effects of friction. It then defines different types of forces - contact forces like normal reaction and tension, and non-contact forces like gravitational, electric, and magnetic. It also discusses how to draw free body diagrams and examples like a crate held by a string. Finally, it defines friction as the opposing contact force and discusses how friction affects motion, giving examples like braking a car. It ends by stating some factors that affect the frictional force between surfaces.
types-of-forces.pptxx for science reviewervinzbayudan
油
The document defines different types of forces:
- Applied forces act on objects due to direct contact from another object or person. Gravity pulls objects with mass towards each other. Normal forces prevent objects from passing through surfaces they contact. Friction resists the motion of surfaces in contact and sliding against each other. Spring forces restore compressed or stretched springs back to equilibrium. Drag forces resist the motion of objects moving through fluids. Magnetic, electric, and inertia forces also act on charged or moving objects. Newton's First Law of Motion describes inertia, where objects at rest stay at rest and objects in motion stay in motion with constant velocity unless acted on by unbalanced forces.
Forces can start, stop, or change the motion of objects. There are two main types of forces - contact forces, which require touching objects, like pushing or pulling, and non-contact forces, which act over a distance without touching, like magnetic or gravitational forces. Forces are measured in units called newtons. Forces can be balanced, where opposing forces cancel each other out, or unbalanced, where a net force causes motion or changes the motion of an object. Mass is a measure of the amount of matter in an object, while weight is the force of gravity acting on an object's mass.
Force and motion in Kepler's planetariesJohnDaveYbaez
油
An unbalanced force is needed to change an object's motion. Balanced forces occur when the net force is zero and there will be no motion. Unbalanced forces occur when the net force is greater than zero, causing motion. An object's mass affects its inertia, with more massive objects being harder to move or change the speed/direction of. Gravity and friction also affect motion, with gravity providing a downward force and friction opposing motion between surfaces. Students conduct a penny lab investigating these concepts through balanced and unbalanced forces on a penny.
An unbalanced force is needed to change an object's motion. Balanced forces occur when the net force is zero and there will be no motion. Unbalanced forces occur when the net force is greater than zero, causing motion. An object's mass affects its inertia, with more massive objects being harder to move or change the speed/direction of. Gravity and friction also affect motion, with gravity providing a downward force and friction opposing motion between surfaces. Students conduct a penny lab investigating balanced and unbalanced forces related to gravity, inertia, and friction.
A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is an interaction between two objects, there is a force upon each of the objects. When the interaction ceases, the two objects no longer experience the force. Forces only exist as a result of an interaction.
A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is an interaction between two objects, there is a force upon each of the objects. When the interaction ceases, the two objects no longer experience the force. Forces only exist as a result of an interaction.
This document defines and explains the concept of forces. It states that a force is a push or pull exerted by one object on another. Forces have both magnitude and direction and are measured in Newtons. The net force on an object is the combination of all individual forces acting on it, which determines if and how the object's motion changes. Unbalanced net forces cause changes in motion, while balanced opposing forces of equal magnitude produce no net force and no change in motion.
"Zen and the Art of Industrial Construction"
Once upon a time in Gujarat, Plinth and Roofs was working on a massive industrial shed project. Everything was going smoothlyblueprints were flawless, steel structures were rising, and even the cement was behaving. That is, until...
Meet Ramesh, the Stressed Engineer.
Ramesh was a perfectionist. He measured bolts with the precision of a Swiss watchmaker and treated every steel beam like his own child. But as the deadline approached, Rameshs stress levels skyrocketed.
One day, he called Parul, the total management & marketing mastermind.
Ramesh (panicking): "Parul maam! The roof isn't aligning by 0.2 degrees! This is a disaster!"
Parul (calmly): "Ramesh, have you tried... meditating?"
、 Ramesh: "Meditating? Maam, I have 500 workers on-site, and you want me to sit cross-legged and hum Om?"
Parul: "Exactly. Mystic of Seven can help!"
Reluctantly, Ramesh agreed to a 5-minute guided meditation session.
He closed his eyes.
鏝 He breathed deeply.
He chanted "Om Namah Roofaya" (his custom version of a mantra).
When he opened his eyes, a miracle happened!
ッ His mind was clear.
The roof magically aligned (okay, maybe the team just adjusted it while he was meditating).
And for the first time, Ramesh smiled instead of calculating load capacities in his head.
Lesson Learned: Sometimes, even in industrial construction, a little bit of mindfulness goes a long way.
From that day on, Plinth and Roofs introduced tea breaks with meditation sessions, and productivity skyrocketed!
Moral of the story: "When in doubt, breathe it out!"
#PlinthAndRoofs #MysticOfSeven #ZenConstruction #MindfulEngineering
. マ留 裡留略龍侶: Foundation Analysis and Design: Single Piles
Welcome to this comprehensive presentation on "Foundation Analysis and Design," focusing on Single PilesStatic Capacity, Lateral Loads, and Pile/Pole Buckling. This presentation will explore the fundamental concepts, equations, and practical considerations for designing and analyzing pile foundations.
We'll examine different pile types, their characteristics, load transfer mechanisms, and the complex interactions between piles and surrounding soil. Throughout this presentation, we'll highlight key equations and methodologies for calculating pile capacities under various conditions.
Lecture -3 Cold water supply system.pptxrabiaatif2
油
The presentation on Cold Water Supply explored the fundamental principles of water distribution in buildings. It covered sources of cold water, including municipal supply, wells, and rainwater harvesting. Key components such as storage tanks, pipes, valves, and pumps were discussed for efficient water delivery. Various distribution systems, including direct and indirect supply methods, were analyzed for residential and commercial applications. The presentation emphasized water quality, pressure regulation, and contamination prevention. Common issues like pipe corrosion, leaks, and pressure drops were addressed along with maintenance strategies. Diagrams and case studies illustrated system layouts and best practices for optimal performance.
Gauges are a Pump's Best Friend - Troubleshooting and Operations - v.07Brian Gongol
油
No reputable doctor would try to conduct a basic physical exam without the help of a stethoscope. That's because the stethoscope is the best tool for gaining a basic "look" inside the key systems of the human body. Gauges perform a similar function for pumping systems, allowing technicians to "see" inside the pump without having to break anything open. Knowing what to do with the information gained takes practice and systemic thinking. This is a primer in how to do that.
This presentation provides an in-depth analysis of structural quality control in the KRP 401600 section of the Copper Processing Plant-3 (MOF-3) in Uzbekistan. As a Structural QA/QC Inspector, I have identified critical welding defects, alignment issues, bolting problems, and joint fit-up concerns.
Key topics covered:
Common Structural Defects Welding porosity, misalignment, bolting errors, and more.
Root Cause Analysis Understanding why these defects occur.
Corrective & Preventive Actions Effective solutions to improve quality.
Team Responsibilities Roles of supervisors, welders, fitters, and QC inspectors.
Inspection & Quality Control Enhancements Advanced techniques for defect detection.
Applicable Standards: GOST, KMK, SNK Ensuring compliance with international quality benchmarks.
This presentation is a must-watch for:
QA/QC Inspectors, Structural Engineers, Welding Inspectors, and Project Managers in the construction & oil & gas industries.
Professionals looking to improve quality control processes in large-scale industrial projects.
Download & share your thoughts! Let's discuss best practices for enhancing structural integrity in industrial projects.
Categories:
Engineering
Construction
Quality Control
Welding Inspection
Project Management
Tags:
#QAQC #StructuralInspection #WeldingDefects #BoltingIssues #ConstructionQuality #Engineering #GOSTStandards #WeldingInspection #QualityControl #ProjectManagement #MOF3 #CopperProcessing #StructuralEngineering #NDT #OilAndGas
Welcome to the March 2025 issue of WIPAC Monthly the magazine brought to you by the LinkedIn Group WIPAC Monthly.
In this month's edition, on top of the month's news from the water industry we cover subjects from the intelligent use of wastewater networks, the use of machine learning in water quality as well as how, we as an industry, need to develop the skills base in developing areas such as Machine Learning and Artificial Intelligence.
Enjoy the latest edition
1. What is a force?
How do forces combine?
How does friction affect motion?
2. What is a Force?
In science, a force is a push or a pull.
All forces have two properties:
Direction and Size
A newton (N) is the unit that describes
the size of a force.
3. The student is
pushing down on
the chair, but the
chair does not
move.
The floor is
balancing the force
by pushing on the
chair.
What is a Force?
4. More than one force often acts on an object.
When all the forces acting on an object are added
together, you determine the net force on the object.
An object with a net force more than 0 N on it will
change its state of motion.
How do Forces Combine?
5. Forces in the Same Direction
When forces are applied in the same
direction, they are added to determine
the size of the net force.
6. When two forces act in opposite directions, you
subtract the smaller force from the larger force to
determine the net force.
The net force will be in the same direction as the
larger force.
Forces in Different Directions
7. When the forces on an object produce a net
force of 0 N, the forces are balanced.
There is no change in the motion of the
object.
Balanced and Unbalanced Forces
8. When the net force on an object is not 0 N,
the forces on the object are unbalanced.
Unbalanced forces produce a change in
motion of an object.
Balanced and Unbalanced Forces
10. What Causes Friction?
Friction is the force that opposes the motion between two
surfaces that touch.
The surface of any object is rough.
Even an object that feels smooth is covered with tiny hills
and valleys.
The contact between the hills of valleys of two surfaces
causes them to stick, resulting in friction.
11. The amount of friction depends on:
Roughness of the surfaces
Force pushing the surfaces together
What Causes Friction?
12. Kinetic friction occurs when force is applied to an
object and the object moves.
Examples:
Sliding Friction: pushing an object across a surface
Rolling Friction: between wheels and a surface
Fluid Friction: opposes the motion of objects
traveling through a fluid (air or water)
Types of Friction
13. Static friction occurs when force applied
to an object does not cause the object to
move.
Types of Friction
14. To reduce the amount of friction, apply a lubricant
between two surfaces.
Motor oil, wax, and grease are examples.
Friction can also be reduced by rolling, rather than
pushing, an object.
Affecting Friction
15. Friction increases as surfaces are made
rougher.
Friction increases when the force between
two objects is increased.
Affecting Friction