Memasuki area WTP AAT wajib mendaftar di pos security, mengikuti safety induction, mengisi form ijin kerja, diiringi karyawan saat berkeliling, taati aturan APD minimum dan larangan merokok, serta berkumpul di titik kumpulan darurat.
16 WEEKLY HSE REPORT_PT LMM FEB 2022.pptxMichael482490
油
[Ringkasan]
Laporan HSE PT. Lantana Multi Mineral untuk periode 11-17 April 2022 menunjukkan statistik kecelakaan dan insiden nihil. Namun, terdapat beberapa near miss dan laporan bahaya yang masih terbuka, serta isu-isu utama seperti koordinasi kegiatan safety dan verifikasi rekomendasi untuk insiden DT 802.
Dokumen tersebut membahas pedoman keselamatan kerja kontraktor di PT. Arun NGL Co., mencakup tanggung jawab PT Arun dan kontraktor dalam menjamin keselamatan kerja, pelaksanaan ijin kerja, pelatihan K3, dan pengawasan pelaksanaan pekerjaan oleh kontraktor.
Dokumen tersebut membahas tentang unsafe act dan unsafe condition di Universitas Kristen Krida Wacana. Unsafe act merupakan tindakan yang melanggar aturan keselamatan seperti memasang steker bertumpuk, sedangkan unsafe condition adalah kondisi yang membahayakan seperti kabel listrik yang berantakan. Dokumen ini memberikan contoh kasus dan solusi untuk mencegah kecelakaan.
Dokumen tersebut berisi analisis pekerjaan proses spinning yang meliputi delapan tahapan utama yaitu mesin blowing, carding, pre-drawing, lap former, combing, drawing, simplex frame, dan ring spinning. Analisis mengidentifikasi bahaya-bahaya potensial pada setiap tahapan serta langkah-langkah pengendaliannya, seperti menggunakan alat pelindung diri yang sesuai dan bekerja sesuai standar operasional prosedur.
Uu Keselamatan Kerja No. 1 Tahun 1970 mengatur syarat-syarat keselamatan kerja yang harus dipenuhi untuk mencegah kecelakaan dan bahaya di tempat kerja, termasuk mewajibkan penggunaan alat pelindung diri dan taati petunjuk keselamatan. PT. Perdana Karya berkomitmen tinggi terhadap kesehatan dan keselamatan kerja karyawan dengan melaksanakan program K3 yang meliputi kepemimpinan, evaluasi, prosedur,
PT. Putra Cilegon Mandiri adalah perusahaan konstruksi dan supplier yang bergerak di bidang pembuatan, perbaikan, dan perawatan sistem produksi sejak 2004. Dokumen ini menjelaskan profil perusahaan, kebijakan keselamatan kerja, peraturan keselamatan, penggunaan alat pelindung diri, dan prosedur darurat di PT. Putra Cilegon Mandiri.
Dokumen tersebut membahas tentang izin kerja dan prosedur keselamatan yang harus dipatuhi untuk pekerjaan berisiko tinggi seperti pengelasan, pekerjaan di ruang terbatas, dan pekerjaan lainnya. Izin kerja diperlukan untuk mengontrol risiko dan memastikan keselamatan pekerja.
Undang-undang ini mengatur tentang keselamatan kerja di tempat-tempat kerja di Indonesia. Ia menetapkan definisi tempat kerja dan pihak-pihak terkait seperti pengusaha dan pengurus. Undang-undang ini juga menetapkan syarat-syarat keselamatan kerja dalam berbagai sektor dan kewajiban pihak-pihak terkait untuk mematuhi aturan keselamatan kerja guna mencegah kecelakaan dan menjamin kesehatan pekerja.
Dokumen tersebut membahas tentang faktor-faktor yang berhubungan dengan tindakan tidak aman (unsafe action) dan kondisi tidak aman (unsafe condition) yang dapat menyebabkan kecelakaan kerja. Beberapa faktor tersebut adalah kelelahan kerja, pengawasan, rekan kerja, masa kerja, dan pengetahuan tentang keselamatan dan kesehatan kerja. Dokumen tersebut juga memberikan saran untuk mengelola faktor-faktor tersebut agar d
Faktor-faktor yang mempengaruhi kecelakaan lalu lintas meliputi faktor manusia seperti pelanggaran rambu-rambu dan ketidaktahuan peraturan, faktor kendaraan seperti kurangnya perawatan, dan faktor lingkungan seperti kondisi jalan yang buruk. Untuk mencegah kecelakaan, penting bagi pengemudi dan penumpang mematuhi peraturan lalu lintas dan melakukan pemeriksaan kendaraan secara berk
This document outlines health and safety topics covered in an induction training. It discusses hazards associated with working at heights, proper use of ladders and scaffolding, fall protection, machine safety, chemical hazards, traffic safety, fire safety, and more. Safety signage and their meanings are explained. Penalties for safety infractions are listed to encourage compliance with safety rules and regulations. The goal is to educate workers on best practices to avoid accidents and injuries on the jobsite.
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
PT. Putra Cilegon Mandiri adalah perusahaan konstruksi dan supplier yang bergerak di bidang pembuatan, perbaikan, dan perawatan sistem produksi sejak 2004. Dokumen ini menjelaskan profil perusahaan, kebijakan keselamatan kerja, peraturan keselamatan, penggunaan alat pelindung diri, dan prosedur darurat di PT. Putra Cilegon Mandiri.
Dokumen tersebut membahas tentang izin kerja dan prosedur keselamatan yang harus dipatuhi untuk pekerjaan berisiko tinggi seperti pengelasan, pekerjaan di ruang terbatas, dan pekerjaan lainnya. Izin kerja diperlukan untuk mengontrol risiko dan memastikan keselamatan pekerja.
Undang-undang ini mengatur tentang keselamatan kerja di tempat-tempat kerja di Indonesia. Ia menetapkan definisi tempat kerja dan pihak-pihak terkait seperti pengusaha dan pengurus. Undang-undang ini juga menetapkan syarat-syarat keselamatan kerja dalam berbagai sektor dan kewajiban pihak-pihak terkait untuk mematuhi aturan keselamatan kerja guna mencegah kecelakaan dan menjamin kesehatan pekerja.
Dokumen tersebut membahas tentang faktor-faktor yang berhubungan dengan tindakan tidak aman (unsafe action) dan kondisi tidak aman (unsafe condition) yang dapat menyebabkan kecelakaan kerja. Beberapa faktor tersebut adalah kelelahan kerja, pengawasan, rekan kerja, masa kerja, dan pengetahuan tentang keselamatan dan kesehatan kerja. Dokumen tersebut juga memberikan saran untuk mengelola faktor-faktor tersebut agar d
Faktor-faktor yang mempengaruhi kecelakaan lalu lintas meliputi faktor manusia seperti pelanggaran rambu-rambu dan ketidaktahuan peraturan, faktor kendaraan seperti kurangnya perawatan, dan faktor lingkungan seperti kondisi jalan yang buruk. Untuk mencegah kecelakaan, penting bagi pengemudi dan penumpang mematuhi peraturan lalu lintas dan melakukan pemeriksaan kendaraan secara berk
This document outlines health and safety topics covered in an induction training. It discusses hazards associated with working at heights, proper use of ladders and scaffolding, fall protection, machine safety, chemical hazards, traffic safety, fire safety, and more. Safety signage and their meanings are explained. Penalties for safety infractions are listed to encourage compliance with safety rules and regulations. The goal is to educate workers on best practices to avoid accidents and injuries on the jobsite.
This PowerPoint presentation provides information about health and safety policies and responsibilities at Bridgwater College. It outlines the overall responsibility of the board of governors, principal, managers, staff, and health and safety manager. It details staff responsibilities and provides information on first aid procedures, fire safety, driving policies, and the college's commitment to safeguarding individuals and promoting health and well-being. The presentation is intended to inform college staff about relevant health and safety practices and policies.
This document outlines contractor and visitor induction instructions and responsibilities at two company sites. It provides important contact information for administration, health and safety, and maintenance departments. It states that contractors must submit required documentation and appoint a responsible person familiar with the work who will coordinate health and safety matters and ensure workers are informed of regulations. The responsible person must complete an induction covering local requirements and emergency procedures before work begins and keep copies of relevant legislation on site. Workers can be removed if they do not follow health and safety regulations.
Visitors SHE Induction Presentation 2016Chris Morris
油
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
This document provides an induction training summary for a construction project at the Dubai Design District Office Building. It includes:
1. Key personnel overseeing the project including the Project Manager, Technical Manager, and HSE Manager.
2. Health and safety policies and objectives to provide a safe working environment and achieve zero injuries or fatalities through compliance with regulations and building a strong safety culture.
3. Safety requirements and prohibited behaviors covering smoking, alcohol and drugs, horseplay, proper PPE use, traffic and pedestrian rules, and more. Failure to comply can result in removal from the site or legal penalties.
Bonnie Knott
*First Aid Officer
*First Aid Kit Officer
Dr. Hai Ngo
*First Aid Officer
*Snake Bite Kit Officer
*Field First Aid Kit Officer
Dr. Guijun Yan
*Radiation Safety Officer
Dr. Matthew Nelson
*Research Safety Officer
Dr. Rowena Long
*Kings Park Safety Rep
Dr. Robert Creasy
*Glasshouse Safety Rep
Dr. Patrick Finnegan
*Biological Safety Rep
This document provides a summary of safety information for visitors and contractors at Supagas sites. It outlines personal protective equipment requirements, hazardous areas to be aware of, emergency procedures including evacuation plans and assembly points, as well as information on dangerous goods, signage, and emergency personnel and equipment. Visitors and contractors are required to comply with all safety instructions and procedures provided in the induction and safety management plan.
The document discusses various environmental emergencies including heat-related illnesses, hypothermia and cold injuries, bites and stings, and water-related emergencies. It describes the predisposing factors, signs and symptoms, and treatment approaches for these conditions. The key aspects of patient assessment and care are to remove them from the dangerous environment, monitor for changes in mental status and vital signs, provide oxygenation and cooling or warming as indicated, and rapidly transport to definitive care.
This document discusses fall protection in the workplace. It states that falls are a leading cause of on-the-job deaths and injuries, killing over 11,000 people per year. It identifies various fall hazards like ladders, scaffolds, buckets and towers. It emphasizes inspecting equipment for faults, following safe work practices when working above 4 feet, and using fall arrest systems when other protections can't be used. Fall arrest systems have three components - a full body harness, connecting device, and anchor point that supports over 200 pounds. The document provides guidance on proper ladder use, types of fall protections like guard rails and safety nets, and inspecting personal fall arrest equipment.
The document discusses the Emergency Care Summary (ECS) system in Scotland. [1] The ECS extracts patient data like allergies, medications, and consent status from GP systems twice daily and makes it available to emergency departments and out-of-hours clinicians. [2] Over 5.4 million patient records are extracted, with very few opt-outs, and over 4.7 million accesses have occurred. [3] The system is being expanded to include palliative care summaries and a pilot with the Scottish Ambulance Service. Evaluations show the ECS improves patient safety and care by providing accurate medication and allergy information.
The document discusses the manufacturing process of boilers. It begins with defining a boiler and providing a brief history. It then outlines the key elements and basic types of boilers. The main part describes the 7 step manufacturing process including cutting metal sheets, rolling plates, welding, fitting components, testing, and finishing. Boiler manufacturing must comply with ASME standards for safety and quality control.
This document provides an overview of employer responsibilities under the Occupational Safety and Health Act of 1970. It discusses that employers must provide a workplace free of recognized hazards, examine conditions to ensure compliance with OSHA standards, and minimize or reduce hazards. Employers must also ensure employees have safe tools and equipment, provide necessary training and education, and report fatalities or catastrophes to OSHA. Supervisors play a key role in fulfilling these responsibilities as they work most directly with employees.
Emergency Medical Services (EMS) evolved from early battlefield medical care during wars to today's organized community response systems. EMS aims to provide immediate care to patients with sudden illness or injury. Over time, advances like motorized ambulances, helicopter evacuations, paramedic training programs, and emphasis on pre-hospital trauma care improved patient outcomes. The 1966 White Paper and Highway Safety Act prompted the development of standardized EMS education, systems, and oversight through agencies like the National Highway Safety Administration.
This document summarizes various environmental emergencies and injuries. It discusses electrical injuries including types of current, mechanisms of injury, cutaneous injuries, musculoskeletal injuries, and complications. It also covers high altitude illnesses like acute mountain sickness and pulmonary edema. Diving injuries like decompression sickness, air embolism, and barotrauma are explained. Radiation injuries, animal bites, snake envenomations, and spider bites are also summarized. For each topic, the document discusses signs, symptoms, diagnosis, and management.
The document provides an induction course for new personnel at an NGI training centre. It outlines the health, safety, and environmental regulations at the work site. The site is currently under construction for an onshore facilities project that will produce gas, condensate, and LPG. Key safety topics covered include proper personal protective equipment, permit requirements for hazardous work, emergency procedures, and prohibitions against things like smoking and speeding on site. Environmental regulations address waste disposal, spill prevention, and clean site practices.
PT Aetra Air Tangerang membutuhkan HSE Staff untuk memastikan prosedur keselamatan dan kesehatan kerja di area WTP-Intake. Pekerjaan ini meliputi pengawasan implementasi kebijakan HSE, pembuatan program keselamatan kerja, pelaporan insiden, dan melakukan promosi budaya keselamatan. Calon harus memiliki latar belakang pendidikan minimal D3 dan pengalaman satu tahun di bidang terkait.
HSE Training Housekeeping (23 des 2016)ibadil haqqi
油
Dokumen tersebut membahas pentingnya housekeeping (kebersihan dan ketertiban) di tempat kerja untuk meningkatkan produktivitas dan keselamatan. Dokumen tersebut memberikan rekomendasi perbaikan housekeeping di beberapa area di PT. Aetra Air Tangerang WTP Sepatan seperti intake, gudang, area taman, gedung kantor, area kimia, filter, dan genset.
Dokumen tersebut membahas tentang unit tanggap darurat dan perannya dalam menangani keadaan darurat di tempat kerja. Unit ini dibentuk untuk menanggulangi keadaan darurat sesuai dengan persyaratan OHSAS 18001:2007 dan terdiri dari beberapa tim yang meliputi tim HSE, maintenance, floor warden, P3K, transportasi, dan komunikasi. Masing-masing tim memiliki peran tertentu dalam menangani keadaan darurat dan memulihkan kondisi setel
Dokumen tersebut membahas tentang ruang terbatas dan prosedur kerja aman di dalamnya, termasuk definisi ruang terbatas, bahaya-bahaya yang mungkin terjadi, peralatan keselamatan yang diperlukan, serta tata cara memasuki dan bekerja di dalam ruang terbatas secara aman."
Dokumen tersebut membahas tentang pengelolaan limbah B3 dan tata cara penanganannya di PT. Aetra Air Tangerang WTP Sepatan. Ia menjelaskan definisi dan jenis limbah B3, serta cara pengolahan dan penyimpanan limbah B3 cair dan padat yang dihasilkan dari kegiatan laboratorium berdasarkan instruksi kerja yang berlaku. Dokumen tersebut juga menyinggung prosedur tanggap darurat untuk kebakaran atau tumpahan limbah B3.
Dokumen tersebut membahas tentang penyakit akibat kerja (PAK) dan penyakit yang timbul karena hubungan kerja (PAHK) yang secara inti maknanya sama, yaitu penyakit yang disebabkan oleh pekerjaan atau lingkungan kerja. Dokumen ini juga menjelaskan faktor-faktor penyebab PAK, contoh penyakit PAK, upaya pencegahan, dan kendala dalam pencegahan penyakit akibat kerja.
2. ATURAN UMUM
MEMASUKI WTP AAT
1. Wajib Register di Pos Security
2. Wajib mendapatkan Safety Induction pada saat pertama kali memasuki area WTP
AAT
3. Setiap akan melakukan pekerjaan di Aetra, diwajibkan mengisi form ijin kerja
(form ada di pos security)
4. Dilarang keliling site tanpa ditemani Karyawan PT. AAT/ security
5. Wajib mentaati semua aturan keselamatan PT. AAT :
APD Minimum (safety shoes)
Merokok
dll
6. Dilarang mengambil gambar/foto tanpa izin
7. Jika terjadi kondisi darurat wajib berkumpul di Muster Point (titik kumpul)
2Rev 1