SMR-110
0 likes368 views
SMR-110 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry to increase productivity without sacrificing quality. It utilizes new resin technology that allows for an extremely fast cure while maintaining ultra high gloss, and can be buffed in just 15 minutes. SMR-110 is applied in 2-5 coats over any urethane compatible basecoat using a 1.0-1.3 mm spray tip, and activated with SMR-150 at a 4:1 ratio and reduced up to 5% for application.
1 of 2
Download to read offline
Recommended
SMR-100
SMR-100speedokote
油
SMR-100 is a 2.1 VOC clearcoat formulated for mobile repair that offers fast cure and high gloss while maintaining quality. It utilizes new resin technology allowing extremely fast cure within 15 minutes for buffing. SMR-100 is applied in 2-5 coats at 5-15 psi with a 1.0-1.3mm tip and activated at a 4:1 ratio with SMR-150 activator and optional reduction of up to 5% with SMR-300 reducers. It can be recoated after 1 hour of air dry or after cool down when baked and requires light sanding or compounding after 15-20 minutes of air dry or after cool down from express drying.SMR-120
SMR-120speedokote
油
SMR-120 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry that offers superior UV and chemical resistance. It utilizes new resin technology that allows for an extremely fast cure while maintaining a high gloss, and can be buffed in 30-60 minutes. SMR-120 has a mix ratio of 4:1 with an activator and can be reduced up to 5% with Speedo reducers. It offers quick dry times, including being dust free in 2 minutes and able to sand or buff in 30-60 minutes.SMR-200
SMR-200speedokote
油
SMR-200 is a 2.1 VOC primer formulated for mobile repair. It dries and cures quickly without sacrificing adhesion. It sands easily with a smooth edge and good topcoat holdout. It is mixed at a 4:1 ratio with an activator and can be reduced up to 5% with Speedo reducers. It is suitable for fiberglass, SMC, OEM and cured finishes and is applied in 1-3 coats with a 1-3 minute flash between coats.SMR-130
SMR-130speedokote
油
SMR-130 is a 2K acrylic urethane clearcoat designed for mobile repair that offers fast cure times while maintaining high gloss. It can be buffed in 2-4 hours and has superior UV and chemical resistance. SMR-130 is applied in 2-3 coats at a ratio of 4:1 clear to activator, and can be reduced up to 10% with Speedo reducers. It adheres well to urethane basecoats and can be recoated after 2-4 hours for repairs.SMR-1000
SMR-1000speedokote
油
This document provides technical data on SMR-1000 Speedo Bedliner, a 2-component urethane coating used to line truck beds and other vehicle interiors. It comes in a kit containing six 24 oz containers of the coating and six 8 oz containers of activator. The coating requires surface preparation including cleaning and sanding before application via spray gun at 40-70 psi air pressure. It air dries within 1-2 hours and is ready for light duty after 24 hours and heavy duty use after 72 hours. Proper safety equipment and ventilation are recommended when applying.Norton Paint System - Esite
Norton Paint System - EsiteSaint-Gobain Abrasives AB
油
Norton Paint System - Nortonin ratkaisu sekoitukseen, maalaukseen ja maalin s辰ilytykseen tekee maalausty旦st辰 helpompaa ja nopeampaa. J辰rjestelm辰 mahdollistaa ruiskumaalauksen kaikissa asennoissa ilman vuotamisen vaaraa.nFluids nanoparticle drilling fluids additives brochure
nFluids nanoparticle drilling fluids additives brochureDr. Jeff Forsyth
油
This document discusses field pilots of nForcer, a next generation drilling fluid additive developed by nFluids Inc. It summarizes results from three field cases that demonstrated reductions in mud losses of 30%, oil on cuttings of 38%, and friction of 20% while increasing rate of penetration by 50%. The additive is based on stabilized nanoparticles that are able to penetrate and seal microfractures, reducing fluid losses and strengthening the wellbore. It is described as a patented, multi-functional product that enhances drilling fluid performance across various measures while being environmentally safe.Roll Grinding Super Finishing Dynabrade
Roll Grinding Super Finishing DynabradeMoch Rambe
油
Dynabrade is a privately owned company founded in 1969 that specializes in portable and stationary abrasive power tools. Dynabrade is known for inventing the Dynafile line of portable abrasive power tools and also produces tool post grinders, right angle grinders, and superfinishing machines. The company is headquartered in Clarence, NY and has operations in several countries worldwide.Peristaltic liquid dispenser FR800 for instant dry low viscosity liquid
Peristaltic liquid dispenser FR800 for instant dry low viscosity liquidEddie Lee
油
FR800 peristaltic Dispenser
Application for dispensing the liquid in lowness viscosity (Such as: Cyanoacrylate glue, Electrolyte, Printing ink, Solvents, Instant dry liquid etc.) . No compressed air required. Easily be integrated to automation line.Air precleaners by Sy klone (亳亠仄 于仂亰亟仂仂亳从亳)
Air precleaners by Sy klone (亳亠仄 于仂亰亟仂仂亳从亳)Trac-TOR LLC
油
The document compares the Sy-Klone single-stage and dual-stage precleaners. The single-stage precleaner is self-cleaning and maintenance-free, and expels mixed debris like mud, snow, leaves, and dust from engines in industries like construction, mining, forestry, and farming. The dual-stage precleaner provides higher efficiency and further extends engine life, removing both mixed and extreme debris, and is recommended for waste, mining, and forestry applications needing extra filtration. Both precleaners extend air filter life, increase uptime, improve fuel efficiency, and reduce operating costs.MT Large Bore High Range Pressure Switches Supplier in India
MT Large Bore High Range Pressure Switches Supplier in IndiaNK Instruments Pvt. Ltd.
油
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.Vibration isolators
Vibration isolatorsreachneerajs
油
Rubber pads should be avoided for vibration isolation because they can cause resonance between machines and foundations. Resonance leads to amplified vibrations instead of isolation, increased fatigue and breakdowns. Over time, rubber pads compress more which worsens the resonance issue. They also need frequent replacements that increase long-term costs compared to base isolators, which provide over 95% isolation and last lifelong with much lower dynamic loading and costs over 10 years.Tap-Cone-Mill
Tap-Cone-MillVM Sethi
油
Tapasya Engineering has been in the forefront of Granulation equipment for the pharmaceutical industry, since its inception in 1960. Tapasya engineering offering
High Shear Mixer Granulator,
Fluid Bed Dryer,
Plough Shear Mixer,
Underdriven CoMill,
Bin Wash Station,
Containment granulation system,
Lab scale granulation system,
Granulation Suite,
Oral Solid Dosage Process Equipments,
End Point Determination,
Blending systems in pharma industry,
OEL level in wet granulation,
Continuous coater,
Tablet press,
Plough share mixer and many more.High Vacuum Grease(Silicone) SV-G9 by Supervac Industries, India
High Vacuum Grease(Silicone) SV-G9 by Supervac Industries, IndiaAnshuman Punj
油
Used as a vacuum sealant and lubricant, High Vacuum Grease- SV-G9(Silicone), is manufactured by Supervac Industries, India. Due to its high quality and excellent properties, it has found wide spread appreciation in users all over the world.Renolin mr310 520 & 1030
Renolin mr310 520 & 1030畛 B叩 T湛ng
油
RENOLIN MR310, 520 and 1030 are multipurpose lubricating oils developed by FUCHS to work in a wide range of temperatures and provide excellent viscosity-temperature behavior. They are recommended for use in bearings, transmissions, and hydraulic systems operating in changing temperatures or sensitive to viscosity variations. The oils meet various industry specifications and provide benefits like high viscosity index, wide operating temperature range, excellent low-temperature properties, and good corrosion protection. They are suitable for use in applications exposed to extreme temperature fluctuations like ski lifts and firefighting equipment.Rtv silicones from kkd marine
Rtv silicones from kkd marineKKDMarine
油
This document provides information on various silicone-based gasket makers and sealants for automotive and industrial applications. It describes the key properties and temperature resistance ranges of products from Dynatex, Permatex, and Pro-Seal. These include resistance to oils, fuels, and temperatures from -75 to 700 degrees Fahrenheit. It also lists the Indian rupee prices of the different products which are available in tubes or kits and are suitable for sealing components like valve covers, oil pans, manifolds and more. The document recommends RTV silicone options from Arexons and Dow Corning for original equipment manufacturer applications. It concludes by providing the website and email contact for further information.Complete grinding equipment quartz powder grinding machine
Complete grinding equipment quartz powder grinding machineShanghai Clirik Mahcinery
油
The quartz powder grinding machine can grind materials into fine powders between 325 mesh and 2500 mesh (5-47 microns) with several advantages over other mills. It has no moving parts to wear out and produces powders in a very narrow particle size range at high efficiency while using 30% less energy compared to other mills. The machine can be adjusted to control the final particle size and comes in several models with throughput capacities ranging from 0.4 to 30 tons per hour. It has a long lifecycle and is safe, reliable, and environmentally friendly.Crescent industrial
Crescent industrialcrescent-industrial
油
Crescent Industrial is a dynamic and growing company supplying quality floor cleaning equipment to industry sectors including manufacturing, cleaning contractors, facilities managers, distribution and construction.
Fenner PLUS Roller Chain
Fenner PLUS Roller ChainSarah Evans
油
The document describes Fenner PLUS chain and sprockets for power transmission. Key features of the Fenner PLUS chain include solid rollers for wear resistance, shot peening to reduce fatigue failure, precision punching for accurate meshing, case hardened pins for abrasion resistance, pre-tensioning to reduce initial stretch, and wax lubrication to protect against premature wear. The chain is also available in a lubrication-free version with sintered bushings impregnated with oil. Fenner PLUS sprockets are induction hardened for increased life and have a surface treatment to reduce corrosion. The chain and sprockets are suitable for use in harsh environments like mining, quarrying, steel production, forestry, and wasteSMR-250
SMR-250speedokote
油
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.SMR-320
SMR-320speedokote
油
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.SMR-160
SMR-160speedokote
油
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Rmat factory profile xyl
Rmat factory profile xylTeddy Pai
油
Xinyilai Rubber Goods Co., Ltd. established an RMAT factory in 2012 and began R&D on RMAT (injection rubber combined with EVA and traditional rubber properties) in 2009. The document discusses RMAT's features like excellent friction, weather resistance and compression resistance. It also outlines the company's development of various RMAT formulations for applications like shoe materials, sports equipment and medical devices, describing properties tested for each grade.SMR-820
SMR-820speedokote
油
SMR-820 is a plastic cleaner designed to prepare flexible and hard plastic parts for adhesion of SMR-500 Speedo Stick adhesion promoter prior to refinishing. It is available in aerosol cans containing 12 cans per case. The cleaner thoroughly removes oils and contaminants from rubber and plastic surfaces. It can be used with a scuff pad on raw bumpers and with a lint-free cloth to clean other plastic parts before applying the adhesion promoter.Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com畛 B叩 T湛ng
油
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.8 40-cs-fg-ep-series
8 40-cs-fg-ep-seriesJavier Jes炭s Gonz叩lez Quina
油
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.SMR-230
SMR-230speedokote
油
Speedo Prime is a multi-use primer designed to prevent rust and seal out moisture on metal and plastic parts. It comes in aerosol cans in black, dark grey, medium grey, and light grey. Speedo Prime boasts excellent flexibility and adhesion, dries fast, has a high build quality, and is easy to sand before topcoating within 20 minutes. Application involves applying 2-3 coats with 1 minute between coats. It can be air dried within 10-15 minutes or express dried with a 5 minute bake at 120-140 degrees Fahrenheit.Carbothane 133 hb_pds
Carbothane 133 hb_pdszaid ayoub
油
This document provides information on Carbothane 133 HB, an aliphatic acrylic-polyester polyurethane coating. It has excellent resistance to corrosion, chemicals and abrasion. It can be applied by spray, brush or roller and provides very good weathering performance in a broad range of colors. The document outlines the product features, specifications, surface preparation requirements, application details, performance test results and curing times.SMR-15
SMR-15speedokote
油
SMR-15 is a two-part polyester putty for repairing minor bodywork imperfections. It has excellent leveling properties and is easy to sand. SMR-15 can be applied directly to bare steel, galvanized steel, aluminum, and cured paint surfaces after sanding with various grit papers depending on the substrate. The putty is mixed at a 100:2 ratio of putty to hardener by weight and applied in thin layers to allow surface imperfections to flow out during curing. SMR-15 becomes sandable after 20 minutes.ORIENTATION REPORT SYED MOHSAN RAZA (1)
ORIENTATION REPORT SYED MOHSAN RAZA (1)MOHSAN RAZA
油
The document provides an orientation report on the tube production process at Service Industries, a Pakistani company that manufactures tires and tubes. It discusses the company's history and market leadership. The aim of the report is to assess the tube section's organization, manufacturing process, materials used including natural and butyl rubber, nozzle types, production capacity, and the sequence of processes involved in tube production. Key steps covered include compound mixing, refining, feeding, extrusion, inspection and packaging. Production details like temperature settings and equipment sizes are provided.More Related Content
What's hot (11)
Peristaltic liquid dispenser FR800 for instant dry low viscosity liquid
Peristaltic liquid dispenser FR800 for instant dry low viscosity liquidEddie Lee
油
FR800 peristaltic Dispenser
Application for dispensing the liquid in lowness viscosity (Such as: Cyanoacrylate glue, Electrolyte, Printing ink, Solvents, Instant dry liquid etc.) . No compressed air required. Easily be integrated to automation line.Air precleaners by Sy klone (亳亠仄 于仂亰亟仂仂亳从亳)
Air precleaners by Sy klone (亳亠仄 于仂亰亟仂仂亳从亳)Trac-TOR LLC
油
The document compares the Sy-Klone single-stage and dual-stage precleaners. The single-stage precleaner is self-cleaning and maintenance-free, and expels mixed debris like mud, snow, leaves, and dust from engines in industries like construction, mining, forestry, and farming. The dual-stage precleaner provides higher efficiency and further extends engine life, removing both mixed and extreme debris, and is recommended for waste, mining, and forestry applications needing extra filtration. Both precleaners extend air filter life, increase uptime, improve fuel efficiency, and reduce operating costs.MT Large Bore High Range Pressure Switches Supplier in India
MT Large Bore High Range Pressure Switches Supplier in IndiaNK Instruments Pvt. Ltd.
油
We have various type of Pressure Switches based on sensing elements -
* Diaphragm operated Pressure Switches
* Piston operated Pressure Switches.
Based on type of enclosures, also various options in Pressure Switches are available -
* Dust proof Pressure Switches (IP40)
* Weatherproof Pressure Switches ( IP54 Pressure Switches, IP65 Pressure Switches, IP66 Pressure Switches)
* Exproof Pressure Switches ( Flameproof Pressure Switches to group IIA & IIB, Flameproof Pressure Switches to group IIC)
Based on type of type of Micro Switches also there are varieties -
* Fixed Differential type Pressure Switches
* Adjustable Differential type Pressure Switches.
* 2 SPDT type Pressure Switches
These type of Switches are available in Weatherproof and as well as Flameproof versions.
All these Pressure Switches are used interlocks & annunciation purpose.
We also have High proof Pressure Switches, which are used for applications where the process pressures are very high than the set pressure.
We have Air Relay Pressure Switches can be used in Flamable areas or, when only air supply is available and electrical supply is not present.Vibration isolators
Vibration isolatorsreachneerajs
油
Rubber pads should be avoided for vibration isolation because they can cause resonance between machines and foundations. Resonance leads to amplified vibrations instead of isolation, increased fatigue and breakdowns. Over time, rubber pads compress more which worsens the resonance issue. They also need frequent replacements that increase long-term costs compared to base isolators, which provide over 95% isolation and last lifelong with much lower dynamic loading and costs over 10 years.Tap-Cone-Mill
Tap-Cone-MillVM Sethi
油
Tapasya Engineering has been in the forefront of Granulation equipment for the pharmaceutical industry, since its inception in 1960. Tapasya engineering offering
High Shear Mixer Granulator,
Fluid Bed Dryer,
Plough Shear Mixer,
Underdriven CoMill,
Bin Wash Station,
Containment granulation system,
Lab scale granulation system,
Granulation Suite,
Oral Solid Dosage Process Equipments,
End Point Determination,
Blending systems in pharma industry,
OEL level in wet granulation,
Continuous coater,
Tablet press,
Plough share mixer and many more.High Vacuum Grease(Silicone) SV-G9 by Supervac Industries, India
High Vacuum Grease(Silicone) SV-G9 by Supervac Industries, IndiaAnshuman Punj
油
Used as a vacuum sealant and lubricant, High Vacuum Grease- SV-G9(Silicone), is manufactured by Supervac Industries, India. Due to its high quality and excellent properties, it has found wide spread appreciation in users all over the world.Renolin mr310 520 & 1030
Renolin mr310 520 & 1030畛 B叩 T湛ng
油
RENOLIN MR310, 520 and 1030 are multipurpose lubricating oils developed by FUCHS to work in a wide range of temperatures and provide excellent viscosity-temperature behavior. They are recommended for use in bearings, transmissions, and hydraulic systems operating in changing temperatures or sensitive to viscosity variations. The oils meet various industry specifications and provide benefits like high viscosity index, wide operating temperature range, excellent low-temperature properties, and good corrosion protection. They are suitable for use in applications exposed to extreme temperature fluctuations like ski lifts and firefighting equipment.Rtv silicones from kkd marine
Rtv silicones from kkd marineKKDMarine
油
This document provides information on various silicone-based gasket makers and sealants for automotive and industrial applications. It describes the key properties and temperature resistance ranges of products from Dynatex, Permatex, and Pro-Seal. These include resistance to oils, fuels, and temperatures from -75 to 700 degrees Fahrenheit. It also lists the Indian rupee prices of the different products which are available in tubes or kits and are suitable for sealing components like valve covers, oil pans, manifolds and more. The document recommends RTV silicone options from Arexons and Dow Corning for original equipment manufacturer applications. It concludes by providing the website and email contact for further information.Complete grinding equipment quartz powder grinding machine
Complete grinding equipment quartz powder grinding machineShanghai Clirik Mahcinery
油
The quartz powder grinding machine can grind materials into fine powders between 325 mesh and 2500 mesh (5-47 microns) with several advantages over other mills. It has no moving parts to wear out and produces powders in a very narrow particle size range at high efficiency while using 30% less energy compared to other mills. The machine can be adjusted to control the final particle size and comes in several models with throughput capacities ranging from 0.4 to 30 tons per hour. It has a long lifecycle and is safe, reliable, and environmentally friendly.Crescent industrial
Crescent industrialcrescent-industrial
油
Crescent Industrial is a dynamic and growing company supplying quality floor cleaning equipment to industry sectors including manufacturing, cleaning contractors, facilities managers, distribution and construction.
Fenner PLUS Roller Chain
Fenner PLUS Roller ChainSarah Evans
油
The document describes Fenner PLUS chain and sprockets for power transmission. Key features of the Fenner PLUS chain include solid rollers for wear resistance, shot peening to reduce fatigue failure, precision punching for accurate meshing, case hardened pins for abrasion resistance, pre-tensioning to reduce initial stretch, and wax lubrication to protect against premature wear. The chain is also available in a lubrication-free version with sintered bushings impregnated with oil. Fenner PLUS sprockets are induction hardened for increased life and have a surface treatment to reduce corrosion. The chain and sprockets are suitable for use in harsh environments like mining, quarrying, steel production, forestry, and wasteSimilar to SMR-110 (20)
SMR-250
SMR-250speedokote
油
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.SMR-320
SMR-320speedokote
油
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.SMR-160
SMR-160speedokote
油
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Rmat factory profile xyl
Rmat factory profile xylTeddy Pai
油
Xinyilai Rubber Goods Co., Ltd. established an RMAT factory in 2012 and began R&D on RMAT (injection rubber combined with EVA and traditional rubber properties) in 2009. The document discusses RMAT's features like excellent friction, weather resistance and compression resistance. It also outlines the company's development of various RMAT formulations for applications like shoe materials, sports equipment and medical devices, describing properties tested for each grade.SMR-820
SMR-820speedokote
油
SMR-820 is a plastic cleaner designed to prepare flexible and hard plastic parts for adhesion of SMR-500 Speedo Stick adhesion promoter prior to refinishing. It is available in aerosol cans containing 12 cans per case. The cleaner thoroughly removes oils and contaminants from rubber and plastic surfaces. It can be used with a scuff pad on raw bumpers and with a lint-free cloth to clean other plastic parts before applying the adhesion promoter.Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com畛 B叩 T湛ng
油
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.8 40-cs-fg-ep-series
8 40-cs-fg-ep-seriesJavier Jes炭s Gonz叩lez Quina
油
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.SMR-230
SMR-230speedokote
油
Speedo Prime is a multi-use primer designed to prevent rust and seal out moisture on metal and plastic parts. It comes in aerosol cans in black, dark grey, medium grey, and light grey. Speedo Prime boasts excellent flexibility and adhesion, dries fast, has a high build quality, and is easy to sand before topcoating within 20 minutes. Application involves applying 2-3 coats with 1 minute between coats. It can be air dried within 10-15 minutes or express dried with a 5 minute bake at 120-140 degrees Fahrenheit.Carbothane 133 hb_pds
Carbothane 133 hb_pdszaid ayoub
油
This document provides information on Carbothane 133 HB, an aliphatic acrylic-polyester polyurethane coating. It has excellent resistance to corrosion, chemicals and abrasion. It can be applied by spray, brush or roller and provides very good weathering performance in a broad range of colors. The document outlines the product features, specifications, surface preparation requirements, application details, performance test results and curing times.SMR-15
SMR-15speedokote
油
SMR-15 is a two-part polyester putty for repairing minor bodywork imperfections. It has excellent leveling properties and is easy to sand. SMR-15 can be applied directly to bare steel, galvanized steel, aluminum, and cured paint surfaces after sanding with various grit papers depending on the substrate. The putty is mixed at a 100:2 ratio of putty to hardener by weight and applied in thin layers to allow surface imperfections to flow out during curing. SMR-15 becomes sandable after 20 minutes.ORIENTATION REPORT SYED MOHSAN RAZA (1)
ORIENTATION REPORT SYED MOHSAN RAZA (1)MOHSAN RAZA
油
The document provides an orientation report on the tube production process at Service Industries, a Pakistani company that manufactures tires and tubes. It discusses the company's history and market leadership. The aim of the report is to assess the tube section's organization, manufacturing process, materials used including natural and butyl rubber, nozzle types, production capacity, and the sequence of processes involved in tube production. Key steps covered include compound mixing, refining, feeding, extrusion, inspection and packaging. Production details like temperature settings and equipment sizes are provided.SMR-400
SMR-400speedokote
油
Speedo Blend is a blend of solvents designed to be used as a panel blender for 2K clearcoat systems and single stage urethanes. It is compatible with major clearcoat, basecoat and single stage urethane systems. Speedo Blend comes in quart cans and aerosol cans, with six cans per case. It should be applied as a light mist to blend the edge until the desired look is achieved, and can be used straight or mixed with remaining clearcoat to further melt in the edge.Rossini hypalon sleeve for mono component
Rossini hypalon sleeve for mono componentRossiniUKLtd
油
Hypalon F Blue is an elastomer designed to coat lamination rollers and spread mono-component, solvent-free adhesives and hot melt coatings. It has a hardness range of 70-95, a maximum temperature resistance of 160属C, and is resistant to chemicals like gasoline, alcohol, water, and isocyanate. The elastomer can be coated onto steel rollers or Speedwell sleeves in thicknesses between 5-35mm and is available in diameters between 35-550mm for rollers or 80-450mm for sleeves.SMR-99
SMR-99speedokote
油
SMR-99 is a basecoat thickener designed for automotive touch-up that increases adhesion, durability, UV resistance, and gloss when mixed with unreduced solvent-borne basecoat in 20-50% proportions. SMR-999 is an excess remover that easily removes paint from around chips. The products are packaged in 9.5oz bottles of SMR-99 and aerosol cans of SMR-999, with 6 units per case. SMR-99 and SMR-999 are used to fill chips and clean excess paint respectively.Brochure Norton Pro Film abrasive discs
Brochure Norton Pro Film abrasive discsSaint-Gobain Abrasives EMEA
油
Norton Pro Film has been specially designed in line with the latest demand from body shops for a high spec finish with faster process time. With a No-Fil速 stearate treatment on top of high performance aluminium oxide abrasive, the film-backed discs are not only hard wearing, but also reduce clogging and dust build-up during the application.refiner-parasonymachinery.com
refiner-parasonymachinery.comParason Machinery
油
A grand service to Paper World, PARASON Machinery (India) Pvt. Ltd In twelve years 1500 TDRs commisioned A landmark in history Biggest producer of quality refiner plates Sleeves, impeller, Shaft Vital parts of pulp & Paper M/c with sound metallurgy PARASON TWIN DISC REFINER
Within a short span installed
more than 1500 units in India and abroad
PARASON CENTRI FLOW REFINER
Tri-disc Deflakers, TDR.Sap parts technology brochure
Sap parts technology brochuresapparts
油
SAP Parts is a rapidly growing company in the field of precision products serving the heavy , construction and agricultural industry since 2009.Esite Norton Pro Film Q275
Esite Norton Pro Film Q275Saint-Gobain Abrasives AB
油
Norton Pro Film -laikkojen k辰ytt旦ala on laaja ja niit辰 voi k辰ytt辰辰 esimerkiksi spakkelin, pintamaalin ja lakan hiontaan automaalaamoilla, pintakerroksen hiontaan laivanrakennusteollisuudessa, metallin viimeistelyyn, lentokoneiden huoltoon ja tuulivoimaloiden komposiittiyksityiskohtien hiontaan.Brochure Norton Pro Film
Brochure Norton Pro FilmSaint-Gobain Abrasives EMEA
油
Norton Pro Film has been specially designed in line with the latest demand from body shops for a high spec finish with faster process time. With a No-Fil速 stearate treatment on top of high performance aluminium oxide abrasive, the film-backed discs are not only hard wearing, but also reduce clogging and dust build-up during the application.Kluberlub be-41-1501 Mr T湛ng - 0987 988 407 | www.khodaumo.com
Kluberlub be-41-1501 Mr T湛ng - 0987 988 407 | www.khodaumo.com畛 B叩 T湛ng
油
Kl端berlub BE 41-1501 is a heavy-duty grease developed for large, low-speed rolling bearings subjected to high loads. It has a high base oil viscosity, excellent wear protection, and contains solid lubricants for use under starved lubrication conditions. Testing showed the grease meets requirements for very high load and shock applications in industries like material handling. It is suitable for lubricating the bearings in machines like roller presses and rotary crushers.More from speedokote (8)
Compounds, Pads and Cleaners
Compounds, Pads and Cleanersspeedokote
油
This document provides information on various foam pads and compounds for automotive detailing. It lists 7 foam pads in various sizes and colors for removing scratches, swirls, oxidation and enhancing gloss. It also lists two compounds - an instant detailer for cleaning, polishing and protecting, and a one-step finishing compound for removing sand scratches on fresh paint while leaving a glossy finish. The document is from Speedokote LLC and provides product codes and contact information.SMR-700
SMR-700speedokote
油
SMR-700 is a UV cure coating used to restore the factory look to plastic headlights. It cures with direct sunlight or UV lights and increases light output, improving safety. The coating has withstood 3 years of Florida weather without deterioration. The document provides instructions on cleaning, sanding, applying, and curing the coating to restore headlights.SMR-810
SMR-810speedokote
油
SMR-810 is a general purpose degreaser aerosol that removes silicone, grease, wax, tar, road film and other contaminants. It can be used as a pre-cleaner before grinding and sanding surfaces. SMR-810 comes in aerosol cans containing 12 cans per case. To use, wash the area with soap and water, dry it, apply SMR-810 liberally, let it penetrate contaminants, then wipe the surface clean with a dry cloth.SMR-800
SMR-800speedokote
油
SMR-800 is an aerosol gun cleaner that is designed to remove urethane, polyester, and waterborne paints. It comes in aerosol cans containing 12 cans per case. To use it, spray it directly into the paint inlet of the gun while pumping the trigger to flush out ports and inlets. It can also be applied to exterior surfaces to dissolve and wipe away paint residue.SMR-600
SMR-600speedokote
油
SMR-600 Speedo Basecoat Activator is an additive that can be used with other manufacturers' basecoats to increase the durability and longevity of the paint system. It comes in pint bottles in cases of 12 and should be added at a rate of 1-2 ounces per sprayable quart of basecoat according to the paint manufacturer's recommendations. The activator mixes with the basecoat and is applied following the paint manufacturer's application instructions.SMR-500
SMR-500speedokote
油
SMR-500 Speedo Stick is an adhesion promoter designed for use in the automotive refinish industry to promote strong adhesion of paint on plastic parts like bumper covers and interior panels. It contains etching resins that coat and seal plastic to allow adhesion of all types of paint systems without prior sanding, though sanding further enhances adhesion. Speedo Stick is applied with an air gun or cloth and allows painting within 20-30 minutes as adhesion fully develops over 12-24 hours of curing.SMR-830
SMR-830speedokote
油
SMR-830 is a water-based pre-cleaner that removes road grime, silicone, grease and wax from surfaces. It leaves no residue when used properly and has a low VOC formula making it compliant with regulations. The pre-cleaner can be sprayed directly onto cool surfaces or applied with a cloth. It must remain wet on the surface to penetrate and dissolve contaminants before being wiped off with a clean, dry cloth. Proper use of the pre-cleaner is recommended before repair work to prevent contaminants from being forced into surfaces.SMR-995 Plastic Rejuvenator
SMR-995 Plastic Rejuvenatorspeedokote
油
SMR-995 Plastic Rejuvenator is 1K clear coating developed to restore color and gloss to
automotive trim, moldings, impact strips, tires and interior pieces. This durable coating will
also protect parts against fading. SMR-995 Plastic Rejuvenator contains UV resistors to
protect trim from further fading. Easy to apply, dries fast to a tack free surface.SMR-110
- 1. SMR-110 SPEEDO CLEAR (National Rule) TECHNICAL DATA DESCRIPTION: SMR-110, 4.2 V.O.C. Speedo Mobile Repair clearcoat has been specifically formulated for the mobile repair industry. SMR-110 has been designed to increase productivity without sacrificing quality. SMR-110 is a 2K acrylic urethane clear with superior UV and chemical resistance. TECHNICAL PRODUCT INFORMATION: SMR-110, Speedo Mobile Repair 4.2 V.O.C. clearcoat utilizes new resin technology which allows for an extremely fast cure while maintaining an ultra high gloss. SMR-110 is easy to apply and can be BUFFED in 15 MINUTES, yielding a DOI equal to an overnight dry clear. PACKAGING: Part Number Description Temp. Size Qty. Case SMR-110 SPEEDO CLEAR 4.2 VOC Gallon 4 SMR-110-Q SPEEDO CLEAR 4.2 VOC Quart 6 SMR-150-Q SPEEDO ACTIVATOR Quart 12 SMR-150-8 SPEEDO ACTIVATOR 8 oz. 12 SMR-300-Q SPEEDO THIN SPEED REDUCER FAST 55属F - 65属F Quart 12 SMR-310-Q SPEEDO THIN SPEED REDUCER MEDIUM 65属F - 80属F Quart 12 SMR-320-Q SPEEDO THIN SPEED REDUCER SLOW 80属F - up Quart 12 NOTE: Using any other reducer will DECREASE product performance. MIX RATIO: SMR-110 is activated with SMR-150 (Speedo Activator) at a 4:1 ratio and can be reduced up to 5% with SMR-300 / SMR-310 / SMR-320 Speedo Reducers. 4 Parts SPEEDO CLEAR 1 Part SPEEDO ACTIVATOR 5% Optional SPEEDO THIN SPEED REDUCER BASECOAT: Can be applied over any urethane compatible basecoat. Please follow the basecoat manufactures recommended clearcoat dry times. To increase Basecoat adhesion to substrate and/or clearcoat, add 5-10% SMR-600 Speedo Base Activator to mixed basecoat prior to application. SpeedoKote LLC 5701 N. Webster St. Dayton, Ohio 45414 (937) 280-0091 Fax (937) 280-0092 www.speedokote.com e-mail: sales@speedokote.com
- 2. GUN SETUP Fluid Tip psi Mini Spray Gun 1.0 1.3mm 5-15 psi Conventional Gravity Feed 1.3mm 25-30 psi APPLICATION Using a 1.0-1.3 mm spray tip, apply 2-5 coats continuously until desired leveling is achieved. No flash required between coats. DRY TIMES Air Dry Flash Between Coats 0 minutes Dust Free 1 minutes Air Dry 10-15 minutes Express Dry Flash Between Coats 0 minutes Flash Before Force Dry 0 minutes Bake Time 5 minutes @120属F to 140属F BLENDING Using SMR-400-Q / SMR-410-A Speedo Blend apply a light mist to blend edge after each coat until desired look is achieved. RECOATABILITY/REPAIR SMR-110 Speedo Clear may be recoated for repair. After cool down when baked. Air dry repair 1 hour. SANDING/COMPOUNDING/POLISHING Optimum Times Express Dry After cool down Air Dry 15-20 minutes Sanding Express Dry After cool down Light de-nib: 2000 grit wet Air Dry 15-20 minutes Light de-nib: 2000 grit wet Compounding Express Dry After cool down Foam compound pad (recommended) Air Dry 15-20 minutes Foam compound pad (recommended) Polishing Express Dry After cool down Foam polishing pad (recommended) Air Dry 15-20 minutes Foam polishing pad (recommended) SpeedoKote LLC 5701 N. Webster St. Dayton, Ohio 45414 (937) 280-0091 Fax (937) 280-0092 www.speedokote.com e-mail: sales@speedokote.com