SMR-820
0 likes195 views
SMR-820 is a plastic cleaner designed to prepare flexible and hard plastic parts for adhesion of SMR-500 Speedo Stick adhesion promoter prior to refinishing. It is available in aerosol cans containing 12 cans per case. The cleaner thoroughly removes oils and contaminants from rubber and plastic surfaces. It can be used with a scuff pad on raw bumpers and with a lint-free cloth to clean other plastic parts before applying the adhesion promoter.
1 of 1
Download to read offline
Recommended
SMR-810
SMR-810speedokote
?
SMR-810 is a general purpose degreaser aerosol that removes silicone, grease, wax, tar, road film and other contaminants. It can be used as a pre-cleaner before grinding and sanding surfaces. SMR-810 comes in aerosol cans containing 12 cans per case. To use, wash the area with soap and water, dry it, apply SMR-810 liberally, let it penetrate contaminants, then wipe the surface clean with a dry cloth.Technical data sheet bitumen emulsion ms 65%
Technical data sheet bitumen emulsion ms 65%Benzene International Pte Ltd
?
This technical data sheet provides information about an emulsion bitumen medium setting product that is 65% residue by evaporation. The document includes details on the product's properties, applications, packaging, health and safety guidelines, and cleaning instructions. It describes how asphalt becomes emulsified and suspended in water, lists test standards and specifications for properties like viscosity and penetration, and explains uses for surface dressing, tack coats, and slurry sealing. Safety precautions are outlined for flammability and skin/eye/inhalation exposure.SMR-800
SMR-800speedokote
?
SMR-800 is an aerosol gun cleaner that is designed to remove urethane, polyester, and waterborne paints. It comes in aerosol cans containing 12 cans per case. To use it, spray it directly into the paint inlet of the gun while pumping the trigger to flush out ports and inlets. It can also be applied to exterior surfaces to dissolve and wipe away paint residue.Technical data sheet bitumen emulsion ms 60%
Technical data sheet bitumen emulsion ms 60%Benzene International Pte Ltd
?
This technical data sheet provides information on Emulsion Bitumen Medium Setting 60% - SM-K, MS-1K. It is an asphalt emulsion where asphalt is milled into microscopic particles and dispersed in water with an emulsifier. The emulsion has a residue of 60% and is used primarily for surface dressing, tack coats, slurry sealing, and cold mixing in road construction and maintenance applications. Proper handling and safety precautions are required when using this product due to its flammable nature.Technical data sheet bitumen emulsion rs 50%
Technical data sheet bitumen emulsion rs 50%Benzene International Pte Ltd
?
This document provides information on Emulsion Bitumen Rapid Setting 50%-RS-1K, including:
1) It is an asphalt emulsion where asphalt is dispersed in water with an emulsifier, allowing the asphalt droplets to remain suspended.
2) It has properties suitable for applications like surface dressing, tack coats, and slurry sealing.
3) Safety information is provided, stating it is flammable and skin and eye contact can cause irritation.Product Data Sheet-NXK SiC
Product Data Sheet-NXK SiC?? ??
?
This document provides information about Ningxia XingKai Silicon Carbide Co., Ltd, including their address, contact information, available product sizes and specifications, and chemical analysis of their silicon carbide grit and powder products. Product sizes range from 7-80# grit and 80F-325F powder. Chemical analysis shows the silicon carbide and iron oxide content meets or exceeds the specified minimum and maximum percentages.Amsoil chain lube
Amsoil chain lubePrincessShabnam
?
AMSOIL Chain Lube is an aerosol lubricant that provides outstanding protection against wear and corrosion for motorcycle and bicycle chains. It penetrates deep into chains and leaves a protective coating that does not fling off or attract dirt. Chain Lube is suitable for all types of chains and helps extend chain life through its protective qualities and ease of application.Brochure GlassFlakes Co.,Ltd
Brochure GlassFlakes Co.,LtdAndyLi1111
?
The leading manufacture of glass flakes, original draft the National standard and offer formula of glassflake epoxy CoatingSMR-500
SMR-500speedokote
?
SMR-500 Speedo Stick is an adhesion promoter designed for use in the automotive refinish industry to promote strong adhesion of paint on plastic parts like bumper covers and interior panels. It contains etching resins that coat and seal plastic to allow adhesion of all types of paint systems without prior sanding, though sanding further enhances adhesion. Speedo Stick is applied with an air gun or cloth and allows painting within 20-30 minutes as adhesion fully develops over 12-24 hours of curing.SMR-995 Plastic Rejuvenator
SMR-995 Plastic Rejuvenatorspeedokote
?
SMR-995 Plastic Rejuvenator is 1K clear coating developed to restore color and gloss to
automotive trim, moldings, impact strips, tires and interior pieces. This durable coating will
also protect parts against fading. SMR-995 Plastic Rejuvenator contains UV resistors to
protect trim from further fading. Easy to apply, dries fast to a tack free surface.SMR-200
SMR-200speedokote
?
SMR-200 is a 2.1 VOC primer formulated for mobile repair. It dries and cures quickly without sacrificing adhesion. It sands easily with a smooth edge and good topcoat holdout. It is mixed at a 4:1 ratio with an activator and can be reduced up to 5% with Speedo reducers. It is suitable for fiberglass, SMC, OEM and cured finishes and is applied in 1-3 coats with a 1-3 minute flash between coats.SMR-99
SMR-99speedokote
?
SMR-99 is a basecoat thickener designed for automotive touch-up that increases adhesion, durability, UV resistance, and gloss when mixed with unreduced solvent-borne basecoat in 20-50% proportions. SMR-999 is an excess remover that easily removes paint from around chips. The products are packaged in 9.5oz bottles of SMR-99 and aerosol cans of SMR-999, with 6 units per case. SMR-99 and SMR-999 are used to fill chips and clean excess paint respectively.SMR-15
SMR-15speedokote
?
SMR-15 is a two-part polyester putty for repairing minor bodywork imperfections. It has excellent leveling properties and is easy to sand. SMR-15 can be applied directly to bare steel, galvanized steel, aluminum, and cured paint surfaces after sanding with various grit papers depending on the substrate. The putty is mixed at a 100:2 ratio of putty to hardener by weight and applied in thin layers to allow surface imperfections to flow out during curing. SMR-15 becomes sandable after 20 minutes.SMR-110
SMR-110speedokote
?
SMR-110 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry to increase productivity without sacrificing quality. It utilizes new resin technology that allows for an extremely fast cure while maintaining ultra high gloss, and can be buffed in just 15 minutes. SMR-110 is applied in 2-5 coats over any urethane compatible basecoat using a 1.0-1.3 mm spray tip, and activated with SMR-150 at a 4:1 ratio and reduced up to 5% for application.Rubber molding business plan | Aatmnirbhar Sena
Rubber molding business plan | Aatmnirbhar SenaAatmnirbhar Sena
?
Generically, the term rubber in use comprises Indian rubber(Also known as natural rubber), synthetic rubber, or a combination of both the rubbers.
Natural rubbers and Synthetic rubbers are elastomers. Most of the time, synthetic rubbers get tagged as artificial rubber.
It makes around two-third of rubber production all across the globe. SMR-120
SMR-120speedokote
?
SMR-120 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry that offers superior UV and chemical resistance. It utilizes new resin technology that allows for an extremely fast cure while maintaining a high gloss, and can be buffed in 30-60 minutes. SMR-120 has a mix ratio of 4:1 with an activator and can be reduced up to 5% with Speedo reducers. It offers quick dry times, including being dust free in 2 minutes and able to sand or buff in 30-60 minutes.SMR-1000
SMR-1000speedokote
?
This document provides technical data on SMR-1000 Speedo Bedliner, a 2-component urethane coating used to line truck beds and other vehicle interiors. It comes in a kit containing six 24 oz containers of the coating and six 8 oz containers of activator. The coating requires surface preparation including cleaning and sanding before application via spray gun at 40-70 psi air pressure. It air dries within 1-2 hours and is ready for light duty after 24 hours and heavy duty use after 72 hours. Proper safety equipment and ventilation are recommended when applying.SMR-250
SMR-250speedokote
?
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.Moulds For Tyre Industries,Rubber Machine Mould Manufacturer
Moulds For Tyre Industries,Rubber Machine Mould Manufacturerjeykaveda
?
Welcome to S.R. Engineering,We are Manufacturers & Exports of Conveyor Manufacturer,Material Handling Equipment ,Re-conditioning & Refurbishment,Rubber Processing Machine,Mould For TyreSMR-100
SMR-100speedokote
?
SMR-100 is a 2.1 VOC clearcoat formulated for mobile repair that offers fast cure and high gloss while maintaining quality. It utilizes new resin technology allowing extremely fast cure within 15 minutes for buffing. SMR-100 is applied in 2-5 coats at 5-15 psi with a 1.0-1.3mm tip and activated at a 4:1 ratio with SMR-150 activator and optional reduction of up to 5% with SMR-300 reducers. It can be recoated after 1 hour of air dry or after cool down when baked and requires light sanding or compounding after 15-20 minutes of air dry or after cool down from express drying.SMR-160
SMR-160speedokote
?
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Polylub gly-151-501-801 Mr T¨´ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T¨´ng - 0987 988 407 | www.khodaumo.com?? B¨¢ T¨´ng
?
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.Silver Fox Faceplate/General Labels - Self-Adhesive & Non-Adhesive
Silver Fox Faceplate/General Labels - Self-Adhesive & Non-AdhesiveThorne & Derrick International
?
This multipage document provides product information for self-adhesive polyester labels. It details the printing method, materials, testing methods, and specifications. The labels are designed for use in a wide range of applications including equipment labeling and are available in various standard sizes and colors. Technical data on the labels is provided, including thickness, sheet size, colors available, and compliance with RoHS standards. The document also provides instructions on storage, ordering information with product codes and label dimensions, and a disclaimer.Thomson bsa accessoriestechnicalinfo_catalog
Thomson bsa accessoriestechnicalinfo_catalogElectromate
?
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to provide misalignment capability and withstand hostile environments. Grease options include specialized gels for different temperature ranges and cleanliness requirements. Wiper kits help spread lubricant and prevent contamination, with brush or snap-in styles available. Mounting flanges are designed for easy attachment to bronze nuts or supenuts.Thomson BSA Accessories
Thomson BSA AccessoriesElectromate
?
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to allow for misalignment. Grease options include specialized gels for different temperature ranges and environments. Wiper kits help spread lubricant and prevent contamination. Mounting flanges are designed for easy installation on bronze nuts and supenuts.Global Fine Chemicals Corporate Overview 2014
Global Fine Chemicals Corporate Overview 2014Winston Ng (Îâ»ùâÙ)
?
KCT Co., Ltd. (Korea), PT. Global Lubriutama (Indonesia) and Global Fine Chemicals (Shanghai) Co., Ltd. (China) develop and manufacture quality performance release agent, marking paint, anti-finger print varnish, lubricants, and grease for tire, steel, rubber hose, polyurethane, and die casting manufacturing.Birkosit Sealing Compound contains boiled linseed oils
Birkosit Sealing Compound contains boiled linseed oilsProject Sales Corp
?
Birkosit is a sealing compound containing boiled linseed oil that has been used for sealing turbine casing joints for over 50 years. It provides effective sealing up to 250 bar pressure and 900¡ãC temperatures. Turbine manufacturers worldwide prefer Birkosit due to its 10-year guaranteed service life, easy application, and ability to fill gaps up to 2mm. It has an unlimited storage life when stored correctly.SMR-320
SMR-320speedokote
?
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.Compounds, Pads and Cleaners
Compounds, Pads and Cleanersspeedokote
?
This document provides information on various foam pads and compounds for automotive detailing. It lists 7 foam pads in various sizes and colors for removing scratches, swirls, oxidation and enhancing gloss. It also lists two compounds - an instant detailer for cleaning, polishing and protecting, and a one-step finishing compound for removing sand scratches on fresh paint while leaving a glossy finish. The document is from Speedokote LLC and provides product codes and contact information.SMR-700
SMR-700speedokote
?
SMR-700 is a UV cure coating used to restore the factory look to plastic headlights. It cures with direct sunlight or UV lights and increases light output, improving safety. The coating has withstood 3 years of Florida weather without deterioration. The document provides instructions on cleaning, sanding, applying, and curing the coating to restore headlights.More Related Content
Similar to SMR-820 (20)
SMR-500
SMR-500speedokote
?
SMR-500 Speedo Stick is an adhesion promoter designed for use in the automotive refinish industry to promote strong adhesion of paint on plastic parts like bumper covers and interior panels. It contains etching resins that coat and seal plastic to allow adhesion of all types of paint systems without prior sanding, though sanding further enhances adhesion. Speedo Stick is applied with an air gun or cloth and allows painting within 20-30 minutes as adhesion fully develops over 12-24 hours of curing.SMR-995 Plastic Rejuvenator
SMR-995 Plastic Rejuvenatorspeedokote
?
SMR-995 Plastic Rejuvenator is 1K clear coating developed to restore color and gloss to
automotive trim, moldings, impact strips, tires and interior pieces. This durable coating will
also protect parts against fading. SMR-995 Plastic Rejuvenator contains UV resistors to
protect trim from further fading. Easy to apply, dries fast to a tack free surface.SMR-200
SMR-200speedokote
?
SMR-200 is a 2.1 VOC primer formulated for mobile repair. It dries and cures quickly without sacrificing adhesion. It sands easily with a smooth edge and good topcoat holdout. It is mixed at a 4:1 ratio with an activator and can be reduced up to 5% with Speedo reducers. It is suitable for fiberglass, SMC, OEM and cured finishes and is applied in 1-3 coats with a 1-3 minute flash between coats.SMR-99
SMR-99speedokote
?
SMR-99 is a basecoat thickener designed for automotive touch-up that increases adhesion, durability, UV resistance, and gloss when mixed with unreduced solvent-borne basecoat in 20-50% proportions. SMR-999 is an excess remover that easily removes paint from around chips. The products are packaged in 9.5oz bottles of SMR-99 and aerosol cans of SMR-999, with 6 units per case. SMR-99 and SMR-999 are used to fill chips and clean excess paint respectively.SMR-15
SMR-15speedokote
?
SMR-15 is a two-part polyester putty for repairing minor bodywork imperfections. It has excellent leveling properties and is easy to sand. SMR-15 can be applied directly to bare steel, galvanized steel, aluminum, and cured paint surfaces after sanding with various grit papers depending on the substrate. The putty is mixed at a 100:2 ratio of putty to hardener by weight and applied in thin layers to allow surface imperfections to flow out during curing. SMR-15 becomes sandable after 20 minutes.SMR-110
SMR-110speedokote
?
SMR-110 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry to increase productivity without sacrificing quality. It utilizes new resin technology that allows for an extremely fast cure while maintaining ultra high gloss, and can be buffed in just 15 minutes. SMR-110 is applied in 2-5 coats over any urethane compatible basecoat using a 1.0-1.3 mm spray tip, and activated with SMR-150 at a 4:1 ratio and reduced up to 5% for application.Rubber molding business plan | Aatmnirbhar Sena
Rubber molding business plan | Aatmnirbhar SenaAatmnirbhar Sena
?
Generically, the term rubber in use comprises Indian rubber(Also known as natural rubber), synthetic rubber, or a combination of both the rubbers.
Natural rubbers and Synthetic rubbers are elastomers. Most of the time, synthetic rubbers get tagged as artificial rubber.
It makes around two-third of rubber production all across the globe. SMR-120
SMR-120speedokote
?
SMR-120 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry that offers superior UV and chemical resistance. It utilizes new resin technology that allows for an extremely fast cure while maintaining a high gloss, and can be buffed in 30-60 minutes. SMR-120 has a mix ratio of 4:1 with an activator and can be reduced up to 5% with Speedo reducers. It offers quick dry times, including being dust free in 2 minutes and able to sand or buff in 30-60 minutes.SMR-1000
SMR-1000speedokote
?
This document provides technical data on SMR-1000 Speedo Bedliner, a 2-component urethane coating used to line truck beds and other vehicle interiors. It comes in a kit containing six 24 oz containers of the coating and six 8 oz containers of activator. The coating requires surface preparation including cleaning and sanding before application via spray gun at 40-70 psi air pressure. It air dries within 1-2 hours and is ready for light duty after 24 hours and heavy duty use after 72 hours. Proper safety equipment and ventilation are recommended when applying.SMR-250
SMR-250speedokote
?
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.Moulds For Tyre Industries,Rubber Machine Mould Manufacturer
Moulds For Tyre Industries,Rubber Machine Mould Manufacturerjeykaveda
?
Welcome to S.R. Engineering,We are Manufacturers & Exports of Conveyor Manufacturer,Material Handling Equipment ,Re-conditioning & Refurbishment,Rubber Processing Machine,Mould For TyreSMR-100
SMR-100speedokote
?
SMR-100 is a 2.1 VOC clearcoat formulated for mobile repair that offers fast cure and high gloss while maintaining quality. It utilizes new resin technology allowing extremely fast cure within 15 minutes for buffing. SMR-100 is applied in 2-5 coats at 5-15 psi with a 1.0-1.3mm tip and activated at a 4:1 ratio with SMR-150 activator and optional reduction of up to 5% with SMR-300 reducers. It can be recoated after 1 hour of air dry or after cool down when baked and requires light sanding or compounding after 15-20 minutes of air dry or after cool down from express drying.SMR-160
SMR-160speedokote
?
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Polylub gly-151-501-801 Mr T¨´ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T¨´ng - 0987 988 407 | www.khodaumo.com?? B¨¢ T¨´ng
?
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.Silver Fox Faceplate/General Labels - Self-Adhesive & Non-Adhesive
Silver Fox Faceplate/General Labels - Self-Adhesive & Non-AdhesiveThorne & Derrick International
?
This multipage document provides product information for self-adhesive polyester labels. It details the printing method, materials, testing methods, and specifications. The labels are designed for use in a wide range of applications including equipment labeling and are available in various standard sizes and colors. Technical data on the labels is provided, including thickness, sheet size, colors available, and compliance with RoHS standards. The document also provides instructions on storage, ordering information with product codes and label dimensions, and a disclaimer.Thomson bsa accessoriestechnicalinfo_catalog
Thomson bsa accessoriestechnicalinfo_catalogElectromate
?
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to provide misalignment capability and withstand hostile environments. Grease options include specialized gels for different temperature ranges and cleanliness requirements. Wiper kits help spread lubricant and prevent contamination, with brush or snap-in styles available. Mounting flanges are designed for easy attachment to bronze nuts or supenuts.Thomson BSA Accessories
Thomson BSA AccessoriesElectromate
?
The document describes various accessories for ball screw assemblies, including flexible couplings, three-piece couplers, grease options, wiper kits, and standard mounting flanges. It provides details on part numbers, specifications, and applications for each type of accessory. Flexible couplings come in various sizes and materials to allow for misalignment. Grease options include specialized gels for different temperature ranges and environments. Wiper kits help spread lubricant and prevent contamination. Mounting flanges are designed for easy installation on bronze nuts and supenuts.Global Fine Chemicals Corporate Overview 2014
Global Fine Chemicals Corporate Overview 2014Winston Ng (Îâ»ùâÙ)
?
KCT Co., Ltd. (Korea), PT. Global Lubriutama (Indonesia) and Global Fine Chemicals (Shanghai) Co., Ltd. (China) develop and manufacture quality performance release agent, marking paint, anti-finger print varnish, lubricants, and grease for tire, steel, rubber hose, polyurethane, and die casting manufacturing.Birkosit Sealing Compound contains boiled linseed oils
Birkosit Sealing Compound contains boiled linseed oilsProject Sales Corp
?
Birkosit is a sealing compound containing boiled linseed oil that has been used for sealing turbine casing joints for over 50 years. It provides effective sealing up to 250 bar pressure and 900¡ãC temperatures. Turbine manufacturers worldwide prefer Birkosit due to its 10-year guaranteed service life, easy application, and ability to fill gaps up to 2mm. It has an unlimited storage life when stored correctly.SMR-320
SMR-320speedokote
?
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.More from speedokote (7)
Compounds, Pads and Cleaners
Compounds, Pads and Cleanersspeedokote
?
This document provides information on various foam pads and compounds for automotive detailing. It lists 7 foam pads in various sizes and colors for removing scratches, swirls, oxidation and enhancing gloss. It also lists two compounds - an instant detailer for cleaning, polishing and protecting, and a one-step finishing compound for removing sand scratches on fresh paint while leaving a glossy finish. The document is from Speedokote LLC and provides product codes and contact information.SMR-700
SMR-700speedokote
?
SMR-700 is a UV cure coating used to restore the factory look to plastic headlights. It cures with direct sunlight or UV lights and increases light output, improving safety. The coating has withstood 3 years of Florida weather without deterioration. The document provides instructions on cleaning, sanding, applying, and curing the coating to restore headlights.SMR-400
SMR-400speedokote
?
Speedo Blend is a blend of solvents designed to be used as a panel blender for 2K clearcoat systems and single stage urethanes. It is compatible with major clearcoat, basecoat and single stage urethane systems. Speedo Blend comes in quart cans and aerosol cans, with six cans per case. It should be applied as a light mist to blend the edge until the desired look is achieved, and can be used straight or mixed with remaining clearcoat to further melt in the edge.SMR-600
SMR-600speedokote
?
SMR-600 Speedo Basecoat Activator is an additive that can be used with other manufacturers' basecoats to increase the durability and longevity of the paint system. It comes in pint bottles in cases of 12 and should be added at a rate of 1-2 ounces per sprayable quart of basecoat according to the paint manufacturer's recommendations. The activator mixes with the basecoat and is applied following the paint manufacturer's application instructions.SMR-230
SMR-230speedokote
?
Speedo Prime is a multi-use primer designed to prevent rust and seal out moisture on metal and plastic parts. It comes in aerosol cans in black, dark grey, medium grey, and light grey. Speedo Prime boasts excellent flexibility and adhesion, dries fast, has a high build quality, and is easy to sand before topcoating within 20 minutes. Application involves applying 2-3 coats with 1 minute between coats. It can be air dried within 10-15 minutes or express dried with a 5 minute bake at 120-140 degrees Fahrenheit.SMR-130
SMR-130speedokote
?
SMR-130 is a 2K acrylic urethane clearcoat designed for mobile repair that offers fast cure times while maintaining high gloss. It can be buffed in 2-4 hours and has superior UV and chemical resistance. SMR-130 is applied in 2-3 coats at a ratio of 4:1 clear to activator, and can be reduced up to 10% with Speedo reducers. It adheres well to urethane basecoats and can be recoated after 2-4 hours for repairs.SMR-830
SMR-830speedokote
?
SMR-830 is a water-based pre-cleaner that removes road grime, silicone, grease and wax from surfaces. It leaves no residue when used properly and has a low VOC formula making it compliant with regulations. The pre-cleaner can be sprayed directly onto cool surfaces or applied with a cloth. It must remain wet on the surface to penetrate and dissolve contaminants before being wiped off with a clean, dry cloth. Proper use of the pre-cleaner is recommended before repair work to prevent contaminants from being forced into surfaces.SMR-820
- 1. SMR-820 SPEEDO PLASTICS CLEANER Aerosol TECHNICAL DATA DESCRIPTION: SMR-820 Speedo Plastics Cleaner is designed specifically for raw flexible parts prior to SMR-500 Speedo Stick Adhesion Promoter. PACKAGING: Part Number Description Size Qty. Case SMR-820 SPEEDO Plastics Cleaner Aerosol 12 INSTRUCTIONS: SMR-820 Speedo Plastics Cleaner is a special cleaner designed specifically for raw flexible parts prior to SMR-500 Speedo Stick. Also works very well on hard parts including E-Coat panels prior to priming. Thoroughly removes oils, contaminants from all types of rubber and plastics. Should always be followed by SMR-500 Speedo Stick before refinish. APPLICATION: 1. SMR-820 Speedo Plastics Cleaner can be used on most all plastic parts to prepare for paint or primer. 2. Thoroughly clean all parts first with soap and water. 3. On raw bumpers use SMR-820 Speedo Plastics Cleaner with scuff pad to thoroughly clean and abraid. 4. Thoroughly re-clean part using SMR-820 Speedo Plastics Cleaner and lint free cloth or towel. 5. For proper adhesion apply SMR-500 Speedo Stick adhesion promoter. 6. SMR-820 Speedo Plastics Cleaner can also be used to remove some overspray from glass and cured paint surfaces. SpeedoKote LLC ¡ö 5701 N. Webster St. ¡ö Dayton, Ohio 45414 ¡ö (937) 280-0091 ¡ö Fax (937) 280-0092 www.speedokote.com ¡ö e-mail: sales@speedokote.com