SMR-130
0 likes487 views
SMR-130 is a 2K acrylic urethane clearcoat designed for mobile repair that offers fast cure times while maintaining high gloss. It can be buffed in 2-4 hours and has superior UV and chemical resistance. SMR-130 is applied in 2-3 coats at a ratio of 4:1 clear to activator, and can be reduced up to 10% with Speedo reducers. It adheres well to urethane basecoats and can be recoated after 2-4 hours for repairs.
1 of 2
Download to read offline
Recommended
SMR-120
SMR-120speedokote
油
SMR-120 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry that offers superior UV and chemical resistance. It utilizes new resin technology that allows for an extremely fast cure while maintaining a high gloss, and can be buffed in 30-60 minutes. SMR-120 has a mix ratio of 4:1 with an activator and can be reduced up to 5% with Speedo reducers. It offers quick dry times, including being dust free in 2 minutes and able to sand or buff in 30-60 minutes.SMR-110
SMR-110speedokote
油
SMR-110 is a 4.2 VOC acrylic urethane clearcoat formulated for the mobile repair industry to increase productivity without sacrificing quality. It utilizes new resin technology that allows for an extremely fast cure while maintaining ultra high gloss, and can be buffed in just 15 minutes. SMR-110 is applied in 2-5 coats over any urethane compatible basecoat using a 1.0-1.3 mm spray tip, and activated with SMR-150 at a 4:1 ratio and reduced up to 5% for application.SMR-100
SMR-100speedokote
油
SMR-100 is a 2.1 VOC clearcoat formulated for mobile repair that offers fast cure and high gloss while maintaining quality. It utilizes new resin technology allowing extremely fast cure within 15 minutes for buffing. SMR-100 is applied in 2-5 coats at 5-15 psi with a 1.0-1.3mm tip and activated at a 4:1 ratio with SMR-150 activator and optional reduction of up to 5% with SMR-300 reducers. It can be recoated after 1 hour of air dry or after cool down when baked and requires light sanding or compounding after 15-20 minutes of air dry or after cool down from express drying.SMR-200
SMR-200speedokote
油
SMR-200 is a 2.1 VOC primer formulated for mobile repair. It dries and cures quickly without sacrificing adhesion. It sands easily with a smooth edge and good topcoat holdout. It is mixed at a 4:1 ratio with an activator and can be reduced up to 5% with Speedo reducers. It is suitable for fiberglass, SMC, OEM and cured finishes and is applied in 1-3 coats with a 1-3 minute flash between coats.Roll Grinding Super Finishing Dynabrade
Roll Grinding Super Finishing DynabradeMoch Rambe
油
Dynabrade is a privately owned company founded in 1969 that specializes in portable and stationary abrasive power tools. Dynabrade is known for inventing the Dynafile line of portable abrasive power tools and also produces tool post grinders, right angle grinders, and superfinishing machines. The company is headquartered in Clarence, NY and has operations in several countries worldwide.Tap-Cone-Mill
Tap-Cone-MillVM Sethi
油
Tapasya Engineering has been in the forefront of Granulation equipment for the pharmaceutical industry, since its inception in 1960. Tapasya engineering offering
High Shear Mixer Granulator,
Fluid Bed Dryer,
Plough Shear Mixer,
Underdriven CoMill,
Bin Wash Station,
Containment granulation system,
Lab scale granulation system,
Granulation Suite,
Oral Solid Dosage Process Equipments,
End Point Determination,
Blending systems in pharma industry,
OEL level in wet granulation,
Continuous coater,
Tablet press,
Plough share mixer and many more.Crescent industrial
Crescent industrialcrescent-industrial
油
Crescent Industrial is a dynamic and growing company supplying quality floor cleaning equipment to industry sectors including manufacturing, cleaning contractors, facilities managers, distribution and construction.
Skydome - COFRAJ REFOLOSIBIL PENTRU TAVANE CASETATE
Skydome - COFRAJ REFOLOSIBIL PENTRU TAVANE CASETATEREDA SRL
油
The Skydome system is a lightweight plastic formwork system for constructing waffle slab concrete structures. It has several advantages including being environmentally friendly as it is made of recyclable plastic, easy to handle due to its light weight, reusable for multiple pours, and cost effective by reducing concrete and forming costs compared to solid slabs. The system consists of plastic dome, beam, and cube components in various sizes that are assembled to create the waffle slab structure. It allows for large slab spans, requires no supporting structure during assembly, and dismantles easily without form oil.SMR-1000
SMR-1000speedokote
油
This document provides technical data on SMR-1000 Speedo Bedliner, a 2-component urethane coating used to line truck beds and other vehicle interiors. It comes in a kit containing six 24 oz containers of the coating and six 8 oz containers of activator. The coating requires surface preparation including cleaning and sanding before application via spray gun at 40-70 psi air pressure. It air dries within 1-2 hours and is ready for light duty after 24 hours and heavy duty use after 72 hours. Proper safety equipment and ventilation are recommended when applying.SMR-250
SMR-250speedokote
油
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.Rmat factory profile xyl
Rmat factory profile xylTeddy Pai
油
Xinyilai Rubber Goods Co., Ltd. established an RMAT factory in 2012 and began R&D on RMAT (injection rubber combined with EVA and traditional rubber properties) in 2009. The document discusses RMAT's features like excellent friction, weather resistance and compression resistance. It also outlines the company's development of various RMAT formulations for applications like shoe materials, sports equipment and medical devices, describing properties tested for each grade.SMR-700
SMR-700speedokote
油
SMR-700 is a UV cure coating used to restore the factory look to plastic headlights. It cures with direct sunlight or UV lights and increases light output, improving safety. The coating has withstood 3 years of Florida weather without deterioration. The document provides instructions on cleaning, sanding, applying, and curing the coating to restore headlights.SMR-160
SMR-160speedokote
油
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Carbothane 133 hb_pds
Carbothane 133 hb_pdszaid ayoub
油
This document provides information on Carbothane 133 HB, an aliphatic acrylic-polyester polyurethane coating. It has excellent resistance to corrosion, chemicals and abrasion. It can be applied by spray, brush or roller and provides very good weathering performance in a broad range of colors. The document outlines the product features, specifications, surface preparation requirements, application details, performance test results and curing times.SMR-320
SMR-320speedokote
油
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.PMS FY 22-23.pptx
PMS FY 22-23.pptxNoushadAli50
油
The document provides inspection details for a green color double net chop saw across 4 trials. Key parameters inspected include thickness, weight, fiber distribution, bore size, straightness of rotation, out of balance, and vibration. Results are reported for each trial as well as min, max, and mean values. Overall, the saw performed well with minimal variation across trials and parameters meeting or close to specifications.Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com畛 B叩 T湛ng
油
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.refiner-parasonymachinery.com
refiner-parasonymachinery.comParason Machinery
油
A grand service to Paper World, PARASON Machinery (India) Pvt. Ltd In twelve years 1500 TDRs commisioned A landmark in history Biggest producer of quality refiner plates Sleeves, impeller, Shaft Vital parts of pulp & Paper M/c with sound metallurgy PARASON TWIN DISC REFINER
Within a short span installed
more than 1500 units in India and abroad
PARASON CENTRI FLOW REFINER
Tri-disc Deflakers, TDR.Meta Fin Solutions, Bengaluru, Automotive Care Products
Meta Fin Solutions, Bengaluru, Automotive Care ProductsIndiaMART InterMESH Limited
油
Exporting and supplying a range of automotive care products like engine carbon cleaner, lubricant spray, lubricating oil additives. These are used for various maintenance services in automotive industry such as Heavy Duty Release Lubricant, 20 ST Paste, Anti Seize Paste, Chuck Paste, Engine Clear Coat, Engine Oil Additives, Automotive Rubbing Compound..Skf masti
Skf mastiSidik Ajah
油
SKF is a leading manufacturer of lubrication products and systems for rotating machinery. Their catalog provides an overview of their extensive product offerings, which include lubricants, manual lubrication tools, automatic lubricators, centralized lubrication systems, and accessories. SKF has over 100 years of experience in bearings and lubrication science. They offer a wide range of greases and oils that are carefully formulated for different applications based on extensive research.8 40-cs-fg-ep-series
8 40-cs-fg-ep-seriesJavier Jes炭s Gonz叩lez Quina
油
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.3M Scotchcast Resin, Epoxy Resin 251
3M Scotchcast Resin, Epoxy Resin 251Thorne & Derrick International
油
Scotchcast Electrical Resin 251 is a two-part, oven-curing epoxy resin designed for applications requiring strength and excellent properties at elevated temperatures up to 155属C. It has a 1:1 mix ratio by weight or volume, medium viscosity, and cures within 2-3 hours at 120属C. The resin has high mechanical strength, good electrical insulation properties, and withstands thermal shock and moisture exposure well according to test data provided. Proper mixing, degassing, casting or impregnation, and curing procedures are outlined to achieve optimal performance.Atox 22.50 coal mill optimization
Atox 22.50 coal mill optimizationNITIN ASNANI
油
The main objective of this presentation is that how to optimize the mill in pet coke grinding and what modification is required when changing from normal coal to pet coke.Composite resin systems - Selector guide
Composite resin systems - Selector guideHuntsman Advanced Materials Europe
油
Huntsman Advanced Materials produces a range of thermosetting composite resin systems for various manufacturing industries. They offer technical support and expertise to help customers optimize processes and develop customized solutions. Their product range includes resin formulations for wet layup, resin transfer molding, infusion, filament winding, and other composites manufacturing methods. Huntsman works with customers to select the best resin system for their needs, improve quality and performance, and accelerate time to market.Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfa-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfa-englishhtrindia
油
This document provides information about HTR's silicone coated wire wound resistors. It describes the resistors' physical configuration including dimensions and resistance ranges for power ratings from 1W to 10W. It also outlines the resistors' electrical and environmental characteristics as well as typical applications and ordering information.HFA - WIRE WOUND RESISTORS SILICONE COATED TYPE
HFA - WIRE WOUND RESISTORS SILICONE COATED TYPEhtrindia
油
This document provides information about HTR's silicone coated wire wound resistors. It describes the resistors' physical configuration including dimensions and resistance ranges for power ratings from 1W to 10W. It also outlines the resistors' electrical and environmental characteristics as well as typical applications and ordering information.Alfa laval-tank-cleaning-device-selection-guide
Alfa laval-tank-cleaning-device-selection-guideChevronelle
油
This document provides guidance on selecting the appropriate tank cleaning device. It discusses the differences between rotary spray cleaners and rotary jet cleaners, with jet cleaners providing higher mechanical force using less water. The document describes various models of rotary spray cleaners and jet cleaners from Alfa Laval for different sized tanks, including their recommended pressures, temperatures, and certifications. It concludes by introducing Central States Industrial as a distributor of sanitary processing equipment.Swepco 704 synthetic_aw_hydraulic_oil_sales_brochure_j04389
Swepco 704 synthetic_aw_hydraulic_oil_sales_brochure_j04389robertoalfaro49
油
SWEPCO 704 Synthetic Anti-Wear Hydraulic Oil delivers industry-leading performance for demanding stationary or mobile hydraulic applications. It uses proprietary Syntheon synthetic base stock blends and LUBIUM II oxidation and corrosion resistant chemistry to provide long lubricant life, system cleanliness, superior wear protection, improved efficiencies and reduced energy consumption. SWEPCO 704 can significantly extend equipment life, reduce waste oil disposal and costs, and lower electrical utility costs through improved hydraulic efficiency.SMR-99
SMR-99speedokote
油
SMR-99 is a basecoat thickener designed for automotive touch-up that increases adhesion, durability, UV resistance, and gloss when mixed with unreduced solvent-borne basecoat in 20-50% proportions. SMR-999 is an excess remover that easily removes paint from around chips. The products are packaged in 9.5oz bottles of SMR-99 and aerosol cans of SMR-999, with 6 units per case. SMR-99 and SMR-999 are used to fill chips and clean excess paint respectively.Compounds, Pads and Cleaners
Compounds, Pads and Cleanersspeedokote
油
This document provides information on various foam pads and compounds for automotive detailing. It lists 7 foam pads in various sizes and colors for removing scratches, swirls, oxidation and enhancing gloss. It also lists two compounds - an instant detailer for cleaning, polishing and protecting, and a one-step finishing compound for removing sand scratches on fresh paint while leaving a glossy finish. The document is from Speedokote LLC and provides product codes and contact information.More Related Content
Similar to SMR-130 (20)
SMR-1000
SMR-1000speedokote
油
This document provides technical data on SMR-1000 Speedo Bedliner, a 2-component urethane coating used to line truck beds and other vehicle interiors. It comes in a kit containing six 24 oz containers of the coating and six 8 oz containers of activator. The coating requires surface preparation including cleaning and sanding before application via spray gun at 40-70 psi air pressure. It air dries within 1-2 hours and is ready for light duty after 24 hours and heavy duty use after 72 hours. Proper safety equipment and ventilation are recommended when applying.SMR-250
SMR-250speedokote
油
SMR-250 is a one-component primer sealer that provides a smooth, uniform surface for topcoats on previously coated metal surfaces. It has excellent adhesion and color holdout properties. The sealer is ready to spray directly from the can without mixing and can be resealed for future use. It is available in gallon and quart sizes and can be applied with a spray gun using a 1.0-1.3mm fluid tip at 5-15 psi. The sealer dries to allow topcoating within 15 minutes.Rmat factory profile xyl
Rmat factory profile xylTeddy Pai
油
Xinyilai Rubber Goods Co., Ltd. established an RMAT factory in 2012 and began R&D on RMAT (injection rubber combined with EVA and traditional rubber properties) in 2009. The document discusses RMAT's features like excellent friction, weather resistance and compression resistance. It also outlines the company's development of various RMAT formulations for applications like shoe materials, sports equipment and medical devices, describing properties tested for each grade.SMR-700
SMR-700speedokote
油
SMR-700 is a UV cure coating used to restore the factory look to plastic headlights. It cures with direct sunlight or UV lights and increases light output, improving safety. The coating has withstood 3 years of Florida weather without deterioration. The document provides instructions on cleaning, sanding, applying, and curing the coating to restore headlights.SMR-160
SMR-160speedokote
油
SMR-160 is a flexible activator that increases the impact resistance and flexibility of urethane coatings like primers and clearcoats, preventing cracking and improving adhesion. It comes in 8 oz bottles packaged in cases of 6. When mixed with primers at a 3:1 or 2:1 ratio and clearcoats at a 2:1 ratio, it extends sanding times and provides extra flexibility to the coatings.Carbothane 133 hb_pds
Carbothane 133 hb_pdszaid ayoub
油
This document provides information on Carbothane 133 HB, an aliphatic acrylic-polyester polyurethane coating. It has excellent resistance to corrosion, chemicals and abrasion. It can be applied by spray, brush or roller and provides very good weathering performance in a broad range of colors. The document outlines the product features, specifications, surface preparation requirements, application details, performance test results and curing times.SMR-320
SMR-320speedokote
油
Speedo Thin Reducers are formulated for the refinish mobile repair industry to improve flow and leveling of SpeedoKote clearcoats and primers without reducing film integrity. The reducers come in three varieties - SMR-300 Fast, SMR-310 Medium, and SMR-320 Slow - that are packaged in quarts and have a VOC of 2.1 lb/gal. When mixing with clearcoat, add up to 5% reducer, and when mixing with primer, add up to 10% reducer.PMS FY 22-23.pptx
PMS FY 22-23.pptxNoushadAli50
油
The document provides inspection details for a green color double net chop saw across 4 trials. Key parameters inspected include thickness, weight, fiber distribution, bore size, straightness of rotation, out of balance, and vibration. Results are reported for each trial as well as min, max, and mean values. Overall, the saw performed well with minimal variation across trials and parameters meeting or close to specifications.Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr T湛ng - 0987 988 407 | www.khodaumo.com畛 B叩 T湛ng
油
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.refiner-parasonymachinery.com
refiner-parasonymachinery.comParason Machinery
油
A grand service to Paper World, PARASON Machinery (India) Pvt. Ltd In twelve years 1500 TDRs commisioned A landmark in history Biggest producer of quality refiner plates Sleeves, impeller, Shaft Vital parts of pulp & Paper M/c with sound metallurgy PARASON TWIN DISC REFINER
Within a short span installed
more than 1500 units in India and abroad
PARASON CENTRI FLOW REFINER
Tri-disc Deflakers, TDR.Meta Fin Solutions, Bengaluru, Automotive Care Products
Meta Fin Solutions, Bengaluru, Automotive Care ProductsIndiaMART InterMESH Limited
油
Exporting and supplying a range of automotive care products like engine carbon cleaner, lubricant spray, lubricating oil additives. These are used for various maintenance services in automotive industry such as Heavy Duty Release Lubricant, 20 ST Paste, Anti Seize Paste, Chuck Paste, Engine Clear Coat, Engine Oil Additives, Automotive Rubbing Compound..Skf masti
Skf mastiSidik Ajah
油
SKF is a leading manufacturer of lubrication products and systems for rotating machinery. Their catalog provides an overview of their extensive product offerings, which include lubricants, manual lubrication tools, automatic lubricators, centralized lubrication systems, and accessories. SKF has over 100 years of experience in bearings and lubrication science. They offer a wide range of greases and oils that are carefully formulated for different applications based on extensive research.8 40-cs-fg-ep-series
8 40-cs-fg-ep-seriesJavier Jes炭s Gonz叩lez Quina
油
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.3M Scotchcast Resin, Epoxy Resin 251
3M Scotchcast Resin, Epoxy Resin 251Thorne & Derrick International
油
Scotchcast Electrical Resin 251 is a two-part, oven-curing epoxy resin designed for applications requiring strength and excellent properties at elevated temperatures up to 155属C. It has a 1:1 mix ratio by weight or volume, medium viscosity, and cures within 2-3 hours at 120属C. The resin has high mechanical strength, good electrical insulation properties, and withstands thermal shock and moisture exposure well according to test data provided. Proper mixing, degassing, casting or impregnation, and curing procedures are outlined to achieve optimal performance.Atox 22.50 coal mill optimization
Atox 22.50 coal mill optimizationNITIN ASNANI
油
The main objective of this presentation is that how to optimize the mill in pet coke grinding and what modification is required when changing from normal coal to pet coke.Composite resin systems - Selector guide
Composite resin systems - Selector guideHuntsman Advanced Materials Europe
油
Huntsman Advanced Materials produces a range of thermosetting composite resin systems for various manufacturing industries. They offer technical support and expertise to help customers optimize processes and develop customized solutions. Their product range includes resin formulations for wet layup, resin transfer molding, infusion, filament winding, and other composites manufacturing methods. Huntsman works with customers to select the best resin system for their needs, improve quality and performance, and accelerate time to market.Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfa-english
Htr india-products-wire-wound-resistors-silicone-coated-resistors-hfa-englishhtrindia
油
This document provides information about HTR's silicone coated wire wound resistors. It describes the resistors' physical configuration including dimensions and resistance ranges for power ratings from 1W to 10W. It also outlines the resistors' electrical and environmental characteristics as well as typical applications and ordering information.HFA - WIRE WOUND RESISTORS SILICONE COATED TYPE
HFA - WIRE WOUND RESISTORS SILICONE COATED TYPEhtrindia
油
This document provides information about HTR's silicone coated wire wound resistors. It describes the resistors' physical configuration including dimensions and resistance ranges for power ratings from 1W to 10W. It also outlines the resistors' electrical and environmental characteristics as well as typical applications and ordering information.Alfa laval-tank-cleaning-device-selection-guide
Alfa laval-tank-cleaning-device-selection-guideChevronelle
油
This document provides guidance on selecting the appropriate tank cleaning device. It discusses the differences between rotary spray cleaners and rotary jet cleaners, with jet cleaners providing higher mechanical force using less water. The document describes various models of rotary spray cleaners and jet cleaners from Alfa Laval for different sized tanks, including their recommended pressures, temperatures, and certifications. It concludes by introducing Central States Industrial as a distributor of sanitary processing equipment.Swepco 704 synthetic_aw_hydraulic_oil_sales_brochure_j04389
Swepco 704 synthetic_aw_hydraulic_oil_sales_brochure_j04389robertoalfaro49
油
SWEPCO 704 Synthetic Anti-Wear Hydraulic Oil delivers industry-leading performance for demanding stationary or mobile hydraulic applications. It uses proprietary Syntheon synthetic base stock blends and LUBIUM II oxidation and corrosion resistant chemistry to provide long lubricant life, system cleanliness, superior wear protection, improved efficiencies and reduced energy consumption. SWEPCO 704 can significantly extend equipment life, reduce waste oil disposal and costs, and lower electrical utility costs through improved hydraulic efficiency.More from speedokote (12)
SMR-99
SMR-99speedokote
油
SMR-99 is a basecoat thickener designed for automotive touch-up that increases adhesion, durability, UV resistance, and gloss when mixed with unreduced solvent-borne basecoat in 20-50% proportions. SMR-999 is an excess remover that easily removes paint from around chips. The products are packaged in 9.5oz bottles of SMR-99 and aerosol cans of SMR-999, with 6 units per case. SMR-99 and SMR-999 are used to fill chips and clean excess paint respectively.Compounds, Pads and Cleaners
Compounds, Pads and Cleanersspeedokote
油
This document provides information on various foam pads and compounds for automotive detailing. It lists 7 foam pads in various sizes and colors for removing scratches, swirls, oxidation and enhancing gloss. It also lists two compounds - an instant detailer for cleaning, polishing and protecting, and a one-step finishing compound for removing sand scratches on fresh paint while leaving a glossy finish. The document is from Speedokote LLC and provides product codes and contact information.SMR-400
SMR-400speedokote
油
Speedo Blend is a blend of solvents designed to be used as a panel blender for 2K clearcoat systems and single stage urethanes. It is compatible with major clearcoat, basecoat and single stage urethane systems. Speedo Blend comes in quart cans and aerosol cans, with six cans per case. It should be applied as a light mist to blend the edge until the desired look is achieved, and can be used straight or mixed with remaining clearcoat to further melt in the edge.SMR-15
SMR-15speedokote
油
SMR-15 is a two-part polyester putty for repairing minor bodywork imperfections. It has excellent leveling properties and is easy to sand. SMR-15 can be applied directly to bare steel, galvanized steel, aluminum, and cured paint surfaces after sanding with various grit papers depending on the substrate. The putty is mixed at a 100:2 ratio of putty to hardener by weight and applied in thin layers to allow surface imperfections to flow out during curing. SMR-15 becomes sandable after 20 minutes.SMR-820
SMR-820speedokote
油
SMR-820 is a plastic cleaner designed to prepare flexible and hard plastic parts for adhesion of SMR-500 Speedo Stick adhesion promoter prior to refinishing. It is available in aerosol cans containing 12 cans per case. The cleaner thoroughly removes oils and contaminants from rubber and plastic surfaces. It can be used with a scuff pad on raw bumpers and with a lint-free cloth to clean other plastic parts before applying the adhesion promoter.SMR-810
SMR-810speedokote
油
SMR-810 is a general purpose degreaser aerosol that removes silicone, grease, wax, tar, road film and other contaminants. It can be used as a pre-cleaner before grinding and sanding surfaces. SMR-810 comes in aerosol cans containing 12 cans per case. To use, wash the area with soap and water, dry it, apply SMR-810 liberally, let it penetrate contaminants, then wipe the surface clean with a dry cloth.SMR-800
SMR-800speedokote
油
SMR-800 is an aerosol gun cleaner that is designed to remove urethane, polyester, and waterborne paints. It comes in aerosol cans containing 12 cans per case. To use it, spray it directly into the paint inlet of the gun while pumping the trigger to flush out ports and inlets. It can also be applied to exterior surfaces to dissolve and wipe away paint residue.SMR-600
SMR-600speedokote
油
SMR-600 Speedo Basecoat Activator is an additive that can be used with other manufacturers' basecoats to increase the durability and longevity of the paint system. It comes in pint bottles in cases of 12 and should be added at a rate of 1-2 ounces per sprayable quart of basecoat according to the paint manufacturer's recommendations. The activator mixes with the basecoat and is applied following the paint manufacturer's application instructions.SMR-500
SMR-500speedokote
油
SMR-500 Speedo Stick is an adhesion promoter designed for use in the automotive refinish industry to promote strong adhesion of paint on plastic parts like bumper covers and interior panels. It contains etching resins that coat and seal plastic to allow adhesion of all types of paint systems without prior sanding, though sanding further enhances adhesion. Speedo Stick is applied with an air gun or cloth and allows painting within 20-30 minutes as adhesion fully develops over 12-24 hours of curing.SMR-230
SMR-230speedokote
油
Speedo Prime is a multi-use primer designed to prevent rust and seal out moisture on metal and plastic parts. It comes in aerosol cans in black, dark grey, medium grey, and light grey. Speedo Prime boasts excellent flexibility and adhesion, dries fast, has a high build quality, and is easy to sand before topcoating within 20 minutes. Application involves applying 2-3 coats with 1 minute between coats. It can be air dried within 10-15 minutes or express dried with a 5 minute bake at 120-140 degrees Fahrenheit.SMR-830
SMR-830speedokote
油
SMR-830 is a water-based pre-cleaner that removes road grime, silicone, grease and wax from surfaces. It leaves no residue when used properly and has a low VOC formula making it compliant with regulations. The pre-cleaner can be sprayed directly onto cool surfaces or applied with a cloth. It must remain wet on the surface to penetrate and dissolve contaminants before being wiped off with a clean, dry cloth. Proper use of the pre-cleaner is recommended before repair work to prevent contaminants from being forced into surfaces.SMR-995 Plastic Rejuvenator
SMR-995 Plastic Rejuvenatorspeedokote
油
SMR-995 Plastic Rejuvenator is 1K clear coating developed to restore color and gloss to
automotive trim, moldings, impact strips, tires and interior pieces. This durable coating will
also protect parts against fading. SMR-995 Plastic Rejuvenator contains UV resistors to
protect trim from further fading. Easy to apply, dries fast to a tack free surface.SMR-130
- 1. SMR-130 SPEEDO-LINE CLEAR (National Rule) TECHNICAL DATA DESCRIPTION: SMR-130 Speedo-Line Universal Clearcoat has been specifically formulated for the mobile repair industry. SMR-130 has been designed to increase profit without sacrificing quality. SMR-130 is a 2K acrylic urethane clear with superior UV and chemical resistance. TECHNICAL PRODUCT INFORMATION: SMR-130, Speedo-Line Universal Clearcoat utilizes new resin technology which allows for a fast cure while maintaining an ultra high gloss. SMR-130 is easy to apply and can be BUFFED in 2-4 HOURS, yielding a high DOI. PACKAGING: Part Number Description Temp. Size Qty. Case SMR-130 SPEEDO-LINE CLEARCOAT Gallon 4 SMR-60 SPEEDO-LINE Activator Fast 55属F - 65属F Quart 12 SMR-75 SPEEDO-LINE Activator Medium 65属F - 80属F Quart 12 SMR-85 SPEEDO-LINE Activator Slow 80属F - 95属F Quart 12 SMR-95 SPEEDO-LINE Activator X-Slow 95属F - up Quart 12 SMR-300-Q SPEEDO THIN SPEED REDUCER FAST 55属F - 65属F Quart 12 SMR-310-Q SPEEDO THIN SPEED REDUCER MEDIUM 65属F - 80属F Quart 12 SMR-320-Q SPEEDO THIN SPEED REDUCER SLOW 80属F - up Quart 12 MIX RATIO: SMR-130 is activated with (Speedo-Line Activator) at a 4:1 ratio and can be reduced up to 10% with SMR-300 / SMR-310 / SMR-320 Speedo Reducers. 4 Parts SPEEDO-LINE CLEAR 1 Part SPEEDO-LINE ACTIVATOR 5-10% Optional SPEEDO THIN SPEED REDUCER BASECOAT: Can be applied over any urethane compatible basecoat. Please follow the basecoat manufactures recommended clearcoat dry times. To increase Basecoat adhesion to substrate and/or clearcoat, add 5-10% SMR-600 Speedo Base Activator to mixed basecoat prior to application. SpeedoKote LLC 5701 N. Webster St. Dayton, Ohio 45414 (937) 280-0091 Fax (937) 280-0092 www.speedokote.com e-mail: sales@speedokote.com
- 2. GUN SETUP Fluid Tip psi Mini Spray Gun 1.0 1.3mm 5-15 psi Conventional Gravity Feed 1.3mm 25-30 psi APPLICATION Using a 1.0-1.3 mm spray tip, apply 2-3 coats continuously until desired leveling is achieved. No flash required between coats. DRY TIMES Air Dry Flash Between Coats 0 minutes Dust Free 5 minutes Air Dry 2-4 hours Express Dry Flash Between Coats 0 minutes Flash Before Force Dry 5 minutes Bake Time 15 minutes @120属F to 140属F BLENDING Using SMR-400-Q / SMR-410-A Speedo Blend apply a light mist to blend edge until desired look is achieved. RECOATABILITY/REPAIR SMR-130 Speedo-Line Clear may be recoated for repair. After cool down when baked. Air dry repair 2-4 hours. SANDING/COMPOUNDING/POLISHING Optimum Times Express Dry After cool down Air Dry 2-4 hours Sanding Express Dry After cool down Light de-nib: 2000 grit wet Air Dry 2-4 hours Light de-nib: 2000 grit wet Compounding Express Dry After cool down Foam compound pad (recommended) Air Dry 2-4 hours Foam compound pad (recommended) Polishing Express Dry After cool down Foam polishing pad (recommended) Air Dry 2-4 hours Foam polishing pad (recommended) SpeedoKote LLC 5701 N. Webster St. Dayton, Ohio 45414 (937) 280-0091 Fax (937) 280-0092 www.speedokote.com e-mail: sales@speedokote.com