Yazan Al-Najjar MAJOR PROJECTS
0 likes148 views
The document outlines several projects completed by Yazan Al-Najjar for Silvertech Middle East involving control systems for oil and gas facilities in the UAE. The projects included installing electrical pumps and safety systems for wellheads, reprogramming existing fire and gas systems to include new devices, supplying and programming fire and gas panels for new wellheads, and establishing one-way data connectivity between offshore and onshore facilities using a data diode to securely transfer process data. The responsibilities achieved involved programming logic, conducting testing and commissioning, training operators, and ensuring communication between systems.
1 of 3
Download to read offline
Recommended
Nagy_CV_Docx
Nagy_CV_DocxNagy Ibraheem Abo El Khair, PMP
Ìý
Nagy Ibraheem Abo El-Khair is an automation engineer with over 10 years of experience working with Schneider Electric and other companies. He has extensive experience designing, implementing, and commissioning control systems using PLCs and HMIs from manufacturers such as Siemens, Omron, Schneider Electric, and Wonderware. Nagy has managed numerous process automation projects in various industries and countries, specializing in fire and gas safety systems. He is proficient in electrical and automation engineering, project management, and multiple programming languages.Nagy_CV_Docx
Nagy_CV_DocxNagy Ibraheem Abo El Khair, PMP
Ìý
Nagy Ibraheem Abo El-Khair is a control systems engineer with over 10 years of experience in automation projects. He has extensive experience designing and implementing safety instrumented systems using Triconex and Trident controllers. Some of his project experience includes fire and gas, ESD, and shutdown systems for oil and gas facilities in Qatar, Saudi Arabia, and Egypt. He is proficient in automation software like TriStation 1131, InTouch, and various PLC platforms.sayed bessat cv last rev (2)
sayed bessat cv last rev (2)Sayed Bessat
Ìý
1) Sayed Bessat Eid El kady is an Egyptian instrumentation and control engineer with over 15 years of experience working in power plants.
2) He has worked on numerous projects in Egypt and Saudi Arabia, holding positions like I&C commissioning engineer, instrument maintenance engineer, and construction engineer.
3) His experience includes working with control systems from companies like Siemens, GE, Alstom, and Emerson, as well as instrumentation including transmitters, valves, vibration monitoring, and DCS.CV
CVAbid Ali sheikh
Ìý
Engineer Abid Ali has over 24 years of experience working on instrumentation and control systems for power plants. He is currently working as a consultant I&C engineer on the conversion of 12 open cycle gas turbines to a combined cycle plant in Qassim, Saudi Arabia. His experience includes design review, construction supervision, and commissioning of control systems for various power plants in Saudi Arabia.Process Unit Module Automation - Leveraging concepts from ISA106
Process Unit Module Automation - Leveraging concepts from ISA106Abdul Susnerwala, P.Eng, CFSP, CAP
Ìý
PUMA is takes advantage of ISA 106. Presentation discusses about the idea of OPC Conditional Bridging. It also presents a case study done at one of Air Liquide's siteahmed saad cv
ahmed saad cvAhmed Saad
Ìý
This document is a curriculum vitae for Ahmed Mohamed Abd El Moneim Saad. It includes his personal details, education history, work experience, skills and qualifications. Some key points:
- He has a BSc in electronic and communication engineering from Tanta University in 2004.
- He has over 11 years of experience as an I&C commissioning and maintenance engineer working on various power plant projects in Egypt. This includes work on gas turbines from Siemens and GE, as well as steam turbines from Mitsubishi.
- His roles have included construction, commissioning, start up support, and maintenance engineering. He is skilled in control systems, instrumentation calibration, and commissioning testsCS0022 - Automotive PBS Conveyor and Controls
CS0022 - Automotive PBS Conveyor and ControlsNick Darrall
Ìý
This document summarizes a project to upgrade the control system and conveyor system for a painted body store (PBS) plant at a major UK automotive manufacturer. The project involved replacing the PLCs, HMIs, SCADA systems, variable speed drives, field devices, and communication networks to upgrade the system to current control standards. It describes the objectives to manage the project safely and the solution implemented using Siemens control platforms including new PLCs, drives, HMIs, and SCADA system. The client provided feedback that the new PBS system operates better than the old system and reduces bottlenecks for assembly.Matt Instr CV
Matt Instr CVMatthew Azanor
Ìý
The document provides a resume for Matthew Omavowan Azanor, an Instrument & Control Engineer with over 13 years of experience working on various oil and gas projects in Nigeria, South Korea, the US and Houston for companies like Chevron and Nigeria Agip Oil Company. His experience includes roles in engineering design, construction, commissioning, start-up, and maintenance of electrical, instrumentation and control systems on offshore platforms and FPSOs. He also has qualifications in electrical/electronics engineering and instrumentation and control technologies.abid1
abid1Abid Ali
Ìý
This curriculum vitae is for Engineer Abid Ali. He has 24 years of experience working in instrumentation and control engineering for power plants in Saudi Arabia. Currently he works as a consultant instrumentation and control engineer at a combined cycle power plant in Qassim, Saudi Arabia, where he is responsible for design review and ensuring contract compliance. He has extensive experience supervising installation, testing, and commissioning of control systems for gas turbines and other power plant equipment.Brij mohan cv
Brij mohan cvBrij Mohan
Ìý
Brij Mohan has over 10 years of experience in instrumentation and control engineering. He has expertise in project management, instrumentation, control systems, commissioning, and maintenance. Some of his roles include overseeing projects from conceptualization to execution, reviewing engineering documents, and ensuring smooth plant operations.E&I Role Firebag
E&I Role FirebagMarty York
Ìý
The document outlines the roles and responsibilities of an E&I Technician for C&SU Suncor. Key responsibilities include: attending safety meetings, inputting daily logs and hours, maintaining safety and training standards, providing punch lists when systems are walked down, preparing walk down packages, commissioning and calibrating various instruments and devices, commissioning and programming PLC systems, and performing cause and effect testing with the automation group. Duties also involve commissioning and start-up of instrumentation, VFDs, pumps, meters, detectors, and more to ensure systems are functioning properly.Martin Cv
Martin CvMartin Pallister
Ìý
This curriculum vitae is for Martin Pallister. It summarizes his work experience, education, and contact information. Pallister has over 15 years of experience in instrumentation and process control, currently working as a Master Artisan at Highveld Steel. Previously, he held roles including Workshop Manager, electronic supervisor, and apprentice. He has tertiary education in electrical maintenance and instrumentation. Pallister lives in Witbank and can provide references from previous managers and colleagues.Mechanical completion handbook1
Mechanical completion handbook1zulfikar N joel
Ìý
Mechanical Completion means verifying through checking, testing, and inspection that fabrication, construction and installation of a project meets all applicable rules, regulations, codes and standards as well as the design drawings and specifications. Mechanical Completion must be completed before commissioning to ensure the system is preserved and ready for commissioning.Programmable Logic Controllers
Programmable Logic ControllersRichmondEngineering1601
Ìý
This document discusses REW's experience providing programmable logic controller (PLC) systems and upgrading plant controls. It lists various industrial processes that REW has experience with including coal handling, bunker management, ash handling, water treatment, manufacturing, and more. The document also notes that REW can engineer, design, and supply PLC systems of all sizes for new or existing equipment and work with many major PLC platforms and manufacturers. Examples are given of small PLC systems REW has implemented.tayssircv_(2)1
tayssircv_(2)1Ahmed Tayssir
Ìý
This personal CV provides information about Ahmed Tayssir Mohamed, including his contact details, objective, education background, membership, personal data, language and computer skills, and extensive work experience in instrument and control systems engineering spanning 27 years. The CV details his roles and responsibilities on various projects for companies such as AMEC, ADCO, CCC, ADGAS, and ENPPI. It also lists his areas of experience, training courses, and 27 years of experience in distributed control systems, PLCs, safety systems, and more for chemical and petroleum industries.Vodaworld - As-built documentation
Vodaworld - As-built documentationhannese
Ìý
This document provides as-built documentation for a new transmitter room installation at Vodaworld in Midrand, South Africa for Multichoice. It includes photos of the site before and after installation, layouts of the transmitter room, electrical diagrams, and specifications for equipment installed including the satellite dish, antennas, and air conditioning units. Key details covered are the location, equipment installed, electrical and network setup, and support structures for the satellite components.MS CV May 2016
MS CV May 2016Maurice Strachan PMP
Ìý
This document provides a curriculum vitae for Maurice Strachan, who has over 40 years of experience as a project manager and engineer in the oil, petroleum, and mining industries. He has strong management, commercial, and technical skills, and has managed a wide range of projects globally for companies such as BP, Wood Group, and AMEC. His experience includes roles such as project manager, delivery manager, and engineering manager on projects involving oil field development, FPSOs, gas plants, and mining extraction facilities.Raghu Resume 
Raghu Resume Venakadasula RaghuNandan
Ìý
Raghu Venukadasula is applying for a position with ALSTOM Projects India Ltd. He has over 8 years of experience commissioning electrical systems for power plants. His experience includes commissioning generator and transformer protections, switchgears, generators, DC/UPS systems, and more. He was also involved in site management, coordinating commissioning activities and serving as a turn over package engineer. He provides details on his commissioning experience on various projects in India, Ghana, Iraq, Algeria, and Saudi Arabia.Ahmed Hussein
Ahmed HusseinAhmed Hussien
Ìý
This document is a curriculum vitae that provides personal and professional details about Ahmed Hussein Bayoumi Saleh. It lists his name, addresses, phone numbers, email addresses, date of birth, marital status, nationality, and proposed position. It then outlines his extensive experience over 35+ years in instrumentation and control engineering for various industrial plants and systems. This includes design, supervision, maintenance, and consulting roles on numerous projects in Egypt and other countries.TCL Control Systems
TCL Control SystemsTurbine Controls Ltd TCL
Ìý
TCL Control Systems provides control equipment for industrial plants based on commercial off-the-shelf hardware. They have over 25 years of experience supplying control systems for a wide range of industrial processes including rotating equipment, power stations, and water treatment systems. TCL works with various hardware manufacturers and has the expertise to design, install, and provide after-sales support for customized control systems.CV Ahmed 2016
CV Ahmed 2016Ahmed Adel AboElEla
Ìý
Ahmed Adel Said is an instrumentation engineer with over 10 years of experience working in the oil and gas industry in Egypt. He has worked as a senior instrumentation engineer at Qarun Petroleum Company since 2012 where he is responsible for production wells, central processing facilities, and shipping pumps. Prior to that, he worked as an automation engineer at Cairo Oil Refining Company from 2009 to 2012 where he installed and maintained control systems. He holds a Bachelor of Science degree in electrical engineering from University of Benha.Mechanical completion
Mechanical completionRonie Chu
Ìý
The document discusses mechanical completion, which involves checking and testing equipment, piping, instrumentation, and other components to confirm they are installed correctly and ready for commissioning. It describes the documentation involved, including mechanical completion certificates, check records, and punch lists. Various activities involved in mechanical completion are also outlined for disciplines like mechanical, electrical, instrumentation, and piping.Aa
AaAhmed Mounir
Ìý
The engineering company was hired to perform TAB works for the HVAC system at the Cairo West Air Base. The draft report includes technical reports on 3 fans, 7 split units, and sound measurements. EX-01 fan is achieving 492% flow and EX-02 is achieving 180% flow. Instrument used and calibration certificates are also included in the report.Special Seismic Certification OSHPD
Special Seismic Certification OSHPDmichaeljmack
Ìý
1. The document discusses special seismic certification requirements for nonstructural components in hospitals according to various building codes and standards.
2. Special seismic certification, also known as seismic qualification, requires components designated as seismic systems to demonstrate functionality after a design earthquake through shake table testing, analysis, or experience data.
3. The California Building Code and ASCE 7 provide requirements for both position retention of components to prevent falling hazards and special seismic certification to ensure continued operation of essential components.CV_AD1
CV_AD1Alex Druk
Ìý
This resume summarizes the professional experience of Alex Druk, an Australian electrical engineer specializing in instrumentation and control systems. He has over 35 years of experience working on projects around the world, holding roles such as senior control systems engineer, principal control systems engineer, and lead DCS engineer. His experience includes designing and implementing automation solutions for various industries using DCS platforms from manufacturers like Yokogawa, Honeywell, and Emerson.updated_ashishmalhotra
updated_ashishmalhotraAshish Malhotra
Ìý
Ashish Malhotra is seeking a career in an organization where he can grow with the company. He has 6 years of experience in control and instrumentation installation, commissioning, and maintenance. His experience includes commissioning control and instrumentation systems for the balance of plant areas like water treatment, fire fighting, emission monitoring, and cooling systems of multiple thermal power plants totaling 600MW capacity. He has a bachelor's degree in electronics and communication engineering and is proficient in SAP, safety training, and instrumentation calibration.Poster_EGY_TE_Anas Momen_Hilal-Failure Modes and Effects Analysis
Poster_EGY_TE_Anas Momen_Hilal-Failure Modes and Effects AnalysisAnas Momen
Ìý
1) The Failure Modes and Effects Analysis (FMEA) was conducted on the wellhead control panel (WHCP) of the Hilal Project in Egypt, the first time FMEA was used at such a scale in BP.
2) The FMEA identified potential failures in the WHCP's specially designed hydro-electrical control system and assessed risks, resulting in 63 actions to improve design reliability and safety.
3) Through participation of experts from various teams, the FMEA enhanced the WHCP design, enabled future Safety Integrity Level verification, and reduced risks associated with 40 items on the system. The study's procedures and lessons learned will guide BP on future projects.SOR-WellheadPressure
SOR-WellheadPressureLaQuayne Wright, CSHO
Ìý
This document discusses advances in instrumentation for wellhead pressure interlock protection. It describes issues with high maintenance needs and sensor clogging at Chevron well sites due to high paraffin content. A new pressure monitoring solution is proposed to provide long-term operation, low maintenance, and a flexible safety interlock system. The solution aims to prevent well operation under unsafe pressure conditions and address industry concerns around spill prevention and operational costs.Wellhead control panels
Wellhead control panelsGholamhossain Emami
Ìý
The document summarizes Wilson Mohr's wellhead control panel capabilities. The panel provides hydraulic power to well shutdown valves and includes manual and automated valves and gauges for local and remote operation. It controls the normal sequencing of opening and closing valves. An emergency shutdown switch is included. The panel integrates a hydraulic power unit, accumulator rack, and programmable logic controller-based control system to monitor processes, valves, and pumps and ensure proper sequencing for normal operation and emergency shutdown conditions.
More Related Content
What's hot (18)
abid1
abid1Abid Ali
Ìý
This curriculum vitae is for Engineer Abid Ali. He has 24 years of experience working in instrumentation and control engineering for power plants in Saudi Arabia. Currently he works as a consultant instrumentation and control engineer at a combined cycle power plant in Qassim, Saudi Arabia, where he is responsible for design review and ensuring contract compliance. He has extensive experience supervising installation, testing, and commissioning of control systems for gas turbines and other power plant equipment.Brij mohan cv
Brij mohan cvBrij Mohan
Ìý
Brij Mohan has over 10 years of experience in instrumentation and control engineering. He has expertise in project management, instrumentation, control systems, commissioning, and maintenance. Some of his roles include overseeing projects from conceptualization to execution, reviewing engineering documents, and ensuring smooth plant operations.E&I Role Firebag
E&I Role FirebagMarty York
Ìý
The document outlines the roles and responsibilities of an E&I Technician for C&SU Suncor. Key responsibilities include: attending safety meetings, inputting daily logs and hours, maintaining safety and training standards, providing punch lists when systems are walked down, preparing walk down packages, commissioning and calibrating various instruments and devices, commissioning and programming PLC systems, and performing cause and effect testing with the automation group. Duties also involve commissioning and start-up of instrumentation, VFDs, pumps, meters, detectors, and more to ensure systems are functioning properly.Martin Cv
Martin CvMartin Pallister
Ìý
This curriculum vitae is for Martin Pallister. It summarizes his work experience, education, and contact information. Pallister has over 15 years of experience in instrumentation and process control, currently working as a Master Artisan at Highveld Steel. Previously, he held roles including Workshop Manager, electronic supervisor, and apprentice. He has tertiary education in electrical maintenance and instrumentation. Pallister lives in Witbank and can provide references from previous managers and colleagues.Mechanical completion handbook1
Mechanical completion handbook1zulfikar N joel
Ìý
Mechanical Completion means verifying through checking, testing, and inspection that fabrication, construction and installation of a project meets all applicable rules, regulations, codes and standards as well as the design drawings and specifications. Mechanical Completion must be completed before commissioning to ensure the system is preserved and ready for commissioning.Programmable Logic Controllers
Programmable Logic ControllersRichmondEngineering1601
Ìý
This document discusses REW's experience providing programmable logic controller (PLC) systems and upgrading plant controls. It lists various industrial processes that REW has experience with including coal handling, bunker management, ash handling, water treatment, manufacturing, and more. The document also notes that REW can engineer, design, and supply PLC systems of all sizes for new or existing equipment and work with many major PLC platforms and manufacturers. Examples are given of small PLC systems REW has implemented.tayssircv_(2)1
tayssircv_(2)1Ahmed Tayssir
Ìý
This personal CV provides information about Ahmed Tayssir Mohamed, including his contact details, objective, education background, membership, personal data, language and computer skills, and extensive work experience in instrument and control systems engineering spanning 27 years. The CV details his roles and responsibilities on various projects for companies such as AMEC, ADCO, CCC, ADGAS, and ENPPI. It also lists his areas of experience, training courses, and 27 years of experience in distributed control systems, PLCs, safety systems, and more for chemical and petroleum industries.Vodaworld - As-built documentation
Vodaworld - As-built documentationhannese
Ìý
This document provides as-built documentation for a new transmitter room installation at Vodaworld in Midrand, South Africa for Multichoice. It includes photos of the site before and after installation, layouts of the transmitter room, electrical diagrams, and specifications for equipment installed including the satellite dish, antennas, and air conditioning units. Key details covered are the location, equipment installed, electrical and network setup, and support structures for the satellite components.MS CV May 2016
MS CV May 2016Maurice Strachan PMP
Ìý
This document provides a curriculum vitae for Maurice Strachan, who has over 40 years of experience as a project manager and engineer in the oil, petroleum, and mining industries. He has strong management, commercial, and technical skills, and has managed a wide range of projects globally for companies such as BP, Wood Group, and AMEC. His experience includes roles such as project manager, delivery manager, and engineering manager on projects involving oil field development, FPSOs, gas plants, and mining extraction facilities.Raghu Resume
Raghu Resume Venakadasula RaghuNandan
Ìý
Raghu Venukadasula is applying for a position with ALSTOM Projects India Ltd. He has over 8 years of experience commissioning electrical systems for power plants. His experience includes commissioning generator and transformer protections, switchgears, generators, DC/UPS systems, and more. He was also involved in site management, coordinating commissioning activities and serving as a turn over package engineer. He provides details on his commissioning experience on various projects in India, Ghana, Iraq, Algeria, and Saudi Arabia.Ahmed Hussein
Ahmed HusseinAhmed Hussien
Ìý
This document is a curriculum vitae that provides personal and professional details about Ahmed Hussein Bayoumi Saleh. It lists his name, addresses, phone numbers, email addresses, date of birth, marital status, nationality, and proposed position. It then outlines his extensive experience over 35+ years in instrumentation and control engineering for various industrial plants and systems. This includes design, supervision, maintenance, and consulting roles on numerous projects in Egypt and other countries.TCL Control Systems
TCL Control SystemsTurbine Controls Ltd TCL
Ìý
TCL Control Systems provides control equipment for industrial plants based on commercial off-the-shelf hardware. They have over 25 years of experience supplying control systems for a wide range of industrial processes including rotating equipment, power stations, and water treatment systems. TCL works with various hardware manufacturers and has the expertise to design, install, and provide after-sales support for customized control systems.CV Ahmed 2016
CV Ahmed 2016Ahmed Adel AboElEla
Ìý
Ahmed Adel Said is an instrumentation engineer with over 10 years of experience working in the oil and gas industry in Egypt. He has worked as a senior instrumentation engineer at Qarun Petroleum Company since 2012 where he is responsible for production wells, central processing facilities, and shipping pumps. Prior to that, he worked as an automation engineer at Cairo Oil Refining Company from 2009 to 2012 where he installed and maintained control systems. He holds a Bachelor of Science degree in electrical engineering from University of Benha.Mechanical completion
Mechanical completionRonie Chu
Ìý
The document discusses mechanical completion, which involves checking and testing equipment, piping, instrumentation, and other components to confirm they are installed correctly and ready for commissioning. It describes the documentation involved, including mechanical completion certificates, check records, and punch lists. Various activities involved in mechanical completion are also outlined for disciplines like mechanical, electrical, instrumentation, and piping.Aa
AaAhmed Mounir
Ìý
The engineering company was hired to perform TAB works for the HVAC system at the Cairo West Air Base. The draft report includes technical reports on 3 fans, 7 split units, and sound measurements. EX-01 fan is achieving 492% flow and EX-02 is achieving 180% flow. Instrument used and calibration certificates are also included in the report.Special Seismic Certification OSHPD
Special Seismic Certification OSHPDmichaeljmack
Ìý
1. The document discusses special seismic certification requirements for nonstructural components in hospitals according to various building codes and standards.
2. Special seismic certification, also known as seismic qualification, requires components designated as seismic systems to demonstrate functionality after a design earthquake through shake table testing, analysis, or experience data.
3. The California Building Code and ASCE 7 provide requirements for both position retention of components to prevent falling hazards and special seismic certification to ensure continued operation of essential components.CV_AD1
CV_AD1Alex Druk
Ìý
This resume summarizes the professional experience of Alex Druk, an Australian electrical engineer specializing in instrumentation and control systems. He has over 35 years of experience working on projects around the world, holding roles such as senior control systems engineer, principal control systems engineer, and lead DCS engineer. His experience includes designing and implementing automation solutions for various industries using DCS platforms from manufacturers like Yokogawa, Honeywell, and Emerson.updated_ashishmalhotra
updated_ashishmalhotraAshish Malhotra
Ìý
Ashish Malhotra is seeking a career in an organization where he can grow with the company. He has 6 years of experience in control and instrumentation installation, commissioning, and maintenance. His experience includes commissioning control and instrumentation systems for the balance of plant areas like water treatment, fire fighting, emission monitoring, and cooling systems of multiple thermal power plants totaling 600MW capacity. He has a bachelor's degree in electronics and communication engineering and is proficient in SAP, safety training, and instrumentation calibration.Viewers also liked (17)
Poster_EGY_TE_Anas Momen_Hilal-Failure Modes and Effects Analysis
Poster_EGY_TE_Anas Momen_Hilal-Failure Modes and Effects AnalysisAnas Momen
Ìý
1) The Failure Modes and Effects Analysis (FMEA) was conducted on the wellhead control panel (WHCP) of the Hilal Project in Egypt, the first time FMEA was used at such a scale in BP.
2) The FMEA identified potential failures in the WHCP's specially designed hydro-electrical control system and assessed risks, resulting in 63 actions to improve design reliability and safety.
3) Through participation of experts from various teams, the FMEA enhanced the WHCP design, enabled future Safety Integrity Level verification, and reduced risks associated with 40 items on the system. The study's procedures and lessons learned will guide BP on future projects.SOR-WellheadPressure
SOR-WellheadPressureLaQuayne Wright, CSHO
Ìý
This document discusses advances in instrumentation for wellhead pressure interlock protection. It describes issues with high maintenance needs and sensor clogging at Chevron well sites due to high paraffin content. A new pressure monitoring solution is proposed to provide long-term operation, low maintenance, and a flexible safety interlock system. The solution aims to prevent well operation under unsafe pressure conditions and address industry concerns around spill prevention and operational costs.Wellhead control panels
Wellhead control panelsGholamhossain Emami
Ìý
The document summarizes Wilson Mohr's wellhead control panel capabilities. The panel provides hydraulic power to well shutdown valves and includes manual and automated valves and gauges for local and remote operation. It controls the normal sequencing of opening and closing valves. An emergency shutdown switch is included. The panel integrates a hydraulic power unit, accumulator rack, and programmable logic controller-based control system to monitor processes, valves, and pumps and ensure proper sequencing for normal operation and emergency shutdown conditions.Ashraf CV
Ashraf CVAshraf AL Najjar
Ìý
Mohammed Najjar is seeking a position as a Supervisor in a growing retail store. He has over 5 years of experience as a Store Supervisor at Diesel stores in Abu Dhabi. He enjoys supervising staff and ensuring good customer service. Najjar is self-motivated, trustworthy, and has excellent communication and customer service skills.Mohannad Alhousani CV (2)
Mohannad Alhousani CV (2)Mohannad Alhousani
Ìý
Mohannad M. Alhousani is seeking a position in civil engineering. He has a Bachelor's degree in civil engineering from the University of Jordan with a GPA of 3.0/4. He has work experience at various construction companies including Specialized for Thermal and Acoustical Insulation Company, Arab Towers Contracting Company, and MERAS CONTRACTING COMPANY where he currently works as Site Manager. He has strong skills in AutoCAD, Revit, Microsoft Office, communication, and teamwork.cv mazen hasan Senior INTERIOR DESIGNER AND Architecture (3)
cv mazen hasan Senior INTERIOR DESIGNER AND Architecture (3)MAZEN HASAN
Ìý
Mazen Issa Hasan is a Jordanian interior designer and architect with 13 years of experience. He holds a Bachelor's degree in Interior Design and Architecture from Al-Balqa'a Applied University. Mazen has worked as an interior designer and project manager on various commercial, residential, and hotel projects in Abu Dhabi, Sharjah, Jordan, and Saudi Arabia. His responsibilities have included design, project management, production management, and showroom supervision. Mazen is proficient in 3D modeling software and AutoCAD and has experience with quality and safety standards.Mazen Abbas CV
Mazen Abbas CVMazen Abbas
Ìý
Mazen Ali Abbas is a Syrian national seeking a new position in education, training, or administration. He has over 20 years of experience in training and operations management, business analysis, systems engineering, and computer instruction. His background includes roles as a training manager, CBP trainer, systems engineer for the Syrian Ministry of Finance, and technical instructor. He holds an MSc in electronics and automation engineering and certificates in project management, CBP training, and various computer applications.Mazen Daraweesh CV..
Mazen Daraweesh CV..Mazen Darweesh
Ìý
Mazen Ali Darwish is a quality control and safety professional with over 25 years of experience in the food industry. He currently works as the Production Sites Quality Manager for ASTRA Food Company in Tabuk, Saudi Arabia. In this role, he has successfully obtained GLOBAL G.A.P and ISO food safety certifications for multiple production sites. He oversees quality audits and ensures compliance with standards. Previously, he held several managerial roles relating to materials, sales, and production for ASTRA Food Company. Mazen has a Bachelor's degree in Business from the American University of London and has extensive training in quality management systems and food safety.Abdallah Al Najjar
Abdallah Al NajjarAbdallah AL_Najjar
Ìý
This document contains personal and professional information for Abdallah Ismail Mohammad Al Najjar. It includes his contact information, marital status, nationality, date and place of birth. It outlines his career objective to work in healthcare and gain experience. It lists his education as a BSc in Nursing from Al-Mousel University from 1998-2002. It details his skills, work experience including current role as nursing administrator at Alquds Hospital since 2012, and certificates. Languages are listed as Arabic as native and good English speaking and writing. References are available upon request.Mazen CV
Mazen CVMazen Mroue
Ìý
This document provides biographical information about Dr. Mazen Mroueh, including his education, work history, positions of responsibility, and career as a football trainer and coach. Some key details:
- Dr. Mroueh has a PhD in Pedagogies from Kiev University of Physical Culture and Sports from 1989-1992.
- He worked as an assistant professor at the Lebanese University from 1996-2014 and has held several positions related to physical education.
- His career involves many roles related to football coaching, including administrative coordinator and lecturer for several coaching licenses in Lebanon organized by the Asian Football Confederation.
South Pars Gas Field Development ~ Phases 17/18 Project - Offshore Platforms
South Pars Gas Field Development ~ Phases 17/18 Project - Offshore PlatformsSaeed Moosavi
Ìý
This document provides an overview of the South Pars Gas Field Development project in Iran. It describes the offshore and onshore facilities, including four wellhead platforms that will produce gas from the field. It outlines the safety systems and concepts implemented, such as area classification, gas detection, emergency shutdown, and escape routes. The document discusses the process safety philosophy and shutdown procedures to safely control the facility during normal and emergency operations.Ezz Al deen AL Najjar CV
Ezz Al deen AL Najjar CVEzz Aldeen Al Najjar
Ìý
Ezz Aldeen Mahmoud Najjar's CV provides his personal and professional details. He is a 62-year old Jordanian man who has been married with the Income and Sales Tax Department of the Ministry of Finance since 1999, currently as Assistant Director General. He received a Bachelor's degree in Accounting from Marathwada University in India in 1984 and has over 30 years of experience in accounting and financial management roles for the Jordanian government and Jordanian Electric Power Company.Basic cpp presentation(1)
Basic cpp presentation(1)nguyen_uptorcem
Ìý
The presentation provided an overview of a central processing platform (CPP) and its key facilities for processing oil and gas. A CPP typically includes inlet manifolds and separators to separate fluids into gas, oil and water phases. It also includes facilities like condensate stabilization, flash gas compression, gas purification, natural gas liquid recovery, water treatment, and gas compression. A CPP processes fluids from wellhead platforms upstream and exports processed gas downstream. It is a manned facility that also requires various utility systems to support operations.Mohammad Mazen CV
Mohammad Mazen CVMohammad Odeh
Ìý
This document contains the resume of Mohammad Mazen Moh’d Odeh. It summarizes his career history as an IT Engineer for ARABTEC Constructions in Abu Dhabi since 2008. It lists his responsibilities such as installing and maintaining servers, printers, software, and setting up user accounts. It also outlines his programming languages including VB.Net, SQL Server, Oracle, and Macromedia Flash. Finally, it provides details on his education at Hashemite University in Computer Information Systems and trainings in SQL Server and Oracle.Similar to Yazan Al-Najjar MAJOR PROJECTS (20)
Mr. Ahmed ElSewassy
Mr. Ahmed ElSewassyAhmed ElSewassy
Ìý
Ahmed Mohamed Ali Hassan is a senior Triconex engineer based in Cairo, Egypt with over 7 years of experience in industrial automation projects in oil and gas, power plants, cement, and petrochemicals industries. He has expertise in safety instrumented systems including emergency shutdown, fire and gas, and burner management systems. Some of his project experiences include projects for Invensys, ASEC Cement, SABIC, Petrofac, and Saudi Kayan. He holds a Bachelor's degree in Electrical Power and Machines from Cairo University.FInal_CV_08_4_2016
FInal_CV_08_4_2016PANKAJ PAL
Ìý
Pankaj Pal provides a summary of his experience and qualifications for a middle management role in automation and instrumentation. He has over 5 years of experience in project engineering, design, software development, commissioning, and technical support of automation systems. He is proficient in PLC programming, SCADA application development, loop testing, commissioning, and network configuration. He has worked on numerous automation projects in industries such as oil and gas extraction, water treatment, power generation, and grain storage.Sondus Ahmed - CV - 2016
Sondus Ahmed - CV - 2016Sondus Ahmed
Ìý
Sondus Ahmed has over 7 years of experience as a project engineer working on control system projects in Kuwait and Egypt. Her roles have included I/O assignment, wiring diagrams, function design specifications, and database management. She has a bachelor's degree in chemical engineering and certifications in Six Sigma, Experion PKS, and HSE trainings. Her skills include AutoCAD, Microsoft Office, and working collaboratively under pressure as part of a team.Resume McWhirterDerek
Resume McWhirterDerekDerek McWhirter
Ìý
Derek McWhirter is an advisory engineer with extensive experience designing, implementing, and commissioning control systems for oil and gas production and processing facilities, power generation equipment, and industrial plants. He has proficiency with many PLCs, HMIs, and other control devices, as well as software to configure them. Representative projects include control system upgrades and additions for Chevron, Dow Chemical, HESS, Frito Lay, Solae, NASA, Marathon, Unocal, and Solar Turbines facilities.CV-Bokarica
CV-BokaricaCvjetko Bokarica
Ìý
This CV summarizes Cvjetko Bokarica's experience as a lead instrument and automation engineer working in oil, gas and petrochemical plants. He has over 30 years of experience managing projects and maintenance for facilities in Saudi Arabia, Qatar, Italy and Croatia. His areas of expertise include DCS, PLC, SCADA, safety, fiber optics and other process automation systems.Debashis_Resume
Debashis_ResumeDebashis mishra
Ìý
Debashis Mishra is an industrial automation professional with nearly 5 years of experience in process automation, system design, installation, commissioning, project engineering, and sales support. He is currently a Proposal/Sales Support Engineer at Emerson Export Engineering Centre in Pune. Some of his responsibilities include preparing technical and commercial proposals for automation projects in industries such as oil & gas, water treatment, and more. He has comprehensive knowledge of DCS, PLC, SCADA and safety systems and has worked on numerous automation projects across various domains.Mohamed Zakaria 01-2017
Mohamed Zakaria 01-2017Mohamed Zakaria
Ìý
Mohamed Zakaria Kamel is an Automation and Control Engineer seeking a new role. He has over 7 years of experience working with Siemens automation systems, including designing, installing, and commissioning PLC, HMI, and SCADA systems. He has a B.Sc. in Electrical Engineering and is proficient in Siemens Step 7, TIA Portal, WinCC, and AutoCAD.WV CV_Eng_2016
WV CV_Eng_2016Wynand Vermeulen
Ìý
This curriculum vitae summarizes the qualifications and experience of Wynand Vermeulen, a 53-year-old South African citizen. He has over 30 years of experience in electrical engineering, working across various industries including steel plants, mining, and oil drilling. His experience includes maintenance, programming, commissioning, and optimization of industrial automation equipment such as PLCs, drives, instrumentation, and process control systems. He has qualifications in electrical engineering and trades such as millwright.CV_Sandeep Anugade
CV_Sandeep AnugadeSandeep Anugade
Ìý
This document contains a resume for Sandeep L. Anugade, an automation professional with over 10 years of experience in hardware engineering, designing, commissioning, and executing automation projects for various industrial domains. It lists his technical skills and experience programming PLCs from Siemens and Allen-Bradley, along with HMIs, drives, and other industrial software. It also provides details on several automation projects he has worked on, including for power plants, hydroelectric plants, and automotive manufacturing facilities.ICS ENGINEER CV WITH IMAGE (doc)
ICS ENGINEER CV WITH IMAGE (doc)Vijayakumar Kumar
Ìý
This document provides a curriculum vitae for G.D. Vijayakumar, an Instrument & Control System Engineer with over 9 years of experience in process automation projects. He has expertise in configuring and testing DCS systems from manufacturers like Yokogawa and Emerson. He provides details on his past work experience with SK Engineering & Construction and Onyo Engineering, where he led commissioning and start-up activities for oil, gas and petrochemical projects.Mohamed Shawky Ashour CV
Mohamed Shawky Ashour CVMohamed Shawky
Ìý
Mohamed Shawky Ashour is a senior control system engineer with over 12 years of experience in instrumentation, process control, and DCS systems like Yokogawa CENTUM CS3000, CENTUM VP, and ProSafe-RS. He has worked on numerous projects in countries like Saudi Arabia, the UAE, Bahrain, Italy, the UK, and Egypt for companies such as Yokogawa, Total, BP, ExxonMobil, and BG. His areas of expertise include engineering, commissioning, startup, and maintenance of Yokogawa DCS and safety systems.Mohamed Shawky Ashour CV
Mohamed Shawky Ashour CVMohamed Shawky
Ìý
Mohamed Shawky Ashour is a senior control system engineer with over 12 years of experience in instrumentation, process control, and DCS systems like Yokogawa CENTUM CS3000, CENTUM VP, and ProSafe-RS. He has worked on numerous projects in countries like Saudi Arabia, UAE, Bahrain, Egypt, UK, Italy, and more. His expertise includes engineering, installation, commissioning, maintenance, and troubleshooting of Yokogawa DCS and safety systems.CV 2016 SALAH
CV 2016 SALAHSalah Taman
Ìý
Salah Mohamed Mohamed Ibrahim Taman is currently the Head Manager of the Instrumentation and Control Department at ELDelta Co. for Fertilizers Chemical Industries in Egypt. He has over 20 years of experience in instrumentation, control systems, electronics, networking and communication engineering. He received a B.Sc. in Electronics Engineering from Mansoura University in Egypt, specializing in computers and control systems. He has extensive experience working with DCS, PLC, SCADA and other process control systems. He also has skills in maintenance, calibration, programming and troubleshooting of various field instrumentation.Resume
ResumeAswin Sha
Ìý
The document provides a summary of an automation engineer's skills and experience including:
- Developing SIL 3 safety systems using Yokogawa ProSafe and Schneider Unity Pro SIL 3 PLCs.
- Programming RTUs using SCADAPack Workbench and Twinsoft.
- Creating SCADA applications in Citect and Clear SCADA.
- 5 years of experience in projects involving DCS and PLC systems from Yokogawa, Schneider, and Honeywell.Ahmed Elsayed Salem CV
Ahmed Elsayed Salem CVAhmed Salem
Ìý
Ahmed Salem is an Egyptian electrical engineer seeking a project manager position. He has 15 years of experience managing electrical substation projects in Saudi Arabia and Egypt, including experience designing, testing, and commissioning high voltage equipment. His background includes designing transmission line schematics, configuring protection relays, and managing projects from conception to energization. He is proficient in English and Arabic and knowledgeable about computer design programs, project management software, and electrical engineering simulation tools.TechComp_overview_brief
TechComp_overview_briefTheodore (Ted) Corbeill Jr
Ìý
TechComp is an automation and controls integration firm founded in 1997 and headquartered in Chesapeake, VA. They specialize in integrating hardware and software from various manufacturers to customize automation and data solutions for clients. TechComp aims to form long-term partnerships by supporting clients' maintenance needs and becoming an extension of their engineering teams. They provide services including installation, configuration, troubleshooting, and upgrades across hardware, software, and integrated automation systems.KP Controls CV 1.4
KP Controls CV 1.4kevin pratt
Ìý
This curriculum vitae is for Kevin Pratt, who has over 20 years of experience as an electrician and control/commissioning engineer working with process control systems. He currently works as the director and control engineer at his own company, KP Controls, where he has worked on major projects for Diageo distilleries. Some of his responsibilities include design, documentation, programming, commissioning, training, and optimizing automation systems. He has extensive experience working with PLCs and HMIs from manufacturers such as Siemens, Allen-Bradley, and Schneider.Saurabh Singh - CV.DOC
Saurabh Singh - CV.DOCsaurabh singh
Ìý
The document provides a summary of the candidate's skills and experience in industrial automation, BMS security systems, and SCADA/HMI development. It details over 5 years of experience in areas such as PLC programming, instrumentation installation, network configuration, and commissioning of district cooling plants, energy transfer stations, and other process automation and building management systems. Various roles and responsibilities on projects are outlined that demonstrate experience with common PLCs, SCADAs, and protocols as well as project execution from design to testing and documentation.Shahid_Bilal_CV_F_19012016
Shahid_Bilal_CV_F_19012016Shahid Bilal
Ìý
- MuhammadShahid Bilal has 14 years of experience as an electronic engineer working with PLCs and automation controls in cement plants in Pakistan and Saudi Arabia.
- He holds a Bachelor's degree in Electronics Engineering and is seeking a managerial position to make full use of his skills and experience in programming various PLC software, maintaining instrumentation systems, and minimizing plant downtime.
- His experience includes extensive programming with Schneider PLC software, Siemens PLC software, ABB DCS software, frequency drives, and FLS automation software, as well as maintaining and calibrating various field instruments.Electrical Engineer cv.PDF
Electrical Engineer cv.PDFMuhammad Zuhad Siddiqui
Ìý
M. Zuhad Siddiqui has applied for the position of Electrical Engineer. He has 6 years of experience working on electrical projects in Saudi Arabia and Pakistan. His current role involves overseeing installation and maintenance of electrical equipment, control systems, and field instruments at power plant and substation projects. He holds engineering licenses in Saudi Arabia and Pakistan and has educational qualifications of a B.E in Electronics Engineering.Yazan Al-Najjar MAJOR PROJECTS
- 1. Yazan Al-Najjar Attachment: MAJOR PROJECTS LIST Employer: SILVERTECH MIDDLE EAST PROJECT: INSTALLATION OF ELECTRICAL SUPMERSABLE PUMPS IN WELLHEAD-7 AND WELLHEAD-15 END USER : ZADCO. PROCESS : FIRE & GAS, ESD, DCS WORKPLACE: UMM AL-DALAKH (OFFSHORE) CONTROL SYSTEM: Siemens PCS7 v7.1 SP4 STATUS: DONE SCOPE DESCIPTION: • Design & Execute the complete fire & gas system and ESD system (Siemens S7-400) for Wellhead-07 and Wellhead-15 in UMM AL-DALAKH field and integrate them with the existing DCS system for the field (PCS7). • Design & supply five Panel Door HMI WinCC flexible. • Update the graphics & alarms of existing DCS Servers control room. • The ESD and Fire & gas Systems are SIL-3 safety certified Systems (Exd). • The Fire & gas System is having the following detectors: HC- Flammable gas detectors, H2S- Toxic Gas detectors, Flame Detectors and Smoke Detectors in addition to MACs and Sounders / Beacons. • Supplying Explosion Proof Engineering Station (Laptop) . RESPONSIBILITIES ACHIEVED: • Programming the logic for all IOs of ESD, F&G and RTUs for the wellheads. • Establish the communication between those systems and the DCS system over S7-connections. • Commissioning the whole project • Conducted a Training for ZADCO Operators & maintenance engineers about the Functionality of Safety PLC and all the required troubleshooting techniques • Configure all the alarm, events and faceplates in the DCS, Employer: SILVERTECH MIDDLE EAST PROJECT: SATAH FULL FIELD DEVELOPMENT END USER : ZADCO PROCESS : F&G, RTU COMMUNICATION WITH ARZANAH ISLAND WORKPLACE: SATAH, UAE (OFFSHORE) CONTROL SYSTEM: SIEMENS S7-400, STEP7, WinCC Flexible STATUS: DONE SCOPE DESCIPTION: • Reprogram the existing F&G system to include all new F&G devices and optimize the running program. • Programming the new installed instrumens and devices which are connected to main production platform RTU. • Updating all local HMIs in all wellheads to include the new modifications. • Upgrade RTUs from 300 series to 400 series. RESPONSIBILITIES ACHIEVED: • Re program the existing F&G system to include all new F&G devices and optimize the running program. • Programming the new installed instrumens and devices which are connected to main production platform RTU • Updating all local HMIs in all wellheads to include the new modifications • Conducting the FAT. • Commissioning the Project.
- 2. Yazan Al-Najjar Attachment: Employer: SILVERTECH MIDDLE EAST PROJECT: FIRE AND GAS SYSTEM FOR THE NEW WELLHEADS (PC-110, PC-055, ZW-100) END USER : ZADCO PROCESS : FIRE AND GAS SYSTEM WORKPLACE: UPPER ZAKUM, UAE (OFFSHORE) CONTROL SYSTEM: SIEMENS S7-400, STEP7, WinCC Flexible STATUS: DONE SCOPE DESCIPTION • Supply three Fire and Gas panels for the wellheads with Siemens control system based. • Supply three door mounted HMIs configured in WinCC flexible. • Establish communication between Siemens F&G panel and existing Honeywell RTUs over Modbus RS-485. • Training for ZADCO operators. RESPONSIBILITIES ACHIEVED : • Programming the logic for the F&G system. • Leading & conducting the I.F.A.T • IFAT with Honeywell team in Abu Dhabi • Trainig for ZADCO operators. • Engineering & Documentation of the major PLC specifications Employer: SILVERTECH MIDDLE EAST PROJECT: UMM LULU END USER : ZADCO PROCESS : F&G, ESD, DCS WORKPLACE: UMM AL-DALAKH, UAE (OFFSHORE) CONTROL SYSTEM: SIEMENS S7-400, PCS7, STEP7 STATUS: DONE SCOPE DESCIPTION • Expansstion of the Existing F&G, DCS and ESD systems in CPC. • Updating all DCS screens and alarms. • Communication with many therd party packages over Modbus (MPFM, HVAC, H2S Analyser,..). • Documentation and Training for ZADCO operators. RESPONSIBILITIES ACHIEVED : • Programming the logic for the F&G system. • Leading & conducting the I.F.A.T • IFAT with third party packages. • Engineering & Documentation. • Training for ZADCO Operators.
- 3. Yazan Al-Najjar Attachment: Employer: SILVERTECH MIDDLE EAST PROJECT: ONE WAY DATA CONNECTIVITY BETWEEN UAD AND ZADCO HQ (DATA DIODE) END USER : ZADCO. PROCESS : DATA DIODE WORKPLACE: UMM AL-DALAKH (OFFSHORE) & ZADCO HQ CONTROL SYSTEM: FOX IT DATA DIODE / SQL SERVER / WinCC Explorer STATUS: 90% DONE SCOPE DESCIPTION: • As IT security recruitment in ZADCO network, the firewall architecture is not enough to guarantee the security of the connection between Offshore (UAD) and ZADCO HQ, the scope was to reflect the database of the archive server in UAD to ZADCO HQ servers without handshaking connections. RESPONSIBILITIES ACHIEVED: • Scripting VB tasks in UAD archive server to map all UAD running field data in SQL database and send them throw the Data Diode to ZADCO HQ and map it again ins ZADCO WinCC servers. • Configuring near real time data monitoring and reporting for UAD in ZADCO HQ. • Configuring Web accessing for WinCC near real time data.