�ݺ�ߣ

1
In the name of Allah, the Beneficent, Merciful
PERSONAL DATA
Name : Mohamed Ahmed Tawfik Farag
Date of birth : 1/8/1980
Job name : Instrument and Control Engineer
Nationality : Egyptian
Marital Status : Married
Military Service : Completed
Language : Arabic (native language) & English (v. good)
Qualifications : B.Sc. in Electronics Engineering
Year : MAY 2002
University : Mansoura University
Department : Electronics Engineering (Computer and control system)
Project : Formatting &Packing petroleum pipes using PLC.
Project Grade : Excellent
Final Grade : Good
Permanent address : Dikirns, Mansoura, Dakahliya - Egypt
Telephone : 050-6570133 & Mobil: 01008456080
E-mail : Mtawfik@UGDCO.com
: Mohamed.Tawfik80@yahoo.com
Computer Skills:
- Very good t in Windows and MS-Office
- Very good in using the internet
- Very good in PC installation and maintenance
Experience:
- 11 years in Instrumentation and Control Systems
Last job:
- Instrument & Control Engineer at NGL plant
Training course:
-Measurement and control
-Risk Assessment & Management
Solar technical training:
 Principle operation procedures comprising SOLARMARS 100 GAS TURBINE GENERATORSETS
 TT4 control systemoperation Comprising Turbotronic 4 control systemoperation
 Analytic Troubleshooting comprising Turbotronic 3 & 4 troubleshooting
NOTE:
-I have no problem to relocate inside or outside Egypt.
 -I am self-motivated and can work hard for long hours.

2
WORK EXPERIENCE
1-From July 2005 to 20/5/2008, working in Advanced Electronic Engineering Company (AEE) as an
Instrumentation and Control Engineer especially the following:-
1-Process controllers: - Especially (EUROTHERM, HONYWELL, JUMO, ASCON, EMKO)
2-AC/DC Speed controllers: - Especially (EUROTHERM, SIEMENS, ABB, TELEMECHANIQUE, FUJI
3-Leve measurement:-Especially VEGA
4-Temperature controllers:- Especially (ASCON, HONEYWELL, EUROTHERM , JUMO,EMKO).
5-Electical counters, Timers & Frequency meters. - Especially Kubler
2- From 21/5/2008 till now, working at NGL Plant (United Gas Derivatives Company “UGDCO”) as an
Instrumentation and Control Engineer through EMC Company.
1-PLC Experience:
 Modification and Trouble Shooting for Koyo PLC, Mitsubishi PLC
 Modification and Trouble shooting for Allen Bradley PLC (PLC5, RSlogix5 & SLC500,
RSlogix500 & RSlogix5000)
2-Fire and gas system:
 Install and Commissioning with INVENSYS Rep. new F&G system
(Triconex) in UGDCO at Damietta site.
 Modification and Trouble Shooting for Triconex PLC (Translation 1131,Version 4.1)
3-ESD system:
- Good handling with ESD systems HIMA H51q ELOP II engineering tool, and troubleshooting.
4-DCS:
-Good handling with DCS FOXBORO I/A series, Historical trends, System alarms, and troubleshooting.
5–F&G system:
A- Responsible for Maintenance and Trouble Shooting of Fire & Gas Sys., which include the following:
 Control System used to monitor field mounted industrial Gas Detector.
 The systems include Engineering Card, Control Card and Fields Interface Card.
B- Responsible for maintenance and troubleshooting the following Instruments:
 Gas Detector: (DET-TRONICS)
 Hydrogen Gas Detector .(DET-TRONICS)
 Fire Detector:
a- Smoke Detector b- Heat Detector
c- Heat Detector d- UV/IR Flame Detector (DET-TRONICS)
E- Manual Call Point
 Annunciation Devices
a- Sounder b- Siren (Motor Driven)
c- Fire Alarm Beacon
 Fire Detector Used For Diesel Generator:
a- Heat Detector b- Manual Release
c- Solenoid and Co2 Cylinder
D- FM-200 system
6-Gas Plant Experience:
 Installation, Maintenance and Troubleshooting of Isolating Signal Barrier
 Review and Check Cause and Effect with Function Logic Program
 Loop Check from Field to PC (Engineering Computer).
 Check all Signals Connected between DCS and Field.
 Follow up shipment loading activities at UGDCO facilities.

3
 Maintenance, Trouble Shooting Calibration for ENRAF (ATG) Automatic Tank Gauge for
propane Tank
 Maintenance And Trouble Shooting for Utility Area of Gas Plant which include the following
packages:
1. Instrument Air Compressor
2. Instrument Air Dryer
3. Nitrogen Unit
4. Fire Fighting System Which Include The following:
a. Two Water Jockey Pumps
b. Two Water Diesel Pumps
c. Three Deluge systems
d. Two Elevated monitors
 Maintenance and Trouble Shooting for Flare System
 Bentley Nevada System Model 3300 for Protection Compressor from Temperature, Vibration
and velocity
7- Solar Turbine Experience:
1. Principle operation procedures comprising SOLARMARS 100 GAS TURBINE GENERATOR SETS
2. TT4 control systemoperation Comprising Turbotronic 4 control systemoperation
3. Analytic Troubleshooting comprising Turbotronic 3 & 4 troubleshooting
4. Carry out 4.000 & 8.000 Hour PM and overhauling maintenance (Inst. Tasks).
8- Calibration, Troubleshooting major overhauling Maintenance of the Following Instruments:
1. Control Valves (ABB, Fisher, Masoneilan) with its positioner control and pressure
regulator.
2. ESD Control Valves (ON/OFF Valves)
3. Pressure safety relief (PSV)
4. Pressure, Flow, Level, Temperature Switches
5. Pressure, Flow and Temperature Chart recorder
6. Pressure Transmitters (Fisher Rosemount, Honeywell &Yokogawa)
7. Flow Transmitters:
 Orifice Type (Fisher Rosemount & Yokogawa).
 Vortex Type (Fisher Rosemount &Yokogawa).
 Ultrasonic Type (Panametric)
 Turbine Flow meter
8. Temperature Transmitters (Fisher Rosemount)
9. Level Transmitters
o Differential Pressure Type (Fisher Rosemount).
o Displacement Type (Fisher Rosemount& Foxboro).
10. Electro-Pneumatic Transducers I/P
11. Isolating Signal Transmitters
12. MTL 700 Series Shunts Diode Safety Barrier
13. UV/IR Flame Detectors
14. Vibration Switches
9-Check Spare Parts and Review Stock level on Maximo
10- Completed work orders and review Stock level on Maximo

�ݺ�ߣ

Mohammed Tawfik CV 4-2016

Recommended

More Related Content

What's hot (10)

Similar to Mohammed Tawfik CV 4-2016 (20)

Mohammed Tawfik CV 4-2016