An earthquake occurs due to a sudden slip or movement along a fault line in the Earth's crust. This movement releases built-up energy in the form of seismic waves that travel outward from the hypocenter or focus of the earthquake. The intensity of shaking and damage is greater near the epicenter, which is the point on the surface directly above the focus. Earthquake magnitude measures the energy released while intensity scales describe the observed effects on people and structures. Large earthquakes can sometimes generate tsunamis when the sudden movement of underwater faults displace large volumes of water.
The document discusses earthquakes and how they occur. It explains that earthquakes are caused by sudden movement along faults in the Earth's crust due to a build up of stress. There are three main types of faults - normal, reverse, and strike-slip - each forming in a different way due to tension or compression in the crust. When friction along a fault is overcome, the fault will slip and move, causing seismic waves that produce shaking during an earthquake. The intensity of shaking and damage decreases further from the earthquake's epicenter.
Earthquakes are caused by the sudden release of built-up strain energy along fault lines in the Earth's crust. Faults occur at boundaries between tectonic plates where the plates slide past each other. There are different types of faults such as normal, reverse, strike-slip and oblique. Earthquake waves called seismic waves radiate out from the hypocenter or focus of the earthquake. P-waves and S-waves are two types of seismic waves that travel through the Earth. Surface waves including Rayleigh and Love waves cause the most damage during an earthquake. Factors like magnitude, distance from the epicenter, local geology can influence earthquake intensity.
Earthquakes earthquake measurements slides and pdf filesAmjad Ali Soomro
Ìý
the types of earth quake unit of earth quakes and these slkadfjaslkdjfklasjdfklajsdklfjaslkdfjlas;dfjlksadjflasjd flkasjd lfjsa lkdf jklsadjflk sjdlkf jslkdf jlsdfjlsdjflks jdflkjsadklfj slkdfjlas;dfaskdlf jlasdjflk asdljkfj asldfj lasdjflksajdfkl sajdfsajdklf skldf slkd fjlksdjfla sjdflas jdlfjsdlf jsalkdfj saldjflsajdfklsajlkdfjsalkdfjlsadfjsakldflsa dfjskld fjlksad jfklsajdfjasdlfjaslkdfjsldfjladjsf klasjkldf jaskldfj aslkdjflkasjfdklasasa s asa s d asfd ds fs df dsf a sdf fat able caple bubble
Earthquakes are caused by the sudden release of energy along fault lines in the earth's crust. The effects of earthquakes vary based on their magnitude and can include widespread destruction and loss of life. Seismic waves, including compressional P-waves and shear S-waves, travel outward from the hypocenter or focus of the earthquake. The location of the epicenter at the earth's surface directly above the focus can be determined using seismic data from multiple monitoring stations. Earthquakes are measured on scales such as the Richter scale and Modified Mercalli intensity scale.
EARTHQUAKE AND FAULTS, Epicenter and Focus .pptxDanielManuel26
Ìý
This document provides information about earthquakes and seismic waves. It discusses that earthquakes are caused by the sudden movement of tectonic plates along faults in the earth's crust. It describes the different types of seismic waves produced by earthquakes including P waves, S waves, Love waves, and Rayleigh waves. P waves are compressional waves that move fastest through solid rock. S waves are slower shear waves that only travel through solids. Love and Rayleigh waves are lower frequency surface waves that cause the most ground shaking during an earthquake.
Earthquacke Elastic Rebound Theory Types of WavesShakeel Ahmad
Ìý
1) The document discusses the causes and types of earthquakes. It explains that earthquakes are caused by the sudden release of built-up energy between tectonic plates, which generates seismic waves.
2) It describes the elastic rebound theory of earthquakes, which states that stress gradually builds up along faults until it is suddenly released, causing the plates to snap back in an earthquake.
3) There are different types of seismic waves generated - P waves, S waves, and surface waves including Rayleigh and Love waves. P and S waves travel through the earth's interior as body waves, while surface waves travel along the surface.
1. An earthquake occurs when built-up stress along fault lines in the earth is suddenly released, causing the ground to shake.
2. Seismic waves from earthquakes include P waves, S waves, and surface waves that travel outward from the epicenter and cause damage.
3. Analysis of seismic wave behavior led scientists to determine that the outer core is liquid, helping reveal the structure of the earth's interior.
1. Magnitude measures the energy released at the earthquake source using seismograph measurements, while intensity measures the strength of shaking felt at a location.
2. Earthquake hazards include ground shaking, surface rupture, liquefaction, tsunamis, and landslides. Ground shaking is caused by the release of built-up stress in the lithosphere.
3. To escape a tsunami, immediately evacuate areas near the shore if a large earthquake occurs offshore. Bring a survival kit and head to designated evacuation centers or high ground, staying alert for waves, floods, and landslides.
Earthquakes are caused by the buildup and sudden release of stress along faults within the Earth. As tectonic plates push against each other, stress accumulates until rocks break, causing vibrations called seismic waves. There are three types of faults defined by the direction of rock movement: normal faults occur when rocks pull apart due to tension, reverse faults occur when rocks are pushed together by compression, and strike-slip faults occur when rocks slide past one another due to shear forces. Seismographs are used to measure the seismic waves and locate the epicenter, or surface point above the underground hypocenter where rock movement begins.
The document discusses different types of seismic waves that are produced during earthquakes. There are three main types of seismic waves: P-waves (primary waves), S-waves (secondary waves), and L-waves (surface waves). P-waves are the first to arrive after an earthquake as they travel fastest, pushing and pulling the ground. S-waves arrive next and cause side-to-side shaking. L-waves cause up and down motion and travel along the surface, causing the most damage. Seismographs are used to detect and measure the different seismic waves from an earthquake.
The document discusses different types of seismic waves that are produced during earthquakes. There are three main types of seismic waves: P-waves (primary waves), S-waves (secondary waves), and L-waves (surface waves). P-waves are the first to arrive after an earthquake as they travel fastest, pushing and pulling the ground. S-waves arrive next and cause side-to-side motions. L-waves cause up and down motions and travel along the surface, causing the most damage. The waves radiate out from the hypocenter, where the earthquake initiated underground.
The most devastating earthquake in Philippine history occurred in 1976 in Mindanao, causing over 8,000 deaths. Scientists have warned that a powerful earthquake called the "Big One" could strike the West Valley Fault near Manila, potentially killing 34,000 people. Earthquakes are caused by the sudden release of built-up energy in the Earth's crust from plate tectonics and fault movements, producing seismic waves.
This three paragraph summary provides an overview of key information from the document:
The document discusses different types of faults including dip-slip faults, reverse faults, and strike-slip faults which form at diverging, converging, and transform plate boundaries. Earthquakes occur when built up stress is released along these faults, sending seismic waves. There are three main types of seismic waves: P-waves, S-waves, and surface waves. The 1999 Taiwan earthquake that is the focus of the document measured 7.6 on the Richter scale and caused catastrophic damage across the island.
Deep underground, rocks are under constant pressure until the strain becomes too great and the rocks suddenly break, releasing seismic waves. These waves travel outward from the hypocenter in three types - P waves which push and pull, S waves which move sides to side, and L waves which cause surfaces to bob up and down. When recorded by a seismograph, the first indication of an earthquake is typically the P waves, followed by larger S waves, with surface L waves arriving last.
An earthquake is the result of a sudden release of energy in the Earth's crust that creates seismic waves. Faults are fractures in rock where one side has moved relative to the other. Seismic waves, detected by seismographs, include P-waves, which are longitudinal, and S-waves, which are transverse. Surface waves travel near the Earth's surface and can be the most destructive. The magnitude of most quakes is measured on the Richter scale invented in 1934 by Charles Richter. During quakes, it is safest to drop, cover, and hold on until the shaking stops.
Earthquakes occur when built-up strain within the Earth is released, causing rocks below the surface to suddenly move. This movement releases energy that travels through the Earth in the form of seismic waves. There are three main types of seismic waves: P-waves, which are compression waves that move fastest; S-waves, which are slower shear waves that move the ground from side to side; and surface waves, which cause up and down motion and travel along the Earth's surface. Seismographs are used to detect and measure these different seismic waves to study earthquakes.
WHAT IS AN EARTHQUAKE?
Where Do Earthquakes Happen?
Why Do Earthquakes Happen?
How Are Earthquakes Studied?
How To Locate The Earthquake's Epicenter?
SCALES FOR EARTHQUAKE MEASUREMENT
What Are Earthquake Hazards?
What is seismology and what are seismic waves Ratul Majumdar
Ìý
Seismology is the study of earthquakes and seismic waves that move through the earth. There are two main types of seismic waves - body waves and surface waves. Body waves can travel through the earth's interior layers, while surface waves move along the surface. The two main types of body waves are P waves and S waves. P waves are compressional waves that move through solid rock and fluids, while S waves move rock particles side to side and only travel through solid rock. The two main types of surface waves are Love waves and Rayleigh waves. Love waves move the ground side to side, while Rayleigh waves roll along the surface and move the ground up and down and side to side.
1) The document discusses causes, effects, and measurement of earthquakes. It describes how earthquakes are caused by the sudden release of energy from movement of tectonic plates or volcanic activity.
2) Key terms are defined, such as focus, epicenter, and different types of faults. Different types of seismic waves - P, S, Rayleigh, and Love waves - are also explained.
3) Examples are given of major earthquakes, including the 2005 Kashmir earthquake that killed over 80,000 people in Pakistan, India and Afghanistan.
Earthquacke Elastic Rebound Theory Types of WavesShakeel Ahmad
Ìý
1) The document discusses the causes and types of earthquakes. It explains that earthquakes are caused by the sudden release of built-up energy between tectonic plates, which generates seismic waves.
2) It describes the elastic rebound theory of earthquakes, which states that stress gradually builds up along faults until it is suddenly released, causing the plates to snap back in an earthquake.
3) There are different types of seismic waves generated - P waves, S waves, and surface waves including Rayleigh and Love waves. P and S waves travel through the earth's interior as body waves, while surface waves travel along the surface.
1. An earthquake occurs when built-up stress along fault lines in the earth is suddenly released, causing the ground to shake.
2. Seismic waves from earthquakes include P waves, S waves, and surface waves that travel outward from the epicenter and cause damage.
3. Analysis of seismic wave behavior led scientists to determine that the outer core is liquid, helping reveal the structure of the earth's interior.
1. Magnitude measures the energy released at the earthquake source using seismograph measurements, while intensity measures the strength of shaking felt at a location.
2. Earthquake hazards include ground shaking, surface rupture, liquefaction, tsunamis, and landslides. Ground shaking is caused by the release of built-up stress in the lithosphere.
3. To escape a tsunami, immediately evacuate areas near the shore if a large earthquake occurs offshore. Bring a survival kit and head to designated evacuation centers or high ground, staying alert for waves, floods, and landslides.
Earthquakes are caused by the buildup and sudden release of stress along faults within the Earth. As tectonic plates push against each other, stress accumulates until rocks break, causing vibrations called seismic waves. There are three types of faults defined by the direction of rock movement: normal faults occur when rocks pull apart due to tension, reverse faults occur when rocks are pushed together by compression, and strike-slip faults occur when rocks slide past one another due to shear forces. Seismographs are used to measure the seismic waves and locate the epicenter, or surface point above the underground hypocenter where rock movement begins.
The document discusses different types of seismic waves that are produced during earthquakes. There are three main types of seismic waves: P-waves (primary waves), S-waves (secondary waves), and L-waves (surface waves). P-waves are the first to arrive after an earthquake as they travel fastest, pushing and pulling the ground. S-waves arrive next and cause side-to-side shaking. L-waves cause up and down motion and travel along the surface, causing the most damage. Seismographs are used to detect and measure the different seismic waves from an earthquake.
The document discusses different types of seismic waves that are produced during earthquakes. There are three main types of seismic waves: P-waves (primary waves), S-waves (secondary waves), and L-waves (surface waves). P-waves are the first to arrive after an earthquake as they travel fastest, pushing and pulling the ground. S-waves arrive next and cause side-to-side motions. L-waves cause up and down motions and travel along the surface, causing the most damage. The waves radiate out from the hypocenter, where the earthquake initiated underground.
The most devastating earthquake in Philippine history occurred in 1976 in Mindanao, causing over 8,000 deaths. Scientists have warned that a powerful earthquake called the "Big One" could strike the West Valley Fault near Manila, potentially killing 34,000 people. Earthquakes are caused by the sudden release of built-up energy in the Earth's crust from plate tectonics and fault movements, producing seismic waves.
This three paragraph summary provides an overview of key information from the document:
The document discusses different types of faults including dip-slip faults, reverse faults, and strike-slip faults which form at diverging, converging, and transform plate boundaries. Earthquakes occur when built up stress is released along these faults, sending seismic waves. There are three main types of seismic waves: P-waves, S-waves, and surface waves. The 1999 Taiwan earthquake that is the focus of the document measured 7.6 on the Richter scale and caused catastrophic damage across the island.
Deep underground, rocks are under constant pressure until the strain becomes too great and the rocks suddenly break, releasing seismic waves. These waves travel outward from the hypocenter in three types - P waves which push and pull, S waves which move sides to side, and L waves which cause surfaces to bob up and down. When recorded by a seismograph, the first indication of an earthquake is typically the P waves, followed by larger S waves, with surface L waves arriving last.
An earthquake is the result of a sudden release of energy in the Earth's crust that creates seismic waves. Faults are fractures in rock where one side has moved relative to the other. Seismic waves, detected by seismographs, include P-waves, which are longitudinal, and S-waves, which are transverse. Surface waves travel near the Earth's surface and can be the most destructive. The magnitude of most quakes is measured on the Richter scale invented in 1934 by Charles Richter. During quakes, it is safest to drop, cover, and hold on until the shaking stops.
Earthquakes occur when built-up strain within the Earth is released, causing rocks below the surface to suddenly move. This movement releases energy that travels through the Earth in the form of seismic waves. There are three main types of seismic waves: P-waves, which are compression waves that move fastest; S-waves, which are slower shear waves that move the ground from side to side; and surface waves, which cause up and down motion and travel along the Earth's surface. Seismographs are used to detect and measure these different seismic waves to study earthquakes.
WHAT IS AN EARTHQUAKE?
Where Do Earthquakes Happen?
Why Do Earthquakes Happen?
How Are Earthquakes Studied?
How To Locate The Earthquake's Epicenter?
SCALES FOR EARTHQUAKE MEASUREMENT
What Are Earthquake Hazards?
What is seismology and what are seismic waves Ratul Majumdar
Ìý
Seismology is the study of earthquakes and seismic waves that move through the earth. There are two main types of seismic waves - body waves and surface waves. Body waves can travel through the earth's interior layers, while surface waves move along the surface. The two main types of body waves are P waves and S waves. P waves are compressional waves that move through solid rock and fluids, while S waves move rock particles side to side and only travel through solid rock. The two main types of surface waves are Love waves and Rayleigh waves. Love waves move the ground side to side, while Rayleigh waves roll along the surface and move the ground up and down and side to side.
1) The document discusses causes, effects, and measurement of earthquakes. It describes how earthquakes are caused by the sudden release of energy from movement of tectonic plates or volcanic activity.
2) Key terms are defined, such as focus, epicenter, and different types of faults. Different types of seismic waves - P, S, Rayleigh, and Love waves - are also explained.
3) Examples are given of major earthquakes, including the 2005 Kashmir earthquake that killed over 80,000 people in Pakistan, India and Afghanistan.
The document discusses heat transfer and temperature. It defines heat as the total energy of molecular motion in a substance, while temperature is a measure of the average molecular energy. Heat is transferred between objects or places due to temperature differences by three methods: conduction, convection, and radiation. Factors like a material's conductivity can affect the rate of heat transfer. Heat transfers from warmer objects to cooler ones, changing the thermal energy and temperature of the objects.
Useful environment methods in Odoo 18 - Odoo ºÝºÝߣsCeline George
Ìý
In this slide we’ll discuss on the useful environment methods in Odoo 18. In Odoo 18, environment methods play a crucial role in simplifying model interactions and enhancing data processing within the ORM framework.
Database population in Odoo 18 - Odoo slidesCeline George
Ìý
In this slide, we’ll discuss the database population in Odoo 18. In Odoo, performance analysis of the source code is more important. Database population is one of the methods used to analyze the performance of our code.
Computer Application in Business (commerce)Sudar Sudar
Ìý
The main objectives
1. To introduce the concept of computer and its various parts. 2. To explain the concept of data base management system and Management information system.
3. To provide insight about networking and basics of internet
Recall various terms of computer and its part
Understand the meaning of software, operating system, programming language and its features
Comparing Data Vs Information and its management system Understanding about various concepts of management information system
Explain about networking and elements based on internet
1. Recall the various concepts relating to computer and its various parts
2 Understand the meaning of software’s, operating system etc
3 Understanding the meaning and utility of database management system
4 Evaluate the various aspects of management information system
5 Generating more ideas regarding the use of internet for business purpose
How to use Init Hooks in Odoo 18 - Odoo ºÝºÝߣsCeline George
Ìý
In this slide, we’ll discuss on how to use Init Hooks in Odoo 18. In Odoo, Init Hooks are essential functions specified as strings in the __init__ file of a module.
APM event hosted by the South Wales and West of England Network (SWWE Network)
Speaker: Aalok Sonawala
The SWWE Regional Network were very pleased to welcome Aalok Sonawala, Head of PMO, National Programmes, Rider Levett Bucknall on 26 February, to BAWA for our first face to face event of 2025. Aalok is a member of APM’s Thames Valley Regional Network and also speaks to members of APM’s PMO Interest Network, which aims to facilitate collaboration and learning, offer unbiased advice and guidance.
Tonight, Aalok planned to discuss the importance of a PMO within project-based organisations, the different types of PMO and their key elements, PMO governance and centres of excellence.
PMO’s within an organisation can be centralised, hub and spoke with a central PMO with satellite PMOs globally, or embedded within projects. The appropriate structure will be determined by the specific business needs of the organisation. The PMO sits above PM delivery and the supply chain delivery teams.
For further information about the event please click here.
Prelims of Kaun TALHA : a Travel, Architecture, Lifestyle, Heritage and Activism quiz, organized by Conquiztadors, the Quiz society of Sri Venkateswara College under their annual quizzing fest El Dorado 2025.
Mate, a short story by Kate Grenville.pptxLiny Jenifer
Ìý
A powerpoint presentation on the short story Mate by Kate Greenville. This presentation provides information on Kate Greenville, a character list, plot summary and critical analysis of the short story.
QuickBooks Desktop to QuickBooks Online How to Make the MoveTechSoup
Ìý
If you use QuickBooks Desktop and are stressing about moving to QuickBooks Online, in this webinar, get your questions answered and learn tips and tricks to make the process easier for you.
Key Questions:
* When is the best time to make the shift to QuickBooks Online?
* Will my current version of QuickBooks Desktop stop working?
* I have a really old version of QuickBooks. What should I do?
* I run my payroll in QuickBooks Desktop now. How is that affected?
*Does it bring over all my historical data? Are there things that don't come over?
* What are the main differences between QuickBooks Desktop and QuickBooks Online?
* And more
How to Modify Existing Web Pages in Odoo 18Celine George
Ìý
In this slide, we’ll discuss on how to modify existing web pages in Odoo 18. Web pages in Odoo 18 can also gather user data through user-friendly forms, encourage interaction through engaging features.
APM People Interest Network Conference 2025
-Autonomy, Teams and Tension: Projects under stress
-Tim Lyons
-The neurological levels of
team-working: Harmony and tensions
With a background in projects spanning more than 40 years, Tim Lyons specialised in the delivery of large, complex, multi-disciplinary programmes for clients including Crossrail, Network Rail, ExxonMobil, Siemens and in patent development. His first career was in broadcasting, where he designed and built commercial radio station studios in Manchester, Cardiff and Bristol, also working as a presenter and programme producer. Tim now writes and presents extensively on matters relating to the human and neurological aspects of projects, including communication, ethics and coaching. He holds a Master’s degree in NLP, is an NLP Master Practitioner and International Coach. He is the Deputy Lead for APM’s People Interest Network.
Session | The Neurological Levels of Team-working: Harmony and Tensions
Understanding how teams really work at conscious and unconscious levels is critical to a harmonious workplace. This session uncovers what those levels are, how to use them to detect and avoid tensions and how to smooth the management of change by checking you have considered all of them.
How to attach file using upload button Odoo 18Celine George
Ìý
In this slide, we’ll discuss on how to attach file using upload button Odoo 18. Odoo features a dedicated model, 'ir.attachments,' designed for storing attachments submitted by end users. We can see the process of utilizing the 'ir.attachments' model to enable file uploads through web forms in this slide.
8. EARTHQUAKE
ï‚´ is a sudden movement of the
earth's crust caused by the release
of stress accumulated along
geologic faults or by volcanic
activity which can result to
destruction of properties and the
loss of many lives.
9. EARTHQUAKE
ï‚´is the shaking of the surface of the
Earth resulting from the sudden
release of energy in the Earth’s
lithosphere. The energy will
eventually be released once the
fault overcomes the friction
movement.
10. EARTHQUAKE
ï‚´is brought about by an abrupt slip on a fault, much
like what happens when you snap your fingers.
Going before the snap, you push your fingers
together and sideways. Since you are pushing them
together, friction keeps them from moving to the
side. At the point when you push sideways hard
enough to overcome this friction, your fingers move
unexpectedly, discharging energy in a form of
sound waves that set the air vibrating and travel
from your hand to your ear, where you hear the
snap.
11. TECTONIC EARTHQUAKE VS
VOLCANIC EARTHQUAKE
ï‚´The shifting or movement of the crustal
plates gives rises to tectonic earthquake.
When moves along a fissure, they cause
the earth’s crust to tremble, too. The
magma may reach the surface and when
this happens, a volcanic eruption occurs.
Earthquakes caused by volcanic activity
are called volcanic earthquakes.
12. Since 1968, the Philippine Institute of Volcanology and
Seismology (PHIVOLCS), the government agency overlooking
all seismic and volcanic activities in the Philippines, have
recorded 12 destructive earthquakes. This is largely due the
Philippine’s location within the Pacific Ring of Fire.
The top 10 provinces that are at risk to Earthquakes include:
1. Surigao del Sur 6. Tarlac
2. La Union 7. Ifugao
3. Benguet 8. Davao Oriental
4. Pangasinan 9. Nueva Vizcaya
5. Pampanga 10. Nueva Ecija
16. Tectonic plates
ï‚´are several large solid rocks that
are in constant motion beneath
the earth’s surface.
ï‚´These plates build the
continents and the ocean floors.
17. Theory of Plate Tectonics or the
Continental Drift Theory
ï‚´Alfred Wegener
ï‚´He is most remembered as the originator of the
theory of continental drift by hypothesizing in
1912 that the continents are slowly drifting
around the Earth. He theorized that the
continents once existed as a single landmass ,
which he called Pangaea.
19. What is a FAULT?
ï‚´A fault is a fracture or zone of fractures
between two blocks of rock. Faults allow the
blocks to move relative to each other. This
movement may occur rapidly, in the form of
an earthquake - or may occur slowly, in the
form of creep. Faults may range in length
from a few millimeters to thousands of
kilometers. Most faults produce repeated
displacements over geologic time.
20. What is a FAULT?
ï‚´Faults are thin zones of crushed blocks of
rocks. These are often in centimeters to
thousands of kilometers long. Their surfaces
can be vertical or horizontal. These can
expand into the earth and might possibly
reach out up to the earth's surface. These
are also breaking in the Earth's crust where
rocks on either side of the crack have slid
past each other.
24. FAULTS
ï‚´There are three kinds of faults: strike-
slip, normal, and thrust (reverse)
faults. Each type is the outcome of
different forces pushing or pulling on
the crust, causing rocks to slide up,
down or past each other. The
amount of ground displacement in
an earthquake is called the slip.
26. Dip-slip Fault
ï‚´Occurs when the ground breaks into two
parts, having an angle of about 45º - 65º
with the surface. The lower broken piece is
the footwall while the higher piece is the
hanging wall.
27. Normal Dip-slip Fault
ï‚´This happens when the
hanging wall slowly
moves downward and
away from the footwall.
The fault deepens
through time and when
the movement causes the
hanging wall and the
footwall to be loosely free
from each other, a
sudden earthquake might
occur.
28. Reverse Dip-slip Fault
ï‚´This happens when the
hanging wall moves up
and above the footwall.
Big land areas can be
greatly affected by its
movement. Grdual
change on its movement
makes the hanging wall
much lower than the
footwall, thus, resulting in
an earthquake.
29. Strike-slip Fault
ï‚´This happens when the break formed is
straight, unlike the slanting dip-slip fault.
Here, rocks along the fault are also
colliding past each other, causing a sort of
dislocation in nearby land areas. At first, a
strike-slip fault looks like a shallow crack on
the ground. But because of weathering
and continuous friction and movement
between faults, earthquake occurs.
30. Strike-slip Fault has two types – the
right and left lateral.
ï‚´The left-lateral strike slip fault is
produced when one block continues
to move gradually to the left, while
the right-lateral strike-slip fault occurs
when one block along the fault line
gradually moves rightward.
32. Oblique-slip Fault
ï‚´This happens when
there is a combination
of movements causing
a dip-slip and a strike-
slip fault. This fault is
produced if one block
moves either
downward or upward
while the other block
moves to the left or the
right.
34. ACTIVE FAULT
ï‚´Is likely to cause another earthquake sometime
in the future.
ï‚´Faults are considered to be active if they have
moved one or more times in at least or
within10,000 years.
ï‚´Example of active faults in the Philippines are
the West Valley Fault Line System and the
Philippine Fault, which actually cuts across the
whole country.
35. INACTIVE FAULT
ï‚´Do not show signs of activity in the recent past.
Faults are considered to be inactive if they don’t
experience earthquakes for a very long time or
in the last 10,000 year; however they may be
reactivated by forces acting on the crust or
upper mantle.
36. EPICENTER
ï‚´Is the point on the surface of
the earth located directly
above the center of an
earthquake’s origin. The
center or the source of the
earthquake is called focus.
37. FOCUS
ï‚´Is usually located between the
Earth’s surface to a depth of 700 km.
ï‚´Is the source of energy of the
earthquakes and is also referred to as
hypocenter.
39. 1.Where is the epicenter of
the earthquake?
2.How many individuals are
affected by the
earthquakes?
3.Discuss how devastating a
7.7 intensity earthquake is.
41. ï‚´When rocks move along a fault
they release energy that travels
as vibrations on and in Earth
called seismic waves.
ï‚´These waves originate where
rocks first move along the fault, at
a location inside earth called the
focus.
43. ï‚´Scientists uses wave motion,
wave speed, and the type of
material that the waves travel
through to classify seismic
waves.
ï‚´The three types of seismic
waves – primary, secondary,
and surface (love).
44. PRIMARY WAVES
ï‚´Is also called as P-waves, cause
particles in the ground to move in
push-pull motion similar to a coiled
spring.
ï‚´Are the fastest-moving seismic
waves.
ï‚´They are the first waves that you feel
following an earthquake.
45. SECONDARY WAVES
ï‚´Is also called as S-waves, are
slower than P-waves.
ï‚´cause particles in the ground to
move in up and down at right
angles relative to the direction
the wave travels.
46. SURFACE WAVES
ï‚´Is also called as L-wave or Love
wave.
ï‚´cause particles in the ground to
move in up and down in rolling
motion, similar to ocean waves.
Travels only on Earth’s Surface
closest to the epicenter.
47. ï‚´P-waves and S-waves can
travel through the Earth’s
interior or within the Earth’s
surface.
ï‚´However, scientists have
discovered that S-waves
cannot travel through liquid.
50. SEISMOMETER
ï‚´Instrument that measures and
records ground motion and can be
used to determine the distance
seismic waves.
ï‚´Ground motion is record as a
seismogram, a graphical illustration
of seismic waves .
52. TRIANGULATION
Method use to locate an earthquake’s
epicenter.
ï‚´This method uses the speeds and travel
times of seismic waves to determine the
distance to the earthquake epicenter from
at least three different seismometers.
ï‚´The difference between the time of arrival
of P and S waves in a place is called a lag.
(to determine the distance of the epicenter)
57. Once body waves (P and S-wave)
make it through the earth’s interior,
they are detected by seismographs
when they reach the surface.
The velocity of the waves is determined
by the density of the material that they
pass through, so P-waves travel faster
in solids than in liquids because solids
are denser.
58. As the P-waves pass from crust into
the mantle, their speed suddenly
increases.
The speed change marks a
physical boundary called
discontinuity (caused by a density
difference across the boundary).
59. MOHOROVICIC DISCONTINUITY
- Is the discontinuity between the
crust and the mantle, or the Moho
named after the Croatian
seismologist who discovered it,
Andrija Mohorovicic
60. S-waves behave the same way
from crust into the mantle,
speeding up with the increasing
density, though moving slower
than the P-waves.
61. Through the mantle, the speed of
P-waves continuously increases
with increasing rock density. At a
depth of 2,900 km, their speed
decreases abruptly.
62. GUTENBERG DISCONTINUITY
- Is the boundary between the
solid lower mantle and the liquid
outer core, named after the
German-American seismologist
Beno Gutenberg, who studied
the discontinuity and was also
Charles Richter’s mentor at
Caltech.
63. Because the outer core is liquid, it is
less compact than the mantle even
though it is denser. Thus, once they
enter the outer core, the P-waves are
refracted to about 140º to 180º
distance (arc length).
This leaves an area where P-waves
are not detected on the surface
known as P-wave shadow zone.
64. However, it is not a perfect
shadow zone because some
weak P-wave energy can be
reflected from the solid inner core
and can reach the surface within
the zone.
65. S-waves, however are completely
blocked by the outer core. Seismographs
at 105º to 180º distance (arc length) from
the epicenter do not detect any S-
waves; this is called S-wave shadow
zone. The location of these shadow zones
have been ddetermined by seismologists
who have studies the data received by
seismograph stations all over the world.
68. INTENSITY
ï‚´Tells us how much a certain area was shaken
when the earthquake reached that area.
ï‚´Actual earthquake effect observed in a specific
area.
ï‚´Measure of the degree of shaking and trembling
on that locality.
ï‚´It is greater closer to the epicenter and it
decreases gradually farther and farther from the
epicenter.
69. ROSSI-FORREL SCALE
Used in the Philippines to evaluate earthquake’s
intensity and was modified into PHIVOLCS
Earthquake Intensity Scale (PEIS) ranging from I to
X depending on the effects on people, structures ,
and objetcs.
ï‚´Made by Michele Stefano Conte de Rossi of Italy
and Francis-Alphonse Forrel of Switzerland in 1884.
ï‚´In 1935, Fr. William Repetti modified the scale and
adapted it to Philippine conditions/
71. MODIFIED MERCALLI SCALE
ï‚´A scale of earthquake intensity ranging
from I for an earthquake detected only by
seismographs to XII for one causing total
destruction of all buildings.
ï‚´Named after Guiseppe Mercalli, an Italian
priest and geologist and was use year
1921.
73. MAGNITUDE
ï‚´Is the size of an earthquake which can be
measured by a seismograph.
ï‚´Describes the total munt of energy that was
released by the earthquake at the focus.
ï‚´Mathematical way of comparing the
strength of earthquakes was devised in 1935
by the America seismologist and Physicist
Charles Richter.
74. RICHTER MAGNITUDE SCALE
ï‚´Describes the total amount of
energy that is released by an
earthquake at force. Each
number on the scale rates the
strength of the earthquake and is
not the actual amount of energy
itself.
76. Earth’s Interior
Crust – 5 km to 70 km thick
ï‚´Mantle - 2,890 km thick
Outer core – 2, 266 km thick
ï‚´Inner core - 1, 220 km thick
78. TSUNAMI
ï‚´ Are ocean waves generated by a heavy vertical
movement of water by a strong impact. They cause
great destruction to people and property.
ï‚´ Also known as sea waves.
ï‚´ Caused by strong undersea earthquakes that result to
movement of massive volumes of water above them.
ï‚´ Reaches several meters high up to 30 meters
ï‚´ Volcanic eruption can also produce tsunamis.
ï‚´ Can also be generated from a non-seismic event like
underwater explosion.
79. Locally generated tsunamis
Coastal areas in the Philippines especially those
facing the Pacific Ocean, South China Sea, Sulu
Sea and the Celebes Sea can be affected by
tsunamis that may be generated by local
earthquakes.
This only occurs within a very short time, with the
first wave reaching the shoreline nearest the
epicentre 2 to 5 minutes after the main
earthquake.
80. Some natural signs of an approaching local tsunamis.
ï‚´A felt earthquake
ï‚´Unusual sea level change: sudden
seawater drop or rise
ï‚´Rumbling sound of approaching
waves.
81. BE AWARE, BE PREPARED,
KNOW THE NATURAL
SIGNS OF AN
APPROACHING TSUNAMI
82. What to do BEFORE an earthquake?
ï‚´ Make sure you have a fire extinguisher, first aid kit, a battery-
powered radio, a flashlight, and extra batteries at home.
ï‚´ Learn first aid
ï‚´ Learn how to turn off the gas, water and electricity.
ï‚´ Make up a plan of where to meet your family after an
earthquake.
 Don’t leave heavy objects on shelves (they’ll fall during a
quake).
ï‚´ Anchor heavy furniture, cupboards, and appliances to the
walls or floor.
ï‚´ Learn the earthquake plan at your school or workplace.
83. What to do DURING an earthquake?
ï‚´ Stay calm! If you are indoors, stay inside. If you are outside, stay outside.
 If you’re indoors, stand against a wall near the center of the building,
stand in a doorway, or crawl under heavy furniture (a desk or a table).
Stay away from windows and outside doors
 If you’re outdoors, stay in the open away from power lines or anything
that might fall. Stay away from buildings (stuff might fall off the building
or the building could fall on you).
 Don’t use matches, candles or any flame. Broken gas lines and fire
don’t mix.
 If you’re in a car, stop the car and stay inside the car until the
earthquake stops.
 Don’t use elevators (they probably get stuck anyway).
84. What to do AFTER an earthquake?
ï‚´Check yourself and others for injuries. Provide first aid for
anyone who needs it.
ï‚´Check water, gas, and electric lines for damage. If any
are damaged, shut off the valves. Check for the smell
of gas. If you smell it, open all the windows and doors,
leave immediately, and report it to the authorities.
Turn on the radio. Don’t use the phone unless it’s an
emergency.
ï‚´Stay out of damaged buildings.
ï‚´Ba careful around broken glass and debris. Wear boots
or sturdy shoes to keep from cutting your feet.
85. What to do AFTER an earthquake?
ï‚´Be careful of chimneys (they may fall on you).
ï‚´Stay away from beaches, tsunamis and seiches
sometimes hit after the ground has stopped
shaking.
ï‚´Stay away from damaged areas.
If you’re at school or work, follow the emergency
plan or the instructions of the person in charge.
ï‚´Expect aftershocks.